Tutorials Lamdamap Steering Committee 2009resource.npl.co.uk/docs/events/090629_lamdamap.pdf ·...
Transcript of Tutorials Lamdamap Steering Committee 2009resource.npl.co.uk/docs/events/090629_lamdamap.pdf ·...
www.lamdamap.com
Hamilton Building,
Brunel University, West London,
UK
Sponsorship & Exhibition
Lamdamap 9th
International Conference
Monday 29th June –
Thursday 2nd July 2009Laser metrology, machine tool, CMM and robotic
performance
Organised by:
Prof. K. Cheng (Chairman) , AMEE, Brunel University, UK
Prof. A. Forbes (Co-Chairman), NPL, UK
Mr D. Aspinwall, University of Birmingham, UK
Prof. L. Blunt, University of Huddersfield, UK
Mr E. Brown, Cranfield Precision, UK
Dr J. Burrows, Rolls Royce, UK
Dr K. Carlisle, Lawrence Livermore National Laboratory
Prof. G. Chryssolouris, Patras University, Greece
Prof. S. Dimov, MEC, Cardiff University, UK
Dr A. Donmez, NIST, USA
Mr R. Fergusson-Kelly, Renishaw plc., UK
Prof. A. Frank, Graz University of Technology, Austria
Mr M. Gull, AWE Aldermaston, UK
Mr B. Hughes, NPL, UK
Dr W. Knapp, Swiss Federal Institute of Technology, CH
Prof. J-P. Kruth, Katholieke Universiteit Leuven, Belgium
Prof. R. Leach, NPL, UK
Mr P. Lodge, Heidenhain (GB) Ltd, UK
Dr H. Makatsoris, Brunel University, UK
Prof. J. McBride, University of Southampton, UK
Mr P. Morantz, Cranfield University, UK
Dr M. Morgan, Liverpool John Moores University, UK
Dr R. Morgan, Brunel University, UK
Mr A. Myers, University of Huddersfield, UK
Prof. H. Ohmori, RIKEN & Tokyo Institute of Tech, Japan
Mr N. Orchard, Rolls Royce, UK
Dr T. Pearce, University of the West of England, UK
Prof. D. T. Pham, MEC, Cardiff University, UK
Prof. S. Ratchev, Nottingham University, UK
Mr D. J. Rimmer, Newall Measurements Systems Ltd., UK
Dr H. Schwenke, Etalon, Germany
Dr S. Shi, TWI, UK
Prof. P. Shore, Cranfield University, UK
Mr M. Smith, Heidenhain (GB) Ltd, UK
Prof. D. Stephenson, Cranfield University, UK
Prof. G. Y. Tian, Newcastle University, UK
Mr. D. Walker, Zeeko Ltd. UK
Dr F. Wardle, UPM Ltd, UK
Prof. W.S. Zhao, Shanghai Jiao-Tong University, CN
Lamdamap Steering Committee 2009
Sponsors:
Exhibitors:
A commercial exhibition will run alongside theLamdamap conference sessions in the heart of theconference venue. Once again, a reserved session inthe timetable will allow exhibitors to present theircompany to delegates to maximise their Lamdamapexhibiting experience. If you are interested inexhibiting or sponsorship opportunities, please [email protected]
Student ScholarshipsLamdamap would like to thank Heidenhain for theirfinancial assistance in the provision of studentscholarships. 10 successful applicants will be entitledto a reduced delegate registration fee (£198 + VAT).Applications for student scholarships may be madeonline in conjunction with abstract submission.
Hosted by:
Technical Tour - NPL
The conference will include an optional guided visit tothe National Physical Laboratory (NPL), Teddington.NPL is the UK's national metrology institute and hasrecently moved to a state-of-the-art new building onits Teddington site. The tour will include talks on thedimensional metrology facilities at NPL (includingcoordinate metrology, large scale metrology, lasertracer calibration, engineering measurements andsurface texture) and accompanying laboratorydemonstrations.
A selection of 2 hour duration tutorials will be providedby leading experts in the field. For more details pleasesee www.lamdamap.com
Tutorials
Invitation
Monday 29th June 2009Professional Development Tutorials & Welcome Reception
Tuesday 30th June 2009Technical Sessions, Poster Session & Commercial Session
Wednesday 1st July 2009Technical Sessions, Poster Session & Technical Tour - NPL
Thursday 2nd July 2009Technical Sessions
Brunel University, UK and the National PhysicalLaboratory (NPL), UK are very proud to jointly host the9th International Conference and Exhibition on lasermetrology, machine tool, CMM and robotic performance(LAMDAMAP).
Research at Brunel and NPL has a key focus onAdvanced Manufacturing & Metrology using LaserTechniques and therefore has close synergy with thescope and objectives of the successful Lamdamapseries. The conference will present the latesttechnology in machine tool performance andassessment; co-ordinate metrology; novel machinestructures; ultra precision/micro manufacturing andrelated disciplines. We look forward to welcoming youat Brunel and NPL and to sharing information on thelatest research and developments in these and relatedfields.
Prof. Kai CHENG, BEng, MSc, PHD, FIET, MIMechEHead of Advanced Manufacturing & EnterpriseEngineering (AMEE) Department, School of Engineeringand Design, Brunel UniversityConference Chairman
Prof. Alistair B. FORBESMathematics and Scientific Computing Group, Divisionof Enabling Metrology, National Physical Laboratory
Conference Topics
Machine Tool & CMM Performance Evaluation
Methods
Intelligent Manufacturing & Machine Condition
Monitoring
Novel Manufacturing Technologies & Machine Tools
Machine Systems for Micro-Machining
Advanced Manufacturing & Metrology using Laser
Techniques
Precision and Ultra Precision Machining Technologies
Metrology Applications to Improve Manufacturing
Performance and Industrial Inspection
Surface Texture, Dimension and Form Metrology
Techniques
Standards for Geometric Product Specification,
Machine Calibration & Uncertainty
Programme Outline
Venue
There will be two venues hosting Lamdamap 2009.Brunel University, UK will hold the 3 day conference andexhibition and NPL, UK will host the technical tour andconference dinner on Wednesday 1st July.
The Advanced Manufacturing & Enterprise Engineering(AMEE) department at Brunel is one of the firstintegrated innovative engineering groups in the UnitedKingdom. The department carries out world classresearch in advanced manufacturing technology,enterprise engineering and engineering management.
The National Physical Laboratory (NPL) is the UK’sNational Measurement Institute and is a world-leadingcentre of excellence in developing and applying themost accurate measurement standards, science andtechnology available to man. For more than a centuryNPL has developed and maintained the nation’s primary
measurement standards.
Abstract Submission
Delegate Registration
The charges below include a delegate pack (conferenceproceedings, lunches and coffee break refreshments forthe 3 conference days).
Delegate presenting a paper £396.00Delegate not presenting a paper £450.00
(For 3 days excluding 17.5% VAT)
Authors’ contributions to the conference will initially beselected on the basis of abstracts submitted online atwww.lamdamap.com. Final selection will be decidedfollowing peer review of full papers.
Key Dates
Deadline for short abstracts10th December 2008
Notification of abstract acceptance27th January 2009
Deadline for papers13th March 2009
Lamdamap 9th International Conference
Laser Metrology & Machine Tool Performance
Pico second laser system
architecture: Image Cour-
tesy of Oxford Laser Ltd
NPLBrunel University