Turatech Engineering Jan 2018€¦ · Low and High pressure pumping services for: Stimulation Brine...

Jan 2018

Turatech Engineering

Contents of this Presentation

Purpose

Turatech Engineering Service Introduction

Our Services

How Turatech can help?

Slide 03

Slide 04

Slide 05

Slide 15

What the Client stand to gain?● Improved safety;● Maximum production yield and efficiency especially

during low oil price regime;● Meeting gas quality and volumes reliably;● Lower frequency of equipment failure;● Better management & prevention of emergencies.

Purpose

3 All Rights Reserved © 2018

Create awareness of TuratechService capabilities and demonstrate how we can help support Client’s operations safely and cost effectively.

AUDIENCE

Client company’s senior and site management

Turatech Engineering Service Introduction


Multi-Discipline Engineering Design

● Dedicated task team tailored to specific client requirements. Our engineers, coupled with their flexible and proactive approach, ensures the most successful outcome for every project we undertake.

● Presently with offices in Port Harcourt Nigeria, and Abu Dhabi, United Arab Emirates.

Our Services


Our capabilities have been built up through the development of our business and team, and they include the following competencies:

Greenfield Services● Projects● Process● Technical/Functional Safety● Piping● Mechanical● Structural● Electrical● Control and Instrumentation

Brownfield Services● Plant Asset Integrity & Safety upgrades● Facility Development Program● As-Built with state of the art

equipment/software – APIteq 3600 VAM● Facilities maintenance and pipeline repairs

Plant Asset Integrity and Safety Upgrades


Definition of Plant Optimization

● Optimization - a word often used, but rarely understood;

● Often mentioned but rarely achieved; and● If achieved rarely sustained.

One Definition

● Improving safety and the bottom line by timely, effective and sustained use of sufficient, good production information.

● Optimization of existing facilities is the most cost-effective means of improving through-put, conserving capital, and increasing profit.

Major Problems in Oil & Gas Producing Facilities


Operator error leading to mal-operation during normal and/or operators actions during emergency situations leading to further escalation of hazardous situation.

Examples

9 Operating compressors away from surge line leading to potential compressor damage.

9 Running centrifugal pumps below liquid bubble point -cavitation



Changes:

Examples

9 Installation of gauges during plant in-plot piping modification.

● External – Plant modifications, engineering upgrades currently managed by MoC systems.



Changes: ● Internal – Gradual changes in fluid

composition, field characteristics e.g. well depletion from HP to LP, seal integrity, equipment operating envelopes and capacity.

Examples

9 Gradual build up of CO2 seen in some wells in production.

9 Carbonate breaking out after agitation from the pump hence building up on the impellers ultimately blocking the line.



Changes: ● Cumulative effect – cumulative effect

of plant modifications/upgrade overtime that often overlook potential problems as a result of modifications.

Examples

9 Oroni case study

9 Bhopal – release of methyl isocyanide killing over 2000 and injured 10s of thousands people in 1984

Construction, Facilities, & Pipelines Maintenance, And Repairs


Pipeline Maintenance & Repair Services� Pipeline Upgrade and Repairs� Valve maintenance� Emergency Pipeline Repairs� Management of Oil Spill

Industrial Cleaning:� Pre-operational pipeline chemical cleaning (Acid Pickling

& Alkaline Degreasing)� Sewer, Saver Pits, Ponds, & Columns Dislodging� Pipeline Pigging - Flushing, Hydrotesting, Dewatering,

Drying & Nitrogen Packing.� Pipeline Descaling (Risers, Tubings, etc.) @ 15,000psi � Tank Cleaning � Mechanical Cleaning of Platforms, Rigs, FPSO, etc.� High Pressure Steam Cleaning @3,000psi



Integrated Heat Exchanger/Coolers MaintenanceThese services are:� Hydrojetting/Hydro-blasting� Chemical Cleaning� Unplugging of blocked tubes � General Maintenance, Air Fin Coolers, Boilers &

Other Heat Exchangers

Integrated, Operations And Maintenance (IOM)� This involves the operation and maintenance of

client oil and gas production facilities including all planning, documentations and management procedures required.



Relief Valves Calibration & Procurements � Servicing, Calibration and Re-certification of Pressure

Safety Valves (PSV).� Removal and reinstallation of Relief Valves and the

Leak Testing of reinstalled pipe work

Turbine Lube and Seal Oil Flushing� Oil flushing services � Control valves, bearings,

cylinders and instrumentation

Technical Manpower Services� Provision of skilled Nigerian and Expatriate

manpower fit to contribute effectively to operations in the Nigerian oil industry. Company has a large database of national and expatriate candidates and in addition has access to international agencies for specialized manpower needs.



Valve Maintenance� Preventive and Corrective

maintenance on various types of valves

Miscellaneous Pumping Low and High pressure pumping services for: � Stimulation� Brine Filtration� Fluid Recirculation & Evacuation� Ballasting, etc

Nitrogen ServicesA complete system of Nitrogen Tank, Pump, Vaporizers and connecting accessories for the provision of pipeline purging, inserting of enclosed systems prior to commissioning, decommissioning, hot work, etc.

Chemicals� Supply of Production Chemicals

How Turatech Can Help?


Personnel Upgrade

● Formal training & manuals: Robust and targeted training, up-to-date documentation.

● Face-to-face (Individual): Cross training, formal mentoring, on-the-job(site) training (OJT).

● Face-to-face (Group): In-house workshops, Tailgate meetings, expert storytelling/interviews, critical incident reviews (lessons learned).

How Turatech Can Help?


Process troubleshooting and provision of engineering solutions to ease the identified problems.

Fitness for service (FFS) analysis.

Risk based inspections (RBI).

Reduces MTTR via our prove-in-use maintenance and repair cultures.

Turatech Engineering has the experience to quickly assess your facility, identify bottlenecks or deficiencies and provide engineered and operating safe solutions that address your needs and maximize your facility throughput.

We also proffers safe and cheaper maintenance and repair cultures for oil and gas facilities and pipelines, hence reducing your MTTR.

Clients


We believe in excellent service delivery.

Our clients include but not limited to the following:

Our Partners


Thank You

Turatech Engineering Jan 2018€¦ · Low and High pressure pumping services for: Stimulation Brine...

Documents

Transcript of Turatech Engineering Jan 2018€¦ · Low and High pressure pumping services for: Stimulation Brine...