TW AUDiO Presets KDSP Preset guide EN 1 · 10 dB -S dB -10 dB -20 dB — -25 dB -30 dB -40 dB O dB...
26
Transcript of TW AUDiO Presets KDSP Preset guide EN 1 · 10 dB -S dB -10 dB -20 dB — -25 dB -30 dB -40 dB O dB...
-
http://www.twaudio.de/
-
General informationContent1. Presets structure1.1. New features and updates1.2. Presets1.2.1. Device Presets (*.pam)1.2.2. Channel Presets (*.chp)
2. Transfer the presets to KDSP memory2.1. Firmware and software2.2. Network configuration2.3. Import presetlist to KDSP amplifier
3. Working with presets on display menu3.1. Load device preset3.2. Change FULL / CUT / FLAT Mode (appendix)3.2.1. FULL Mode3.2.2. CUT Mode3.2.3. FLAT Mode
3.3. Delays settings
4. Working with presets in the ARMONIA Software4.1. Loading the presets4.1.1. Loading Device Preset (*.pam)4.1.2. Loading Channel Presets (*.chp)
4.2. Change FULL/CUT/FLAT mode (appendix) in output EQ4.2.1. FULL Mode4.2.2. CUT Mode4.2.3. FLAT Mode
4.3. Delays settings
5. System optimization5.1. Loudspeaker system time alignment5.1.1. Simple method measuring the distance between sources5.1.2. Measuring the phase response5.1.3. Time alignment to VERA S33
5.2. End fire and cardioid arrays5.2.1. End fire subwoofer arrays5.2.2. Cardioid subwoofer arrays
5.3. Vertical array correction5.3.1. Vertical array behaviours5.3.2. VERA10 ACTIVE Array size correction5.3.3. VERA10-PASSIVE Array size correction5.3.4. VERA10 120 degrees horn preset adjustment
6. APPENDIX6.1. Glossary6.2. Active vs passive6.3. Full / cut / flat6.4. PWB15 operation modes6.5. APL4-K wiring diagram
