Tutorial1a Meshing
1
H. Kim 2003 1 ABAQUS/CAE Tutorial: Controlling Mesh Density Hyonny Kim October 2003 • Use Mesh Control options to selectively refine your mesh at regions of high stress gradients. • Options such as: – Seed Part Instance (define overall Mesh by Seed Size) – Seed Edge: by Number – Seed Edge: by Size – Seed Edge: Biased are available. Apply these at edges to control element spacing BEFORE meshing the part • Other tips: – Partition your part so as to control mesh selectively in separate regions. – Apply mesh to partitions you are interested in first, then mesh other partitions.
-
Upload
abraham-imam-muttaqin -
Category
Documents
-
view
216 -
download
3
description
d
Transcript of Tutorial1a Meshing
H. Kim 2003 1
ABAQUS/CAE Tutorial: Controlling Mesh DensityHyonny KimOctober 2003
• Use Mesh Control options to selectively refine your mesh at regions of high stress gradients.
• Options such as:– Seed Part Instance (define
overall Mesh by Seed Size)– Seed Edge: by Number– Seed Edge: by Size– Seed Edge: Biased
are available. Apply these at edges to control element spacing BEFORE meshing the part
• Other tips:– Partition your part so as to
control mesh selectively in separate regions.
– Apply mesh to partitions you are interested in first, then mesh other partitions.
