TTC Berkeley Campus Spring 2015 Brochure
2
Continuing Education Course Schedule December 2014-April 2015 • Berkeley Campus Welding Safety, use and care of the equipment are emphasized in each course. Also covered is NCCER Welding Safety Module 29101-09. Participants must provide their own welding safety equipment and tools. Cost of NCCER Welding Safety Trainee Guide is included in the course fee. Basic Gas Metal Arc Welding – MIG (GMAW) $545 This 32-hour course introduces the basic techniques used in Gas Metal Arc Welding – MIG Welding in the flat and horizontal positions. XWLD 502-B01 1/10-31 S 8 a.m.-4:30 p.m. Basic Gas Tungsten Arc Welding – TIG (GTAW) $545 This course introduces the basic principles of Gas Tungsten Arc – TIG Welding in the flat and horizontal positions. XWLD 503-B01 1/10-31 S 8 a.m.-4:30 p.m. Basic Shielded Metal Arc Welding – STICK (SMAW) $545 This 32-hour course introduces the basic principles of SMAW – Stick Welding in the flat and horizontal positions. XWLD 501-B01 1/10-31 S 8 a.m.-4:30 p.m.
-
Upload
trident-technical-college-division-of-continuing-education-and-economic-development -
Category
Documents
-
view
220 -
download
2
description
Brochure promoting spring 2015 classes at the Trident Technical College Palmer Campus in downtown Charleston, South Carolina. Classes are offered through the Trident Technical College Division of Continuing Education and Economic Development which is based in North Charleston, South Carolina. Classes include: Basic Gas Metal Arc Welding – MIG (GMAW); Basic Gas Tungsten Arc Welding – TIG (GTAW); and Basic Shielded Metal Arc Welding – STICK (SMAW). (Produced Nov. 2014)
Transcript of TTC Berkeley Campus Spring 2015 Brochure
Continuing Education Course ScheduleDecember 2014-April 2015 • Berkeley Campus
Welding Safety, use and care of the equipment are
emphasized in each course. Also covered is NCCER Welding Safety Module 29101-09. Participants must provide their own welding safety equipment and tools. Cost of NCCER Welding Safety Trainee Guide is included in the course fee.
Basic Gas Metal Arc Welding – MIG (GMAW) $545
This 32-hour course introduces the basic techniques used in Gas Metal Arc Welding – MIG Welding in the flat and horizontal positions.XWLD 502-B01 1/10-31 S 8 a.m.-4:30 p.m.
Basic Gas Tungsten Arc Welding – TIG (GTAW) $545
This course introduces the basic principles of Gas Tungsten Arc – TIG Welding in the flat and horizontal positions.XWLD 503-B01 1/10-31 S 8 a.m.-4:30 p.m.
Basic Shielded Metal Arc Welding – STICK (SMAW) $545
This 32-hour course introduces the basic principles of SMAW – Stick Welding in the flat and horizontal positions.XWLD 501-B01 1/10-31 S 8 a.m.-4:30 p.m.
Trident Technical College does not discriminate in admission or employment on the basis of race, gender, color, national or ethnic origin, age, religion, disability, marital status, veteran status, sexual orientation, gender identity or pregnancy.
Produced and printed by Trident Technical College. 11/14
To register for classes,call 843.574.6152 or visitwww.tridenttech.edu/ce.
Trident Technical CollegeBerkeley Campus
1001 S. Live Oak Dr. (Highway 17-A),Moncks Corner, SC 29461
Phone: 843.899.8000
Berkeley Campus
www.tridenttech.edu/ce
ENHANCEEQUIP
EXPLORE
Continuing Education
Berkeley Campus
1001 S. Live Oak Dr.(Highway 17-A)
Moncks Corner, 29461843.899.8000
Continuing EducationCourse ScheduleDecember 2014-April 2015
