I N T E R N AT I O N A L W E B I N A R “S p o r ts S c i e ...
TS Line Shredders at a glance · 2020. 11. 27. · 310 ts af 310 ts e n e r g y s m a r t e n v i r...
Transcript of TS Line Shredders at a glance · 2020. 11. 27. · 310 ts af 310 ts e n e r g y s m a r t e n v i r...
-
MADE IN ITALY
www.elcoman.it
TS Line Shreddersat a glance
TECHNICAL DATA 2019
-
Kobra 260 TS
Kobra 270 TS
Kobra 310 TS-AF
Kobra 310 TS
Kobra 410 TS
Kobra 245 TS
Kobra 430 TS
Kobra 310 TS HD
TS LINETechnology and Innovation
The highest shredding and security performances with the widest choice ever of shredding solutions
TWO SEPARATE SETS OF CUTTING KNIVESTwo separate sets of cutting knives for the separate insertion and shredding of paper and plastic. Available for CD shredding 3,2x50mm or for High Security CD shredding HS 1,5x2,5 mm (see model specifications).
EPC - Electronic Power ControlShows the shredding load required to optimise shredding without jams (Kobra 270, 310, 410TS series)
METAL DETECTION SYSTEMStops the machine when large metal objects, which could cause a damage to the cutting knives, are accidentally inserted.
AUTOMATIC OILERKobra TS cross-cut and High Security shredders can be equipped with an integrated automatic oiler, which activates a light signal when the oil bottle is low. This system eliminates the need of manual oiling of cutting knives.
AUTOMATIC REVERSE SYSTEMComes on when too much material is inserted into the shredder and puts the machine into automatic reverse mode.
AUTOMATIC FEEDERJust insert the documents to shred into the automatic feeder and it will shred automatically each document and turn into its stand-by position when shredding is completed (Kobra 310 TS series).
24 HOUR CONTINUOUS DUTY MOTOR24 hour continuous duty motor, without overheating.
CHAIN DRIVESUPER POTENTIAL POWER SYSTEMMaximum strength and wear resistance guaranteed by steel gears and chain drive system.
ENERGY SMART®Stand-by power saving mode after 8 seconds of no use. Automatic disconnection from power supply after 4 hours of non operation.
TOUCH SCREEN PANELAll controls are activated by simply touching the panel. Shreds transparent material by keeping the finger on the Forward control for 5 seconds.
TWO
SEPA
RA
TE SETS OF CUTTING KNIVES
AUTO
MA
TIC OILING SYSTEM
MET
AL DE
TECTION SYSTEM
SHRED GUARD
SUPE
R POT
ENTIAL POWER SYSTEM
AUTO-FEEDER
AUTO
MATIC REVERSE
100% JAM PROOF
24 H
OUR C
ONTINUOUS DUTY MOTOR
NO OVERHEATING
EN
ERGY SMART
ENVIRONMENTALLY F
RIEND
LY
TOUC
H SCREEN PANEL
ELEC
TRON
IC POWER CONTROL
EPCSHREDDING LOAD LEV
EL
-
310 TS AF310 TS
EN
ERGY SMART
ENVIRONMENTALLY F
RIEND
LY
UNI EN ISO 9001:2015 Cert. No.9105 EL16
ISO 9000 REGISTERED QUALITY COMPANY
Kobra 245 TSS4-SF S4 S5 C2 C4
245
3,8 3,8 5,8 1,9x15 3,9x40
14/16 25/27 27/29 11/13 21/23
11/13 20/22 22/24 9/11 16/18
P-2 P-5 P-4
T-2 T-2 T-2 T-5 T-4
E-2 E-2 E-2 E-4 E-3
O-2 O-2 O-3
T-2 T-2
F-2 F-1
40
0,15 0,07
59 55
230
460
23 24 27
(E)
Optional
Optional
40 x 36 x 61
Kobra 260 TS
S4 S5 C2 C4
260
3,8 5,8 1,9x15 3,9x40
26/28 28/30 12/14 22/24
21/23 23/25 10/12 17/19
P-2 P-5 P-4
T-2 T-2 T-5 T-4
E-2 E-2 E-4 E-3
O-2 O-2 O-3
T-2 T-2
F-2 F-1
60
0,05 0,07
55
230
460
29 32
(E)
Optional
Optional Standard (O-1 T-2 E-2)
40 x 36 x 80
Kobra 270 TS
S4 S5 C2 C4
270
3,8 5,8 1,9x15 3,9x40
27/29 30/32 12/14 23/25
22/24 24/26 10/12 18/20
P-2 P-5 P-4
T-2 T-2 T-5 T-4
E-2 E-2 E-4 E-3
O-2 O-2 O-3
T-2 T-2
F-2 F-1
110
0,06 0,07 0,06 0,07
55
230
460
45 46
(E)
Optional
Optional Standard (O-1 T-2 E-2)
53 x 43 x 88
Kobra 310 TS
SS4 SS5 CC2 CC4
310
3,8 5,8 1,9x15 3,9x40
37/39 45/47 17/19 29/31
31/33 37/39 14/16 25/27
P-2 P-5 P-4
T-2 T-2 T-5 T-4
E-2 E-2 E-4 E-3
O-2 O-2 O-3
T-2 T-2 T-4
F-2 F-1
135
0,08 0,07
58
230
920 (2x460)
56 54/57
(E)
Optional
AF - Optional
LK - Optional
Optional ***Optional Standard (O-1 T-2 E-2)
53 x 43 x 96 / 103 (auto-feeder)
Kobra 310 TS HD
C2 C4
310
1,9x15 3,9x40
30/32 54/56
27/29 48/50
P-5 P-4
T-5 T-4
E-4 E-3
O-4 O-3
T-5 T-4
F-2 F-1
E-4 E-3
135
0,1
63
230
2600
88
(E)
Standard
Optional
53 x 43 x 96
Kobra 410 TS
S5 C2 C4
410
5,8 1,9x15 3,9x40
68/72 30/32 54/56
60/64 27/29 48/50
P-2 P-5 P-4
T-2 T-5 T-4
E-2 E-4 E-3
O-2 O-4 O-3
T-2 T-5 T-4
F-2 F-1
E-2 E-4 E-3
205
0,1
63
230
2600
105 112
(E)
Standard
Optional Optional (O-3 T-4 E-3)
60 x 48 x 104
Kobra 430 TS
C2 C4
430
1,9x15 5,8x50
60/65 125/130
50/55 100/105
P-5 P-3
T-5 T-3
E-4 E-2
O-4 O-2
T-5 T-3
E-4 E-2
470
0,21
60
380-415
4000
480
Standard
81 x 161 x 170
TS LINE
MODEL
Throat width (mm)
Shred size (mm)
Sheet capacity* (A4/70g)
Sheet capacity* (A4/80g)
Security Level ISO/IEC 21964 (DIN 66399)
Shreddable Material
Credit card
Smart card
CD/DVD/BluRayDisc
Floppy disk
Microfilm/Foil
Memory stick
Main Features
Waste bin or bag volume (L) / Waste bag
Speed** (m/s)
Noise level (dba)
Voltage (V50/60Hz)
Power (Watt)
Weight standard/with auto-feeder (Kg)
Technological Equipments
ENERGY SMART® System
24 Hour continuous duty motor / Motor thermal protection
Super Potential Power System
Automatic Start & Stop Electronic eyes (E) • Sensor (S)
EPC – Electronic Power Control
Safety Stop with light signal for open door/bin out
Safety Stop with light signal for bag or bin full
Automatic Reverse System
Optionals Available
AO - Automatic Oiler
AF - Automatic Feeder
LK - Lockable Cover
MD - Metal Detection (Shred Guard)
CD - CDs/DVDs Cutting Unit
Dimensions
Width x Depth x Height/with auto-feeder (cm)
ENERGY SMART® Management System for power saving stand-by mode
deskside shredderssecurity levels p-2/p-4/p-5
medium office shredderssecurity levels p-2/p-4/p-5
medium/large office shredderssecurity levels p-2/p-4/p-5
heavy duty shredderssecurity levels p-2/p-4/p-5
industrialshredders
shredders are built according to CE standard and carry the most International recognized safety marks
***Metal detector system available on all models without Auto-Feeder
and ENERGY SMART®
are registered trademarks
Legenda ISO/IEC 21964 (DIN 66399) Paper...............................P
CD / DVD........................OFloppy disk....................TCredit card....................T
Smart card................... EUSB................................. EFilm................................. F
Straight-cut models S4 I S5
Cross-cut modelsC2 I C4
*Capacity varies on supply power, weight, quality and grain of paper, operating temperature and blade lubrication**Speed calculated at 60 Hz as knife outside diameter x rpm
-
EN
ERGY SMART
ENVIRONMENTALLY F
RIEND
LY
www.elcoman.it
UNI EN ISO 9001:2015 Cert. No.9105 EL16
ISO 9000 REGISTERED QUALITY COMPANY
Kobra 245 TS Kobra 260 TS Kobra 270 TS Kobra 310 TS Kobra 310 TS HD Kobra 410 TS
HS HS-6 HS HS-6 HS HS-6 HS S-6 HS HS-6 HS HS-6
245 260 270 310 310 410
0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 1x5 0,8x9,5 1x5
6/8 4/5 6/8 4/5 8/10 4/5 11/13 5/6 20/22 12 20/22 12
5/6 3/4 5/6 3/4 7/8 3/4 10/11 4/5 18/20 10 18/20 10
P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7
T-6 T-6 T-6 T-6 T-6 T-6
E-5
O-5
F-3 F-3 F-3 F-3 F-3 F-3
40 60 110 135 205
0,08 0,08 0,07 0,08 0,08 0,1 0,1
55 58 63
230 230
460 920 (2x460) 2600
29 33 50 57/59 91 128
(E)
Optional Standard
AF - Optional
LK - Optional
Optional ***Optional OptionalCD - Optional (O-1 T-2 E-2) CD - Optional 1,5x2 mm (O-6 T-6 E-5)
40 53 60
36 43 48
61 80 88 96/103 96 104
TS LINE
HIGH SECURITY MODEL
Throat width (mm)
Shred size (mm)
Sheet capacity* (A4/70g)
Sheet capacity* (A4/80g)
Security Level ISO/IEC 21964 (DIN 66399)
Shreddable Material
Credit card
Smart card
CD/DVD/BluRayDisc
Floppy disk
Microfilm/Foil
Memory stick
Main Features
Waste bin/bag volume (L) / Waste bag
Speed** (m/s)
Noise level (dba)
Voltage (V50/60Hz)
Power (Watt)
Weight standard/with auto-feeder (Kg)
Technological Equipments
ENERGY SMART® System
24 Hour continuous duty motor / Motor thermal protection
Super Potential Power System
Automatic Start & Stop Electronic eyes (E) • Sensor (S)
EPC – System wydajności niszczenia
Safety Stop with light signal for open door/bin out
Safety Stop with light signal for bag or bin full
Automatic Reverse System
Optionals Available
AO - Automatic Oiler
AF - Automatic Feeder
LK - Lockable Cover
MD - Metal Detection (Shred Guard)
CD - CDs/DVDs Cutting Unit
Dimensions
Width (cm)
Depth (cm)
Height (cm)
ENERGY SMART® Management System for power saving stand-by mode
shredders are built according to CE standard and carry the most International recognized safety marks
and ENERGY SMART®
are registered trademarks
*Capacity varies on supply power, weight, quality and grain of paper, operating temperature and blade lubrication**Speed calculated at 60 Hz as knife outside diameter x rpm***Metal detector system available on all models without Auto-Feeder
High Security modelsHS I HS-6
high securityshredderssecurity levels p-6/p-7
ISO/IEC 21964 (DIN 66399) Security Levels & Data Carrier Classification
Data in Original Size on: Paper, Printout, films, printing plates etc.
PP-1 Stripe width max 12 mmP-2 Stripe width max 6 mm
P-3 Cross Cut < 320 mm2
P-4 Cross Cut < 160 mm2
P-5 Cross Cut < 30 mm2
P-6 Cross Cut < 10 mm2
P-7 Cross Cut < 5 mm2
Data on Optical Carriers: CDs, DVDs etc.
0O-1 Cross Cut < 2000 mm2O-2 Cross Cut < 800 mm2
O-3 Cross Cut < 160 mm2
O-4 Cross Cut < 30 mm2
O-5 Cross Cut < 10 mm2
O-6 Cross Cut < 5 mm2
O-7 Cross Cut < 0,2 mm2
Data on Magnetic Carriers: Credit Cards, Floppy Disks, ID Cards, Magnetic Tape Cassettes, etc.
TT-1 Mechanically inoperableT-2 Cross Cut < 2000 mm2
T-3 Cross Cut < 320 mm2
T-4 Cross Cut < 160 mm2
T-5 Cross Cut < 30 mm2
T-6 Cross Cut < 10 mm2
T-7 Cross Cut < 2,5 mm2
Data on electronic data carriers: Memory Sticks, Chip cards, Semiconductor Hard Drives, mobile communication media, etc.
EE-1 Mechanically/Electroni- cally inoperableE-2 Split
E-3 Cross Cut < 160 mm2
E-4 Cross Cut < 30 mm2
E-5 Cross Cut < 10 mm2
E-6 Cross Cut < 1 mm2
E-7 Cross Cut < 0,5 mm2
Reduced size data on: micro-films and foils
FF-1 Cross Cut < 160 mm2F-2 Cross Cut < 30 mm2
F-3 Cross Cut < 10 mm2
F-4 Cross Cut < 2,5 mm2
F-5 Cross Cut < 1 mm2
F-6 Cross Cut < 0,5 mm2 F-7 Cross Cut < 0,2 mm2
Data on Hard Disks (with magnetic data carriers)
HH-1 Mechanically/Electroni- cally inoperableH-2 Damaged
H-3 DeformedH-4 Cross Cut < 2000 mm2
H-5 Cross Cut < 320 mm2
H-6 Cross Cut < 10 mm2
H-7 Cross Cut < 5 mm2
-
Via Gorizia, 920813 Bovisio Masciago (MB), ItalyTel +39 0362 593584Fax +39 0362 [email protected]
UNI EN ISO 9001:2015 Cert. No.9105 EL16
ISO 9000 REGISTERED QUALITY COMPANY
CT-
156
/ 11
/ 3
1.07
.201
9
shredders are built with the highest quality materials according to ISO 9001:2015 standards.
Authorized Dealer
Technical Data as of 07/2019. Specifications in this publication may be subject to change without notice.