2 LADDERS; MINIMUM HEIGHT 14’ ASSEMBLY REQUIRES 3 PEOPLE

Equinox Manualassembly instructionsTUUCI

DO NOT FULLY TIGHTEN HARDWARE UNTIL THE END OF INSTALLATION

MUST READ INSTRUCTIONS

WT#

1005155 | tuuci | 3

READ BOX LABELS TO UNPACK

TOOLS NEEDED(images are not to scale)

9/16” or 14mm Socket with a 3/4" wrench 7/32” Allen key 5/32” allen key 5/16” allen key

Rubber mallet Phillips screw driver 3/16” allen key locking vice grips pliers

DO NOT FULLY TIGHTEN HARDWARE UNTIL THE END OF INSTALLATION

DO NOT MIX PARTS OR HARDWARE

TYPICAL SHIPMENT STACKING

BACKREST

MATTRESSSEATING FRAMEROOFROOFROOFWALLWALLBEAMS

BEAMSBEAMS

COLUMNS

BEAMSBEAMS

BEAMSCOLUMNSUN-STACK AND UNPACK BOXES THAT SAY COLUMNS AND BEAMS

ASSEMBLY INSTRUCTIONS IN THIS BOX

1005155 | tuuci | 4

1

DO NOT FULLY TIGHTEN HARDWARE UNTIL THE END OF INSTALLATION

STEPS TO ASSEMBLE CABANA

2

3

4

5

INSTALL BASE MOUNT

ASSEMBLE COLUMNS & BEAMSIF APPLICABLE CONNECT ALL ELECTRICAL

IF APPLICABLE

ASSEMBLE SEATING

ASSEMBLE ROOF

ASSEMBLE SIDE WALL

FULLY TIGHTEN ALL SCREWSTIGHTEN AT THE END OF INSTALLATION6