Truck and Trailer S-Camshaft Quick Identification Guide

Truck and Trailer S-CamshaftQuick Identification GuideHeavy Duty Components

UHB800-CAM-IDJune 2002

2

CAMSHAFT QUICK IDENTIFICATION GUIDEUHB800-CAM-ID

CAUTION! The items in this catalog are listed for use only in theapplications and interchanges that appear in the catalog. Other use couldresult in property damage or serious personal injury. Always refer to thevehicle, trailer, or component manufacturer's service manual when performingvehicle maintenance.

NOTE: The data listed herein is correct to the best of our knowledge andbelief, having been compiled from reliable and official sources of information.However, we cannot assume any responsibility for possible errors.

If any errors are found, or you have suggestions on ways to improve futurecatalogs, we want to hear from you. Please complete the Catalog CommentForm in the back of this catalog. Thank you for your assistance.

3

CAMSHAFT QUICK IDENTIFICATION GUIDEUHB800-CAM-ID

These graphics are for identification purposes only. Dimensions in actual camshafts may vary slightly.

Diameterat Spline Diameter Spicer

Cam Head End & No. at Part Axle Brake BrakeLength Style of Splines Spider Number Side Type* Manufacturer Size Notes

*Axle Type: S = Steer, D = Drive, T = Trailer

4 7/8" A 1 1/2" - 10 1 1/2" 17-600 RH T Spicer 16 1/2" Spicer Custom Trunnion Suspension;17-601 LH 1 1/16" tip

5 3/32" A 1 1/2" - 10 1 1/2" 18-792 RH D Rockwell 16 1/2"18-793 LH

5 13/64" A 1 1/2" - 10 1 1/2" 18-992 RH S Rockwell 14 1/2" "W" Brake18-993 LH

5 3/8" A 1 1/2" - 10 1 1/2" 18-990 RH S Rockwell 14 1/2" "W" Brake18-991 LH


5 23/32" I 1 1/4" - 10 1 1/4" 18-910 RH S Wagner 15"18-911 LH

5 25/32" F 1 1/2" - 10 1 1/2" 18-840 RH S Rockwell 15" "T" Series Brake18-841 LH


6 1/4" A 1 1/2" - 10 1 1/2" 18-986 RH D Rockwell 14 1/2" "W" Brake18-987 LH

6 3/8" A 1 1/2" - 10 1 1/2" 18-800 RH D Rockwell 16 1/2"18-801 LH


How to use this Quick Identification Guide

1. Measure camshaft length. Measure from under the cam head to the beginning of the lock ring groove.

2. Locate camshaft length in the Camshaft Quick Identification Guide. Camshafts are listed in order of length, from shortest tolongest.

3. After finding camshafts in the Cam Length column, determine camshaft head style, using the Head Styles chart and head widthdimensions.

4. Narrow your final selection by Diameter at Spline End and Number of Splines, Diameter at Spider and any other information listed.

4

CAMSHAFT QUICK IDENTIFICATION GUIDE





UHB800-CAM-ID

6 15/16" B 1 1/2" - 28 1 1/2" 18-670 RH D Spicer 16 1/2" "XL" and “XLII” Brakes; 5", 6" and 7" Brakes18-671 LH

7 1/8" G 1 1/4" - 24 1 1/4" 18-902 RH S Rockwell 15" “Q” Brake; 2" Offset Backing Plate18-903 LH




7 5/8" I 1 1/4" - 10 1 1/4" 18-760 RH S Eaton 15" Single Anchor Pin (SAP)18-761 LH

7 5/8" J 1 1/4" - 10 1 1/4" 18-960 RH S Eaton 15" Extended Service Brake (ES™); Single Anchor18-961 LH Pin (SAP)

7 21/32" F 1 1/4" - 10 1 1/4" 18-1129 LH S Rockwell 15" "T" Series Brake18-1130 RH

7 21/32" G 1 1/4" - 10 1 1/4" 18-954 RH S Rockwell 15" "T" Series Brake; New Style S-Head18-955 LH

7 23/32" B 1 1/2" - 28 1 1/2" 18-500 RH D Rockwell 16 1/2" “Q Plus” Brake18-501 LH

7 23/32" A 1 1/2" - 28 1 1/2" 18-796 RH D Rockwell 16 1/2"18-797 LH


7 3/4" A 1 1/2" - 28 1 1/2" 18-640 RH D Spicer 16 1/2" 5", 6", and 7" Brakes18-641 LH

7 27/32" A 1 1/2" - 10 1 1/2" 18-988 RH D Rockwell 14 1/2" "W" Brake18-989 LH

7 7/8" A 1 1/2" - 10 1 1/2" 18-802 RH D Rockwell 16 1/2"18-803 LH

7 15/16" A 1 1/4" - 10 1 1/4" 18-620 RH S Spicer 15"18-621 LH

5





UHB800-CAM-ID



7 15/16" G 1 1/4" - 24 1 1/4" 18-890 RH S Rockwell 15" “Q” Brake; 1 1/2" Offset Backing Plate18-891 LH





8 1/16" A 1 1/2" - 10 1 1/2" 18-854 RH D Rockwell 16 1/2"18-855 LH

8 1/8" A 1 1/4" - 10 1 1/4" 18-622 RH S Spicer 15"18-623 LH

8 1/8" A 1 1/2" - 28 1 1/2" 18-642 RH D Spicer 16 1/2" 5", 6" and 7" Brakes18-643 LH

8 1/8" A 1 1/2" - 28 1 1/2" 18-860 RH D Rockwell 16 1/2"18-861 LH


8 3/16" A 1 1/2" - 10 1 1/2" 18-704 RH S Bendix 15" Brazilian Brake18-705 LH









8 17/32" A 1 1/2" - 28 1 1/2" 18-824 RH D Rockwell 16 1/2"18-825 LH



8 9/16" A 1 1/2" - 10 1 1/2" 18-726 RH D Eaton 16 1/2"18-727 LH

6






UHB800-CAM-ID


8 9/16" A 1 1/2" - 10 1 1/2" 18-804 RH D Rockwell 16 1/2"18-805 LH


8 5/8" A 1 1/4" - 10 1 1/4" 18-624 RH S Spicer 15"18-625 LH

8 5/8" B 1 1/2" - 10 1 1/2" 18-940 RH D Eaton 16 1/2" Extended Service Brake (ES™)18-941 LH


8 3/4" A 1 1/4" - 10 1 1/4" 18-626 RH S Spicer 15"18-627 LH



8 15/16" A 1 1/2" - 10 1 1/2" 18-728 RH D Eaton 16 1/2"18-729 LH



9 1/32" A 1 1/2" - 28 1 1/2" 18-646 RH D Spicer 16 1/2" 5", 6", and 7" Brakes18-647 LH

9 1/16" A 1 1/2" - 28 1 1/2" 18-850 RH D Rockwell 16 1/2"18-851 LH


9 3/32" A 1 1/2" - 10 1 1/2" 18-794 RH D Rockwell 16 1/2"18-795 LH

7





UHB800-CAM-ID




9 1/4" A 1 1/4" - 10 1 1/4" 18-628 RH S Spicer 15"18-629 LH

9 1/4" A 1 1/2" - 28 1 1/2" 18-862 RH D Rockwell 16 1/2"18-863 LH





9 5/16" H 1 1/2" - 28 1 1/2" 18-936 RH S Rockwell 15" “Q Plus” Brake; Dual Anchor Pin (DAP)18-937 LH


9 7/16" H 1 1/2" - 28 1 1/2" 18-938 RH S Rockwell 15" “Q Plus” Brake; Dual Anchor Pin (DAP)18-939 LH


9 31/64" A 1 1/2" - 10 1 1/2" 18-782 RH D Rockwell 16 1/2"18-783 LH

9 1/2" A 1 1/4" - 10 1 1/4" 18-630 RH S Spicer 15"18-631 LH

9 1/2" A 1 1/2" - 28 1 1/2" 18-864 RH D Rockwell 16 1/2"18-865 LH






9 3/4" A 1 1/2" - 28 1 1/2" 18-888 RH D Rockwell 16 1/2"18-889 LH


9 13/16" A 1 1/2" - 10 1 1/2" 18-730 RH D Eaton 16 1/2"18-731 LH


8






UHB800-CAM-ID





10 3/16" A 1 1/2" - 10 1 1/2" 18-732 RH D Eaton 16 1/2"18-733 LH


10 1/4" A 1 1/2" - 28 1 1/2" 18-710 RH D Rockwell 16 1/2"18-711 LH

10 1/4" A 1 1/2" - 10 1 1/2" 18-784 RH D Rockwell 16 1/2"18-785 LH





10 1/2" A 1 1/2" - 10 1 1/2" 18-734 RH D Eaton 16 1/2"18-735 LH

10 1/2" A 1 1/2" - 28 1 1/2" 18-826 RH D Rockwell 16 1/2"18-827 LH

10 9/16" A 1 1/2" - 10 1 1/2" 18-806 RH D Rockwell 16 1/2"18-807 LH


9





UHB800-CAM-ID

10 11/16" A 1 1/4" - 10 1 1/4" 18-634 RH S Spicer 15"18-635 LH

10 7/8" A 1 1/2" - 28 1 1/2" 18-828 RH D Rockwell 16 1/2"18-829 LH




11 3/32" A 1 1/2" - 28 1 1/2" 17-11055 LH T Intraax 16 1/2"17-11056 RH


11 1/8" A 1 1/2" - 10 1 1/2" 18-736 RH D Eaton 16 1/2"18-737 LH


11 1/8" A 1 1/2" - 28 1 1/2" 18-798 RH D Rockwell 16 1/2"18-799 LH




11 1/4" A 1 1/2" - 28 1 1/2" 18-830 RH D Rockwell 16 1/2"18-831 LH

11 9/32" A 1 1/2" - 10 1 1/2" 18-808 RH D Rockwell 16 1/2"18-809 LH


11 1/2" A 1 1/2" - 10 1 1/2" 18-738 RH D Eaton 16 1/2"18-739 LH

11 1/2" A 1 1/2" - 10 1 1/2" 18-810 RH D Rockwell 16 1/2"18-811 LH

11 1/2" A 1 1/2" - 28 1 1/2" 18-832 RH D Rockwell 16 1/2"18-833 LH



11 5/8" A 1 1/2" - 28 1 1/2" 18-866 RH D Rockwell 16 1/2"18-867 LH


11 3/4" A 1 1/2" - 10 1 1/2" 18-786 RH D Rockwell 16 1/2"18-787 LH


10






UHB800-CAM-ID


12 1/16" A 1 1/2" - 10 1 1/2" 18-852 RH D Rockwell 16 1/2"18-853 LH

12 1/8" A 1 1/2" - 10 1 1/2" 18-708 RH D Bendix 16 1/2" Brazilian Brake18-709 LH




12 7/16" A 1 1/2" - 10 1 1/2" 18-740 RH D Eaton 16 1/2"18-741 LH

12 1/2" A 1 1/2" - 10 1 1/2" 18-812 RH D Rockwell 16 1/2"18-813 LH

12 1/2" A 1 1/2" - 28 1 1/2" 18-868 RH D Rockwell 16 1/2"18-869 LH




12 15/16" A 1 1/2" - 28 1 1/2" 18-836 RH D Rockwell 16 1/2"18-837 LH

13" A 1 1/2" - 10 1 1/2" 18-748 RH D Eaton 16 1/2"18-749 LH

13" A 1 1/2" - 10 1 1/2" 18-814 RH D Rockwell 16 1/2"18-815 LH

13" B 1 1/2" - 10 1 1/2" 18-946 RH D Eaton 16 1/2" Extended Service Brake (ES™)18-947 LH

11





UHB800-CAM-ID


13 3/16" A 1 1/2" - 28 1 1/2" 18-820 RH D Rockwell 16 1/2"18-821 LH





13 7/16" A 1 1/2" - 10 1 1/2" 18-742 RH D Eaton 16 1/2"18-743 LH

13 7/16" A 1 1/2" - 28 1 1/2" 18-822 RH D Rockwell 16 1/2"18-823 LH

13 15/32" B 1 1/2" - 10 1 1/2" 18-994 RH D Eaton 16 1/2" & 18" Extended Service Brake (ES™)18-995 LH


13 21/32" A 1 1/2" - 10 1 1/2" 18-724 RH D Rockwell 16 1/2"18-725 LH

14 1/16" A 1 1/2" - 28 1 1/2" 18-834 RH D Rockwell 16 1/2"18-835 LH


14 1/8" A 1 1/2" - 10 1 1/2" 18-816 RH D Rockwell 16 1/2"18-817 LH

14 1/4" A 1 1/2" - 10 1 1/2" 18-746 RH D Eaton 16 1/2"18-747 LH



14 9/16" A 1 1/2" - 10 1 1/2" 18-754 RH D Eaton 16 1/2"18-755 LH


14 19/32" A 1 1/2" - 28 1 1/2" 18-780 RH D Rockwell 16 1/2"18-781 LH


14 7/8" A 1 1/2" - 10 1 1/2" 18-790 RH D Rockwell 16 1/2"18-791 LH

15" A 1 1/2" - 10 1 1/2" 18-744 RH D Eaton 16 1/2"18-745 LH

15" A 1 1/2" - 28 1 1/2" 18-878 RH D Rockwell 16 1/2"18-879 LH

15 1/16" B 1 1/2" - 10 1 1/2" 18-996 RH D Eaton 16 1/2" & 18" Extended Service Brake (ES™)18-997 LH

12






UHB800-CAM-ID


15 3/16" A 1 1/2" - 28 1 1/2" 18-712 RH D Rockwell 16 1/2"18-713 LH

15 1/4" B 1 1/2" - 10 1 1/2" 18-1127 LH D Eaton 16 1/2" & 18" Extended Service Brake (ES™)18-1128 RH

15 1/2" A 1 1/2" - 28 1 1/2" 18-714 RH D Rockwell 16 1/2"18-715 LH


15 5/8" A 1 1/2" - 10 1 1/2" 17-560 RH T Multi-App. 16 1/2"17-561 LH


15 23/32" A 1 1/2" - 28 1 1/2" 18-716 RH D Rockwell 16 1/2"18-717 LH

15 3/4" A 1 1/2" - 10 1 1/2" 18-818 RH D Rockwell 16 1/2"18-819 LH

15 7/8" A 1 1/2" - 10 1 1/2" 18-750 RH D Eaton 16 1/2"18-751 LH

16 1/8" E 1 1/2" - 28 1 5/8" 17-400 RH T Spicer 12 1/4" Axles Manufactured After February 1996;17-401 LH Double Groove

16 1/8" A 1 1/2" - 28 1 5/8" 17-614 RH T Fruehauf 16 1/2" “Pro-Par” Type Axle17-615 LH

16 1/8" A 1 19/32" - 37 1 5/8" 17-620 RH T Fruehauf 16 1/2" “Pro-Par” Type Axle17-621 LH

16 1/8" E 1 1/2" - 10 1 1/2" 17-734 RH T Spicer 12 1/4" Axles Manufactured After July 1994; Double17-735 LH Groove



13





UHB800-CAM-ID

16 3/16" D 1 19/32" - 37 1 5/8" 17-624 RH T Fruehauf 12 1/4" “Pro-Par” Type Axle17-625 LH

16 5/16" A 1 1/2" - 10 1 1/2" 17-570 RH T Multi-App. 16 1/2"17-571 LH

16 5/16" B 1 1/2" - 10 1 1/2" 17-540 RH T Spicer 16 1/2" "XL" Brake; Double Groove;17-541 LH

16 5/16" B 1 1/2" - 10 1 5/8" 17-840 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-841 LH "XL" Brake; Double Groove

16 3/8" E 1 1/2" - 28 1 1/2" 17-11057 LH T Dexter 12 1/4"17-11058 RH

16 1/2" B 1 1/2" - 28 1 1/2" 17-520 RH T Spicer 16 1/2" "XL" Brake17-521 LH

16 1/2" B 1 1/2" - 10 1 1/2" 17-542 RH T Spicer 16 1/2" "XL" Brake; Double Groove17-543 LH

16 1/2" A 1 1/2" - 10 1 1/2" 17-576 RH T Multi-App. 16 1/2"17-577 LH


16 1/2" B 1 1/2" - 28 1 5/8" 17-912 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-913 LH "XL" Brake



17 5/16" B 1 1/2" - 28 1 5/8" 17-720 RH T Rockwell 16 1/2" “Q Plus” Brake; Forged or Fabricated Spiders17-721 LH

17 3/8" A 1 1/2" - 28 1 1/2" 17-478 RH T Spicer 16 1/2"17-479 LH



17 3/8" A 1 1/2" - 10 1 1/2" 17-568 RH T Multi-App. 16 1/2" Double Groove17-569 LH

17 3/8" A 1 1/2" - 28 1 5/8" 17-626 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; Cast Spider17-627 LH


17 3/8" A 1 1/2" - 28 1 5/8" 17-656 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; Fabricated Spider17-657 LH


17 3/8" B 1 1/2" - 28 1 5/8" 17-810 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; “Q Plus” Brake;17-811 LH Cast Spider




14






UHB800-CAM-ID


17 3/4" A 1 1/2" - 10 1 1/2" 17-572 RH T Multi-App. 16 1/2"17-573 LH

17 3/4" B 1 1/2" - 10 1 5/8" 17-846 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-847 LH "XL" Brake; Double Groove;

18" E 1 1/2" - 28 1 5/8" 17-404 RH T Spicer 12 1/4" Axles Manufactured After February 1996;17-405 LH Double Groove

18" C 1 1/2" - 10 1 1/2" 17-678 RH T Spicer 12 1/4" Axles Manufactured Before August 1994;17-679 LH Double Groove

18" E 1 1/2" - 10 1 1/2" 17-740 RH T Spicer 12 1/4" Axles Manufactured After July 1994; Double17-741 LH Groove




18 3/8" A 1 1/2" - 10 1 1/2" 17-566 RH T Multi-App. 16 1/2"17-567 LH

18 3/8" B 1 1/2" - 10 1 5/8" 17-848 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-849 LH "XL"; Double Groove


18 5/8" A 1 1/2" - 10 1 1/2" 17-578 RH T Multi-App. 16 1/2"17-579 LH



18 7/8" C 1 1/2" - 10 1 1/2" 17-676 RH T Spicer 12 1/4" Axles Manufactured Before August 1994;17-677 LH Double Groove

15





UHB800-CAM-ID




19 3/8" B 1 1/2" - 10 1 5/8" 17-460 RH T Eaton 16 1/2" Extended Service Brake (ES™)17-461 LH



19 1/2" A 1 1/2" - 10 1 5/8" 17-634 RH T Eaton 16 1/2" 501 Series17-635 LH

19 1/2" A 1 1/2" - 10 1 1/2" 18-752 RH D Eaton 16 1/2" Air Lift Tag Axle18-753 LH





20 5/16" E 1 1/2" - 28 1 1/2" 17-11059 LH T Dexter 12 1/4"17-11060 RH

20 5/16" C 1 1/2" - 10 1 1/2" 17-682 RH T Eaton/ 12 1/4" Double Groove17-683 LH Shuler

20 5/16" E 1 1/2" - 28 1 5/8" 17-700 RH T Rockwell 12 1/4"17-701 LH

20 5/16" E 1 1/2" - 10 1 5/8" 17-714 RH T Rockwell 12 1/4"17-715 LH



20 3/8" A 1 1/2" - 10 1 1/2" 17-11071 LH T Eaton/ 16 1/2" Double Groove17-11072 RH Shuler


20 3/8" A 1 1/2" - 28 1 1/2" 17-480 RH T Spicer 16 1/2"17-481 LH




20 3/8" K 1 3/4" - 10 1 3/4" 17-670 RH T Spicer 20" Severe Duty; Cast Iron Shoe17-671 LH

16






UHB800-CAM-ID




20 7/16" B 1 1/2" - 28 1 5/8" 17-722 RH T Rockwell 16 1/2" “Q Plus” Brake; Forged or Fabricated Spiders17-723 LH




20 1/2" A 1 1/2" - 28 1 5/8" 17-658 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series;17-659 LH Fabricated Spider



20 1/2" B 1 1/2" - 28 1 5/8" 17-812 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; “Q Plus” Brake;17-813 LH Cast Spider


21 1/8" E 1 1/2" - 28 1 1/2" 17-11061 LH T Dexter 12 1/4"17-11062 RH




17





UHB800-CAM-ID

21 1/8" A 1 1/2" - 10 1 1/2" 17-582 RH T Multi-App. 16 1/2"17-583 LH

21 1/8" A 1 19/32" - 37 1 5/8" 17-622 RH T Fruehauf 16 1/2" “Pro-Par” Type Axle; Air Ride17-623 LH






21 3/16" D 1 19/32" - 37 1 5/8" 17-618 RH T Fruehauf 12 1/4" “Pro-Par” Type Axle; Air Ride17-619 LH








22" B 1 1/2" - 10 1 1/2" 17-562 RH T Spicer 16 1/2" "XL" Brake; Double Groove17-563 LH




22" B 1 1/2" - 10 1 5/8" 17-856 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-857 LH "XL" Brake; Double Groove



22 5/16" E 1 1/2" - 28 1 1/2" 17-11063 LH T Dexter 12 1/4"17-11064 RH

22 5/16" C 1 1/2" - 10 1 1/2" 17-698 RH T Eaton/ 12 1/4" Double Groove17-699 LH Shuler


18






UHB800-CAM-ID


22 3/8" A 1 1/2" - 10 1 1/2" 17-584 RH T Multi-App. 16 1/2"17-585 LH





22 5/8" B 1 1/2" - 28 1 5/8" 17-924 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-925 LH "XL";

22 7/8" A 1 1/2" - 28 1 1/2" 17-484 RH T Spicer 16 1/2"17-485 LH



22 7/8" A 1 1/2" - 10 1 1/2" 17-594 RH T Multi-App. 16 1/2"17-595 RH






19





UHB800-CAM-ID








23 5/16" E 1 1/2" - 28 1 5/8" 17-702 RH T Rockwell 12 1/4"17-703 LH

23 5/16" E 1 1/2" - 10 1 5/8" 17-716 RH T Rockwell 12 1/4"17-717 LH

23 3/8" E 1 1/2" - 28 1 1/2" 17-11065 LH T Dexter 12 1/4"17-11066 RH

23 7/16" A 1 1/2" - 10 1 1/2" 17-574 RH T Multi-App. 16 1/2"17-575 LH

23 1/2" A 1 1/2" - 28 1 1/2" 17-482 RH T Spicer 16 1/2"17-483 LH













23 7/8" A 1 19/32" - 37 1 5/8" 17-616 RH T Fruehauf 16 1/2" “Pro-Par” Type Axle; Air Ride17-617 LH

20






UHB800-CAM-ID





24" B 1 1/2" - 10 1 1/2" 17-506 RH T Spicer 16 1/2" "XL" Brake; Double Groove17-507 LH

24" B 1 1/2" - 28 1 1/2" 17-514 RH T Spicer 16 1/2" "XL" Brake17-515 LH

24" A 1 1/2" - 10 1 1/2" 17-586 RH T Multi-App. 16 1/2"17-587 LH

24" K 1 3/4" - 10 1 3/4" 17-672 RH T Spicer 20" Severe Duty; Cast Iron Shoe17-673 LH

24" B 1 1/2" - 10 1 5/8" 17-864 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-865 LH "XL" Brake; Double Groove

24" B 1 1/2" - 28 1 5/8" 17-930 RH T Spicer 16 1/2" Axles Manufactured After September 1995;17-931 LH "XL" Brake

24 1/16" B 1 1/2" - 28 1 5/8" 17-724 RH T Rockwell 16 1/2" “Q Plus” Brake; Forged or Fabricated Spiders;17-725 LH Air Ride

24 1/8" A 1 1/2" - 28 1 5/8" 17-630 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; Air Ride;17-631 LH Cast Spider

24 1/8" A 1 1/2" - 10 1 5/8" 17-642 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; Air Ride;17-643 LH Cast Spider

24 1/8" A 1 1/2" - 28 1 5/8" 17-660 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; Air Ride;17-661 LH Fabricated Spider

24 1/8" B 1 1/2" - 28 1 5/8" 17-814 RH T Rockwell 16 1/2" Rockwell 4000-6000 Series; “Q Plus” Brake;17-815 LH Air Ride; Cast Spider


21





UHB800-CAM-ID

24 3/8" A 1 1/2" - 10 1 1/2" 17-588 RH T Multi-App. 16 1/2"17-589 LH


24 5/8" E 1 1/2" - 28 1 1/2" 17-11067 LH T Dexter 12 1/4"17-11068 RH









25 3/4" A 1 1/2" - 10 1 1/2" 17-596 RH T Multi-App. 16 1/2"17-597 LH


26" B 1 1/2" - 28 1 1/2" 17-492 RH T Spicer 16 1/2" "XL" Brake17-493 LH

26 1/4" E 1 1/2" - 28 1 5/8" 17-424 RH T Spicer 12 1/4" After Manufactured After February 1996;17-425 LH Double Groove



26 1/4" A 1 1/2" - 10 1 1/2" 17-590 RH T Multi-App. 16 1/2"17-591 LH







26 1/2" E 1 1/2" - 28 1 1/2" 17-11069 LH T Dexter 12 1/4"17-11070 RH

22






UHB800-CAM-ID


26 1/2" A 1 1/2" - 10 1 1/2" 17-592 RH T Multi-App. 16 1/2"17-593 LH











23

CATALOG COMMENT FORMUHB800-CAM-ID

Dana Corporation strives to publish catalogs that are as accurate and user-friendly as possible.Continuous improvement is our ongoing mission. Therefore, we welcome any and all of our customers'comments. Please forward your comments with any suggested improvements or corrections to ourCatalog Department via Fax or mail.

Fax: Product Management / Catalog Department(419) 866-3924

Mail: Dana CorporationCommercial Vehicle Service PartsAttn: Product Management / Catalog DepartmentPO Box 321Toledo, OH 43697-0321

Comments and Suggested Improvement/Corrections Page Number Part Number

UHB800-CAM-ID6/02Printed in U.S.A

Copyright Dana Corporation, 2002.All rights reserved.

Dana CorporationCommercial Vehicle Service PartsP.O. Box 321Toledo, Ohio 43697-03211-800-SAY-DANA (729-3262)www.dana.comwww2.dana.com/expert

Dana CorporationCommercial Vehicle Service Parts-Canada5095 South Service RoadBeamsville, Ontario LOR 1BO905-563-4991

1-800-826-HELP (4357)http://roadranger.com

Roadranger

®

MORE TIME ON THE ROAD™

Dana CorporationCommercial Vehicle Service Parts-International10800 NW 103rd Street, Suite 11Miami, Florida 33178305-499-5100

Truck and Trailer S-Camshaft Quick Identification Guide

Documents

Transcript of Truck and Trailer S-Camshaft Quick Identification Guide