TTI / Lighting Product Guide
-
Upload
tti-europe -
Category
Documents
-
view
236 -
download
3
description
Transcript of TTI / Lighting Product Guide
1www.ttieurope.com
www.ttieurope.com
LightingProduct Guide
TTI, Inc. – Never Short on Solutions
2 www.ttieurope.com
Components for Industrial Lighting
TTI, Inc. – Never Short on Solutions
www.ttieurope.com
ApplicationsPower SuppliesElectronic BallastsMotion SensorsCable AssembliesLED Components
Product TypesCircuit ProtectionElectro-MagneticRelays & SwitchesDiscretesInterconnectPassives
• Street Lamps• Security and Surveillance• Energy Saving Controllers• Architectural Illumination• Displays and Signs
3www.ttieurope.com 3www.ttieurope.com
While every effort has been made to ensure that the information contained within is accurate and up to date, TTI, Inc. makes no warranty, representation or undertaking whether expressed or implied, nor does it assume any legal liability, whether direct or indirect, or responsibility for the accuracy, completeness, omissions, or usefulness of any information.Copyright © 2012 TTI, Inc.
AbouT TTI Page 4
LINECARD Page 6
AVX Page 8
bouRNS Page 10
CooPER buSSmAN Page 11
FCI Page 12
KEmET Page 14
KINgbRIghT Page 15
LITTELFuSE Page 16
LELoN Page 18
moLEX Page 19
muRATA Page 22
ohmITE Page 25
omRoN Page 28
PANASoNIC Page 29
PhoENIX CoNTACT Page 32
SouRIAu Page 34
TT ELECTRoNICS Page 35
TDK EPC Page 36
TE CoNNECTIVITy Page 38
VIShAy Page 42
yAgEo Page 46
CoNTENTS
www.ttieurope.com
• Street Lamps• Security and Surveillance• Energy Saving Controllers• Architectural Illumination• Displays and Signs
4 www.ttieurope.com
AbouT TTI
TTI, Inc. – Never Short on Solutions Specialist distributor of Passive, Interconnect, Discrete, Relay & Switch components for Lighting applications
TTI’s European headquarters in Maisach-Gernlinden occupies 13,000m2, with 10,000m2 of dedicated warehouse space on three levels. We provide local service in 39 sales locations across Europe.
Our suppliers are the most innovative and capable in the electronics industry. Together with them, we put emphasis on product knowledge, inventory and logistics to provide our customers with industry leading service support and value.
Our focused product line and comprehensive supply chain management solutions have made TTI the supplier of choice for our OEM and CEM customers world wide.
By focusing on new product introductions, high technology products and working with Mouser, we provide our customer and supplier with unparalleled design-in support, ensuring the best and newest parts are always available.
With the development of energy saving lighting, longer lifetime requirements and a proliferation of electronic displays, there is a greater need for reliable I,P and E and Discrete components to address these new installations.
Why buy from TTI?TTI concentrates on the basic strategy of focusing on our products and striving to be the best at what we do. No other company offers the unique combination of benefits we provide:
• Specialist I, P&E
• Deepest & Broadest Inventory
• Best in Class Support
• Leading Global Suppliers
• Focused Line Card
• Technology Leader
• Only Distributor with Catalogue Division – Mouser
• Opportunity to Consolidate Supplier Base
• Reduced Lead-Times
• Specialist Local Support
• World Class Supply Chain Programs
• Reduced Total Cost of Acquisition
To support your design you can request free of charge samples from TTI.
4 www.ttieurope.com
5www.ttieurope.com
EuRoPE’S LARgEST INVENToRy of Passive, Interconnect, Discrete, Relay & Switch Components
6 www.ttieurope.com
DiscretesPassives
ThE PASSIVE & DISCRETE NAmES you TRuST The inventory and service you need
API
DEL
EvA
N
AvX
BOu
RN
S
CO
OPE
R B
uS
SM
AN
N
EPC
OS
KEM
ET
KOA
LELO
N
LITT
ELFu
SE
Mu
RAT
A
NIC
hIC
ON
Oh
MIT
E
PAN
ASO
NIC
SPE
CTR
uM
C
ON
TRO
LSy
FER
CM
P
TDK
TT E
LEC
TRO
NIC
S
TE C
ON
NEC
TIv
ITy
vIS
hAy
vISh
Ay P
REC
ISIO
N
GR
Ou
PW
IMA
yAG
EO
Resistors
Film
Foil
Network
Power/Wirewound
Carbon
Current Sense
Potentiometers & Trimmers
Precision/Panel Control
Sensor/Encoder
Trimmers
Capacitors
Tantalum
Ceramic
Aluminium
Film
Polymer
magnetics
Ferrite Beads
Ferrite Cores
Chokes
Coils
Inductors
Transformers
Filters
EMI/RFI
RF/Microwave
Circuit Protection
ESD Suppression
Fuses
Gas Discharge Tube (GDT)
Resettable Fuses (PPTC)
Thermistors (NTC)
Thermistors (PTC)
Thyristors
varistors
Timing Devices
Resonators
Crystals
Oscillators
BOu
RN
SC
OO
PER
Bu
SS
MA
NN
KIN
GB
RIG
hT
LITT
ELFu
SE
PAN
ASO
NIC
TOS
hIB
A
TT E
LEC
TRO
NIC
S
vIS
hAy
Diodes
Arrays
ESD Protection
Schottky
Switching
TvS Diodes
Zener
Rectifiers
Avalanche
Bridge
Fast Recovery
General Purpose
Schottky
Standard Recovery
ultrafast Recovery
Transistors
FETs
IGBTs
MOSFETs
RF
Bipolar/Small Signal
Thyristors
DIAC
SCRs
SIDACs
TRIAC
optoelectronics
Couplers
LEDs/LED Modules
Displays
Infrared Emitters
Infrared Receivers
IRDA Transceivers
Optical Sensors
Photo Detectors
Solid State Relays
others
Modules
voltage Regulators
Analog Switches
Motor Control ICs
Fiber-Optic Devices
General Purpose Logic ICs
LED Drivers
7www.ttieurope.com
Connectors Relays & Switches
BOu
RN
S
C&
K
hO
NE
yW
ELL
S&C
MED
ER E
LEC
TRO
NIC
OM
RO
N
PAN
ASO
NIC
TT E
LEC
TRO
NIC
S
TE C
ON
NEC
TIv
ITy
Relays
Signal
Power
General Purpose
Military/Aerospace
Solid State
high Frequency
Automotive
Reed
high voltage
Sockets & Accessories
Sensors
PhotoMOS
Switches
DIP/SIP
Slide
Pushbutton
Rocker/Paddle
Toggle
Thumb/Push Wheel
Tactile
Snap Action/Detect
Special Purpose
Switchlock
Key-Switch
Navigation
Wireless
ThE CoNNECToR, RELAy & SWITCh NAmES you TRuST The inventory and service you need
7*External with supplier joint venture.
Sensors
hO
NE
yW
ELL
S&C
MED
ER E
LEC
TRO
NIC
OM
RO
N
PAN
ASO
NIC
TE C
ON
NEC
TIv
ITy
Sensors
Speed/Position
Thermal
Pressure
Military/Aerospace
Automotive
Airflow
Current
Optical
3M AM
PhEN
OL
AvX
/ELC
O
BOu
RN
S
C&
K
DEL
PhI
FCI
GLE
NA
IR
hA
RW
IN
MO
LEX
OM
RO
N
PAN
ASO
NIC
PAN
Du
IT
PhO
ENIX
CO
NTA
CT
RA
DIA
LL
SOu
RIA
u
SPE
CTR
uM
C
ON
TRO
L
TE C
ON
NEC
TIv
ITy
board-to-board1.25mm to 10.00mm pitch
Pin headers & Sockets
high Speed Backplane
Mezzanine
Device-to-boardIC & PLCC Sockets
Memory Card Connectors
LED Sockets
Smartcard Connectors
Wire-to-board/Wire-to-Wire1.25mm to 10.00mm pitch
Discrete Wire
FFC/FPC
IDC/Mass Termination
Power
SCSI I, II, III
SATA/SAS/Mini SATA
Input/outputAudio
Circular
D-Subminiature
DvI/hDMI
Micro D
Modular Plugs & Jacks
Power
SFP/XFP
RJ/Industrial Ethernet
uSB/Mini uSB/uSB OTG
RF/Coaxial/microwave1.0/2.3, 1.6/5.6 & 7/16
BNC (50/75Ω/TNC)
MCX/MMCX
QMA
SMA, SMB, SMC, SSMA
Type F
Automotive/Transportation Automotive
Agriculture
Commercial vehicles
Construction
Marine
Mass Transit
Recreational vehicles
Speciality ConnectorsBattery
COTS
Filtered
hermetic
high voltage
Industrial
Micro Miniature/Nano
Military/Aerospace
Space
Solderless TerminalsInsulated
Non-Insulated
Terminal blocksPCB Mounted
DIN Rail Mounted
Toolinghand Crimp Tools *
IDC Presses *
Semi-automatic Crimp Tools *
Wire & CableCable Assemblies/value Add
Discrete Wire
FFC Jumpers
Flat Ribbon
Wire management & AccessoriesCable Management
Backshells
heat Shrink Products
Labels & Labelling Systems
Printers & Supplies
8 www.ttieurope.com
Discrete Wire-to-board IDC ConnectorsThe 917X Series of surface mount Insulation Displacement Connectors (IDC) were developed to connect individual wires directly to a PCB ranging from 14AWG to 28AWG for automotive and industrial applications. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without the need for soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replaced up to three times.
Features & Benefits• IDC contact provides a gas-tight connection to the PCB for long term
reliability• Current ratings range from 1A up to 15A• Optional through and end caps lock in place to provide maximum
strain relief• Reduced total applied cost versus solder or crimp processes• Tested to automotive levels on shock, vibration and temperature cycling
for reliability• heat endurance testing of 1000 hours at 125°C• High temperature insulator capable to 260ºC reflow soldering processes
Applications• Bringing power and signals onto a PCB• Daisy chaining PCBs together to create a continuous string of boards• Connecting discrete wire components directly to the PCB
Discrete Wire-to-board IDC Contacts & CoversThe single 9176-500/400 Series contact and capacitor accepts 18AWG to 24AWG wires and support a 6A up to 10A current rating. These dual beam contacts are packaged in T&R and provide a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications.
Features & Benefits• IDC contact provides a gas-tight connection to the PCB
for long term reliability• Tested to automotive levels on shock, vibration and temperature
cycling for reliability• Reduced total applied cost versus solder or crimp processes• heat endurance testing of 1000 hours at 125°C• Operating Temperature: -40ºC to +125ºC
Applications• Connecting discrete wire components directly to the PCB• Bringing power and signals onto a PCB• Daisy chaining PCBs together to create a continuous string of boards
AVX
9www.ttieurope.com
AVX
Discrete Wire-to-board Poke home ConnectorsThe 9276 Series has been developed for a fast and reliable wire-to-board termination in a sleek 2.50mm pitch SMT package for a general application in industrial and commercial markets. With almost every product on the market today having to deal with a small number of discrete wires to connect components to a board, the 9276 Series connectors meets this challenge by simply stripping the wire and inserting them into the connector. This makes the connector very termination friendly within the factory as well as in the field by electrical installers. The dual contact design carries a maximum current rating of 6A with a minimal PCB footprint.AVX provides a small insertion/extraction tool which will allow the wires to easily be replaced up to five times.
Features & Benefits• Accepts 18-24AWG Solid and Stranded wires• Expanded size offering to maximise application potential;
1, 2, 3, 4, 6 & 8 positions• Simple strip, insert and removal design• high spring force top contact provides a lance type retention to capture
and retain the wire• Available in standard white and optional black color• Operating Temperature: -40ºC to +125ºC• heat endurance testing of 1000 hours at 125°C• voltage Rating: 250vAC
Applications• Bringing power and signals onto a PCB• Daisy chaining PCBs together to create a continuous string of boards• Connecting discrete wire components directly to the PCB
SmT board-to-board ConnectorsThe 9159 Series of board-to-board interconnect has been designed specifically for the unique Solid State Lighting (SSL) market requiring coplanar (horizontal-to-horizontal) PCB mating with a 3A current rating in the smallest package available. This solution permits two PCBs to be mated end-to-end creating strips of LED lighting. These single sided SMT connectors are perfect for both FR4 and metal boards where you need to butt the boards up together to minimise LED separation. Availability of both white and black insulation colors make them perfect for lighting as well as industrial applications. With sizes from 2p-6p, these high reliability connectors boast gold plated beryllium copper receptacle contacts for harsh environments.
Features & Benefits• Single sided SMT; supports FR4 and metal PCBs• 5.50mm mated width; minimises PCB space to decrease LED pitch• Gold plated BeCu spring contacts; reliability for harsh environments• Operating Temperature: -40ºC to +125ºC• heat endurance testing of 1000 hours at 125°C• voltage Rating: 125vAC
Applications• Coplanar PCB mating in SSL products• LED linear lighting strip
AVX
10 www.ttieurope.com
bouRNS
LSP Series LED Shunt ProtectorBourns® LSP Series protectors are electronic shunts that provide a current bypass when an LED element in an LED series string fails open circuit. This ensures the remaining string of LEDs will continue to function. There are many cases where high reliability of the LED lighting must be maintained, such as LCD backlighting, transport lighting, avionics, intrinsically safe and low maintenance lighting.
Features & Benefits• Fast switching• Automatic reset• SMB package DO-214AA• Suitable for industrial lighting environments
Applications• LED streetlights• LCD backlighting• Display lighting• Intrinsically safe lighting
LED Lighting SolutionsThe SMAJxxCA Series can provide voltage signal clamping and protection against ESD, EFT and Surge transients applied within the circuitry.
The SRu1048 Series offers high-current handling and low DC resistance in a compact form factor.
The CRA2512 Series are current sense resistors in standard 2512 chip sizes with a high-power density (3W) and low TCR (75PPM). The surface temperature of the resistor is lower than similar parts of the same size from other manufacturers, reaching typically 48˚C under a load of 1W.
The PWR263S-20 Series are SMD resistors in D2PAK casings with very low-inductance and high-power ratings. They can be used with linear current regulators to limit the current especially in high luminosity LEDs which consume a lot of current. These resistors also do not exhibit high surface temperatures which is a requirement in many designs.
The Bourns® MF-MSMF075 Multifuse® polymer PTC provides overcurrent and overtemperature protection.
Electrical Characteristics (@ TA = 25°C unless otherwise Noted)Parameter Test Conditions min. Nom. max. unitIDRM Repetitive peak off-state current vD = vDRM 10 μAv(BO) Breakover voltage dv/dt = 750v/ms,
RSOuRCE = 300LSP0600LSP0900LSP1300LSP1800
691318
16182633
v
Ih holding current IT = 1A, di/dt = 30mA/ms 5 30 mAIBO Breakover current di/dt = 0.8A/ms 75 mAvT On-state voltage IT = 1A 1.2 v
11www.ttieurope.com
CooPER buSSmANN
Inductor Selection for LED Driver DesignsThe LED needs to be properly driven to ensure optimal performance and long life. Designing and implementing an effective driver with suitable topology is the key to successful LED lighting circuits.The topologies used in present day LED drivers are:• Buck • SEPIC • Boost • Flyback • Forward • Buck-BoostEach topology is selected according to the required power level and cost. Semiconductor companies have developed Integrated Circuits (ICs) to drive LEDs.
buck Circuit
A buck circuit regulates input DC voltage down to a desired DC voltage. Buck circuits generally require one inductor.
Forward Circuits
The Forward transformer only provides isolation and voltage scaling. The Forward allows multiple output voltages as well as can provide plus and minus outputs by using tapped windings. A separate energy storage device (inductor) is needed.Forward circuits require a custom-designed forward transformer and an output inductor. Coiltronics designs and makes custom and semi-custom transformers to match forward circuit design requirements as well as has a number of output inductor offerings.
buck boost
The Buck-Boost circuit generates an output voltage that is either higher or lower than the input voltage. The polarity of the output is opposite to that of the input. Buck-Boost circuits generally require one inductor.
boost Circuits
Boost circuits are power converters with an output DC voltage greater than its input DC voltage. Boost circuits generally require one inductor.
Flyback Circuits
The Flyback transformer combines isolation, energy storage, and voltage scaling. The Flyback allows multiple output voltages as well as can provide plus and minus outputs by using tapped windings. Flyback circuits require a custom-designed flyback transformer. Coiltronics designs and makes custom and semi-custom transformers to match flyback circuit design requirements.
Single Ended Primary Inductance Converter (SEPIC) Circuit
The SEPIC circuit is a popular Buck-Boost topology that allows the output voltage to be higher or lower than the input voltage. The SEPIC output polarity is the same as the input. SEPIC circuits generally require two identical inductors that can be individual inductors or a dual-winding inductor.
Part number seriesMPI4040 Series MPA7030
DR Series DR1030, DR1040, DR1050, DR73, DR74, DR124, DR125, DR127
LDS Series LDS0705
SD Series SD3110, SD3112, SD3114, SD3118, SD3812, SD3814, SDh3812, SD10, SD12, SD14, SD18, SD20, SD25, SD52, SD53, SD6020, SD6030, SD7030, SD8328, SD8350
SDh Series SDh2812, SDh3812
uni-Pac Series uP2.8B, uP0.4C, uP2C, uP1B, uP2B, uP3B, uP4B
LD Series LD1, LD2
Typical Circuits for LED Driver Applications
Co
oPE
R b
uSS
mA
N
12 www.ttieurope.com
FCI
boARD-To-boARD
2.54mm BergStik™ unshrouded headers Base PN
Straight Single Row 77311 95293*
Double Row 77313 95278*
Right-Angle Single Row 77315
Double Row 77317
Stacking Single Row 54121
Double Row 54122 54242*
2.54mm Dubox™ PCB Receptacles Base PN
Straight Single Row 76341 91601*
Double Row 76342 89898*
Right-Angle Single Row 89882 71607*
Double Row 89883 71609*
2.00mm Minitek™ unshrouded headers Base PN
vertical Double Row 57102 57202*
Right-Angle Double Row 98423
Stacking Double Row 591X2 59202*
2.00mm Minitek™ Shrouded headers Base PN
Straight Double Row 98414 98424*
Right-Angle Single Row 91269 95000*
Double Row 98464
2.00mm Minitek™ PCB Receptacles Base PN
Straight Double Row 63453 55510*
55508*
91596*
1.27mm Minitek™ Shrouded headers Base PN
Straight Double Row 20021211 20021221*
Right-Angle Double Row 20021212
1.27mm Minitek™ PCB Receptacles Base PN
vertical Double Row 20021311 20021321*
20021323*
* Surface Mount
Connectors for Lighting Applications
13www.ttieurope.com
FCI
CAbLE-To-boARD
2.54mm Quickie® IDC System Base PN
Shrouded headers Straight 75867
Right-Angle 75869
Eject Latch headers Straight 71918
Right-Angle 71922
IDC Receptacles 71600 69830
2.00mm Minitek™ IDC System Base PN
Shrouded headers Straight 98414 98424*
Right-Angle 98464
Eject Latch headers Straight 10078991 10078995*
IDC Receptacles 89947
1.27mm Minitek™ IDC System Base PN
Shrouded headers Straight 20021521
Right-Angle 20021512
Eject Latch headers Straight 20021611 20021621*
Right-Angle 20021612
IDC Receptacles 20021444
* Surface Mount
TERmINAL bLoCKS
Pluggable Terminal Block – Signal Base PN
3.50mm & 3.81mm Plug 20020008 20020004
Straight Socket 20020107
Right Angle Socket 20020110
5.00mm & 5.08mm Plug 20020008 20020006
Straight Socket 20020107
Right Angle Socket 20020110
Pluggable Terminal Block – Power Base PN
7.62mm Plug 20020516
Straight Socket 20020620
Right Angle Socket 20020618
Fixed Terminal Block – Signal Base PN
3.50mm & 3.81mm Fixed horizontal 20020327
5.00mm & 5.08mm Fixed horizontal 20020316
Fixed Terminal Block – Power Base PN
7.62mm Fixed horizontal 20020705
* = Surface Mount Product
WIRE-To-boARD
2.54mm Dubox™ CTW System Base PN
Straight headers Single Row 76384
Double Row 76382
Right-Angle headers Single Row 76385
Double Row 76383
housings Single Row 65239
Double Row 65240
Terminals 76347
2.00mm Minitek™ CTW System Base PN
Straight headers Double Row 98414 98424*
Right-Angle headers Single Row 91269 95000*
Double Row 98464
housings Single Row 69305 90312
Double Row 69307 90311
Active Latch housings 10073599
Terminals 77138
1.25mm CTW System Base PN
Straight headers Single Row 10114829 10114828*
Right-Angle headers Single Row 10114831 10114830*
housings Single Row 10114826
Terminals 10114827
* Surface Mount
FCI
14 www.ttieurope.com
KEmET Solutions for LED Street LightingFeatures & Benefits• Replacement opportunity for mercury and sodium vapor lamps in support of European union Regulation EC 245/2009• Wide array of solutions to accommodate design parameters such as output power and string voltage• All products designed to fulfill application lifetime requirement of > 20 years• Decades of experience in lighting, industrial and automotive applications• uL, CECC and ENEC approvals• Standard, optimised and custom designsApplications• AC/DC converters, EMI filters• LED driver circuits• Microcontroller units
KEmET
KEmET Products
Product Family KEmET Series Form
AC/DC Converter, EmI FilterStandard Film X2: R46, PhE840, F861 (NEW) Box Type, Wire Terminals
X & y Capacitors y2: R41, PhE850, F881 (NEW) Box Type, Wire Terminals
LED Driver Circuit
Standard Film R75, F46X (NEW), PhE426, PhE450 Box Type, Wire Terminals
Aluminium Electrolytic PEG 124, PEG 225 Axial
Ta MnO2 T491, T494, T495 SMD
Ta KO T520, T521, T525, T530 SMD
Ceramics Standard X7R, X5R SMD
microcontroller unit Ceramics Standard X7R, X5R SMD
Speciality & Custom Solutions Available upon request. Please contact your local TTI representative.
Focus Product: PEg124Features & Benefits• Outstanding performance• Customised solutions• Standards IEC384-4 Long Life Grade 40/125/56 CECC 30301-053• Temperature range: -40°C to +125°C• Shelf life: 10 years (at 0v and +40°C) • Very low field failure rate• ISO/ TS 16949 and ISO 14001 approval
Axial design allows use of aluminium lid which will not delaminate
Specially designed gasket minimises electrolyte evaporation
Natural Conv
uR CR Dxh Iac125˚C ≥5kHz
tan∆20˚C
0.1khz
ESR (max)125˚C≥5kHz
ESR (max)20˚C
100khz
40v 3000μF 20x37mm 4.9A 7.9% 13.4mOhm 24mOhm
15www.ttieurope.com
KINgbRIghT
Dot matrix modules: TA/TC12-41, TA/TC13-11 and TA/TC16-31Features & Benefits• TA/TC12-41 Series, a 5 x 7 dot matrix with a matrix height of 28.11mm
and height dimensions of 30.0mm and 22.0mm in width• TA/TC13-11 Series, a 6 x 7 dot matrix with a matrix of 30.50mm and
height dimensions of 34.0mm in height and 23.8mm width• TA/TC16-31 Series, a 5 x 7 dot matrix with a matrix height of 34.00mm
and dimensions of 42.0mm in height and 25.0mm width• Black surface to reproduce the best possible contrast• Can be lined up both horizontally and vertically • Available in standard colors • Available in super-bright versions of InGaAlP chips• RohS compliant
KIN
gb
RIg
hT
Features & Benefits• ultra-thin 0603 package (1.6mm
x 0.8mm) with a height of just 0.25mm
• Viewing angle of 120˚• Low power consumption• Wide viewing angle• Available in standard colours • Compatible with automatic
placement equipment• Moisture sensitivity level 3• Package: 2000pcs/reel
• RohS compliant
Applications• Membrane keyboards• Mobile phone keypad indicator
and backlight • Flat backlights for LCDs• Switch and symbol
KPg-1608 Series
Features & Benefits • Small package size 2.0mm x
1.25mm x 1.1mm (W x L x h)• Bi-colour and low power
consumption• Luminous intensity of typically
200mcd at IF 20mA• Wide viewing angle of 150˚• Moisture sensitivity level 3• Package: 2000pcs/reel• RohS compliant
Applications• Ideal for backlight and indicator
KPb-2012 bi-Color SmD-LED in 0805 Package
Features & Benefits• 1.6mm x 0.8mm x 0.95mm with
0.70mm dome lens feature • Viewing angle of 60˚• high typical luminous intensity
output up to 3000mcd at 20mA
• Temperature ratings of -40˚C to +85˚C
• Low power consumption• various colours available • Moisture sensitivity level 3• Package: 2000pcs/reel• RohS compliant
Applications• Interior & exterior automotive
lighting• Backlight & indicator applications
KPTD-1608 Series
Features & Benefits• Sizes in 0.2”, 0.3”, 0.4”, 0.56”
and 0.8”• Lightweight and low profile design• Bright and clear displaying
capability• Automation-friendly tape• Robust design reduce assembly
cost and eliminate product deterioration
• Moisture sensitivity level 2a• RohS compliant
ultra Thin SmD Display Technology
16 www.ttieurope.com
LITTELFuSE
PLED open LED ProtectorsPLED Series open LED protectors provide a switching electronic shunt path when an LED in an LED string fails as an open circuit. This ensures that the remaining string of LEDs will continue to function if a single LED does not. PLED series devices were designed to enable higher reliability in outdoor LED lighting applications such as street lighting, outdoor signage, aircraft runway lighting, roadside warning lights and other applications. Compatible with one, two and three watt LEDs that have a nominal 3v forward characteristic, PLED Series devices are available in two surface mount packages, the DO-214 and the Quad Flat Pak No-lead (QFN). The QFN’s low profile, chip scale package (CSP) is ideal for dense board applications.Features & Benefits• Fast switching• Automatically resets after power cycle• Available in low profile, small footprint QFN and Standard DO214AA
packages• Compatible with industrial lighting environments• Compatible with PWM frequencies up to 30khz• RohS compliant and halogen-free
Electrical Characteristics (All parameters are measured at T=25˚C unless otherwise noted)
Part Number Marking
vBR breakdown vDRM breakdown Ih IS IT@vT vT @ IT = 1 Amp Critical rate of
rise dv/dt
volts volts mAmps mAmps Amps volts volts
Min Max Min Min Max Max Max Max
PLED6Q12 PL66 16 6
5 100 1.0 1.2 250V/μs
PLED6S PL6
PLED9Q12 PL99 18 9
PLED9S PL9
PLED13Q12 PL1313 26 13
PLED13S PL13
PLED18Q12 PL1818 33 18
PLED18S PL18
Key Performance Parameters• Minimum breakdown voltage: higher than max LED(s) voltage• Maximum breakdown voltage: Lower than LED supply compliance voltage• Maximum continuous current: higher than LED continuous current
Environmental Specifications
high Temperature voltage Blocking MIL-STD-750: Method 1040, Condition A80% min vDRM (vAC-peak), 150°C,504 hours
Temperature Cycling MIL-STD-750: Method 1051-65°C to 150°C, 15-minute dwell,100 cycles
Biased Temperature & humidity
EIA/JEDEC: JESD22-A10152VDC, 85˚C, 85%RH, 1008 hours
high Temperature Storage MIL-STD-750: Method 1031150°C, 1008 hours
Low Temperature Storage -65°C, 1008 hours
Thermal Shock MIL-STD-750: Method 10560°C to 100°C, 5-minute dwell,10-second transfer, 10 cycles
Resistance to Solder heat MIL-STD-750: Method 2031260°C, 10 seconds
Typical LED String Configuration
• Solution: PLED devices experience the compliance voltage and turn on to conduct current around the open LED
• Result: Remaining LED’s stay illuminated. Replacing bad LED will restore original function and turn off the PLED
• In many applications, the dimming of a single LED may not be critical or even noticeable
• Note that PLED power dissipation is lower than the LED, lowering total system power
Constant Current Source
PLED
OpenLED
Active PLED
17www.ttieurope.com
Lighting Applications
home LightingIncandescent Light Dimmer• Wide range of dimmer designs from basic rotary dimmer to sophisticated microprocessor control• uses range from residential to high-wattage commercial applications• Dimmers make older incandescent technology “greener”
home Fluorescent Lighting• Older magnetic ballast designs can use switching thyristors in the lamp starter circuit• Q6004LT Quadrac • Newer electronic ballast designs may need robust AC input protection
CFL (Compact Fluorescent Lamps)• CFL failure modes are under review for safety• Overload protection may be mandated, requiring a real fuse
Commercial LightingCommercial Fluorescent Lighting• New designs are almost exclusively electronic ballasts• Commercial lighting uses 277vAC input, requiring a special fuse
hID Lighting• Metal halide Bulbs• K2401G Family Multipulse SIDAC
LED Lighting• Advantages:
– highly directional light– Energy savings – always on– Long bulb life/less maintenance– Direct form-factor replacements– Custom light colors– Low heat output ideal for refrigerated displays
• AC input circuitry similar to CFLs• PLED opportunity for Hi-Rel applications using high current LEDs (>300mA)
Signage• Commercial signs use a variety of lighting technologies• Flashing incandescent bulb signs will use triacs• LED signs may use AC input protection and PLED devices• Matrix LED signs use sophisticated AC input protection
Industrial/municipal Lighting
LITTELFuSE
LITT
ELFu
SE
18 www.ttieurope.com
LELoN
high Voltage Pen TypeRgL
Features & Benefits• 105°C, for general purpose• Ø8 ~Ø18 with large permissible ripple
current• Pen type included• RohS compliance
RPLFeatures & Benefits• 105°C, 5000 hours assured• Ø10 ~ Ø18 with large permissible
ripple current• Pen type included• RohS compliance
RQLFeatures & Benefits• 105°C, 10000 hours assured• Ø10 ~ Ø18 with large permissible
ripple current• Pen type included• RohS compliance
high Reliability high Voltage TypeRXb
Features & Benefits• 105°C, 5000 hours assured• Suitable for switching power supplies,
uPS, ballast• Smaller size with large permissible
ripple current• RohS compliance
RXQFeatures & Benefits• 105°C, 8000 ~ 10000 hours assured• Suitable for switching power supplies,
uPS, ballast• Smaller case size current• RohS compliance
organic Conductive Polymer Aluminium Electrolytic CapacitorVuA
Features & Benefits• 6.3 ~ 18Ø, 125°C, 1000 ~ 2000 hours
assured• Chip type high temperature range,
for +125°C use• For automobile modules and other high
temperature applications• RohS compliance
oVKFeatures & Benefits• 105°C, 5000 hours assured• ultra low ESR, solid capacitors of SMD type• RohS compliance
oCVuFeatures & Benefits• 125°C, 1000 ~ 2000 hours assured• ultra low ESR, solid capacitors of SMD type• RohS compliance
Lead Spacing and Diameter (mm)ØD 10 12.5 16 18P 5.0 7.5Ød 0.6 0.8α 1.5β 0.5
Lead Spacing and Diameter (mm)ØD 10 12.5 16 18P 5.0 7.5Ød 0.6 0.8α 1.5β 0.5
Lead Spacing and Diameter (mm)ØD 10 12.5 16 18P 5.0 7.5Ød 0.6 0.8α 2.5β 0.5
Lead Spacing and Diameter (mm)ØD 10 12.5 16 18P 5.0 7.5Ød 0.6 0.8α 2.5β 0.5
Lead Spacing and Diameter (mm)ØD 8 10 12.5 16 18P 3.5 5.0 7.5Ød 0.6 0.8α 2.0β 0.5
Lead Spacing and Diameter (mm)ØD L A B C W P ± 0.26.3 5.9+0.1/-0.3 6.6 6.6 7.4 0.5 ~ 0.8 2.08 6.7 ± 0.3 8.4 8.4 9.2 0.7 ~ 1.1 3.110 7.7 ± 0.3 10.4 10.4 11.2 0.7 ~ 1.1 4.7
Lead Spacing and Diameter (mm)ØD L A B C W P ± 0.26.3 5.7±0.3 6.6 6.6 7.4 0.5~0.8 2.06.3 7.7±0.3 6.6 6.6 7.4 0.5~0.8 2.08 6.5±0.3 8.4 8.4 9.2 0.5~0.8 2.38 10±0.5 8.4 8.4 9.2 0.7~1.1 3.110 10±0.5 10.4 10.4 11.2 0.7~1.1 4.712.5 13.5±0.5 13.0 13.0 15.0 1.1~1.4 4.412.5 16±0.5 13.0 13.0 15.0 1.1~1.4 4.416 16.5±0.5 17.0 17.0 19.0 1.1~1.4 6.418 16.5±0.5 19.0 19.0 21.0 1.1~1.4 6.4
Lead Spacing and Diameter (mm)ØD L A B C W P ± 0.28 12.0 ± 0.5 8.4 8.4 9.2 0.7 ~ 1.1 3.110 9.9+0.1/-0.3 10.4 10.4 11.2 0.7 ~ 1.1 4.710 12.7 ± 0.5 10.4 10.4 11.2 0.7 ~ 1.1 4.7
19www.ttieurope.com
moLEX
Features & Benefits• IP67-rated connector ensures a water and dust-tight interconnection
for use in outdoor applications• Receptacle and plug housings are shipped with interface and wire seals
pre-installed to lower applied cost by reducing installer assembly time • Positive-locking system ensures the connectors are securely mated and
prevents accidental un-mating• uv-stabilised, molded materials can be used in applications exposed to
direct sunlight• Can be used with 18 and 20 AWG wires and accommodate multiple
applications• Small overall profile for use in tight spaces
Applications• Lighting
– Retail & hospitality lighting – Outdoor lighting – Office & industry lighting
• vending – Drink dispensers – Food service equipment
• Automotive/Motorcycles• Medical• Industrial Equipment
– Outdoor lighting – Conveyer-belt controls
• Outdoor entertainment – hot tubs – Swimming pools
• Recreation vehicles – ATv – Golf carts – Boats – Jet skis and snowmobiles
• Material handling equipment – Forklifts – Agricultural equipment
• Solar and renewable energy
mini-Fit h2o™ Sealed Interconnect System 4.20mm (.165") PitchThe sealed Mini-Fit h2O™ IP67-rated system with pre-installed, integrated interface and wire seals meet the need for weatherproof, compact connections in wire-to-wire applications up to 9.0A per circuit and contribute to lower applied costs compared to connectors with manually installed seals.The Mini-Fit h2O product family consists of plug and receptacle assemblies and male and female crimp terminals. The plug and receptacle assemblies are provided with the interface and wire seals pre-installed, providing time savings to the customer. The terminals have a new ‘wingless’ design that will not damage seals upon installation or removal. Terminals will accept both 18 and 20AWG, uL 1015 wires. The Mini-Fit h2O housings are molded from a uv-stabilised, uL 94v-0 material. The Mini-Fit h2O connector is the latest addition to the Mini-Fit product family.
mizu-P25™ 2.50mm (.098") Pitch miniature Waterproof Connector SystemsMolex’s Mizu-P25™ miniature wire-to-wire connectors provide the smallest size and highest level of dustproof and waterproof protection. The system is IP67 rated, which ensures connector integrity when submerged in up to one meter of water. Ideal for applications such as motorcycles or air conditioners that continue to pack more complicated electronics into smaller spaces. The Mizu-P25™ system provides assurance that dust or water will not interfere with signal integrity. The Mizu-P25™ family includes two sub-families: the 52213/52266 type, which is rated up to 125v; and the 52116/52117 type, rated up to 250v. Both systems offer features such as integral sealing and secure positive locks. In addition, both versions provide some of the smallest mated diameters of any similar system.
Features & Benefits• Stabilising bump at tip keeps terminal in place during mating• Unique spring-beam design provides high pressure and small deflection
for high vibration application• Raised body design provides polarization• Seal stopper provides waterproof protection and low terminal
insertion force• One-body wire seal enables tighter spacing between terminals• Inner positive lock saves space and protects latch area
Applications• Lighting
– Retail & hospitality lighting – Outdoor lighting – Office & industry lighting
• Mirror harness• Lamp harness• Air conditioning system• Powered rear view mirrors• LED street lights• vending machines
Series numbers 50147/50148/52266/52213/50038/50039/52116/52117
Series numbers 46055/46056/46064/46065
mo
LEX
20 www.ttieurope.com
moLEX
Flexi-mate™ 3.70mm (.146") Pitch board-to-board and Wire-to-board Connector System, Two CircuitsDesigned to meet the backlighting needs of LED TVs and room lighting applications, the new Flexi-Mate family of connectors is the first of its kind on the market to provide a full range of both board-to-board and wire-to-board solutions. Flexi-Mate design was chosen above other designs because it met the needs for flexibility and space savings. The Flexi-Mate system includes board-to-board connectors that are used to snap together small panels containing LED lights. The system also includes a wire-to-board option to connect the LED boards to the main power board; a terminating connector is also available that is used as a type of shorting device to complete an open-loop signal. The system provides designers several different interconnect options. The 3.00mm (.118") mated height also meets the needs of Tv and room lighting units that continue to strive for thinner designs.
Features & Benefits• Board-to-board, wire-to-board and terminator options • Positive side latches on crimp housing• Dual-contact wire-to-board and board-to-board terminal design• Mating guide features on PCB connectors• Shrouded contacts• Meets needs of LED Tvs and lighting equipment that use
interconnecting LED panels• Space savings and easy mating/unmating• Ensures reliable electrical contact • helps facilitate mating and provide smooth insertion• Protects contact area
Applications• Lighting
– Retail & hospitality lighting – Outdoor lighting – Office & industry lighting
• LED Tvs• LED 3D Tvs
• Edge-lit LED BLu Tvs• LCD panels• Track lighting for rooms• Any application requiring space
savings in width dimension area
Illumimate™ 2.00mm (.079") Pitch Wire-to-board Connector System, Narrow Width, Four Circuits, SmT, Positive LockDesigned to meet the needs of thin-screen LED Tvs, the new IllumiMate family of wire-to-board connectors offers narrow width, along with cost and performance advantages. LED Tvs are one of the hottest new items in the consumer electronics world. The technology is so new that consumers are still learning what it is. A LED Tv is a LCD Tv. The difference is a LED Tv uses light-emitting diodes for backlighting, whereas original-generation LCD TVs use cold cathode fluorescent backlighting. The advantages of LED include better resolution, a slimmer design and lower power consumption. The LED lights can be located on a bus-bar across the middle of the screen or on the edge of the panel in order to avoid shadowing. IllumiMate also offers the most robust positive locking design. In addition, the connectors are also halogen-free to meet global environmental requirements.
Features & Benefits• ultra-narrow mated width (6.35mm) • Inner dual-positive-lock design• LCP material• Dual contact terminal design• Polarising ribs inside header • Fully shrouded housing• Meets needs of thin-screen LED Tvs and other
compact applications• Space savings and secure mating retention• Withstands high-temperature environments• Added electrical contact assurance• Facilitate mating and provide pin protection• Provides protection to terminal contact area
Applications• Lighting
– Retail & hospitality lighting – Outdoor lighting – Office & industry lighting
• LED Tvs• LED 3D Tvs• Edge-lit LED BLu Tvs• LCD panels• Plasma display panels• Any application requiring space savings
in width dimension area
Series numbers 104046/104047/104466
Series numbers 503471/503469/503474/503473/503485
21www.ttieurope.com
moLEX
LED Array holderMolex’s LED Array Holder, ideal for OEM light-fixture manufacturers, simplifies the LED installation process for the energy-efficient arrays and reduces installation time with compression contacts that eliminate hand soldering. LED technology has been proven to reduce the amount of energy consumed and is becoming a more reliable, efficient and user-friendly way for accommodating general illumination requirements. using unmatched interconnect technology, Molex provides a solderless solution to mounting LED arrays into OEM designs. LED array holders simplify the LED installation process by eliminating the need for hand or SMT soldering and expensive SMT equipment. The holders allow customers to install LED arrays quickly into fixtures, enable field replacements and facilitate upgrades to current applications.
Features & Benefits• Compression contacts to power array provide stable connection in
high-ambient temperature and simplifies the LED installation process by eliminating hand soldering or expensive Surface Mount Technology (SMT) equipment and reduces installation time
• Double-ended wire-trap terminal to attach power source allows for wiring serial or parallel LED sequences, ensuring ease of array assembly
• Screw-mount attachment method for securing array to heat sink provides robust attachment between LED and heat sink
• high-temperature thermoplastic housing supports high heat-generating environments
• Overall array holder form factors are 42.50 by 26.80mm (1.67" by 1.06"), ideal for lamp and small-fixture applications, including MR16 or track lighting
• Protective cover over wire traps and contacts facilitates optional potted applications
Applications• Retail and hospitality
• Office lighting
Series numbers 180250/180260/180190/180160/180220
mo
LEX
22 www.ttieurope.com
muRATA
murata Solutions for LED Lighting(Switching power supply circuit for LED lighting)
No. Function mLCC (Reflow soldering)
Disc lead wire type (Flow soldering)
mLCC + lead wire(Flow soldering)
C1 X cap GA3/Type GB (X2) AC250v (rms) ― RDE/X7R/AC250vC2 y cap GA3/Type GF (y2) AC250v (rms) DE1/Type KX(y1) AC250v(rms) C4C5 Smoothing EMI filter
GRM/X7R/DC630~1000v―
RDE/X7R/DC630v (※1)GR3/X7T/DC250~630v RDE/X7T/DC250~630v
C8 Output smoothing GRM/X7R/DC25~100v ― RDE/X7R/DC25~100v
C8
L1 DC10~100V
L2
C1C2
C2C4 C5
ControllerIC
bulb Type LED (Non-isolated)
No. Function mLCC (Reflow soldering)
Disc lead wire type (Flow soldering)
mLCC + lead wire(Flow soldering)
C1 X cap GA3/Type GB (X2) AC250v (rms) RDE/X7R/ AC250v (rms)C2 y cap GA3/Type GF (y2) AC250v (rms) DE1/Type KX (y1) AC250v (rms)C3 Primary-secondary isolation GA3/Type GF (y2) AC250v (rms) DE1/Type KX (y1) AC250v (rms)C4 C5 Smoothing EMI filter
GRM/X7R/DC630~1000v―
RDE/X7R/DC630v (※1)GR3/X7T/DC250~630v RDE/X7T/DC250~630v
C6 Snubber GRM/X7R/DC250~630v DES•DEH DC500V/DC1kV RDE/X7R/DC250v/630vC7 Snubber GRM/u2J/DC630~1000v DES•DEH DC500V/DC1kV RDE/u2J/DC250v/630vC8 Output smoothing GRM/X7R/DC25~100v ― RDE/X7R/DC25~100v
DC10~100V
C1C2
C2 C4 C5C8
C6
C7
C3
ControllerIC
L1
Capacitorsbulb Type LED (Isolated)
23www.ttieurope.com
muRATA
Thermistorsovercurrent and overheat Protection, overheat Sensing
overheat Sensing • PRF and PTFM Series• Shutting down LED at overheat working with
LED driver
Features & Benefits• SMD type is helpful for miniaturising circuits because of its small size
and light weight• Excellent Thermal response due to small size• Solid-state construction provides excellent resistance to mechanical
vibration and impact resistance• Contactless operation provides noiseless operation
Temperature Sensing NTC Thermistor• NCP and NXFT Series• Offering accurate temperature detection
over Current & overheat Protection• PRG en PTGL Series• Limiting current though LED automatically,
according to ambient temperature rise
No, Function mLCC (Reflow soldering)
Disc lead wire type (Flow soldering)
mLCC + lead wire (Flow soldering)
C1 X cap GA3/Type GB(X2) AC250v(rms) RDE/X7R/AC250v (rms)C2 y cap GA3/Type GF(y2) AC250v(rms) DE1/Type KX (y1) AC250v (rms) C3 Primary-secondary Isolation GA3/Type GF(y2) AC250v(rms) DE1/Type KX (y1) AC250v (rms) C4C5 Smoothing EMI filter
GRM/X7R/DC630~1000v ― RDE/X7R/DC630v (※1)GR3/X7T/DC250~630v RDE/X7T/DC250~630v
C6 Snubber GRM/X7R/DC250~630v DES•DEH DC500V/DC1kV RDE/X7R/DC250v/630vC7 Snubber GRM/u2J/DC630~1000v DES•DEH DC500V/DC1kV RDE/u2J/DC250v/630vC8 Output smoothing GRM/X7R/DC25~100v ― RDE/X7R/DC25~100v
DC10~100V
C1C2
C2C4 C5 C8
C6
C7Controller
IC
L1
AC100~250V
C3
PFC
Fluorescent Style LED Light (Isolated)
No. Function mLCC (Reflow soldering)
Disc type (Flow soldering)
mLCC+ lead wire type (Flow soldering)
C9 Current limit (ballast)GR3/DC450v (AC100v line) ― RDE/X7T/DC450v (AC100v line)GRM/DC1kv (AC200v line) ― RDE/DC1kv (11Q1, AC200v line)
C9AC Driven LED Light
mu
RAT
A
24 www.ttieurope.com
muRATA
Lighting Applicationsmurata offers a full range of products for lighting applications Sensor/Control Circuit• Pyroelectric Infrared Sensors, IRS Series• Trimmer Potentiometers, PvG3 Series• Ceramic Resonators, CSTLS/CSTCE/CSTCR Series • Thermistors, PRF/NCP Series
Driver• Ceramic Resonators, CSTLS/CSTCE/CSTCR Series• Thermistors, PRF/NCP/NXFT Series
LED module• Thermistors, PRF/PTF/NCP Series
Remote Controller• Chip Multilayer Antennas, LDA Series• Chip Dielectric Antennas, ANC Series• Coaxial Connectors Series
Power Supply unit• Monolithic Ceramic Capacitors for Medium voltage, GR/GA Series • high voltage Ceramic Capacitors, DEA/DES Series• Safety Standard Certified Ceramic Capacitors, Type KX/KY• Trimmer Potentiometers, PvG3 Series • Thermistors, PRF/PRG/PTG/NCP/NTP Series
PIR Sensor(Pyroelectric Infrared Sensor) – Energy SavingFeatures & Benefits• The smallest PIR sensors in the world • Surface mount devices available• Small package size available in re-flow soldering process • Aimed at a broad range of energy saving applications in consumer
appliances • Low current consumption• Cost effectiveThe following customised lenses are also available: ML0658, IML-0642, IML-0669
25www.ttieurope.com
ohmITE
medicalSurgeons and dentists require reliable, high-intensity light sources to do their jobs. A company which provides the light sources these professionals need uses fibre optic light sources which include xenon, metal halide, LED and halogen solutions. Keeping the light source cool, for longer life, is a constant problem. Fans are helpful, but must run very quietly, especially in the operating room setting. To solve this problem, they use a combination of fans and heatsinks to make their system run cooler. With the recent introduction of custom-made Ah heatsink extrusions, Ohmite was able to offer a solution. This heatsink has a very high aspect ratio (number of fins per inch of heatsink cross-section) and had five holes drilled to suit customer specifications.
EmS, Fire, Rescue and DefenceEveryone knows that above all, the emergency services are totally dependent on reliability from their personnel right down to the tiniest component used in the manufacture of their vehicles and equipment. We are proud to supply one of the world’s largest specialist distributors with rheostats which are used in lighting controls.
Emergency LightingThe consequences of failure in this type of equipment do not need to be explained. That is why major European manufacturers choose to use Ohmite PC-58 Series wirewound resistors.
Industrial Lighting By its very nature this lighting needs to be both rugged and cost efficient. Manufacturers across the world have specified our 40, 80, Slim-Mox, WH and MCS resistors in order to meet the rigours of this tough environment.
LED heatsinksOhmite S Series LED heatsinks are low cost and easy assembly heatsinks designed for ‘star’ power LED modules supplied by companies such as Cree, Lumileds, Osram and others. This simple heatsink can hold LED modules and can be mounted simply using thread forming screws. The heatsink has two types of surface finish, black anodised or degreased, and can be used in either natural (free) or forced convection applications.
military ApplicationsOhmite rheostats were first developed in 1932. They are arguably the world’s longest surviving electronic component made to its original specification and design and they are still being designed into new projects. Their environmental ruggedness for withstanding high temperatures, shock and vibration without failure make them the preferred voltage control for military applications. We supply a tandem Model E rheostat assembly (made up of 2 rheostats bracketed together) which is situated in the cockpit of attack helicopters. They provide illumination control for the cockpit LEDs and the infrared landing lights.
Light FantasticLighting technology is changing fast. LEDs, organic LEDs, superbright LEDs and whatever the next generation of lighting may bring. Ohmite’s designers are working just as fast to ensure that your lighting ideas can be brought to life with solutions which will match the most demanding applications and specifications. From resistors through to sophisticated heatsinks, Ohmite has the components which will make your lighting project the success you want it to be. here are some other successes we are proud to be associated with.
MacroChip
S Series heatsink
Rheostat
M Series heatsink
MCS Series
PC-58 Series
oh
mIT
E
26 www.ttieurope.com
ohmITE
Surgical LightingWe don’t need to tell you how important this application is – lives depend on it. Our custom-designed heatsinks ensure that these headlights provide the bright illumination and superior performance perfect for the operating room when the surgeons require premium performance.
FAA ground Support LightingWith the built-in reliability of our 200 Series, 270 lugs, 90 Series axials, 89 Series, and Slim-mox resistors, this product does an important job, often in the most difficult circumstances.
LED bulkhead LightingOur 40 Series and 10 Series are the resistors selected for use in LED dome lights for mobile applications where operation in rugged conditions is often necessary.
Lighting Control PanelsCommercial lighting control panels provide rich and cost-effective lighting control for maximum energy savings. Ohmite’s Engineers assisted in the selection of our LvK and TDh Series resistors for these applications.
Power Saving Emergency LightingEmergency beacon lights have very low power consumption which can reduce power needs by up to 96%. To aid this function Ohmite’s 20 and 89 Series resistors are used.
Electronic ballastsProgrammable energy saving digital ballasts are the perfect choice for energy efficient high-intensity discharge lighting, whether metal halide or high-pressure sodium types. Compared to magnetic ballasts these environmentally friendly, digital programmable ballasts provide dramatically reduced energy consumption of up to 60%. To achieve this Ohmite’s Metalohm and 40 Series resistors are used.
LED Vehicle Light barsConstantly flashing high brightness LEDs require some serious power control. Manufacturers choose Ohmite RW and LvK resistors to ensure that, in an emergency, lighting would be one less thing to worry about.
Xenon Strobe LightingThese lamps and controllers feature the high-intensity, precisely focused beam angle and flexible modular design needed for numerous direct illumination applications including license plate illumination on moving vehicles, night time surveillance and industrial machine vision applications. Ohmite’s TAP600 resistors are selected for this particular use.
Metalohm
Slim-Mox
TAP600
10 Series
90 Series
20 Series
RW Series
TDh Series
27www.ttieurope.com
ohmITE
By now you must have realised that, at Ohmite, we’re serious about modern lighting requirements and above are just some of the products which are in use today – there are plenty more. So if you have any problems with making it happen – we will have the solution.
Series Part No Prefix Resistance (Ω) WattageWirewound
20 20J – 27J 0.1 – 100K 1.0 – 10.0
40 40F – 45F 0.1 – 150K 1.0 – 10.0
Metalohm 20/45M – 85/150M 0.05 – 81K 20 – 150
89 805F – 850F 0.005 – 100K 5.0 – 50.0
90 90J – 95J 0.1 – 91K 1.5 – 11.0
270 L12J – L1000J 0.1 – 392K 12.0 – 1000
Wirewound/Low Value
10 12F – 15F 0.005 – 0.1 2.0 – 5.0
Surface mount
MCS MCS1632 – MCS3264 0.005 – 0.05 1.0 – 2.0
MacroChip MC101 – MC204 100 – 5G 0.75 – 3.25
RW1/RW2 (4Terminal) RW1SOCK – RW2SOCK 0.005 – 25K 1.0 – 2.0
TDh TDh35 0.1 – 5K 35
LvK (4Terminal) LvK12 – LvK25 0.001 – 0.5 0.5 – 2
Thick Film high Voltage
Slim Mox SM100 – SM410 100 – 5G 1.5 – 25K
Thick Film Power
TAP600 TAP600 1-10K 600
Composition/high Energy
Little Demon 0A – 0F 2.2 – 20M 2.1
Variable Voltage Controls
R RCL – RuS 0.5 – 50K 75 – 1000
oh
mIT
E
28 www.ttieurope.com
Solutions for Lightingg5RL-hR/g5RL-LNFeatures & Benefits• Low profile: 29x12, 7x15, 7mm (LxWxH) • Contact form SPST-NO, SPDT • Creepage and clearance distance between coil and contacts 8mm/8mm • Single pole 16A power relay • AC coil type and high inrush types available • Low noise version available (G5RL-LN) (approx. 25% (15dB)
less sound pressure than standard G5RL) • Conforms to uL, CSA & vDE • Resistive load 16A at 250vAC, 24vDC (NO), 5A at 250vAC, 24vDC (NC)• ROhS compliant
Contact Resistance 100mΩ max.
Operate Time 20ms max.
Release Time 20ms max.
Insulation Resistance 1,000MΩ min. (at 500VDC)
Dielectric Strength 6,000vAC, 50/60hz for 1 min between coil and contacts1,000vAC, 50/60hz for 1 min between contacts of same polarity
Impulse Withstand voltage 10 kV between coil and contacts (1.2×50μs)
vibration Resistance Destruction: 10 to 55hz, 1.5-mm double amplitudeMalfunction: 10 to 55hz, 1.5-mm double amplitude
Shock Resistance Destruction: 1,000m/s2 (approx. 100G)Malfunction: 100m/s2 (approx. 10G)
Life Expectancy Mechanical: 10,000,000 operations min. (at 18,000 operations/hr)
Electrical: 100,000 operations min. (at 1,800 operations/hr) (Resistive load, 12A, 250vAC/24vDC, NO contact)
50,000 operations min. (at 1,800 operations/hr) (Resistive load, 16A, 250vAC/24vDC, NO contact) (Resistive load, 5A, 250vAC/24vDC, NC contact)
Ambient Temperature Operating: –40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 5% to 85%
Weight Approx. 10g
g6D-1A-ASIFeatures & Benefits• Slim and miniature: 17.5x6.5x12.5mm (LxWxh) • Contact Form SPST-NO • Fully sealed • Highly efficient magnetic circuit for high sensitivity • Conforms to uL, CSA and vDE • Resistive Load 5A at 250vAC, 5A at 30vDC • ROhS compliant
Contact Resistance 100mΩ max.
Operate Time 10ms max.
Release Time 5ms max.
Insulation Resistance 1,000MΩ min. (at 500VDC)
Dielectric Strength 3,000vAC, 50/60hz for 1 min between coil and contacts750vAC, 50/60hz for 1 min between contacts of same polarity
Impulse Withstand voltage 6KV 1.2x50μsec (between coil and contacts)
Insulation DistanceCreepage (Typ) 4.5mm
Clearance (Typ) 4.5mm
Tracking Resistance (CTI) 100v
vibration Resistance Destruction: 10 to 55 to 10hz, 0.75-mm single amplitude (1.5-mm double amplitude)Malfunction: 10 to 55 to 10hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock Resistance Destruction: 1,000m/s2
Malfunction: 100m/s2
Endurance Mechanical: 20,000,000 operations min. (at 18,000 operations/hr)Electrical: 70,000 operations min. (5A at 250vAC/30vDC, resistive load)300,000 operations min. (2A at 250vAC/30vDC, resistive load)
Ambient Temperature Operating: -25°C to 70°C (with no icing)
Ambient humidity Operating: 5% to 85%
Weight Approx. 3g
omRoN
29www.ttieurope.com
PANASoNIC
ZNR Transient/Surge AbsorbersZNR transient/surge absorber, Series v, Type D features large surge current and energy handling capability for absorbing transient overvoltage in a compact size.
Features & Benefits• Wide varistor voltage ranges (v1mA=18v~1800v)• Large withstanding surge current capability in compact sizes• Large ‘Energy handling Capability’ absorbing transient overvoltages in
compact sizes• Wide range of varistor voltages• The standard products shown below have received uL, CSA and vDE
standards• varistor voltage 82-150v: uL, vDE• varistor voltage 200v over: uL, CSA, vDE• RohS compliant
Pyrolytic highly oriented graphite Sheet (PgS)Features & Benefits• Thermally conductive up to 1750W/mK• Thin and light weight up to 17µm and 1g/cm3 • Flexible customised shapes, curved and movable layout possible• Energy saving, no usage of electricity for heat transfer• high reliability compared with silicon solutions• Environmentally-friendly pure carbon (99.9%), no toxic substances,
no gas emission• Long life stable at normal atmospheric conditions and maintenance free• Heat resistant stable up to 400˚C• Improves reliability reduces & spreads-out hotspot temperature from
semiconductors• Miniaturised devices allows for a more compact circuit design• Magnetic shielding up to 90dB• various PGS versions adhesive and insulated versions available
Applications• LED/lighting equipment• Automotive lighting equipment• Medical equipment• Telecom and communication devices• Battery cooling• Temperature reduction of housing of devices• Miniaturised and downsized devices• handheld and portable devices• Optical equipment• Semiconductor manufacturing equipment• Embedded/PC applications
The two main thermal functions provided by PGS are:1) Thermal transfer – The PGS is acting as a heat pipe transferring the heat energy from the heat source to the heat sink, which allows a design positioning the heat sink not directly at the heat source.
2) Thermal interface – The PGS is improving the efficiency of the heat sink and achieves a hot-spot reduction. The PGS allows to spreads out the heat energy and improves the reliability of the semiconductor that produces the heat.
Applications • Transistor, diode, IC, thyristor or triac semiconductor protection• Surge protection in consumer electronic equipment• Surge protection in communication, measuring or controller electronics• Surge protection in electronic home appliances, gas or petroleum
appliances• Relay or electromagnetic valve surge absorption
Related Standards • uL1414, uL1449• CSA C22.2 No.1 Class 2221 01• vDE CECC42000, CECC42200, CECC42201, IEC61051• ‘Type designation(uL)’, ‘part number(CSA)’, ‘style ref. (vDE)’ are not
registered by product part no.
A
B
Decreasing the thermal resistance
and diffusing the heat
heat Sink
Package(heat Source)
Surface
temperature of
the package
With PGS the peak temp dropsWithout PGS
PGS PGS
A BB
B
A
B
B
Carrying the heat
PGS
Diffusing the heat heat Sink
heat Source
heat Source(MPus, PAs, graphic chips etc.)
PAN
ASo
NIC
30 www.ttieurope.com
PANASoNIC
SmD Current Sensing Shunt ResistorsCurrent Sensing Resistors are designed for low resistance so as to minimize power consumption. In order to meet the requirements of the market Panasonic offers a wide range of Current Sensing Resistors in many case sizes (0402 to 2512), many resistance values in different technologies.Metal plate technology and special constructions makes them suitable for the harsh environment while maintaining their high reliability. Double sided resistor element technology (ERJxBW-series) & wide terminal technology (ERJA, ERJB-series) for high power purpose. Furthermore Panasonic Current Sensing Resistors correspond to AEC-Q200 and therefore are ideal solution for even automotive applications.
Features & Benefits• Wide range of resistance values
starting from 0.001Ω• 0402 to 2512• Correspond to AEC-Q200• Large power dissipation capability• Soft termination to reduce risk
of solder joint cracking
Pulse Proof & high Power SmD ResistorsElectronic surge can occur anywhere in a vehicle’s electronic circuitry, industrial, measurement and telecom applications. Panasonic ERJP-Resistors have great Anti-Surge characteristics and excellent heat dissipation characteristics due to “Serpentine Resistor Pattern Structure” which helps to decrease electric field strength per unit length. Combined with a variety of small case sizes Panasonic Anti-Surge Resistors are suitable to replace MELF in plenty of cases. Furthermore, squared sized chip structure help to lead to better solder joint reliability which is perfect for a car’s hostile environments.
Features & Benefits• Serpentine resistor pattern • Decreases electric field strength
per unit length• Dispersion of loading heat• high power rating • 0603 size ERJP03: 0.20W• 0805 size ERJP06: 0.25W• 1206 size ERJP08: 0.33W• 1210 size ERJP14: 0.50W• high pulse resistance• high ESD resistance
SmD Power Chokes metal Composite molded TechnologyETQP3/4/5-Series Metal Composite Core Technology is suitable for high current at high switching frequency applications.The Metal Composite Power Choke Coil ‘PCC-MC type’ combines both high frequency and high power capability.By unique structure and technology Panasonic could succeed introducing the most reliable, robust SMD Power Choke Coil with highest power and efficiency is realised in the SMALLEST case size to the market.Metal Composite Power Choke Coils in 3 different case sizes (7x7mm; 8x8mm; 10x10mm) showing following unique outstanding performance:
1) highest performance at highest temperature and vibration – 150˚C temperature rating – up to 30G vibration – ‘Non-hard saturation’ characteristic,
high bias current condition– Non temperature impact on DC
bias characteristic– heat shock h/C 2000 cycles
(-40˚C to 150˚C)2) Outstanding power efficiency
– Minimised power loss at high frequency (>100kHz)
– Minus 50% AC resistance above 300khz compared to ferrite type
3) highest power in smallest SMD case size.
Film Capacitors for Noise Suppression for LED LightingPanasonic is introducing the ECQuA Series, a new X2 Safety Capacitor in compact and high reliability design. The series offers a guaranteed moisture resistance of 85˚C, 85%, 500h under loaded conditions. The ECQuA Series is produced with polypropylene film and has a patterned metallisation technology (100% Panasonic black box technology). Panasonic is using pure Aluminium for the metallisation of the foil together with our patterned structure this provides stable capacitance over the lifetime of the capacitor and the customer design/application. ECQuA is accredited in accordance with uL/CSA and European safety regulation class X2.
Features & Benefits• Rated voltage 275vAC/310vAC*• Capacitance range 0.1 to 1uF
(1.5uF and 2.2uF under development)• Temperature range -40˚C to +110˚CApplications• Lighting applications• Interference suppressors• Power supplies• Solar applications• Metering applications• home appliance
Terminal Laser Trimming Resistor
0805 Size(ERJP06)1210 Size(ERJP14)
1206 Size (ERJP08)
*(310vAC = maximum AC voltage not nominal continuously applied voltage)
31www.ttieurope.com
PANASoNIC
A-FR Series – New Low ESR CapacitorPanasonic is introducing the FR-Series, new Aluminium Electrolytic Capacitor in radial construction. This capacitor is the perfect solution for applications, which require ultra low ESR – very high ripple current – very long life in a small mounting form. In comparison to our current products e.g. FM series, we could achieve a lifetime upgrade of up to 100% (up to 10000h at 105˚C) and a capacitance increase of up to 30% by improving the material technology. The Radial FR series is in mass production and samples are available.
Features & Benefits• voltage range 6.3 – 63v• Capacitance range 22 – 8200uF• Lifetime 5000 to 10000h• Ripple current up to 3820mA• ESR down to 12mΩ (20˚C/100kHz)• Size Ø5x11mm to Ø16x25mm
Applications• LED applications• Switching mode power supply• Switching mode adapter• Line noise removal• LCD backlight• Applications with long lifetime requirements
Slimfit Capacitor – New A-HD PEN Cap Series The new Panasonic PEN Cap product line (Aluminium Electrolytic ThT Capacitors) convinces with high ripple current values and a long life in small diameters – perfectly fitting to the market needs requiring small and thin components.With their slim and long construction and the high performance PEN Caps are ideally matching for multiple applications in all industrial areas e.g.
lighting and home appliance.
Features & Benefits• high ripple current – up to 540mA (up to 750mA under development)• Miniaturisation – Ø10mm for slim designs• High reliability – 10000h lifetime at 105˚C
Applications• LED lighting• Ballast• Switching mode power supplies• All slim-design application e.g. LCD Tv, power supplies
Technical Data• Capacitance range 33uF to 47uF
(up to 110uF under development)• voltage range 400v to 450v• Temperature range -25˚C to +105˚C• Endurance 5000h/10000h at 105˚C• Size Ø10mm, length 40 to 50mm (Ø12.5mm under development)
Power Film Capacitor – ECWF(A) Series upgrade to 630VDC To fulfil an excellent feature of your designs, such as power supplies and lighting devices, the performance and characteristics of the used Film Capacitors is one key for the success.Panasonic developed with the new metallised Polypropylene Film Capacitor ECWF(A) 630v type a product outstanding in downsizing, low profile and high safety standards. An advanced patterned metallisation technology allows current to flow past a failed point bypassing failed cells and therefore increasing capacitor safety and miniaturisation of the components.The newly ECWF(A) 630vDC type contributes to the market requirements of downsizing of DC cut and active filter in inverter lighting circuits.
Features & Benefits• high safety – patterned metallisation technology• high reliability and moisture resistance –
85˚C/85% RH/500VDC/500h• high pulse current – up to 143A0-P• Low hum sound and excellent frequency characteristics• Small in size and low in profile• IEC 60065 Flammability requirement
Technical Data• Capacitance range 0.1uF to 2.2uF (630vDC)• Rated voltage 250vDC to 630vDC• Temperature range -40˚C to +105˚C
Typical circuit diagram for LED lighting
Applications• LED Lighting• high frequency and high current circuits• SMPS – switching mode power supply• Power factor correction• General power applications – AC to DC filtering• home appliance• General industry
X CapacitorClass X2
Y CapacitorClass Y3
PFC Cap(Active FilterCapacitor)
ResonanceCapacitor
Snubber Smoothing
Resonance type converterPFC Circuit
PAN
ASo
NIC
32 www.ttieurope.com
PhoENIX CoNTACT
SmD-Connectors for LED applicationsPhoenix Contact created a generation of small connectors that help lighting manufacturers to simplify the wiring of LED modules. The PTSM Series connectors are easy to integrate into existing SMT processes and feature fast, reliable connection technology.
When it comes to solid state lighting, more and more manufacturers use high-power LED boards for modular designs. A popular solution for these applications is to mount the high-power LEDs on a metalcore printed circuit board (MCPCB). The metal layer in these boards provides an excellent means to disperse heat from the LEDs but also has an adverse effect: Conventional through-hole connectors which ensure fast and easy wiring of the board cannot be used anymore.
Suitable push-in connectors for LED boards in surface-mount technology are still hard to find on the market. Therefore, it is common practice that the connection wires are often soldered to the MCPCB in an additional, sometimes even manual, process. Soldering to metal core boards is an energy- and time- consuming procedure that increases unit costs. Pressure of costs, quality issues and the unpleasant appearance of the connection drive manufacturers to look for better connectors for their LED boards.
PTSm ConnectorThe PTSM connector measures only 5mm in height and offers a wide range of beneficial features. Its housing is made from LCP (Liquid Crystal Polymer) to withstand the heat during the reflow process. Rugged SMD style anchors enable multiple wire termination and disengagement cycles. The connector is approved for stranded and solid wires and allows for cross sections up to 0.75mm2. Operation of the spring connector is comfortable and simple – a small screwdriver is the only tool needed for wire insertion/extraction.
Daisy chaining of LED modules is a popular method of arranging LED boards. This in turn means the supply current is getting higher with the number of modules connected together. Featuring a current rating of 6A, this small connector is more than sufficient for most applications using daisy chaining. Available in horizontal and vertical versions, the PTSM connector supports various design approaches.
In addition, hardware developers can choose between two mounting technologies: SMT for MCPCBs and pin-in-paste for ordinary PCBs. All products are wrapped in tape on reel.
PTSm/PTPm Plug & SmT header Systems Smaller, more Compact, Faster to ConnectThe PTSM spring cage plug connector with a 2.5mm pitch can conduct 6A at a voltage of 160v. Flexible and rigid wires can be connected with a cross section of between 0.14mm2 and 0.75mm2. The pierce contact PTPM plug connector also with a 2.5mm pitch conducts 4A at a voltage up to 160 V. The connector can clamp flexible conductors from AWG 26 to AWG 22. A range of only 5mm high ThR and SMD headers are available for these plug connectors. The LCP (Liquid Crystal Polymer) enclosures ensure that these headers can be easy handled in SMT processes.
These miniature plug connectors are especially suitable for connecting the power/data supply to LED boards which are used in lighting applications.
Features & Benefits• Current rating: up to 6A• voltage rating: 160v• Wire range: from 0.14mm2 up to 0.75mm2
• Metal parts: Cu alloy• Plating: tin plated• Insulator material: LCP (for header)
Plug connectors Conductor cross-section0.2mm 0.4mm
PTPM No. of pos. Order No. Order No.
2 1780477 1780529
4 1780480 1780532
6 1780493 1780545
8 1780503 1780558
PTSM No. of pos. Order No.
2 1778832
3 1778845
4 1778858
5 1778861
6 1778874
7 1778887
8 1778890
Print terminal blocks PTSm (Packed to 5, complete tape on reel packages available online)
horizontal verticalfor ThR applications No. of pos. Order No. Order No.
2 1701092 17011003 1701093 17011014 1701095 17011025 1701096 17011036 1701097 17011057 1701098 17011068 1701099 1701107
for SMD applications No. of pos. Order No. Order No.2 1701075 17010843 1701076 17010854 1701077 17010865 1701079 17010876 1701080 17010887 1701082 17010898 1701083 1701091
header for PTPm and PTSm plug connectors (Packed to 5, complete tape on reel packages available online)
horizontal verticalfor ThR applications No. of pos. Order No. Order No.
2 1785977 17859063 1785980 17859194 1785993 17859225 1786002 17859356 1786015 17859487 1786028 17859518 1786031 1785964
for SMD applications No. of pos. Order No. Order No.2 17860443 17860574 17860605 17860736 17860867 17860998 1786109
33www.ttieurope.com
PhoENIX CoNTACT
PTQ Terminal block with IDC Fast ConnectionThe PTQ mini PCB terminal block with an overall height of only 8mm and its small pitch of 2.5mm is developed for thru-hole soldering processes.unprepared wires are easy to feed into the terminal block. There is no need to strip the wires because insulation displacement contacts are closed by pushing down the actuation lever. Releasing the wires takes place by simply opening the actuation lever.No tools are needed for operating this terminal block. This makes it ideal for field wiring of various lighting applications.1702610 PTQ 0.3/ 2-2.5 ThR R321799099 SAMPLE PTQ 0.3/ 2-2.5 ThR R32
Features & Benefits• Current rating: up to 4A• voltage rating: up to 160v• Wire range: 0.14-0.34mm2 (suitable for stranded and solid wires)• Metal parts: Cu alloy• Plating: tin plated• Insulator material: LCP
PTSA Angled Print Terminal blockThis terminal Block with fast spring connection is ideal for LED driver and ballasts where wires need to be connected in an angle to the board. Available in 2 to 24 positions and 2.5mm or 3.5mm pin spacing, these terminal blocks are suitable for rigid and flexible wires up to 0.5mm2 or 1.5mm2, respectively.Bare, rigid wires are simply inserted into the termination points without the aid of tools.Only when loosening a wire from its terminal a standard screwdriver is needed to press the lever. voltage tests can be performed with a test probe when a wire is connected.1985195 PTSA 1.5/ 2-3.5-Z (with staggered solder pins)1985218 PTSA 1.5/ 4-3.5-Z (with staggered solder pins)1984963 PTSA 1.5/ 2-3.5-F (front solder pins)1984989 PTSA 1.5/ 4-3.5-F (front solder pins)
Features & Benefits• Current rating: 2A• voltage rating up to: 400v• Wire range: 0.14-1.5mm2 (suitable for stranded and solid wires)• Metal parts: Cu alloy• Plating: tin plated• Insulator material: PA
PTS 1.5 horizontal Print Terminal blockTerminal Block with fast spring connection is ideal for LED driver and ballasts where wires need to be connected in parallel to the board.The large clamping area accepts wire sizes up to 2,5mm2- the pitch is 5,0mm. Rigid wires are simply inserted into the termination points without the aid of tools. When loosening a wire- just a standard screwdriver is needed to press the lever. Its short footprint of only 10.5mm leaves room for additional functions on the board.1792863 PTS 1.5/ 2-5.0-h1792889 PTS 1.5/ 4-5.0-h1703083 PTS 1.5/ 2-7.5-h1703086 PTS 1.5/ 4-7.5-h
Features & Benefits• Current rating: 16A• voltage rating: 400v• Wire range: 0.2-2.5mm2 (suitable for stranded and solid wires)• Metal parts: Cu alloy• Plating: tin plated• Insulator material: PA
Pho
ENIX
Co
NTA
CT
34 www.ttieurope.com
SouRIAu
uTL SeriesThe uTL Series is a sealed plastic connector range able to carry up to 16A 500v.
Features & Benefits• Key shape coupling with latching retention system• Secure against unwanted tampering, designed to be overmoulded • Suitable for outdoor use, uv resistant, F1 material + IP68• Can be use in public environment, fire and smoke: UL94 5VA• Easy qualification of system by regulation authorities, compliant with luminaries standard UL 1598, IEC 60598
Technical Featuresmechanical• Durability: 1000 cycles (with stamped and formed contacts and
S18 plating)• vibration resistance: Sinusoidal vibrations per IEC 60512-4 from
10 to 2000hz• Body connector + Backshell: Thermoplastic• Insert: Thermoplastic• Nut: Metal
Electrical• Working voltage: 500v per uL 1977 277/480vAC per uL 1977• Rated current 16A• Connector for breaking circuit
Environmental• Operating temperature: from -40˚C to +105˚C• Flammability rating: uL 94 5vA• Salt spray: ≥ 1000hours• uv resistance: F1 material per the uL 746C• Sealing
– IP68/69K – IP6X mated and unmated – IPX8: mated (10m underwater during 1 week) – IPX8: unmated with sealed contact (1m underwater during 1 week)
Contact type Connector typePart number
male insert Female insert
Crimp contacts supply separately
Plug uTL6103G1P uTL6103G1S
Square flange receptacle uTL0103G1P uTL0103G1S
Jam nut receptacle uTL7103G1P uTL7103G1S
Inline receptacle uTL1103G1P uTL1103G1S
ContactsPart number Description
SC16M11S18 Female stamped and formed contact for AWG 16 wire
SM16M11S18 Male stamped and formed contact for AWG 16 wire
SC14M11S18 Female stamped and formed contact for AWG 16 wire
SM14M11S18 Male stamped and formed contact for AWG 16 wire
RM16M25K Male sealed contact for AWG 16 wire
RC16M25K Female sealed contact for AWG 16 wire
RM14M25K Male sealed contact for AWG 14 wire
RC14M25K Female sealed contact for AWG 14 wire
AccessoriesPart number Description
uTL10DCG Receptacle dustcap
uTL110BOOT Inline receptacle boot
uTL610BOOT Plug boot
35www.ttieurope.com
TT ELECTRoNICS
oVQ12S30x7 Flex moduleThe OVQ12S30x7 LED Light Strip is a flexible and scalable lighting solution using high brightness LEDs to supply illumination for residential, commercial, and industrial applications. up to 16 feet (5 meters) can be operated with a single 12v power supply. Dual-sided tape provides easy installation in most indoor applications and allows many different configurations.
Features & Benefits• versatile Flex Strip of 30 LEDs• Fast response time• Low power requirements• uL FILE E339817Applications• Commercial and residential decoration• under-counter lighting• Media illumination• Large area backlighting• Small to medium channel letters• Point-of-sale displays• Neon replacement
oV4ZRgbA Full Color RgbFeatures & Benefits• Designed with 4 1-watt chips in recessed cavity
with an optical grade 5mm diameter lens• Exceptional thermal resistance
(<2°C/W junction to heatsink)• Soldering points or pins provided for electrical
connections• Locating slots for M3 screwsApplications• Signage• Backlighting – architectural
oVSPW1bCR4 1-Watt SmD 6mmThe OVSPxBCR4 Series is an energy-efficient packaged LED source that offers high luminance, and a long operating lifespan. These devices offer a 120° viewing angle and an ultra-low profile (1.5mm) making them highly suitable for conventional lighting and specialised applications. Optional optics are offered to suit application.Features & Benefits• Robust energy-efficient design with long
operating life• Low thermal resistance• high luminous intensity• Optional optics to suit applicationApplications• Automotive exterior and interior lighting• Architectural indoor and outdoor lighting• General lighting• Electronic signs and signals
oVS5mWbCR4and oVS5mWWbCR4 mini half-Watt SmD 3.5mm
The mini-half watt is an energy-efficient packaged LED source that offers high luminance, and a long operating lifespan. This device offers a 120° viewing angle and an ultra-low profile (1.2mm) making it highly suitable for conventional lighting and specialised applications.Features & Benefits• Compact package outline of 3.5x3.5x1.2mm• Robust energy-efficient design with long
operating life• Low thermal resistance• Exceptional spatial uniformity• Compatible to IR reflow soldering• high lumens outputApplications• Automotive exterior and interior lighting• Architectural indoor and outdoor lighting• General lighting• Display backlighting• Electronic signs and signals
Fixed ResistorsVRW25/37/68 – high Voltage Thick Film Axial Resistors
Features & Benefits• high continuous voltage rating • Surge withstanding • Flameproof and EN60065 safety approved Application• Output stage of electronic lighting ballast
hVC high Voltage Chip ResistorFeatures & Benefits• Small footprint• up to 3kv on 2512 chip• Robust surge performanceApplications• Fluorescent tube inverters
uLW Wirewound mains Input ResistorFeatures & Benefits• Surge withstanding wirewound design • uL1412 recognised for safe mains fusing • UL94-V0 flameproof cement coating Application• Mains input stage of electronic lighting ballast
LRF3W high Power Current Sense Chip Resistor Features & Benefits
• Low values to R003• 3W in 2512 chip• Inverse terminations to help cool runningApplications• Current sense in LED drive circuit
TT E
LEC
TRo
NIC
S
36 www.ttieurope.com
Series brand Technical Data Features ordering Code/TypeFilm Capacitors (medium Power)MKP DC link vR: 450 to 1300vDC
CR: 1.5 to 110µFOperating temperature up to +105°Cuseful life of 100,000h at 1.0 x vR and +70°Chigh vibration resistance due to 4-pin terminals2- and 4-pin versionsLead spacing from 27.7 to 52.5mm
B32774 …B32776 …B32778 …
vR: 63 to 630vDCvRMS: 40 to 400vACCR: 0.001 to 220µF
Low-voltage DC-link applicationsOperating temperature up to +125°Cuseful life of 200,000 h at 1.0 x vR and +70°C
B32520 -B32529
MKP PFC vR: 450 … 630vDCCR: 0.010 … 2.2μF
Operating temperature up to +125°CSpecially designed for PFC stageLead spacing 10 … 22.5mm
B32671Z B32673Z B3261XP4
X1 vRMS: 300vACCR: 0.01 to 6.8µF
X1 class (4000v) for interference suppression and EMCApproved to international standardsAcross-the-line connectionLead spacing from 10 to 37.5mm
B32911 …B32912 …B32913 …B32914 …B32916 …
X2 vRMS: 305vACCR: 10nF … 45μF
X2 class (2500v) for interference suppression and EMCApproved acc. to international standardsLead spacing 10 … 52.5mm
B32921 … B32928
y2 vRMS: 300vACCR: 1nF … 1μF
y2 (8000v) class for interference suppression and EMCApproved acc. to international standardsLine to ground connectionLead spacing 10 … 37.5mm
B32021 … B32026
InductorsSIMID0603 … 2220SmD
LR: 1nh … 10mhIR: up to 3.5A
Laser-welded, moldedhigh current capability
B82422B82432B82442B82496C … B82498F …
Ring core chokes, double
LR: 0.19 … 100mhIR: 0.25 … 62AvR: 250 … 300vAC
250 …1000vDC (DC link)
high resonance frequency owing to special winding techniqueApproximately 1% stray inductance for symmetrical interference suppressionPlastic case with terminalshigher current chokes on baseplate, winding wire serves as solder terminal
B8272 … B82791h2 … B82791G2 …
Framecore chokes (FC) LR: 10 … 100mhIR: 0.45 … 2.3A
Closed magnetic circuit with frame construction4-section windingApproximately 2% stray inductance, excellent differential mode suppressionhigh pulse-handling capabilityLow height allows usage in lamp ballastsOptional: magnetic bypass to increase stray inductance
B82732F … B82733F …
Leaded RF chokes LR: 0.1µh … 100mhIR: up to 2.5A
high current capabilityLow DC resistancevery good saturation characteristicsAxial and radial leaded versions
B781 …B8214 …
Power inductors LR: 0.82 … 1000µhIR: up to 11A
Shielded and unshielded versionsLow profile versions down to 1mm heighthigh current capabilityLow DC resistance
B8246 …B8247 …
LR: 1.2 … 1500µhIR: 130 … 8200mACase sizes: 6025 … 12575
Low profile, low DC resistance, and high current capabilitiesSuitable for high-density mounting configurationsFlat bottom surface ensures secure, reliable mounting
SLF Series
TDK-EPC
EPCoS and TDK components for LED lightingA wide spectrum of EPCOS and TDK components are available for existing and new LED applications, ranging from low-power indoor lighting solutions all the way to high-power 100W LED streetlights.
37www.ttieurope.com
Series brand Technical Data Features ordering Code/TypeNTC Thermistorsv2v3v4SmD
Temperature range: –55 … +125°C (+150°C upon request)Rated resistance at 25°C: 47Ω … 470kΩResistance tolerance: ±3, ±5%; ±1%Case sizes: 0402/0603/0805
Wide range of resistances and tolerancesMultilayer SMD NTC with inner electrodesvery good aging stability in high-temperature environmentvery good resistance stability during soldering (change <1%)
B572**v … B573**v … B574**v …
S86S87S88S964K1150K220
Temperature range: –55 … +155°CRated resistance at 25°C: 2 … 100kΩResistance tolerance: ±1 … ±5%
Nonstandard lead configurationsTaped versions for automatic processingLead spacing 2.5 and 5.0mm (S87, S88)uL approval (S86)
B5786*S … B5787*S … B5788*S … B57962S …
PTC ThermistorsLimit temperature sensor, chipA641SmD
Sensing temperature: 75 … 145°C in steps of 10°CRR: 470ΩTolerances: ±5°C
EIA 0603Lead-free tinned terminations
B59641A …
Temperature sensor probeD901
Sensing temperature: 60 … 130°C in steps of 10°CRR: ≤100Ω
Sensor with epoxy resin coatingMetal tag for easy mountingGood thermal contactShort response time
B59901D …
VaristorsMLv, CeraDiodes0402 … 2220SmD
Operating voltage vRMS: 4 … 60vSurge current up to 1200AOperating temperature up to +125°C
Bidirectional clampingStable protection levelMinimum leakage current
B72500B72510B72520B72530
S05S07S10S14S20
Imax 8/20μs: up to 800AImax 8/20μs: up to 1750AImax 8/20μs: up to 3.5kAImax 8/20μs: up to 6kAImax 8/20μs: up to 12kA
Operating voltage vRMS: 11 … 1100vhigh surge current ratings up to 12kAhigh energy ratings (2ms) up to 440JFor high energy absorption
B72205S … B72207S … B72210S … B72214S … B72220S …
Ceramic CapacitorsMultilayer ceramic capacitors (mid-voltage)
Temp. characteristic: Ch, C0G, B, X7R, X5RvR: 100 … 630vCase sizes: 1005 … 5750
unique design structure for mid-voltage enables a compact size with ability to withstand high voltages
C Series
Leaded ceramic capacitors (mid-voltage, safety certified)
CD Series:Temp. characteristic: B, EvR: 250, 400vC: 100pF … 4.7nFCS Series:Temp. characteristic: B, E, FvR: 250, 400vC: 100pF … 10nF
Compliant with safety standardsFlame-resistant, reinforced outer insulation prevents fires, electrical shock, and other potential hazards
CD/CS Series
TDK-EPC
TDK
-EPC
38 www.ttieurope.com
TE CoNNECTIVITy
CoolSplice ConnectorsFeatures & Benefits• 230vAC Max. Current 2.5A Max.• <50vrms AC <120vDC Current 5A Max.• No special tooling required• Optional IP65 & 67 sealing• Sealed and unsealed parts available
Applications• Commercial refrigerators• Display cabinets• Outdoor lighting• Industrial applications• Lighting controls• General installations with 0.75mm 2 (18AWG & 20-22AWG) wire-to-wire
Part Numbersunsealed, green 18AWG 293545-1
Sealed, blue 18AWG 293545-2
unsealed, green 20-22AWG 293545-3
Sealed, blue 20-22AWG 293545-4
miniature hermaphroditic Connectors board-to-boardFeatures & Benefits• voltage rating 300vAC/DC, Current rating 3A Max. • Connector mates with itself • Available in 2, 4 and 6 position • Pitch 3.00mm • Connector height 2.30mm; Mated length (2 connectors) 11.00mm
Applications• Cabinet lighting • Furniture lighting • Advertisement lighting • Refrigerator lighting • LED strip lighting
Part Numbers2 position 1971567-1
4 position 1971567-2
6 position 1971567-3
SmT and Thru-hole Poke-In Wire Lighting ConnectorsFeatures & Benefits• voltage rating 250vAC/DC, Current rating 5A Max.• 1 and 2 position SMT and Thru-hole versions; black and white colours• Sub 4.00mm height with rounded edges minimises shadowing• Accepts 18 & 20AWG pre-bond stranded, 18AWG stranded wire• Accepts 18-22AWG solid wire• Tape & reel packaging for high speed processing
Applications• Channel signage• LED string lighting• LED fixtures• Architectural lighting• Shelf/cabinet lighting• Refrigeration lighting• Display lighting
Part Numbers1 position, white 2008563-1
1 position, black 2008563-2
2 position, white 1954097-1
2 position, black 1-1954097-1
39www.ttieurope.com
TE CoNNECTIVITy
hermaphroditic blade & Receptacle Connectors board-to-boardFeatures & Benefits• 125vAC/DC, Current rating 6A Max.• Connector mates with itself 2, 4 and 6 position, black and white colours• Connector mates vertically & horizontally; articulates through 90 to 180
degrees• Low profile with rounded edges to minimise shadowing
Applications• Channel signage• LED string lighting• Lighting controls
Part Numbers2 position, white 1954289-1
2 position, black 1-1954289-1
4 position, white 1954289-2
4 position, black 1-1954289-2
6 position, white 1954289-3
6 position, black 1-1954289-3
IDC SSL ConnectorFeatures & Benefits• 400vAC/400vDC, Current 8A Max. (18AWG only)• Available in 1, 2, 3 & 4 position• 18 to 24AWG stranded & solid wire• Wire gauge colour coded• Tool-less termination
Applications• LED lighting controls• General illumination LED fixtures• LED string lighting• Non-lighting wire-to-board applications
Part NumbersClosed End Connector (SMT) Feed Through Connector (SMT)
1 position X-2106003-1 X-2106431-1
2 position X-2106003-2 X-2106431-2
3 position X-2106003-3 X-2106431-3
4 position X-2106003-4 X-2106431-4
SlimSeal SSL ConnectorFeatures & Benefits• 400vAC/DC, Current 5A (18-20AWG) 3.5A (22-24AWG)• Available in 2, 3 and 4 position• IP67 sealing, uv resistant material• Positive latching, polarised connectors• Wire-to-board and wire-to-wire versions
Applications• Architectural lighting• Flood lighting• Spot lighting• Tunnel lighting
Part NumbersRight Angle SMT header Assembly
Plug Cable Assembly Receptacle Cable Assembly
2 position 2106056-2 2106378-2 2106391-2
3 position 2106056-5 2106378-3 2106391-3
4 position 2106056-8 2106378-4 2106391-4
TE C
oN
NEC
TIVI
Ty
40 www.ttieurope.com
Inverted SmT Thru-board Connector Features & Benefits• 70vAC/70vDC, Current 3A (24AWG), 2.5A (26AWG), 1.5A (28AWG)• Available in 2 to 6 position• Brings power to LED from underside of PCB• Low profile design• Mates with standard ‘Mini-CT’ product
Applications• LED lighting controls• Indoor & outdoor lighting fixtures• LED luminaires• Non-lighting applications that require wire dress connections
below the PCB
Part NumbersConnector Cable Assembly
2 position 2106091-1 2058943-1
3 position 2106091-2 2058943-2
4 position 2106091-3 2058943-3
5 position 2106091-4 2058943-4
6 position 2106091-5 2058943-5
LIghT-N-LoK ConnectorFeatures & Benefits• 600vAC, Current 5A Max.• Available in 2 & 3 position• Poke-in termination for 18AWG solid wire; tool-less• Supplied with integral contacts• Mated pair is one single part number
Applications• Commercial lighting• Any wire-to-wire connection application• Hot pluggable disconnect for fluorescent lighting fixtures in
commercial buildings
Part Numbers2 position, mated pair 2008144-1
3 position, mated pair 2008152-1
Solderless LED Socket, Type NL2Features & Benefits• Solderless termination to Nichia COB-L series LED• Poke-in wire terminals• LED retained in housing with slight press-fit (LED not included)• uv resistant housing material • Two screw attachment using M3 or #4 screws• Integrated features for polarization on heat sink
Applications• Retail lighting• Commercial down lights• high bay lighting
Part NumberSolderless LED Socket, Type NL2 2174024-1
TE CoNNECTIVITy
41www.ttieurope.com
TE CoNNECTIVITy
TE Solderless LED Socket, Type LSFeatures & Benefits• Solderless termination to LuXEON S LED• Integral optics attachment features• LED locator to aid assembly• Three screw attachment using M3 or #4 screws• No-strip IDC termination of 24 AWG solid & stranded wires• Integral thermal spring frame helps provide adequate normal force for
LED to heat sink• Low profile – housing optical interference <2% of total LED light output
Applications• Custom single source spot lighting fixtures• Lighting fixtures requiring multiple distributed, high intensity sources• Integrated retrofit spot lights (PAR30, PAR38, MR-16)
Part NumbersSolderless LED Socket, Type LS without optics latches 2154235-1
Solderless LED Socket, Type LS with optics latches 2154235-2
Solderless LED Socket, Type LS punch tool 2154473-1
Solderless LED Socket, Type LS snap-on reflector 1-2154430-1
Solderless LED Socket, Type CmFeatures & Benefits• Solderless termination to the Cree XLamp MP-L LED• Fast, rapid termination and assembly – eliminates hand soldering wires to
the MPL 0.70mm x 0.85mm pads• Offered in separable board termination and wire termination versions• Snap-on optics assembly using LEDIL’s Tyra series reflector optics• Custom parallel and serial AMPMini CT cable assembly lengths are
available upon request
Applications• Commercial and residential lighting fixtures• Integrated custom lighting
Part NumbersDescription Parallel Serial
LED to wire without optics latch 2106946-1 2106947-1
LED to wire with optics latch 2106946-2 2106947-2
LED to board without optics latch 2106946-3 2106947-3
LED to board with optics latch 2106946-4 2106947-4
LED to inverted wire, without optics latch 2106946-5 2106947-5
LED to inverted wire, with optics latch 2406946-6 2106947-6
AMP Mini CT 2 conductor cable assembly 2154000-1
AMP Mini CT 6 conductor cable assembly 2058943-5
AC mains LED Lighting ProtectionMetal Oxide varistors (MOvs) are typically used for transient overvoltage suppression in AC line voltage applications. Lightning, inductive load switching, or capacitor bank switching may cause transient overvoltage conditions. In these applications, there also exists the potential for a sustained abnormal overvoltage/limited current condition that may cause the MOv to go into thermal runaway, resulting in overheating, outgassing and possibly fire. New thermally enhanced MOVs help protect a wide variety of low-power systems against damage caused by overcurrent, overtemperature and overvoltage faults, including lightning strikes, electrostatic discharge (ESD) surges, loss of neutral, incorrect input voltage and power induction.
CoolSplice, LIGhT-N-LOK, SlimSeal, TE Connectivity and TE connectivity (logo) are trademarks. Cree and XLamp are registrations and MP-L is a trademark of Cree, Inc.LuXEON is a registered trademark of Philips Lumileds Lighting Company uS, LLC.Nichia is a trademark of Nichia Corporation.
TE C
oN
NEC
TIVI
Ty
42 www.ttieurope.com
Aluminium Capacitors159 PuL-SI ultra Long Life, Snap-In Aluminium Capacitors SeriesFeatures & Benefits• Polarised aluminium electrolytic capacitors, non-solid electrolyte• Large types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve• Low ESR, high ripple current capability• useful life: 5000h at 105°C• Keyed polarity snap-in version available
Applications• DC-link capacitor in inverter for street lighting• General purpose, industrial and audio/video systems• Smoothing and filtering• Standard and switched mode power supplies• Energy storage in pulse systems
146 RTI Radial Aluminium Capacitors SeriesFeatures & Benefits• Polarised aluminium electrolytic capacitors, non-solid electrolyte• Radial leads, cylindrical aluminium case with pressure relief, insulated with a blue PET sleeve• Charge and discharge proof• very long life: 2500h to 6000h at 125°C, high stability, high reliability• very low ESR• Excellent ripple current capability
Applications • Power supplies (SMPS, DC/DC converters) for industrial, automotive,
telecommunications and military• Smoothing, filtering and buffering
146 CTI SmD Aluminium CapacitorsFeatures & Benefits• Polarised aluminium electrolytic capacitors, non-solid electrolyte, self healing• Soldering heat resistant according to IPC/JEDEC J-STD-020• Low impedance down to 0.035Ω at 20°C, 100kHz• high ripple current: up to 1.75A at 125°C, 100khz• Long useful life: up to 6000h at 125°C• Charge and discharge proof, no peak current limitation• vibration proof, 4-pin version and 6-pin version
Applications• SMD technology, for high temperature reflow soldering• Industrial and professional applications• Automotive, general industrial, telecom• Smoothing, filtering, buffering
InductorsIhLP® SmD Power Inductors SeriesFeatures & Benefits• 9 footprints and 12 height profiles available• Shielded construction• Standard inductance values to 100µh• Frequency range to 5Mhz
Applications • DC/DC Converters (boost or buck) for LED driver circuits• High current noise filtering• high temperature (155°C operation)
Film CapacitorsMKP1848S Series, Slim film Capacitors for Mid-Power ElectronicsFeatures & Benefits• Lifetime 100000 hours at uNDC and 70°C• No internal electrolyte, no storage problems, long lifetime• 500v, 700v and 900v availability • Slim design: 12/15/18/24mm height• Operating temperature up to 105°C
Applications• DC-link capacitor for low profile LED street lighting
VIShAy
43www.ttieurope.com
Draloric beyschlag ResistorsTFu SeriesFeatures & Benefits• very quick acting fusing characteristics• Standard SMD size, chip size 0603• Rated currents 1.5A up to 4.0A• Lead (Pb)-free solder contacts• Halogen-free according to IEC 61249-2-21 definition• uL recognition approval according to uL 248-14
Applications• Information technology• Telecommunication• Audio/video electronics
mFu SeriesFeatures & Benefits• Advanced thin film technology• very quick acting fusing characteristics• Narrow spread of fusing characteristics• Green product, supports lead (Pb)-free soldering• Standard chip sizes 0402 up to 1206• Rated currents 0.5A up to 6.3A• Halogen-free according to IEC 61249-2-21 definition• uL recognition approval according to uL 248-14
Applications• Information technology• Industrial electronics• Automotive electronics• Telecommunication• Medical equipment• Audio/video electronics
mELF SeriesFeatures & Benefits• Superior pulse handling capability up to 3kv or 1kW for 0207• Excellent long term stability down to class 0.05• Operating voltage up to 350v• Resistance range from 0.1W up to 15MW
Applications • Lighting ballast • Power supplies• Control units
mC SeriesFeatures & Benefits• high pulse stability up to 10W or 300v for 0805• Power operation mode up to 155°C film temperature• very high long term stability down to class 0.1• Resistance range for precision resistors available up to 2MW
Applications• Lighting ballast • Power supplies• Control units
VR25 and Z300Pulse Proof Thick Film Chip Resistor – D/CRCW-IF e3Features & Benefits• high pulse performance• Tolerance 5%, 10%• RohS compliant• AEC-Q200 qualified
Applications • high and repetitive pulse loading• hID headlight/AFL charge and discharge• Lighting supplies• Medical equipment
VIShAy
VISh
Ay
44 www.ttieurope.com
Power miniLEDs The vLMx223 is a new series of super red, red, amber, soft orange, and yellow power MiniLEDs in ultra-compact, surface mount package. 3x higher intensity than standard AlInGaP LEDs.
Features & Benefits• 2.3mm by 1.3mm by 1.4mm • AEC-Q101 qualified • high intensity up to 1400mcd • high drive currents up to 50mA • ± 60° angle of half-intensity
Applications • Automotive : Interior and exterior lighting• Traffic signals and signs• Indicators• Backlighting
Ambient Light Sensors Features & Benefits• Surface mount package and leaded package available• AEC-Q101 qualification available• high photo sensitivity• Adapted to human eye responsivity• Supression filter for near infrared radiation available• Angle of half sensitivity: ϕ = ±20° to ± 60°• Lead (Pb)-free reflow soldering• Compliant to RohS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
Applications• Ambient light sensor for control of display backlight dimming in LCD
displays and keypad backlighting of mobile devices and in industrial on/off-lighting operation.- Automotive sensors- Mobile phones- Notebook computers- PDAs- Cameras- Dashboards
output Part Number mounting Size (mm) Peak Wavelength (nm)
bandwidth (nm) Angle of half Sensitivity (±*)
Light Current Standard A (µA)
Phototransistor
TEMT6200FX01 SMD 1.2 x 2.0 x 0.85 550 450 – 610 60 12
TEMT6000X01 SMD 2.0 x 4.0 x 1.0 570 430 – 800 60 50
TEPT5700 Leaded 5mm, flat top 570 430 – 800 50 75
TEPT5600 Leaded 5mm 570 430 – 800 20 350
TEPT4400 Leaded 3mm 570 430 – 800 30 200
Photodidode
TEMD6010FX01 SMD 2.0 x 4.0 x 1.0 540 430 – 610 60 0.04
TEMD5510FX01 SMD 4.2 x 5.0 x 1.1 540 430 – 610 65 1
TEMD6200FX01 SMD 1.2 x 2.0 x 0.85 540 430 – 610 60 0.04
BPW21R Leaded TO5 – 8mm 565 420 – 675 50 0.9
1.0
0.8
0.6
0.4
0.2
0.00 500 700 1000 1500
Visible Infrared
TEMT6200FX01
Wavelength (nm)
Sunlight (5800 K)
Incandescent light
TEMT6200FX01
Human Eye
Silicon Photodiode
Photopic Peak 550 nm
1.0
0.8
0.6
0.4
0.2
0.00 500 700 1000 1500
Visible Infrared
TEMT6200FX01
Wavelength (nm)
Sunlight (5800 K)
Incandescent light
TEMT6200FX01
Human Eye
Silicon Photodiode
Photopic Peak 550 nm
TEMD5510FX01 TEMT6200FX01TEMD6200FX01
TEMT6000X01TEMD6010FX01
TEPT5600 TEPT4400 TEPT5700 BPW21R
VIShAy
45www.ttieurope.com
Fully Integrated Proximity and Ambient Light Sensor The vCNL4010 is a fully integrated proximity and ambient light sensor. Fully integrated means that the infrared emitter is included in the package. It also has 16-bit resolution, a signal processing IC, standard I2C communication and an interrupt function.
Features & Benefits• No mechanical barriers required; no crosstalk concerns• Proximity range up to 20cm (7.9 in)• Programmable LED drive current: 10mA to 200mA in 10mA steps • Programmable measurement rate from 1hz to 250hz • 16 bit resolution with I2C interface• Ambient light sensing from 0klx to 13klx with 0.33lx resolution• Interrupt function
Applications • Turn off LCD backlight or lock touchscreen based on proximity for smart phones, touch phones and tablets• Optical switch for industrial devices and displays• Touchless lighting control
Avalanche RectifiersLow-profile, surface-mount standard, fast, and ultrafast avalanche rectifiers feature 20mJ EAS avalanche capability and industry-high forward currents to 4 A in miniature SMP and SMPC packages
Features & Benefits• 20mJ EAS avalanche capability• Low-profile packages for space savings:• SMP package features 1.0mm profile, while the SMPC offers a profile of 1.1mm• high forward currents: – up to 4A in the SMPC package – up to 1.5A in the SMP package• Offer designers a choice of 200v, 400v, 600v, 800v, or 1000v reverse voltage ratings
Applications• Secondary rectification and freewheeling diodes for very fast switching of ac-to-dc and dc-to-dc converters in high-temperature conditions for
consumer, lighting, and automotive applicationsPart numbers: AS1Px, AR1Px, Au1Px, AS3Px, AS4Px, AR3Px, AR4Px, Au2Px and Au3Px
LED modules for Street and Industrial LightsFeatures & Benefits• 12, 24 or 36 LEDs per panel • Thickness of aluminium core > 0.75mm• Single side, single layer PCB• Reflectors and drivers available• Maximum forward current 750mA per row• LM80 Certified LEDs • Two options for angle of half intensity:
– vLSL5 – vertical 70°, horizontal 120° – vLSL4 – 160°
• Binning by luminous flux and color
White Colour Part Number Colour Temperature (˚K) matrix (R x C) LEDs Viewing Angle (˚) Luminous Flux Reflectors Driver
Cool
vLSLx012A
5000-7000
2 x 6 12 160or
120 x 70
1740
vLSL-REFL01up to 6 per panel vLSL3-Du
vLSLx024A 4 x 6 24 3480
vLSLx036A 6 x 6 36 5220
Neutral
vLSLx112A
4000
2 x 6 12 160or
120 x 70
1500
vLSLx124A 4 x 6 24 3000
vLSLx136A 6 x 6 36 4500
Warm
vLSL4212A
3500
2 x 6 12
160
1500
vLSL4224A 4 x 6 24 3000
vLSL4236A 6 x 6 36 4500
VIShAy
VISh
Ay
46 www.ttieurope.com
yAgEo
Recommended ProductsThe lighting industry is undergoing rapid changes in the quest for energy efficiency, longer life, and performance. As the world’s leading supplier of passive components, yageo offers a full range of reliable, efficient and innovative components for illumination and lighting applications. The components are suitable for indoor, outdoor and architectural lighting.
Mid-Voltage MLCC-CC (≥ 100V) SeriesFeatures & Benefits• Materials: NP0 and X7R• Size: 0402-1812• voltage from 100v-630v• For high frequency snubber• Decoupling/smoothing function
Applications• Power supplies
high Capacitance mLCCFeatures & Benefits• Materials: X5R, X7R and y5v• Size: 0402-1812• Capacitance from 1μF-100μF• Rated working voltage from 6.3v-50v
Applications• Decoupling and smoothing
Low TCR Current Sensing Resistors – PT SeriesFeatures & Benefits• Excellent TCR compared to thick
film low ohmic counterparts
• Precision current sensing control• Ultra low ohmic down to 0.001Ω• Power enhancement• highly reliable multilayer electrode
construction• Compatible with RohS directive
2002/95/EC
Applications• Power supplies• DC-DC Converters
metal glazed Film Resistors – hhV SeriesFeatures & Benefits• high ohmic/voltage • high pulse loading capability (up
to 7kv)• Rmax.= 68MΩ, Umax.= 14kV• Excellent stability and reliability• Flameproof multilayer coating
(uL94v-0)
Applications• Picture tubes• Electronic ballasts
High-Voltage MLCC-CC (≥ 100V) and SC Series (≥ 1KV)Features & Benefits• Materials: NP0 and X7R• Size: 1206-1812• voltage from 1kv-3kv• high DC withstanding voltage
(≥1.2V Rated)• Safety Certification Series:
– TUV certification for 1808 and 1812 size (X1/y2 & X2/y3)
– UL certification for 1808 and 1812 size (X1/y2)
• Excellent stability & hv performance
Applications• Reinforced insulation prevents fires,
electric shocks and other potential hazards
• Rectification circuit
Thin Film Precision grade Resistors – RT SeriesFeatures & Benefits• high precision, high stability• Low TCR/low noise• high accuracy (±0.05%, ±0.1%,
±0.25%, ±0.5%, ±1%)
Applications• Electronic ballasts
Europe’s largest inventory of Passive, Interconnect, Discrete, Relay & Switch Components.
39 Sales locations across Europe Connector assembly & value added services mechanised distribution centres Inventory profile over 500,000 part numbers Ship over 3.5 million line items annually only distributor with catalogue division – mouser Industry leading service, support and value
TTI
European hQ, munich 10,000m2 of dedicated warehouse space
global Visibilityon a centralised inventory system
48 www.ttieurope.com TTI, Inc. – Never Short on Solutions
www.ttieurope.com
CORPORATE hEADQuARTERS TTI, Inc.2441 Northeast ParkwayFort Worth, Texas 76106u.S.A.T: +1 817 740 9000F: +1 817 740 9898E: [email protected]
EuROPEAN hEADQuARTERSTTI, Inc.Ganghoferstr. 3482216 Maisach-GernlindenGermanyT: +49 (0) 81 42 66 80 0F: +49 (0) 81 42 66 80 490E: [email protected]
L0312v1
ISO 9001:2008Registered
TTI, Inc. Sales
Contact TTI today to find out what a true specialist can offer.
AuSTRIA Vienna T: +43 (0) 18 79 85 90 F: +43 (0) 18 79 85 90 10 E: [email protected]
BENELuX Eindhoven T: +31 (0) 40 290 1616 F: +31 (0) 40 290 1610 E: [email protected]
BuLGARIA T: +359 (0) 52 51 10 59 F: +359 (0) 52 51 10 59 E: [email protected]
CZECh/SLOvAK REPuBLIC brno T: +420 541 126 710 F: +420 541 126 730 E: [email protected]
DENMARK Copenhagen T: +45 (0) 43 29 35 35 F: +45 (0) 43 29 35 30 E: [email protected] T:+ 45 (0) 38 41 31 00 F:+ 45 (0) 70 70 11 74 E: [email protected]
FINLAND Espoo T: +358 98 94 65 200 F: +358 98 94 65 210 E: [email protected]
FRANCE brive T: +33 (0) 5 55 92 92 93 F: +33 (0) 5 55 92 91 90 E: [email protected] (Covering North Africa)bruz T: +33 (0)2 99 77 60 84 F: +33 (0)2 99 41 18 47 E: [email protected]
GERMANy munich T: +49 (0) 81 42 66 80 110 F: +49 (0) 81 42 66 80 199 E: [email protected] T: +49 (0) 5 11 7 80 59 0 F: +49 (0) 5 11 7 42 49 0 E: [email protected] T: +49 (0) 7231 14788 0 F: +49 (0) 7231 14788 99 E: [email protected] T: +49 (0) 6102 5999 100 F: +49 (0) 6102 5999 199 E: [email protected]
Dortmund T: +49 (0) 2301 91 304 0 F: +49 (0) 2301 91 304 11 E: [email protected] T: +49 (0) 30 8877 40 200 F: +49 (0) 30 8877 40 299 E: [email protected]
huNGARy budapest T: +36 1 40 22 111 F: +36 1 40 22 105 E: [email protected]
IRELAND T: +353 (0) 21 480 8070 F: +353 (0) 21 432 3350 E: [email protected]
ISRAEL/Net-Aye T: +972 (0) 9 7687777 F: +972 (0) 9 7667107 E: [email protected]
ITALy milan T: +39 02 822 521 F: +39 02 822 522 33 E: [email protected] T: +39 049 774 683 F: +39 049 792 7738 E: [email protected] T: +39 051 632 1863 F: +39 051 714 839 E: [email protected] T: +39 055 0946 376 F: +39 055 0946 379 E: [email protected]
NORWAy Drammen T: +47 (0) 32 20 09 50 F: +47 (0) 32 20 09 51 E: [email protected]
POLAND Kwidzyn T: +48 (0) 55 279 67 57 F: +48 (0) 55 279 75 50 E: [email protected]
PORTuGAL T: +34 (0) 93 645 25 75 F: +34 (0) 93 645 25 93 E: [email protected]
ROMANIA Cluj Napoca T: +40 (0) 264 439 103 F: +40 (0) 264 439 106 E: [email protected]
RuSSIA Sankt-Petersburg T: +7 812 9726498 F: +7 812 4962053 E: [email protected]
SOuTh AFRICA Johannesburg T: +27 (0) 11 795 2690 F: +27 (0) 11 795 1298 E: [email protected]
SPAIN barcelona T: +34 (0) 93 645 25 75 F: +34 (0) 93 645 25 93 E: [email protected] T: +34 (0) 91 416 11 90 F: +34 (0) 91 416 12 90 E: [email protected] T: +34 (0) 94 623 25 80 F: +34 (0) 94 623 25 81 E: [email protected]
SWEDEN Stockholm T: +46 (0) 8 594 11 800 F: +46 (0) 8 594 11 801 E: [email protected] T: +46 (0) 31 741 12 90 F: +46 (0) 31 741 12 91 E: [email protected]
SWITZERLAND baar T: +41 (0) 41 76741 90 F: +41 (0) 41 76741 99 E: [email protected]
TuNISIA T: +216 71433144 F: +216 71428539 E: [email protected]
TuRKEy Istanbul T: +90 216 339 2247 F: +90 216 339 2257 E: [email protected]
uNITED KINGDOM high Wycombe T: +44 (0)1494 460000 F: +44 (0)1494 460090 E: [email protected] T: +44 (0)1268 889520 F: +44 (0)1268 888047 E: [email protected] Aerospace Office T: +44 (0)1268 889520 F: +44 (0)1268 419225 E: [email protected]