Tspl p143 Dts 701 01 Sepl Spproved

7/28/2019 Tspl p143 Dts 701 01 Sepl Spproved

1/4

M.N.DASTUR AND COMPANY (P) LIMITED, CHENNAI

S.NO DESCRIPTIONTSPL DRAWING

NOSTATUS COMMENTS

1. TSPL to indicate the rating and type of pipe

for the carbon steel pipes indicated in Serial N

A

2. TSPL to indicate the Outer Diameter (OD) o

all the pipes.

3. TSPL to recheck and revise the MOC of the

Flange (SO/Blind) indicated in the datasheet f

the carbon steel pipes in the cooling water

system.

4. TSPL to note that the standard IS: 2712 GR

W/3 shall be followed for the Gaskets and sha

indicate the type of the gasket considered.

5. TSPL shall follow a common drilling standa

throughout the plant piping in their scope.

6. TSPL to note that the flanges (SO/Blind) for

the SS pipes shall conform to ASTM A 240 TP

316.

7. TSPL to note that the fasteners for the SS 3

pipes shall be SS 316 only.

8. TSPL to indicate the type of internal

protective coating to be provided for the pipes

carrying sea water.

9. TSPL to note that the pipes above DN 450

shall be spirally welded as per the specificatio

COMMENTS ON THE PIPING SPECIFICATIONS and COMPLIANCE SUBMITTED B

TSPL-P143-DTS-

701 Rev. 0

COMMENTS ASNOTED

1DATASHEET FOR PIPES

AND FITTINGS

(METALLIC)

1


2/4

04.02.10 1 SITESH NC USY

22.12.09 0 SITESH NC USY

Date Rev. Prepared Checked Approved

STATUS :

UNITS :

SCALE : NTS SHEET 01 OF 03 REV.

RESUBMISSION FOR APPROVAL

1

THERMOSYSTEMS PVT. LTD.

HYDERABAD

DATA SHEET OF PIPES AND FITTINGS (METALLIC)

TSPL-P143-DTS-701DRG NO:

VENDOR/

SUPPLIER :

FILE NO :TITLE :

M.N.DASTUR & COMPANY (P) LIMITED, KOLKATA

MADHUCON PROJECTS LIMITEDROAD NO.36, JUBILEE HILLS, HYDERABAD - 500 033, AP - INDIA

SUBMISSION

SUBMISSION FOR APPROVAL

2 X 135MW THERMAL POWER PLANT (PHASE -1)TAMMINAPATNAM & MUMMIDI VILLAGES, CHILLAKUR MANDAL

SPSR NELLORE DISTRICT - 524121, ANDHRA PRADESH - INDIA

SIMHAPURI ENERGY PRIVATE LIMITEDMADHUCON GREENLANDS, BEGUMPET, HYDERABAD - 500 016, AP- INDIA

DEVELOPMENT CONSULTANTS PRIVATE LIMITED, KOLKATA

ORIGINATOR :

EPC ENGINEER

PROJECT :

OWNER :

OWNER

ENGINEER :

EPC

CONTRACTOR :


3/4

THERMOSYSTEMS PVT.LTD. HYDERABAD

Title : DATA SHEET OF PIPES AND FITTINGS (METALLIC)

Project : 2 X 135MW THERMAL POWER PLANT PHASE-I Package: Low Pressure Piping System

Owner : SIMAHPURI ENERGY PVT. LTD. TSPL Doc. No. TSPL-P143-DTS-701

Rev.-01 Schedule Date Sheet No.EPC Contractor: MADHUCON PROJECT LIMTED04.02.10 2 of 3

S. No. SYSTEM

A 1. COOLING WATER SYSTEM (CW)2. AUXILIARY COOLING WATER SYSTEM (ACW)

MATERIAL Material Standard DimensionsStandard

O/D X Thickness(mm)

A.1 Pipes

A.1a 80 NB to 150 NB MS ERW Pipe to IS:1239(Part-I )

IS:1239 Part-I,BE

Heavy

A.1b

A.1c

200 NB to 450 NB

500NB to 2200NB

MS ERW Pipe to IS:3589, Fe410

MS spiral weld pipe Fe 410

IS:3589, BE

IS:3589, BE

219.1 x 6.3406.4 x 8.8

610.0 x 10711.0 x 10914.0 x 101422.0 x 12.51626.0 x 16

2235.0 x 20

A.2 FITTINGS

A.2.1 Elbows

A.2.1a 80 NB to 150 NB IS: 1239 PART II IS: 1239 PART II, R=1.5D

Heavy

A.2.1b 200 NB to 2200NB Fabricated from Parent Pipes ANSI B 16.9, BW/ AWWA C 208R =D / 1.5D

Same as parentpipe

A.2.2 Tees & Reducers

A.2.2a 80 NB to 150 NB IS: 1239 PART II IS: 1239 PART II

Heavy

A.2.2.2 200 NB to 2200NB Fabricated from Parent Pipes - Branches -

A3.1 Flange (SO / Blind)A.3.1a

A.3.1ab

15 NB to 600NB

650 NB to 2200NB

Fab. From MS: plate toIS: 2062

Fab. From MS: plate toIS: 2062

Dimns as perANSI B 16.5,

Dimns as perIS:6392

#150

PN 0.6

A.4.1 Gasket

A.4.1a 15 NB to 600NB CAF to IS :2712, Gr.W/3 ANSI B16.21 3 mm

A.5.1 Nuts, Bolts & Washer

A.5.1a All size Galvanised IS : 1367 Cl. 4/6

Sl. No. SYSTEM

B.0 1. CHILLED WATER SYSTEM (CHW)


O/D - Thickness(mm)

B.1 Pipes

B.1a Up to 150 NB ERW, Black confirming toIS:1239 Part-1

IS:1239 Part-1,BE

Heavy

B.1b 200NB to 300NB ERW, Black confirming toIS:3589

IS : 3589 BE 219.1 x 6.3323.9 x 6.3


4/4

THERMOSYSTEMS PVT.LTD. HYDERABAD

Title : DATA SHEET OF PIPES AND FITTINGS (METALLIC)

Project : 2 X 135MW THERMAL POWER PLANT PHASE-I Package: Low Pressure Piping System

Owner : SIMAHPURI ENERGY PVT. LTD. TSPL Doc. No. TSPL-P143-DTS-701

Rev.-01 Schedule Date Sheet No.EPC Contractor: MADHUCON PROJECT LIMTED04.02.10 3 of 3

B.2 FITTINGS

B.2.1 Elbows, Reducers &Tees

B.2.1a Up to 150 NB IS: 1239 PART II IS: 1239 PART

II, R=1.5D

Heavy

B.2.1b 200NB 300 NB Fabricated from parent pipe /branching

ANSI B 16.9,BWR=1.5D

Same as parentpipe

B.3 Flange

B.3.1a All Sizes Fab. From IS:2062 plate ANSI B16.5 #150B.4 Gasket

B.4.1a All Gasket CAF to IS : 2712 Gr. W/3 ANSI B16.21 3 mm

B.5 Nut, Bolt &Washer

Galvanized IS: 1367

Sl. No. SYSTEM

C INSTRUMENT AIR (IA) / SERVICE AIR (SA)

MATERIAL Material Standard DimensionsStandard Size x Thickness(mm)

C.1 Pipes

C.1.1 Up to 150 NB MS ERW Pipe to IS: 1239(Part-I), Galv. To IS:4736

IS:1239 partI,Scrd. End

Heavy

C.2 FITTINGS

C.2.1 Elbows, Tees & ReducersC.2.1.1 Up to 150 NB Malleable Cast Iron Fitting to

IS 1879, Scrd. End.IS 1879 Heavy

Sl. No. SYSTEM

D.0 1. CIRCULATION COOLING WATER (CCCW)2. DM WATER SYSTEM (DMW)


O/D x Thickness(mm)

D.1 Pipes

D1.1a 50NB to 300 NB SS ERW Pipe to ASTM-A-312,TP 316,

ANSI B16.19, PE 60.33 x 2.7788.9 x 3.05114.3 x 3.05168.28 x 3.40219.1 x 3.76273.1 x 4.19323.9 x 4.57

D.2 FITTINGS

D.2.1 Elbows, Reducers &Tees

D.2.1a Up to 50NB SS to ASTM A 182 Gr. 304 ANSI B16.11,SW

#3000

D.2.1b 65 NB to 300NB SS to ASTM A 403 TP304, ERW ANSI B 16.9, BW Sch. 10

D.3 Flange

D.3.1a All Flange SS to ASTM A 240 TP 316 ANSI B16.5,FF #150

D.4 Gasket

D.4.1a All Gasket CAF to IS:2712 Gr. W/3 ANSI B16.21 3mm thk.

D.5 NUT,BOLT&WASHER

SS 316 IS:1367 -

Note: Pipe thickness specified above are subject to tolerance as per IS / Standard

Tspl p143 Dts 701 01 Sepl Spproved

Documents

Transcript of Tspl p143 Dts 701 01 Sepl Spproved