When designing the world’s finest safety light, therecan be no compromise to quality. Performance isparamount. Reliability is king. Small, powerful,incredibly bright. These were the criteria for theTungsten by ASP.

The reduced form factor of the Tungsten LED ismade possible by a revolutionary new light engine.ASP research developed a unique technology whichproduces brilliant white pre-focused light. A constantcurrent driver is combined with a mathematicallyprecise collimating cone to achieve unparalleledoutput. Advanced optics are coupled with precisionmachined high strength aerospace aluminum. Allsurfaces are then anodized with a proprietary matteblack hardcoat finish.

Powered by high density, leak proof CR123A PTCLithium power cells, the Tungsten provides a tenyear shelf life. The domed lens and tri-mode SwitchAssembly are both o-ring sealed.

The Tungsten is blindingly bright, yet totally secure.A center locking position guards against accidentalactivation. Turned to the right, the switch providesconstant illumination. To the left it is intermittent.

A clip groove is machined into the lens and switchend of each light. A heat treated pocket clip snapsinto either groove.

The Tungsten LED. Innovative design. Unparalleledperformance. Exclusive optics. Tri-mode switching.A light without equal. Typically ASP.

TUNGSTEN®

· Hardcoat Anodized

· Easily Attached Pocket Clip

· Intermittent, Locked, Constant-On Switch

· Blue Accessory Case

Tungsten 12

· 170 Lumens (ANSI Standard)· 1 Hour Run Time

· 3.9" Long

· One CR123A

Tungsten 22

· 200 Lumens (ANSI Standard)

· 2 Hour Run Time

· 5.3" Long

· Two CR123A

BackgroundDesigned to professional law enforcement standardsAerospace aluminum constructionPrecision machinedNo sharp edgesO-ring sealed for maximum water resistanceDistinct profile

Specifications (Tungsten 1)Length 3.9" 99.1 mmDiameter .83" 21.2 mmWeight 2.2 ounces 62.4 grams

(with battery)System 3 voltFlashlight Output 60 lumensRun Time 1.5 hours

Specifications (Tungsten 2)Length 5.3" 134.6 mmDiameter .83" 21.2 mmWeight 3.2 ounces 90.7 grams

(with batteries)System 6 voltFlashlight Output 80 lumensRun Time 3 hours

Body6061 T6 high strength aluminumMatte black hardcoat Coated threads for durabilityExterior and interior scratch and corrosion protectionFront clip grooveRear clip groove

Clip SetDetachable pocket clipDetachable lanyard loopAdjustable wrist lanyard

Power Cells3 volt Lithium (CR123A)PTC protectedSafety ventTen year shelf lifeLeak proofVibration resistant

Locking SwitchBack mountedQuick and positive switch location under stressO-ring sealed activation buttonPC board positive circuit contactSensitive and quiet switch activationComputer micro switch controlledSelf-cleaning (no carbon buildup)Fail safe (backup) switch circuitsReplaceable modular switch assemblies Rotate one full turn to prevent accidental activationLocked (center) Constant on/off switch activation (right)Intermittent switch activation (left)O-ring sealed switch cover

Reflector AssemblyExtremely durableNon-dulling metalized surfaceComputer calculated parabolaLong distance penetrating beamRoom illuminating haloWater clear Lexan lensGasket sealed

LED AssemblyProprietary heat managementCustom driverSmart chip technologyGasket sealed

Belt CasesDutyExecutive

WarrantyLimited

Accessory CaseBlueBallistic Weave

ASP Tungsten. . . Simply Brilliant

O-Ring Seal

ComputerMicro Switch

High Output Cree LED

Parabolic ReflectingChamber

Lexan®

Lens

LensGasket

BatteryTube

Fine LineKnurling

Battery CircuitBoard

FrontClipGroove

Driver CircuitBoard

Switch CircuitBoard

RearClipGroove

LED CircuitBoard

OvermoldedActivationButton

Duty and Executive casesprotect and securely retainthe Tungsten®.

Lithium Power Cells areavailable in packs of 2 or 12.

Constant-On

Locking Switch

ASP, INC . Box 1794 . Appleton, WI 54912 . (920) 735-6242 . asp-usa.com © 2006 ASPTungsten

Three PositionRotary Sleeve

®

“Protecting Those Who Protect”

LockedIntermittent

Duty Executive