E-Plas P/L Authorised Distributors of QuickSilver ®

Truck Lining Systems

QuickSilver's® unique design formula is engineered to be super slick! Phenomenal release properties eliminate carry-back. No additional release agents required. Most materials are completely out of the trailer by the third ram stage.

Handling bulk loads with ease. Scolding hot asphalt or frozen snow. Sticky as treacle or abrasive as stone. Wet, dry or rough.No worries, QuickSilver® liner will take it. Dependable and tough. It will never let you down.

QuickSilver® is the perfect performer in all climates and environments: hot, humid, wet, dry, or freezing.

QuickSilver® weighs less than both steel and aluminum and is highly abrasion resistant. Impact and corrosion resistance protects the integrity of the original equipment. Superior wear resistance equals more loads per day, all year round.

QuickSilver® is super safe. Remove the risk of sticking and tip-overs, whilst greatly reducing wear and tear on your truck's brakes and hydraulics. Your trucks are safer, tougher, incredibly durable and truly productive. Drivers will haul with total confidence. More loads per day with fewer problems equals more money in your pocket.

QuickSilver® can be fitted in less than one day and requires no on-going maintenance. Breathe new life into worn equipment! Reduce replacement costs. Dramatic cost savings can be achieved.

This material is state of the art. Made from ultra high molecular weight polyethylene (UHMW-PE), a phenomenal industrial strength plastic; it outwears steel and aluminum protecting your investment and making it last longer.

QuickSilver® features 4 year non prorated manufacturer warranty with the best technical support, manufactured by Quadrant, the world's largest producer of UHMW-PE.

E-Plas P/L, are authorized distributors of this ground breaking lining material.

Any configuration from dump trailers and bottom dumps to gravel trains and transfer trailers.

QuickSilver® Truck Lining Systems - The Best Product For The Job

QuickSilver® The liner that works for a living

Before After

Hot AsphaltHot Asphalt

ClayClay

SludgeSludge

SnowSnow

LimestoneLimestone

GravelGravel

CoalCoal

SaltSalt

PhosphatePhosphate TopsoilTopsoil

SandSand

Fly AshFly Ash

Ore ConcentrateOre Concentrate

Diversify Your Load Capability With QuickSilver®

QuickSilver's® unique formula creates a surface second to none. It’s diverse capabilities allow you to haul and tip a vast range of materials. You can haul gravel one load and bitumen the next with hardly any turn-around between loads thanks to the liner’s self-cleaning qualities.

R Superior Toughness And Durability

RFast, Easy Installation - Any Configuration

R Super Slick Release - Eliminate Sticking Loads

RDesigned To Dump Clean - No Carry-back

R Lighter Than Aluminium And Steel

RHuge Maintenance Reduction

RManufacturer Warranty And Technical Support

R Haul And Tip Any Material With Ease

R Increased Safety Truck and Driver

R No release additives. Release Agents In Liner

R Any Climate Or Environment

R Premium Abrasion Resistance

R Great long term investment and savings

RProduct designed and engineered to do the job

What Makes QuickSilver® The Best Product For The Job

QuickSilver® Durapro® Aluminium Carbon Steel HD-PEHMW-PE

QuickSilver® Truck Lining Systems - Always The Best Investment

Field Wear Performance

QuickSilver®

Durapro®

Carbon Steel

Aluminium

HMW-PE

HD-PE

0 1 2 3 4 5 6 7 8 9 10

Weight Comparison

Lb

s. /

Squa

re f

eet

Gauge6mm (1/4")

12.7mm9.5mm( 3/8") ( 1/2")

0

5

15

20

25

10

E-Plas P/L Authorised Distributors of QuickSilver®

QuickSilver® Range

QuickSilver Coil

Thicknesses: 6mm (1/4"), 9.5mm (3/8"), 12.7mm (1/2") Widths: 1220mm (48"), 2440mm (96"), 3050mm (120"), 3658mm (144")Length: 31m (101.7'), 61m (200.13')

QuickSilver Sheet

Thicknesses: 6mm (1/4"), 9.5mm (3/8"), 12.7mm (1/2"), 19.05mm (3/4"0Width: 1220mm (48") Length: 3050 (120")

QuickSilver Accessories

2440mm (8') aluminium leading edge protector (3/8" offset)2440mm (8') aluminium leading edge protector (½" offset)

2440mm (8') steel leading edge protector (3/8" offset)2440mm (8') steel leading edge protector (½" offset)

Grey 4mm (5/32") diameter welding rod (approx. 14 kg's(30 lbs)Grey 3.2mm (1/8") diameter welding rod (approx. 14 kg's(30 lbs)

Weld washer counter bore toolWeld washer counter bore drill bitQS grey weld washer plug for 3/8" linerQS grey weld washer plug for ½" liner

Floor S.S. bolt package ( x 15)S.S. cupped fender washerBulkhead & hoist pedestal bolt pkg. (x 30)5/16" - 18 x 1-1/2" Torx drive, steel, self-tapping screw

®

®

®

d

d

d

d

d

d

d

d

d

INDUSTRIAL &

ENGINEERING

PLASTICS

SPECIALISTS IN

Disclaimer: All statements, technical information and recommendations in this publication are presented in good faith and based upon informationprovided by tests believed to be reliable and upon practical field experience of Quadrant Engineering Plastic Products. The reader of the information contained within is however cautioned that

Quadrant Engineering Plastic Products according to Quadrant Engineering Plastic Products and

E-Plas P/L do not guarantee the absolute accuracy of information herein and it remains at all times, the customer’s responsibility to independently determine the ultimate suitability of the product in any given application. This guide was created by E-Plas P/L using information supplied and copyright images with permission of Quadrant Engineering Plastic Products.

E-PLAS VIC. - 25 Ovata Drive, Tullamarine 3043 Ph: 03 9335 2200 Fax: 03 9335 2885 Email: sales@eplas.com.au

E-PLAS QLD. - 17 Darnick St., Underwood 4119 Ph: 07 3341 6400 Fax: 07 3341 6433 Email: brisbane@eplas.com.au

E-PLAS N.S.W - 1/87 Station Rd., Seven Hills 2147 Ph: 02 9620 5144 Fax: 02 9620 5155 Email: sydney@eplas.com.au

E- PLAS S.A - Unit 2/62 Pym St., Dudley Park 5088 Ph: 08 8390 0996 Fax: 08 8340 0998 Email: adelaide@eplas.com.au

E-PLAS W.A. - 7 Brennan Way, Belmont 6104 Ph: 08 9479 5977 Fax: 08 9479 5944 Email: perth@eplas.com.au

b

b

b

b

For All QuickSilver Sales Enquiries Contact Authorised Distributor E-Plas P/L ®