TSE TSE-NVG-AE · • The TSE Phantom III (I²) Night Vision Scope was designed specifically for...
Transcript of TSE TSE-NVG-AE · • The TSE Phantom III (I²) Night Vision Scope was designed specifically for...
• The TSE Phantom III (I²) Night Vision Scope was designed specifically for tactical surveillance and reconnaissance work.
• The Phantom III uses the same Gen III intensifier tube as the PVS-14, with a housing machined out of billet aluminum.
• The objective lens is standard C-Mount, allowing the user to easily change out lenses to meet mission requirements.
• The Phantom III includes a 37mm threaded camera adapter allows easy attachment of virtually any camcorder or point & shoot camera while also allowing back focus adjustment.
• The optional 37mm Relay Lens allows any C or CS mount camera to be used with the Phantom III.
• This rugged scope is water resistant and operates about 40 hours on two AA batteries.
Phantom III Night Vision Scope
• Gen III Omni IV • Operates on two AA batteries • Water & corrosion resistant
• Extremely durable • Supports all C-mount lenses • Exportable Versions Available
TSE-NVG-AE TSE Tactical Support Equipment www.tserecon.com
Features
GS-03F-0035S
For more information, contact [email protected]
Tactical Support Equipment Phone: 800.889.4030 4039 Barefoot Road Phone: 910.425.3360 Fayetteville, NC 28306 Secure: 910.426.3369 www.tserecon.com Fax: 910.425.3361 Specifications subject to change without notice, the information in this document does not form part of any contract or quote.
Part #: TSE-NVG-AE
• All C Mount Manual Surveillance Lenses • DSLR Lenses With C Mount Adapters • All Commercial Catadioptric (mirror) Lenses (w/ custom adapters) • All Custom Catadioptric (mirror) Lenses (w/ custom adapters) • All Commercial & Military Spotting Scopes • Numerous Commercial Digital Cameras • Numerous Commercial Camcorders
Specifications
• Size: 1.75”W x 2.77H” x 5.15”D • Weight: 15.5 Oz • Supply Voltage: 3 VDC • Battery Life: 40 Hours Typical • Operating Temperatures: -10 to +50 C • Composition: Black Anodized Aluminum • Gain Adjustment: Automatic With Bright Source Protection • Intensified Tube: Gen III Omni IV • Resolution: 64 Lines Per Millimeter • Intensified Tube Life: 10,000 Hours Typical • Diopter Adjustment: -6 to +2 Diopter • Eye Relief: 25mm (min.) • Front Lens: 25mm F1.4 Macro • F-Stop Range: F1.4 to F16 • Rear Lens Mount: Supports all C-mount Lenses • Field Of View: 40º • Mount: 20 x ¼ Tripod Mount • Basic Kit: Phantom III Scope, Rubber Eyecup, 25mm C Mount Lens, 37mm Adapter, Lens Cap
Equipment & Lens Compatibility
Available on GSA Schedule GS-03F-0035S For more information, contact [email protected]
910-425-3360
Mechanical
• (Left) 37mm Adapter) Part # TSE-ADP-37MM
• (Right) Optional CCD Adapter Part # TSE-ADP-CCD
Phantom Scope with Digital Camera and spotting Scope
Phantom Scope with CCD Camera and 200mm Lens