Tweco Weldskill High Value Mig Gun - Norco MedicalTweco® Weldskill® High Value Mig Gun These guns...
Transcript of Tweco Weldskill High Value Mig Gun - Norco MedicalTweco® Weldskill® High Value Mig Gun These guns...
203
2
Inert Gas Equipment
TwecoVendor Code: TWE
Weldskill®
Tweco® Weldskill® High Value Mig GunThese guns feature a patent-pending design that is easy to maneuver in various welding positions.
The 140 Amp, 180 Amp and 220 Amp guns are perfect for farm, garage, hobby/DIY, artistic metal working, job shops, and maintenance and repair applications.
Features:• Operatorappealwithanergonomichandle featuring a diamond pattern grip.• Handlethatrunscoolerthancomparableguns because there are no brass block inside the handle, making it light weight as well.• Long-lifetriggertestedatover1.2millioncycles without failure.• Ruggedsteelspringstrainrelieffordurabilityand robustness.
• 220Ampsat40%dutycycle.• Typicalapplications:lightfabrication,weldingof HVAC,auto-body,RV/campers,farmequipment.
• 140Ampsat20%dutycycle.• Typicalapplications:DIY,hobby/homeproject welding, repair of household appliances such as grills, metal furniture, ornamental welding, welding of metal fence and iron gates.
• 180Ampsat40%dutycycle.• Typicalapplications:muffler&auto-bodyrepair, gardenandfarmequipmentrepair,architectural metal work, fencing & iron gates.
140 Amp MIG Gun* 180 Amp MIG Gun* 220 Amp MIG Gun*Rear Connector(Replacement)
RearConnector Part No. Stock No. Part No. Stock No. Part No. Stock No. Part No. Stock No.
Tweco WS140T-10-3035 1017-1302 WS180T-12-3035 1017-1306 WS220T-15-3035 1023-1250 350-174H 2035-2110
Miller WS140M-10-3035 1017-1303 WS180M-12-3035 1017-1307 WS220M-15-3035 1023-1251 350-174MH 2035-2111
Lincoln WS140L-10-3035 1017-1304 WS180L-12-3035 1017-1308 WS220L-15-3035 1023-1252 350-174HXL 2035-2116
Hobart WS140H-10-3035 1017-1312 WS180H-12-3035 1017-1313 – – MK35-130H 2000-2835
Euro-Kwik WS140X-10-3035 1017-1305 WS180X-12-3035 1017-1309 WS220X-15-3035 1023-1253 174EX-1 2040-2276
MIG Gun Styles
*Rear connector supplied as standard.
Common, standard Tweco 11 Series front end.
Jacketed, durable, thick-walled brass tube to protect patented through-the-tube Cablehoz®.
Rugged, long-life trigger lasts over ONE million cycles.
Cool-hand gun handle runs cooler for operator comfort.
Steel spring strain relief adds durability and robustness to handle connection.
Lightweight & ergonomic handle design provides operator comfort, similar to popular Spray Master®.
Steel Spring Strain Relief
Handle (Half)
Long-life Trigger
Cablehoz
Cablehoz
Brass Jacketed Tube
Diffuser Adapter
Brass Jacketed Tube
InsulatorDiffuserAdapter
Diffuser Adapter Crimped & Embedded in Insulator for Improved Durability
Cross Section Superior engineering and features
204
2
Iner
t Gas
Equ
ipm
ent
Weldskill®
MIG Machine Compatibility - Back end options to work with many popular welding machines
THERMAL ARC® / FIREPOWER® MILLER® ELECTRIC LINCOLN® ESAB®
Fabricator 140*Fabricator 180** Use w/ 350-174-TA180Firepower 135‡‡Use w/ WS140TV-10-3035
Fabricator 190†Fabricator 210††Use w/ WM354MFFirepower 165‡
Millermatic 130Millermatic 130XPMillermatic 135Millermatic 140Millermatic 150Millermatic 155Millermatic 175
Millermatic 180Millermatic 185Millermatic 200Millermatic 210Millermatic 211Millermatic 212
Easy-Core 125Easy-MIG 180Easy-MIG 140MIG-Pak 140MIG-Pak 180Powermig 140CPowermig 180CPro-Core 125
Pro-MIG 140Pro-MIG 180SP140TSP180TWeld-Pak 125HDWeld-Pak 140HDWeld-Pak 180HD
MigMaster 173MigMaster 160
LINCOLN®
HOBART®HOBART®SP100
SP100TSP125PLUS
SP130SP170TSP175PLUS Handler 210
Ironman 210Trek 180
Handler 130XLHandler 135Handler 140
Handler 175Handler 187
WS140T WS180T WS220T WS140M WS180M WS220M WS140L WS180L WS220L WS140X WS180X WS220X
WS140H WS180H
Item No. Part No. Stock No. Description1 WS21-50F 1210-1346 Nozzle2 WS11-35 1110-1142 Contact Tip3 WS51 1510-1140 Gas Diffuser
4WS80-140 2042-2050 Handle with Screws (WS140 Series)WS80-180 2042-2051 Handle with Screws (WS180 Series)WS80-220 2042-2052 Handle with Screws (WS220 Series)
5 WS90 2042-2053 Microswitch with Lead Wires6 WS90-LEV 2042-2054 Trigger Lever
NOZZLES GASDIFFUSER
CONTACTTIPS
CONDUCTORTUBE
WS1135
WS11H35
WS1130
WS1123
WS51
STANDARD
OPTIONAL
WS2150F
WS2150
WS2137
WS2137T
WS2162
Consumables
Item No. Part No. Stock No. Description7 WS90-LEV-S 2042-2055 Trigger Lever Spring (pkg. 5 each)
8
350-174H 2035-2110 Rear Connector Plug - Tweco350-174MH 2035-2111 Rear Connector Plug - Miller350-174HXL 2035-2116 Rear Connector Plug - LincolnMK35-130H 2000-2835 Rear Connector Plug - Hobart
9 WS42-3035-15 1420-1140 Conduit Assembly
1035K-350-1 2000-2352 Control Wire - TwecoWM354-M 2030-2075 Control Wire - Miller & Lincoln
TwecoVendor Code: TWE
205
2
Inert Gas Equipment
Spray Master™ Air Cooled MIG Gun
350/450 AMP Gun Assemblies
Part No. Stock No. Part No. Stock No. Description350 AMP 450 AMPWith Tweco® Rear Connections
MS310-116 1036-1610 MS410-116 1040-1050 .045" - 1/16" 1.2-1.6 mm 10'/ 3 m cable
MS312-116 1036-1613 MS412-116 1040-1051 .045" - 1/16" 1.2-1.6 mm 12'/ 4 m cable
MS315-116 1036-1615 MS415-116 1040-1052 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable
MS315-116K4 1036-1715 MS415-116K4 1040-1530 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable*
MS315-116DSRS 1036-1721 MS415-116DSRS 1040-1537 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable**
MS425-116 1040-1058 .045" - 1/16" 1.2-1.6 mm 25'/ 8 m cableWith Miller® Rear Connections
MS310M-116 1036-1635 MS410M-116 1040-1060 .045" - 1/16" 1.2-1.6 mm 10'/ 3 m cable
MS312M-116 1036-1638 MS412M-116 1040-1061 .045" - 1/16" 1.2-1.6 mm 12'/ 4 m cable
MS315M-116 1036-1640 MS415M-116 1040-1062 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable
MS315-116K4 1036-1716 MS415-116K4 1040-1531 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable***
MS315-116DSRS 1036-1720 MS415-116DSRS 1040-1536 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable**
MS325M-116 1036-1642 MS425M-116 1040-1068 .045" - 1/16" 1.2-1.6 mm 25'/ 8 m cableWith Euro-Kwik® Rear Connections
MS410X-116 1040-1075 .045" - 1/16" 1.2-1.6 mm 10'/ 3 m cable
MS412X-116 1040-1076 .045" - 1/16" 1.2-1.6 mm 12'/ 4 m cable
MS315X-116 1036-1623 MS415X-116 1040-1077 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cableWith Lincoln Rear Connections
MS410L-116 1040-1070 .045" - 1/16" 1.2-1.6 mm 10'/ 3 m cable
MS312L-116 1036-1646 .045" - 1/16" 1.2-1.6 mm 12'/ 4 m cable
MS315L-116 1036-1647 MS415L-116 1040-1072 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable
MS315L-116K4 1036-1717 MS415L-116K4 1040-1533 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable***
MS315L-116DSRS 1036-1722 MS415L-116DSRS 1040-1538 .045" - 1/16" 1.2-1.6 mm 15'/ 5 m cable
MS425L-116 1040-1071 .045" - 1/16" 1.2-1.6 mm 25'/ 8 m cable
* w/locking trigger ** w/dual schedule trigger *** w/knucklehead option
Part No. Stock No. DescriptionWith Tweco® Rear Connections
MS210-3545 1023-1100 .035 - .045" 0.9-1.2 mm 10'/ 3 m cable
MS212-3545 1023-1101 .035 - .045" 0.9-1.2 mm 12'/ 4 m cable
MS215-3545 1023-1102 .035 - .045" 0.9-1.2 mm 15'/ 5 m cable
MS220-3545 1023-1103 .035 - .045” 0.9-1.2 mm 20’/ 6 m cable
MS225-3545 1023-1108 .035 - .045" 0.9-1.2 mm 25'/ 8 m cableWith Miller® Rear Connections
MS210M-3545 1023-1110 .035" - .045" 0.9-1.2 mm 10'/ 3 m cable
MS212M-3545 1023-1111 .035" - .045" 0.9-1.2 mm 12'/ 4 m cable
MS215M-3545 1023-1112 .035" - .045" 0.9-1.2 mm 15'/ 5 m cable
MS220M-3545 1023-1113 .035” - .045” 0.9-1.2 mm 20’/ 6 m cable
MS225M-3545 1023-1118 .035" - .045" 0.9-1.2 mm 25'/ 8 m cableWith Euro-Kwik® Rear Connections
MS210X-3545 1023-1125 .035" - .045" 0.9-1.2 mm 10'/ 3 m cable
MS212X-3545 1023-1126 .035" - .045" 0.9-1.2 mm 12'/ 4 m cable
MS215X-3545 1023-1127 .035" - .045" 0.9-1.2 mm 15'/ 5 m cable
MS225X-3545 1023-1133 .035" - .045" 0.9-1.2 mm 25'/ 8 m cableWith Lincoln Rear Connections
MS212L-3545 1023-1136 .035" - .045" 0.9-1.2 mm 12'/ 4 m cable
250 AMP Gun Assemblies
TwecoVendor Code: TWE
206
2
Iner
t Gas
Equ
ipm
ent
Spray Master™ Air Cooled MIG Gun
Spray Master™ MIG Gun Replacement Parts
No. 250 AMP 350 AMP 450 AMP Description1 Nozzles (not shown)2 Contact Tips (not shown)3 Diffusers (not shown)
4 63J-31630-1121
66J-31660-1836 Nozzle Insulators
5 Conductor Tubes (not shown)
6 1522020-2152 Gun Hanger
7 MS842060-2130 Handle (Standard)
8 MS84LC2060-2127 Handle (Locking Trigger)
9 MS84DSRS2606-2128 Handle (Dual Schedule)
10 ELC124FM2060-2646 Binder Posts & Screws
11 122FMS2020-2123 Binder Posts & Screws
12 MS94RSW2060-2694
Rocker Switch (Dual Schedule)
13 ELC94-BL2060-2671 Trigger Blade Assembly
14 ELC942060-2647 Trigger (Standard)
15 MS94LC2060-2693 Trigger (Locking)
16 1362060-2690 Cable Clamp
17 MS1442060-2131
Front Strain Relief Spring & Cap
18
MS2101720-2115
MS3101730-2035
MS4101740-2115
Cablehoz Assembly (Direct Plug)
MS2121720-2116
MS3121730-2036
MS4121740-2116
MS2151720-2117
MS3151730-2037
MS4151740-2117
MS2251720-2118
MS3251730-2038
MS4251740-2118
MS210X1720-2106
MS310X1730-2010
MS410X1740-2121
Cablehoz Assembly (Euro)
MS212X1720-2107
MS312X1730-2011
MS412X1740-2122
MS215X1720-2108
MS315X1730-2012
MS415X1740-2123
MS225X1720-2109
MS325X1730-2013
MS425X1740-2124
19 235RSSR2060-2035
Rear Strain Relief Spring & Cap
20 MS102-RK2060-2132
MS104-RK2060-2133
Front Cable Connector Repair Kit (Direct Plug and Euro)
21
EPG172-H2020-2191
350-170HK2035-2169
Rear Cable Connector Repair Kit (Direct Plug)
172X-M2020-2181
174X-M2040-2181
Rear Cable Connector Repair Kit (Euro)
22
C6RC2060-2041 Rear Case (Direct Plug)
X6RC2060-2006 Rear Case (Euro)
23 MS354-DSM2060-2140 Miller Control Wire
24 Connector Plug (not shown)25 Conduit Assembly (not shown)
NS TCR509900-1150
Protective Cable Wrap (50ft/box)
TwecoVendor Code: TWE
207
2
Inert Gas Equipment
250 Amp - Spray MasterTM Mig Gun
450 Amp - Spray MasterTM Mig Gun
Spray Master™ Air Cooled MIG Gun
TwecoVendor Code: TWE
208
2
Iner
t Gas
Equ
ipm
ent
250 AMP GunsFits Diffuser HD52-11 (1520-1130)
Nozzle Style 3/8"9.5 mm bore
1/2" 12.7 mm bore
5/8" 15.9 mm bore
Standard slip-on type(1/8" tip recess)
HD22-371220-1305
HD22-501220-1306
HD22-621220-1307
Optional slip-on type(tip flush)
HD22-37F1220-1310
HD22-50F1220-1311
HD22-62F1220-1312
Contact TipsWire SizeIn. / Metric
Tip I.D.In. / Metric 250 AMP 350 & 450 AMP
.023"0.6 mm
.031"0.79 mm
11-231110-1100
.030"0.8 mm
.038"0.97 mm
11H-301110-1201
.035"0.9 mm
.044"1.12 mm
11H-351110-1202
16S-351160-1102
.040"1.0 mm
.048"1.22 mm
11H-401110-1203
16S-401160-1103
.045"1.2 mm
.054"1.37 mm
11H-451110-1204
16S-451160-1104
.052"1.3 mm
.064"1.65 mm
16S-521160-1105
1/16"1.6 mm
.073"1.85 mm
16S-1161160-1106
5/64"2.0 mm
.090"2.29 mm
16S-5641160-1109
3/64" AL1.2 mm
.059"1.50 mm
11AH-3641110-1213
16AS-3641160-1113
1/16" AL1.6 mm
.082"2.08 mm
16AS-1161160-1114
* 250 AMP guns ship w/ standard 1/2" / 12.7 mm bore nozzle Part No. HD22-50 (1220-1306) and 11H Series Contact Tip
Spray Master™ Consumables
ConduitWire SizeIn. / Metric 250 AMP Wire Size
In. / Metric 350 & 450 AMP
For Use With Steel Wire
.023"0.6 mm
42-23-151420-1103
.035" / .045"0.9 / 1.2 mm
44-3545-151440-1103
.030" / .035"0.8 / 0.9 mm
42-3035-151420-1113
.035" / .045"0.9 / 1.2 mm
44-3545-251440-1105
.040" / .045"1.0 / 1.2 mm
42-4045-151420-1123
.052" / 1/16"1.3 / 1.6 mm
44-116-151440-1113
.040" / .045"1.0 / 1.2 mm
42-4045-251420-1125
.052" / 1/16"1.3 / 1.6 mm
44-116-251440-1115
5/64"2.0 mm
44-564-151440-1123
For Use With Aluminum Wire
.035" / 3/64"0.9 / 1.2 mm
42N-3545-151420-1003
.030" / 3/64" 0.8" / 1.2 mm
44N-3545-151440-1003
Nozzles
350 AMP GunsFits Diffuser EL52CT-16 (1560-1107)
Nozzle Style 3/8"9.5 mm bore
1/2"12.7 mm bore
5/8" 15.9 mm bore
3/4"19.1 mm bore
Standard CT type(1/8" tip recess)
EL22CT-371260-1625
EL22CT-501260-1626
EL22CT-621260-1627
EL22CT-751260-1628
Optional CT type(tip flush)
EL22CT-37F1260-1635
EL22CT-50F1260-1636
EL22CT-62F1260-1637
Optional CT type(tip protruded)
EL22CT-50P1260-1691
EL22CT-62P1260-1692
Optional CT type(heavy duty)
EL22CT-62H1260-1629
* 350 AMP guns ship w/ standard 5/8" / 15.9 mm bore nozzle Part No. EL22CT-62 (1260-1627) and 16S Series Contact Tip
Nozzle Style 1/2"12.7 mm bore
5/8" 15.9 mm bore
3/4" 19.1 mm bore
Standard slip-on type(1/8" tip recess)
HD24L-501240-1200
HD24L-621240-1201
HD24L-751240-1202
Optional slip-on type(tip flush)
HD24L-50F1240-1204
HD24L-62F1240-1205
HD24L-75F1240-1206
Optional slip-on type(1/8" tip recess) heavy duty
HD24-501240-1240
HD24-621240-1241
HD24-751240-1242
Optional slip-on type(tip flush) heavy duty
HD24-62F1240-1236
HD24-75F1240-1237
450 AMP GunsFits Diffuser HD54-16 (1540-1136)
* 450 AMP guns ship w/ standard 5/8" / 15.9 mm bore nozzle Part No. HD24L-62 (1240-1201) and 16S Series Contact Tip
TwecoVendor Code: TWE
209
2
Inert Gas Equipment
No. 2 MIG Gun Assemblies with ‘Standard’ Consumables200 AMP Air Cooled
No. 3 MIG Gun Assemblies with ‘Standard’ Consumables300 AMP Air Cooled
Description Part No. Stock No. Part No. Stock No.w/ Tweco® Rear Connection(Requires Adapter Plug)
w/ Euro-Kwik®
Rear Connection
.045" / 1.2 10' / 3 m cable 310-3545 1030-1101 X310-3545 1030-1601
.045" / 1.2 12' / 4 m cable 312-3545 1030-1102 X312-3545 1030-1602
.045" / 1.2 15' / 5 m cable 315-3545 1030-1103
.045” / 1.2 20’ / 5 m cable 320-3545 1030-1104
.045” / 1.2 25’ / 5 m cable 325-3545 1030-1105
1/16" / 1.6 15' / 5 m cable 315-116 1030-1113
1/16” / 1.6 25’ / 5 m cable 325-116 1030-1115w/ Miller® Connection w/ Lincoln® Rear Connection
.045" / 1.2 10' / 3 m cable M310-3545 1030-1130 L310-3545 1030-1140
.045" / 1.2 12' / 4 m cable M312-3545 1030-1133 L312-3545 1030-1143
.045" / 1.2 15' / 5 m cable M315-3545 1030-1136 L315-3545 1030-1146
Description Part No. Stock No. Part No. Stock No.w/ Tweco® Rear Connection(Requires Adapter Plug)
w/ Euro-Kwik®
Rear Connection
.035" / 0.9 10' / 3 m cable 210-3035 1020-1111
.035" / 0.9 12' / 4 m cable 212-3035 1020-1112
.035" / 0.9 15' / 5 m cable 215-3035 1020-1113
.045" / 1.2 10' / 3 m cable 210-4045 1020-1121 X210-4045 1020-1621
.045" / 1.2 12' / 4 m cable X212-4045 1020-1622
.045" / 1.2 15' / 5 m cable 215-4045 1020-1123 X215-4045 1020-1623
.045" / 1.2 15' / 5 m cable 215-4045K4 1020-1660w/ Miller® Connection w/ Lincoln® Rear Connection
.035" / 0.9 10' / 3 m cable M210-3035 1020-1130 L210-3035 1020-1140
.035" / 0.9 12' / 4 m cable M212-3035 1020-1132 L212-3035 1020-1142
.035" / 0.9 15' / 5 m cable M215-3035 1020-1134 L215-3035 1020-1144
.045" / 1.2 10' / 3 m cable M210-4045 1020-1131
.045" / 1.2 12' / 4 m cable M212-4045 1020-1133
.045" / 1.2 15' / 5 m cable M215-4045 1020-1135
.045" / 1.2 15' / 5 m cable M215-4045K4 1020-1661
No. 1, 2 & 3 MIG Gun Assemblies
* No. 2 guns ship w/ standard 1/2" / 12.7 mm bore nozzle Part No. 22-50 (1220-1110), nozzle insulator Part No. 32 (1320-1100) and 14 Series Contact Tip
* No. 3 guns ship w/ standard 5/8" / 15.9 mm bore nozzle Part No. 23-62 (1230-1120) and 14 Series Contact Tip
No. 1 MIG Gun Assemblies with ‘Standard’ Consumables160 AMP Air Cooled
Description Part No. Stock No. Part No. Stock No.w/ Tweco® Rear Connection(Requires Adapter Plug)
w/ Euro-Kwik®
Rear Connection
.035" / 0.9 10'/ 3 m cable 110-3035 1010-1111
.035" / 0.9 12'/ 4 m cable 112-3035 1010-1112
.035" / 0.9 15'/ 5 m cable 115-3035 1010-1113
.035” / 0.9 20’/ 6 m cable 120-3035 1010-1114
.045" / 1.2 10'/ 3 m cable 110-4045 1010-1121 X110-4045 1010-1621
.045" / 1.2 12'/ 4 m cable X112-4045 1010-1622
.045" / 1.2 15'/ 5 m cable 115-4045 1010-1123 X115-4045 1010-1623
.045” / 1.2 20’/ 6 m cable 120-4045 1010-1124w/ Miller® Connection w/ Lincoln® Rear Connection
.035" / 0.9 10'/ 3 m cable M110-3035 1010-1131
.035" / 0.9 12'/ 4 m cable M112-3035 1010-1133
.035" / 0.9 15'/ 5 m cable M115-3035 1010-1135 L115-3035 1010-1145
* No. 1 guns ship w/ standard 1/2" / 12.7 mm bore nozzle Part No. 21-50 (1210-1110) and 11 Series Contact Tip
No. 2
No. 1
No. 3
TwecoVendor Code: TWE
210
2
Iner
t Gas
Equ
ipm
ent
No. 4 & 5 MIG Gun Assemblies
No. 4 MIG Gun Assemblies with ‘Standard’ Consumables 400 AMP Air Cooled
No. 4
Description Part No. Stock No. Part No. Stock No.w/ Tweco® Rear Connection(Requires Adapter Plug)
w/ Euro-Kwik®
Rear Connection.045" / 1.2 10'/ 3 m cable 410-3545 1040-1101 X410-3545 1040-1601.045" / 1.2 12'/ 4 m cable 412-3545 1040-1102 X412-3545 1040-1602.045" / 1.2 15'/ 5 m cable 415-3545 1040-1103 X415-3545 1040-1603.045” / 1.2 15’/ 5 m cable (knucklehead option)
415-3545K4 1040-1686
1/16" / 1.6 10'/ 3 m cable 410-116 1040-1111
1/16" / 1.6 12'/ 4 m cable 412-116 1040-11121/16" / 1.6 15'/ 5 m cable 415-116 1040-1113 X415-116 1040-16135/64" / 2.0 15'/ 5 m cable 415-564 1040-1123
w/ Miller® Connection w/ Lincoln® Rear Connection.045" / 1.2 10'/ 3 m cable M410-3545 1040-1130 L410-3545 1040-1140.045" / 1.2 12'/ 4 m cable M412-3545 1040-1133 L412-3545 1040-1143.045" / 1.2 15'/ 5 m cable M415-3545 1040-1136 L415-3545 1040-1146.045” / 1.2 15’/ 5 m cable (knucklehead option)
M415-3545K4 1040-1688
.045” / 1.2 15’/ 5 m cable L415-3545K4 1040-16891/16" / 1.6 10'/ 3 m cable M410-116 1040-1131 L410-116 1040-11411/16" / 1.6 12'/ 4 m cable M412-116 1040-1134 L412-116 1040-11441/16" / 1.6 15'/ 5 m cable M415-116 1040-1137 L415-116 1040-11475/64" / 2.0 15'/ 5 m cable M415-564 1040-1138
No. 5 MIG Gun Assemblies with ‘Standard’ Consumables500 AMP Air Cooled
Note: All No.5 MIG Guns are furnished with 5" Radius conductor tubes.
Description Part No. Stock No. Part No. Stock No.w/ Tweco® Rear Connection(Requires Adapter Plug)
w/ Euro-Kwik®
Rear Connection1/16" / 1.6 15'/ 5 m cable 515-116 1050-1113 X515-116 1050-16131/16” / 1.6 25’/ 8 m cable 525-116 1050-11153/32" / 2.4 10'/ 3 m cable 510-332 1050-1131
3/32" / 2.4 15'/ 5 m cable 515-332 1050-1133w/ Miller® Connection w/ Lincoln® Rear Connection
1/16" / 1.6 15'/ 5 m cable M515-116 1050-11733/32" / 2.4 15'/ 5 m cable L515-332 1050-1642
No.5
* No. 4 guns ship w/ standard 5/8" / 15.9 mm bore nozzle Part No. 24A-62 (1240-1120), nozzle insulator Part No. 34A (1340-1100) and 14 Series Contact Tip.
* No. 5 guns ship w/ standard 5/8" / 15.9 mm bore nozzle Part No. 25CT-62 (1250-1420), nozzle insulator Part No. 35CT (1350-1400) and 15H Series Contact Tip
No. 6 MIG Gun Assemblies with ‘Standard’ Consumables 600 AMP Air Cooled
Note: All No.6 Mig-Guns are furnished with 5" radius conductor tubes.
Description Part No. Stock No.w/ Tweco® Rear Connection(Requires Adapter Plug)
3/32" / 2.4 15'/ 5 m cable 615-332 1060-1217w/ Miller® Connection
3/32" / 2.4 15'/ 5 m cable M615-332 1060-1242
No. 6
* No. 6 guns ship w/ standard 3/4" / 19.1 mm bore nozzle Part No. 26CT-75 (1260-1430), nozzle insulator Part No. 36CT (1360-1400) and 16S Series Contact Tip
TwecoVendor Code: TWE
211
2
Inert Gas Equipment
No. 1- 6 MIG Gun Replacement Parts
Professional #1, #2, #3, #4, #5 & #6 MIG-Gun Replacement Parts
TwecoVendor Code: TWE
212
2
Iner
t Gas
Equ
ipm
ent
No.1 - 6 MIG Gun Replacement Parts
Item No. Description No. 1 No. 2 No. 3 No. 4 No. 5 No. 6
1 Nozzles Standard consumable parts
2 Contact Tips Standard consumable parts
3 Diffusers Standard consumable parts
4 Nozzle Insulators Standard consumable parts
5 Conductor Tubes Standard consumable parts
6Gun Hanger 0152
2020-21520154
2040-2154
7
Handle Assembly - (Standard) 00812010-2081
00832030-2083
084A2040-2084
00852050-2085
Handle Assembly - (Dual Schedule) N/A 84DS2040-2085
N/A
8BinderPost&Screw-(4Required) 122FM
2020-2122124FM
2040-2124
9
Trigger Control Wire Terminal - (Standard - 2 EA)
244DS2040-2245
02442040-2224
Trigger Control Wire Terminal - (Dual Schedule - 4 EA)
N/A 244LK2040-2246
N/A
10Trigger Assembly - (Standard) 0091
2010-20910092
2020-2092094R
2040-2096
11Trigger Blades 091C
2010-2093092C
2020-2094094C
2040-2093
12Trigger Assembly - (Dual Schedule) N/A 94LK-DS
2040-2099
13Trigger Assembly - (Locking) N/A 94L
2040-2094
14Front Cable Connector 101R
2010-21030102
2020-21020104
2040-2104
15Cable Clamp 0136
2060-2690
16Front Strain Relief Spring 141-6-SPR
2010-2143142-6-SPR2020-2144
144-6-SPR2040-2146
145-6-SPR2050-2147
17Cablehoz 0200
1720-21000300
1730-21000400
1740-21000500
1750-2100600S
1760-2100
18Rear Strain Relief Spring 235RSSR
2060-2035
19
Rear Case - Direct Plug R6RC2060-2040
Rear Case - Euro X6RC2060-2006
20
Control Wire - (Standard) MS354-DSM2060-2140
Control Wire - (Dual Schedule) 194DS2040-2195
21
Rear Cable Connector - Direct Plug 01042040-2104
Rear Cable Connector - Euro 172X-M2020-2181
174X-M2040-2181
176X-M2060-2181
22Adapter - Direct Plug M170-2H
2020-2165M170-4H
2020-2166M170-5H
2020-216723 Connector Plug
24 Conduit Assembly Standard consumable parts
NSProtective Cable Wrap (50Ft/Box) TCR50
9900-1150
Professional #1, #2, #3, #4, #5 & #6 MIG-Gun Replacement Parts
TwecoVendor Code: TWE
213
2
Inert Gas Equipment
MIG Gun Direct Plug and Control Wire Jumpers
MIG Gun Direct Plug and Control Wire Jumpers
TWECO STYLE 100-450 AMP 500-600 AMP
Item No. DescriptionPart No.
Stock No.Part No.
Stock No.
1Connector Plug
350-174H2035-2110
176SH2060-2177
Connector Plug (Extra Long)350-174HXL2035-2116
N/A
2O-Ring Only (Package of 10)
224S2064-2059
225S2050-2226
3Set Screw Only (Package of 10)
44CS2040-2046
4Thermal Arc Control Jumper Cord
MS-354-TAJ2060-2139
MILLER STYLE 100-450 AMP 500-600 AMP
Item No. DescriptionPart No.
Stock No.Part No.
Stock No.
1Connector Plug
350-174MH2035-2111
EL176MH2060-2178
Connector Plug (Extra Long)350-174MHXL
2035-2114N/A
2 Wire Guide Assembly Only174M-N
2040-2184175M-N
2050-2178
3O-Ring Only (Package of 10)
224S2064-2059
4Set Screw Only (Package of 10)
44CS2040-2046
LINCOLN STYLE 100-450 AMP 500-600 AMP
Item No. DescriptionPart No.
Stock No.Part No.
Stock No.
1 Connector Plug350-174LH2035-2112
EL176LH2060-2680
2 Gas Nipple35-170-5
2000-2046
3Set Screw Only(Package of 10)
44CS2040-2046
4 Gas Hose With ClampAK353
2642-2300
5 Gas Hose Clamp OnlyAK-353-2A2642-2302
6 Lincoln Control Jumper CordMS354DS-LJ2060-2137
TwecoVendor Code: TWE
214
2
Iner
t Gas
Equ
ipm
ent
38 37 36 32
323118343539
No.1, 2, 3, 4, & 5 MIG Gun Replacement Parts / Wire Conduits - All Guns
All Euro-Kwik® MIG Guns
Item No. Description No. 1 No. 2 No. 3 No. 4 No. 5 No. 6
31Rear support(Euro-Kwik® guns)
350R-230-102035-2235
350R-230-102035-2235
350R-230-102035-2235
350R-230-102035-2235
350R-230-102035-2235
350R-230-102035-2235
32Rear Case (Euro-Kwik® guns)
X6RC2060-2006
X6RC2060-2006
X6RC2060-2006
X6RC2060-2006
X6RC2060-2006
X6RC2060-2006
34Power connection(Euro-Kwik® guns)
172X-M2020-2181
172X-M2020-2181
172X-M2020-2181
172X-M2020-2181
35Rear connector(Euro-Kwik® guns)
174EX-12040-2276
174EX-12040-2276
174EX-12040-2276
174EX-12040-2276
174EX-12040-2276
174EX-12040-2276
36 Screw4-MS2011-2004
4-MS2011-2004
4-MS2011-2004
4-MS2011-2004
4-MS2011-2004
4-MS2011-2004
37O-ringEuro-Kwik® guns
174EX-1G2040-2282
174EX-1G2040-2282
174EX-1G2040-2282
174EX-1G2040-2282
174EX-1G2040-2282
174EX-1G2040-2282
38 Conduit cap Euro-Kwik® guns174EX-1C2040-2279
174EX-1C2040-2279
174EX-1C2040-2279
174EX-1C2040-2279
174EX-1C2040-2279
174EX-1C2040-2279
39Connector nutEuro-Kwik® guns
174X-22040-2177
174X-22040-2177
174X-22040-2177
174X-22040-2177
174X-22040-2177
174X-22040-2177
*TF liners not recommended for lengths over 10'/ 3 m
Wire SizeMINI-MIG Gun (All Models) No. 1 & 2 (All Models) No. 3 & 4
(All Models & No. 5 X-Guns)No. 5 & 6 (All Except X-Guns)
15' / 5 m 20' / 6 m 15' / 5 m 25' / 8 m 15' / 5 m 25' / 8 m 15' / 5 m 25' / 8 m .023"0.6 m
23-40-151400-1123
42-23-151420-1103
.030" - .035"0.8-0.9 mm
35-40-151400-1133
35-40-201400-1134
42-3035-151420-1113
42-3035-251420-1115
.040" - .045"1.0-1.2 mm
45-40-151400-1143
42-4045-151420-1123
42-4045-251420-1125
.035" - .045"0.9-1.0 mm
44-3545-151440-1103
44-3545-251440-1105
45-3545-151450-1103
45-3545-251450-1105
.052" - 1/16"1.3-1.6 mm
44-116-151440-1113
44-116-251440-1115
45-116-151450-1113
45-116-251450-1115
5/64"2.0 mm
44-564-151440-1123
44-564-251440-1125
45-564-151450-1123
45-564-251450-1125
3/32"2.4 mm
45H-332-151450-1133
7/64"2.8 mm
45H-764-151450-1143
1/8"3.2 mm
45-18-151450-1153
.030" - .035" AL0.8 - 0.9 mm
35TF-40-10*1400-1031
42N-3545-151420-1003
44N-3545-151440-1003
45N-3545-151450-1003
1/16"1.6 mm
44N-116-151440-1012
45N-116-151450-1013
Wire Conduits - All Guns
Part No. 44-3545-15
Part No. 42-3035-15
TwecoVendor Code: TWE
215
2
Inert Gas Equipment
Standard Nozzles & Nozzle Insulators - All Guns
Gun Model Nozzle Style Insulator 3/8" / 9.5 mm Bore 1/2" / 12.7 mm Bore 5/8" / 15.9 mm Bore 3/4" / 19.1 mm Bore
21 Series
Mini-Mig-Gun(Standard)
Self-insulated, tip flush21-37-F1210-1102
21-50-F1210-1112
21-62-F1210-1122
No. 1(Standard)
Self-insulated, 1/8" tip recess21-371210-1100
21-501210-1110
21-621210-1120
Optional, tapered, self-insulated, (*1/8" tip recess), (**tip flush)
21T-37*1210-130021T-37-F**1210-1302
22 Series: * 034A Insulator must be used with this series nozzle.
No.2(Standard)
Adjustable, recess to projection00321320-1100
22-501220-1110
22-621220-1120
Optional, short-stop, 1/8" tip recess
00321320-1100
22-37-SS1220-1101
22-50-SS1220-1111
22-62-SS1220-1121
23 Series: * Use 52FN diffuser with this series on a #2 MIG gun.
No. 3(Standard)
Self-insulated, 1/8" tip recess23-371230-1100
23-501230-1110
23-621230-1120
23-751230-1130
Self Insulated, 3/8" tapered23T-371230-1300
Optional, self-insulated, tip flush23-37-F1230-1102
23-50-F1230-1112
23-62-F1230-1122
23-75-F1230-1132
Optional, heavy duty self-insulated,1/8" tip recess
23H-501230-1210
23H-621230-1220
23H-751230-1230
Optional, heavy duty self-insulated,tip flush
23H-62-F1230-1222
Standard Nozzles & Nozzle Insulators- All Guns
21 Series 22 Series HD22 Series
23 Series 23T Series 23H Series
TwecoVendor Code: TWE
216
2
Iner
t Gas
Equ
ipm
ent
Standard Nozzles & Nozzle Insulators - All Guns / Optional Arc Spot
Gun Model Nozzle Style Insulator 3/8" / 9.5 mm Bore 1/2" / 12.7 mm Bore 5/8" / 15.9 mm Bore 3/4" / 19.1 mm Bore24 Series
No. 4 (Standard) Adjustable, recess to projection
034A1340-1100
24A-501240-1110
24A-621240-1120
24A-751240-1130
Optional, short-stop, 1/8" Tip recess
034A1340-1100
24A-37-SS1240-1101
24A-50-SS1240-1111
24A-62-SS1240-1121
24A-75-SS1240-1131
Optional, ss tapered, 1/8" Tip recess
034A1340-1100
24AT-37-SS1240-1301
Optional, heavy duty,adjustable
034A1340-1100
24AH-501240-1210
24AH-621240-1220
24AH-751240-1230
Optional, heavy duty,short stop
034A1340-1100
24AH-50-SS1240-1211
24AH-62-SS1240-1221
24AH-75-SS1240-1231
Optional, coarse thread,1/8" Tip recess
34CT1340-1400
24CT-37-S1240-1404
24CT-50-S 1240-1414
24CT-62-S1240-1424
24CT-75-S1240-1434
Optional, coarse threadTip flush
34CT1340-1400
24CT-50-F1240-1412
24CT-62-F1240-1422
Optional, coarse thread,1/2" Tip recess
34CT1340-1400
24CT-62-R1240-1423
24CT-75-R1240-1433
25 Series
No. 5 (Standard) Coarse thread,1/8" Tip recess
35CT1350-1400
25CT-501250-1410
25CT-621250-1420
25CT-751250-1430
Optional, self-insulated,1/8" Tip recess
25I-621250-1120
25I-751250-1130
26 Series 5/8" / 15.9 mm Bore 3/4" / 19.1 mm Bore 7/8" / 22 mm Bore
No. 6 (Standard) Self-insulated, 1/8" Tip recess
26I-621260-1120
26I-751260-1130
26I-871260-1140
Optional, coarse thread,1/8" Tip recess
36CT 1360-1400
26CT-621260-1420
26CT-751260-1430
Standard Nozzles & Nozzle Insulators - All Guns
Part No. 034A Part No. 24AT-37-SS Part No. 24A-50 Part No. 24CT-62-F Part No. 25I-75
Type Mini & No. 1 No. 2 No. 3 No. 4 No. 5
Flat Arc Spot
21-62-FAS1210-1520(1/2" bore)
22-62-FAS1220-1520(5/8" bore)
23-75-FAS1230-1530(3/4" bore)
24A-62-FAS1240-1520(3/4" bore)
25CT-125-FAS1250-1560(1-1/4" bore)
24A-75-FAS1240-1530(5/8" bore)
25CT-162-FAS1250-1570(1-5/8" bore)
24A-100-FAS1240-1550(3/4" bore)
Optional Arc Spot
Part No. 21-62-FAS
Part No. 25CT-125-FAS
TwecoVendor Code: TWE
217
2
Inert Gas Equipment
Standard Diffusers
Nozzles & Standard Diffusers / Standard Conductor Tubes
Diffusers for No. 5 & 6 MIG Guns must be used with conduits as follows: Note: 1 = 45-3545, 45-116, 45N-3545 (small wire)Note: 2 = 45-564, 45N-116 Note: 3 = 45H-332, 45H-764, 45H-18Note: 4 = All Note 2 & 3 conduits
Mini MIG Gun No. 1 No. 2 No. 3 & 4 No. 5
35-501500-1100(standard)
00511510-1101(standard)
00521520-1101(standard)
054A1540-1103(standard)
55SW1550-1101(note: 1)
(use with 16S tips) 55S-SW1550-1110(note: 1)
(use with 16S tips) 55S-SWL1550-1120(note: 4)
51-231510-1100(use with .023 wire)
52-231520-1100(use with .023 wire)
00551550-1100(note: 2)
(use with 16S tips) 55S-H1550-1111(note: 2,3)
52FN1520-1102(use with No. 3 & 4 nozzles)
055H1550-1102(note: 3)
Part No. 55SWPart No. 0052
Optional Standard Conductor Tubes
Note: Extensions are designed to fit standard conductor tubes. Conduits must be replaced when installing conductor tube extensions.
Degree/ Bend Mini No. 1 No. 2 No. 3 No. 4No. 5 No. 65" Radius 5" Radius
45°35-60-451600-1101
61-451610-1101
62J-451620-1300
63J-451630-1110
64J-451640-1105
65J-451650-1110
66J-451660-1825
60° (standard)35-60-601600-1102
61-601610-1102
62J-601620-1301
63J-601630-1111
64J-601640-1106
65J-601650-1111
66J-601660-1826
80° 35-60-80 1600-1103
63J-80 1630-1112
65J-801650-1112
66J-801660-1827
180°61-1801610-1104
62J-1801620-1113
63J-1801630-1113
63J-180 1650-1113
MINI-MIG GunConductor Tube Extensions
No. 3 & 4 No. 5No. 3 & 4 No. 5
Extension 4" 180°64A-4EX1640-1301
65-4EX1650-1301
Extension 45°64EX-451640-1311
65EX-451650-1311
Flexible conductor tube3560SFLX4-801600-1141
Extension 6" 180°64A-6EX1640-1302
65-6EX1650-1302
Extension 60°64EX-601640-1312
65EX-601650-1312
Extension 8" 180°64A-8EX1640-1303
65-8EX1650-1303
Standard Conductor Tubes
Part No. 61-60 Part No. 62J-60 Part No. 65J-60
TwecoVendor Code: TWE
218
2
Iner
t Gas
Equ
ipm
ent
Wire Size Inches/ Metric
Tip I.D. Inches/ Metric
Mini & No. 1 No. 2, 3, & 4 No. 5 No. 6
Standard OptionalHeavy Duty
OptionalTapered Standard Optional
Heavy DutyOptionalTapered
StandardRecess
Optional 1/8" Recess
Standard3/8" TipH D Tip
Tapered3/8" TipH D Tip
.023" / 0.6 mm .031" / 0.79 mm11-23 1110-1100
11T-231110-1300
14-231140-1100
14T-231140-1300
.030" / 0.8 mm .038" / 0.97 mm11-301110-1101
11H-301110-1201
11T-301110-1301
14-301140-1101
14T-301140-1301
.035" / 0.9 mm .044" / 1.12 mm11-351110-1102
11H-351110-1202
11T-351110-1302
14-351140-1102
14H-351140-1202
14T-351140-1302
15H-351150-1202
16S-35*1160-1102
16ST-35 1160-1135
.040" / 1.0 mm .048" / 1.22 mm11-401110-1103
11H-401110-1203
11T-401110-1303
14-401140-1103
14H-401140-1203
14T-401140-1303
16S-40*1160-1103
16ST-401160-1136
.045" / 1.2 mm .054" / 1.37 mm11-451110-1104
11H-451110-1204
11T-451110-1304
14-451140-1104
14H-451140-1204
14T-451140-1304
15H-451150-1204
15HFC-451150-1254
16S-45*1160-1104
16ST-45160-1137
.052" / 1.3 mm .064" / 1.65 mm14-521140-1105
14H-521140-1205
14T-521140-1305
15H-521150-1205
15HFC-521150-1255
16S-52*1160-1105
16ST-521160-1138
1/16" / 1.6 mm .073" / 1.85 mm14-1161140-1106
14H-1161140-1206
14T-1161140-1306
15H-1161150-1206
15HFC-1161150-1256
16S-116*1160-1106
16ST-1161160-1139
5/64" / 2.0 mm .090" / 2.29 mm14-5641140-1109
14H-5641140-1209
15H-5641150-1209
15HFC-5641150-1259
16S-564*1160-1109
3/32" / 2.4 mm .106" / 2.67 mm15H-3321150-1210
15HFC-3321150-1260
16S-332*1160-1110
7/64" / 2.8 mm .120" / 3.05 mm15H-7641150-1211
15HFC-7641150-1261
16S-764*1160-1111
1/8" / 3.2 mm .144" / 3.66 mm15H-181150-1212
15HFC-181150-1262
16S-18*1160-1112
3/64" AL / 1.2 mm
.059" / 1.50 mm11AH-3641110-1213
14A-3641140-1113
14AH-3641140-1213
15AH-3641150-1213
16AS-364*1160-1113
1/16" AL 1.2 mm .082" / 1.85 mm 14AH-1161140-1214
15AH-1161150-1214
16AS-116*1160-1114
*16STips-whenusedinNo.5Mig-Gunsrequirea55Sstylediffuser.Use55S-SWLor55S-HLfor5/32tiprecess.Use55S-SWor55S-Hfor3/8tiprecess.
Contact Tips - All GunsStandard, Tapered & Heavy Duty Styles
11 Series 14T Series 16S Series
Contact Tips
TwecoVendor Code: TWE
370
6
Wel
ding
Acc
esso
ries
TwecoVendor Code: TWE
Part No. Stock No. Description AMPCapacity
ElectrodeCapacity
Cable ConnectionCapacity
Length(inches)
Length(mm)
04TT 9120-1000 Tweco-Tite®holder 400 1/16"thru1/4" thru3/0 9" 229
Description A-532 A-316 A-732 A-14 A-14-HD A-38-HD
TipInsulationw/screw
A-532-1P(9910-2102)
A-532-1P(9910-2102)
A-732-1P(9910-2302)
A-732-1P(9910-2302)
A-732-1P(9910-2302)
A-38-HD-1P(9910-2602)
BodyinsulationA-532-3(9910-2103)
A-532-3(9910-2103)
A-532-3(9910-2103)
A-14-3(9910-2403)
A-14-3(9910-2403)
A-38-HD-3(9910-2603)
MoldedhandleA-532-7(9910-2107)
A-316-7(9910-2207)
A-732-7(9910-2307)
A-14-7(9910-2407)
A-14-HD-7(9910-2507)
A-38-HD-7(9910-2607)
HandlescrewsAL-300-12(9910-2712)
AL-300-12(9910-2712)
AL-300-12(9910-2712)
AL-300-12(9910-2712)
AL-300-12(9910-2712)
AL-300-12(9910-2712)
Cableconnectorscrew
A-532-24(9910-2124)
A-532-24(9910-2124)
A-532-24(9910-2124)
A-14-24(9910-2424)
A-14-24(9910-2424)
A-14-24(9910-2424)
TwecoTong® Electrode Holders* Featurereversibletopandbottominsulators.
• Efficient6-positionjawpatterns.• Fullyinsulated.• Protectedsprings.• Ball-pointcableconnection.
TwecoTong® Electrode Holder Parts
TwecoTong® Electrode Holders / Parts / Ground Devices
Heavy Duty Rotary Ground DevicesTweco®Roto-Groundisahighlyefficientdeviceforgroundingweldmentswhilebeingrotatedonturningrollsorpositioners.The2"shaftshouldersuptoasteelnutwhichtheuserweldstohisrotatingworkorfixture.Tweco®Roto-Groundshavenobrushes,springsormercury.Asimpletensionadjustingboltprovidesmaximumefficiency.
Part No. Stock No. AMPCapacity
CableCapacity
No. of Heads
ShaftStud
Length(inches)
Length(mm)
GCRG-140 9210-1314 400 1-4/0 1 3/4"NC
RG-140 9250-1114 400 1-4/0 1 3/4"NC 8" 203
RG-230 9250-1123 600 2-3/0 1 1-1/8"NC 10-1/4" 260
RG-240 9250-1124 800 2-4/0 1 1-3/8"NC 10-5/8" 270
RG-440 9250-1144 1500 4-4/0 2 1-3/8"NC 10-5/8" 270
RG-640 9250-1164 2000 6-4/0 3 1-3/8"NC 10-5/8" 270
Part No. A-14-HD
Part No. GCRG-140 RG-240 RG-640RG-140 RG-440
Part No. Stock No. AMPCapacity Body Alloy Electrode
CapacityCable ConnectionCapacity
Length(inches)
Length(mm)
A-532* 9110-1101 200 Copper thru5/32" Ball-pointthru2/0 8-1/2" 216
A-316* 9110-1102 250 Copper thru3/16" Ball-pointthru2/0 9-1/4" 235
A-732* 9110-1103 300 Copper thru7/32" Ball-pointthru2/0 10" 254
A-14 9110-1104 350 Copper thru1/4" Ball-pointthru4/0 11" 279
A-14-HD 9110-1105 400 Copper thru1/4" Doubleball-pointthru4/0 12" 305
A-38-HD 9110-1106 500 Copper thru3/8" Doubleball-pointthru4/0 13-1/4" 336
*Soldinclamshellpackaging.
371
6
Welding Accessories
TwecoVendor Code: TWE
Roto-Work Grounding ClampsTweco®Roto-WorkGroundClampsaredesignedprimarilytoworkinconjunctionwiththeTweco®Roto-GroundDevice.However,theymayalsobeusedforotherhighamperagegroundingapplications.TheRoto-GroundshaftscrewsintothetappedbackoftheRoto-WorkClamp.TheclampisquicklyattachedormovedfromonerotatingweldmentorfixturetotheotherwithoutremovingtheRoto-Groundfromit.Savesweldingdowntime.Roto-WorkClampsaremadefrom98%copperalloy.Theycomein600,1200and2000amperecapacity.No.WCRG-600ampereandWCRG-1200amperehavesingletighteningscrews.No.WCRG-2000hastwotighteningscrews.NumberWCRG-600worksonlywithNo.RG-230duetoitssmallershaftsize.Largetighteningscrewsandamplecontactsurfaceareaprovidecool,efficientoperation.
Ground ClampsGC-300 Ground Clamp• 98%copperalloyjaws• Fullyinsulatedspring
SGC-300 Ground Clamp• Steelbodywithdirectgroundthroughcopperalloyjaw
• SGC-500w/coppershunt• SGC-300w/ocoppershunt
FGC-300 Ground Clamp• 98%copperalloy• 200,300&500AMPflatjaw
C-Type Ground Clamps
Part No. Model No. AMP Capacity Type Cable Connection Throat Opening Throat Depth
GC-600-50 9210-1150 500 1/2"capscrew 2-1/2" 1-3/8"
GC-600-DBP 9210-1201 600 Doubleball-point 2-1/2" 1-3/8"
GC-600-TMP 9210-1202 600 Tweco®maleplug 2-1/2" 1-3/8"
Ground Clamps
Part No. Stock No. AMPCapacity
Fits Roto-Ground
ClampContact
ThroatHeight
ThroatDept
Over-allHeight
Over-allWidth
TappedFor
WCRG-600 9255-1106 600 RG-230 6-1/4sq/in 2-1/2" 2-1/2" 5-3/4" 2-1/2" 1-1/8"NC
WCRG-1200 9255-1112 1200 RG-240/440 9sq/in 3" 3" 6-3/4" 3" 1-3/8"NC
WCRG-2000 9255-1120 2000 RG-440/640 12sq/in 3" 3" 6-3/4" 4" 1-3/8"NC
GC-600-75 9255-1075 Clamponly-tapped3/4"forRG-140Roto-Groundonly
Part No. Stock No. AMPCapacity Jaw Opening Cable Connection
CapacityLength(inches)
Length(mm)
GC-200 9205-1120 200 1"-depth3" Ball-pointthru1/0 6" 157
GC-300* 9205-1130 300 1-1/2"-depth4" Ball-pointthru3/0 8-1/2" 216
GC-500 9205-1150 500 2"-depth5-1/4" Ball-pointthru4/0 10" 254
SGC-300 9205-1230 300 2"-depth1-3/4" 1/2"studconnection 9" 228
SGC-500 9205-1250 500 2"-depth1-3/4" 1/2"studconnection 9" 228
FGC-200 9205-1320 200 5/8"-depth2" Ball-pointthru1/0 5" 127
FGC-300 9205-1330 300 1"-depth3-1/2" Ball-pointthru3/0 7-1/4" 184
FGC-500 9205-1350 500 1-1/2"-depth3-1/4" Ball-pointthru4/0 9-1/4" 234
Part No. GC-600-75
Part No. GC-300 Part No. FGC-300Part No. SGC-300
Part No. GC-600-50 Part No. GC-600-DBP Part No. GC-600-TMP
*Soldinclamshellpackaging.
372
6
Wel
ding
Acc
esso
ries
TwecoVendor Code: TWE
Part No. Stock No. Description Type Cable Connection Cable Capac-ity
Std. Pkg.
MPC Series Positive-CAM Mechanical Connection - Zinc Plated Type Cable & Cover Screws
1-MPC 9425-1100 Completeconnection Singleball-point 4,2,1 1ea.male/female
1-MPC-1 9425-1110 Malehalf Singleball-point 4,2,1 2ea.male
1-MPC-2 9425-1120 Femalehalf Singleball-point 4,2,1 2ea.female
2-MPC* 9425-1200 Completeconnection Singleball-point 1/0,2/0,3/0 1ea.male/female
2-MPC-1* 9425-1210 Malehalf Singleball-point 1/0,2/0,3/0 2ea.male
2-MPC-2* 9425-1220 Femalehalf Singleball-point 1/0,2/0,3/0 2ea.female
4-MPC* 9425-1400 Completeconnection Doubleball-point 3/0or4/0 1ea.male/female
4-MPC-1* 9425-1410 Malehalf Doubleball-point 3/0or4/0 2ea.male
4-MPC-2* 9425-1420 Femalehalf Doubleball-point 3/0or4/0 2ea.female
2-1-MPC 9425-1140 Whipconnection Singleball-point 4,2,1,1/0 2ea.
Cable ConnectorsMPCconnectorsareequipedwithheatandoilresistantcovers,zincplatedcoverandball-pointcablescrews.ConnectorsareinterchangeablewitholderTweco®MBPconnectors.TheWhipcableconnectorisusedwhendownsizingcabletoanelectrodeholder.ItisaNo.2maleconnectorwithcableholesizedtofit4,2,1or1/0cable.The2-1-MPCwillfitanyNo.2orNo.4femaleconnector.
Part No. Stock No. DescriptionMPC Series Positive-CAM - Zinc Plated Type Cable & Cover Screws
1R-C 9940-2103 Insulatingcoveronly,all1-MPC
24R-MBP 9940-2124 Insulatingcoveronly,all2&4MPC
1-MBP-10 9940-2100 Cableconnectionscrew,zincplated,all1-MPC
A-532-24 9910-2124 Cableconnectionscrew,zincplated,all2-MPC
A-14-24 9910-2424 Cableconnectionscrew,zincplated,all4-MPC
Cable Connector Replacement Parts
Part No. Stock No. Fits Tweco® Connection No.
1-SF-50 9505-1151 No.1malehalf
2-SF-50 9505-1152 No.2&No.4malehalf
Female Terminals• StudHoleSize17/32"
Terminals and Twecolugs®
• Screw-onterminals-fits• Terminalsize1/2"NC
Cable Connectors / Terminals / Lugs
Part No. Stock No. Description Accepts Male Ends Std. Pkg.
1-AF 9510-1100 45˚angle 1-MPC 24
1-OF 9510-1101 180˚offset 1-MPC 24
2-AF 9510-1110 45˚angle 4-MPC,2-MPC 24
2-OF 9510-1111 180˚offset 4-MPC,2-MPC 24
Part No. 2-MPC
Part No: 1-AF
Part No: 2-OFPart No: 2-AF
Part No: 1-OF
Part No: 2-SF-50
*Soldinclamshellpackaging.
373
6
Welding Accessories
TwecoVendor Code: TWE
Part No. Stock No. Description Cable CapacitySize of Stud Hole
Length(inches)
Length(mm)
140-HD-180 9515-1120 180˚offset 3/0&4/0 21/32" 4-3/8" 111
140-HD-180C 9515-1121w/insulatedcover180°offset
3/0&4/0 21/32" 5-1/2" 140
240-HD-180 9515-1122 180°offset 3/0&4/0 21/32" 4-5/8" 131
Terminals- Heavy Duty Type• MechanicalBall-point
Twecolugs® - Crimp or Solder Type• ForuseofTweco®“Lug-Set”
Part No. Stock No. WeldingCable Size
AMPRating
Size of Stud Hole
I.D. SolderSocket
Std.Pkg.
T-62 9520-1104 6thru2 150 17/32" .461" 5
T-120 9520-1105 1thru2/0 225 17/32" .559" 5
T-3040 9520-1107 3/0&4/0 250 17/32" .660" 5
T-40HD 9520-1109 4/0heavy-duty 325 21/32" .776" 5Power Cable Lugs
T-810 9520-1101 8thru10 50 13/64" .238" 10
T-68 9520-1102 6thru8 70 21/64" .289" 10
T-46 9520-1103 4thru6 90 21/64" .347" 10
Cable Splicers• Ballpointtype Part No. Stock No. Fitting Type Cable Capacity Std. Pkg.
BP-410 9605-1101 Ballpoint 4,2,1,1/0 1
BP-1030 9605-1103 Ballpoint 1/0,2/0,3/0 1
BP-2040 9605-1105 Doubleballpoint 2/0,3/0,4/0 1
Terminals / Lugs / Splicers
Part No. 140-HD-180 Part No. 240-HD-180
Part No. 140HD-180C
Part No. BP-410 Part No. BP-1030
Part No. BP-2040
Part No. T-62 Part No. T-810
Part No. Stock No. Description Cable Capacity Std. Pkg.
10-45 9915-1100 45˚Angle* thru1/0 1
10-45C 9515-1101 45˚Angle** thru1/0 1
10-180 9515-1102 180˚Offset* thru1/0 1
10-180C 9515-1103 180˚Offset** thru1/0 1
40-45 9515-1110 45˚Angle* thru4/0 1
40-45C 9515-1111 45˚Angle** thru4/0 1
40-180 9515-1112 180˚Offset* thru4/0 1
40-180C 9515-1113 180˚Offset** thru4/0 1
Ball-Point Connection Type• Studholesize17/32"
* Lessinsulatedcover**Insulatedcover
Part No. 10-45C Part No. 40-180
Part No. 10-180C Part No. 40-45
374
6
Wel
ding
Acc
esso
ries
TwecoVendor Code: TWE
Part No. Stock No. Fits Cam LockingMachine Receptacle
Fits Tweco®
Male Plug Ends
2-CLC 9505-1811 Large-11/16"I.D. No.2-M,4-M,2-MPC,4-MPC
Part No. Stock No. FittingType
Fits TwecoConnector
For CableSize
CableAttachment
1516-BPF 9580-1100 Ball-point No.1 4,2,1 5/16"ballpoint
114-TSF 9580-1101 Threaded No.1 4,2,1,1/0 5/16"thread,stud
238-TSF 9580-1102 Threaded No.2,4 1/0,2/0,3/0 3/8"thread,stud
2916-BPF 9580-1103 Ball-point No.2,4 1/0,2/0,3/0 9/16"ballpoint
212-TSF 9580-1104 Threaded No.2,4 1/0,2/0,3/0 1/2"-20thread,stud
Panel Receptacles • UsewithMPCorMBPconnectors
Part No. Stock No. Description
A-532-24 9910-2124 9/16"ballpointscrew,usewith1516-BPF
AL-300-12 9910-2712 7/16"ballpointscrew,usewith2916-BPF
Replacement Parts
Tweco® “Lug-set” Block & Punch • ForusewithTwecolugs® Part No. Stock No. Description
12-BP 9900-1140 Block&punch
Replacement Machine Plugs-Ball Point ConnectionPart No. Stock No. Taper Length Taper Dimension Cable Capacity
1-M-T 9505-1800 1-1/8" 21/64"to23/64" 4,2,1
2-M-T 9505-1801 1-1/8" 21/64"to23/64" 1/0,2/0,3/0
Receptacle Conversion Adapters
Panel Receptacles / Block & Punch
BPF VersionTSF Version
Part No. 1-M-T Part No. 2-M-T
519
9
Hand Tools
Tweco, UllmanVendor Code: TWE, ULM
Jacket Stripping Cable Cutting Hand Tool
Part No. Stock No. Description
T-908 9900-1190 Tweco® cable cutting hand tool
Cable Cutter / Lighted Inspection Mirrors / Inspection Mirrors
3-3/8" LED Light Inspection MirrorThree LED lights illuminates dark areas for perfect inspection. All-angle ball joint holds the lighted mirror head firmly at any angle for perfect viewing. Stainless steel handle telescopes from 6-3/4" to 30-1/4" for fast accurate inspection, and the cushion handle will not slip in wet or oily hands.Part No. HTS-2LT
1-3/8" LED Light Inspection Mirror 1-3/8" LED case illuminates dark areas for viewing in tight areas. Telescopes from 6-3/4" - 35-1/2".Part No. HTE-2LT
Rectangular LED Light Inspection Mirror RectangularInspectionMirror(2-1/4”x3-1/2”)withthreeRotatingLEDLightsTelescopes from 6-3/4” - 30-1/4”. Lighted head with three LED Lights that can be adjusted to needed angle for inspection in tight dark areas. All-angle ball joint holds the lighted mirror head firmly for perfect viewing. Stainless steel handle is long, strong, and lightweight for fast accurate inspection. Cushion handle will not slip in wet or oily hands.Part No. HTK-2LT
Part No. HTC2LT-HDReplacement Mirror Head
Part No. HTS-2LT
Part No. HTC-2LT
Inspection Mirrors For All Angle ViewingOriginal All-Angle Ball Joint Mirrors with brushed finish stainless steel mirror backs.
Fast, accurate visual inspection of hidden areas with an almost limitless number of positions. Double ball joint links swivel mirrors for viewing to 360°. Ullman’s precision engineered links are manufactured from tempered spring steel to withstand the stresses of constant repositioning, move freely, hold desired position.• Replaceableclearglassmirrorsforperfect reflection.• Telescopingandpocketmodels.• Non-rotatinginnerhexrodsontelescopic models prevent mirrors from swinging out of alignment when in use.• Insulatingvinylgriponallmodels.
K-2 Series Rectangular Telescoping Mirror 2-1/8" x 3-1/2"
• Overalllength11-1/4",extendsto15-1/4"Part No. OK-2
• Extra Long Handle• Overalllength17-1/4",extendsto27-1/2"Part No. K-2L • Magnifying• Overalllength11-1/4",extendsto15-1/4"Part No. K-2M • Magnifying, Extra Long handle• Overalllength17-1/4",extendsto27-1/2"Part No. K-2ML
A-2 SeriesCircular Pocket Mirror 7/8" diameter • Overalllength7-1/2"Part No. OA-2
• Magnifying• Overalllength7-1/2"Part No. A-2M
Part No. HTK-2LT
Part No. HTE-2LT
2-3/8" LED Light Inspection MirrorLED Light illuminates dark areas for perfect inspection. Telescopes from 6-1/2” - 36-3/8”. All-angle ball joint holds lighted mirror head firmly at any angle for perfect viewing. Stainless steel handle is long, strong, and lightweight for fast accurate inspection. Comes with two round lithium batteries. Heavy Duty handle will not slip in wet or oily hands. Part No. HTC-2LT