TRP International, LLC. › TRP-2014-Catalog.pdfFormed in 1992, TRP International, LLC. is a...

1

Products

TRP International, LLC.Throughout this catalog a TRP Service Mark appears next to those products manufactured by TRP.

CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

GVS Agricultural Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Butt Weld Style Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Hot Forged Integrated Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Hot Forged Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bar Stock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Hot Forged Integrated Flange Drop Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Round Bar Stock Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Square Bar Stock Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Hot Forged Drop Boat Trailer Spindle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Brake Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Spindle Fasteners & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Dust Caps – Rubber Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Tapered Roller Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Grease Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Brake Drums. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Idler Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Hydraulic Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Electric Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Leaf Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21U-Bolt Tie Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23Spring Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Shackle Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Cast Equalizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Spring Hangers – 13/4" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Steel Fabricated Equalizers – 2" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Spring Hangers – 2" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

10k General Duty Steel Fabricated Equalizers – 2.5" Wide Springs. . . . . . . . . . . 3110k General Duty Spring Hangers – 2.5" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . 30

Suspension Fasteners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32U-Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Mobile Home Axle Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35

Leaf Spring Bushings – Mobile Home Rim Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Shock Absorber – Shock Tie Plates & Mounting Brackets . . . . . . . . . . . . . . . . . . . . . 37

TruWeld-6 Weld Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Secondary Custom Operations – Custom Manufactured Components . . . . . . 49International Supplier Partners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Subsidiary Profiles

TRP International, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Company Profile

TRP DistributionGVS Technologies, LLC

Reference Guide for Hub Components & Axle Components. . . . . . . . . . . . 38-47

Formed in 1992, TRP International, LLC. is a diversified manufacturing and distribution corporation. At TRP we talk about “filling in the white space” as a way of growing the company. This strategy allows us to expand our product offerings, participate in new market segments, and maintain a competitive

position while staying close to the things we know. We accomplish this by introducing new products, enhancing current product lines, partnering with other companies or by making acquisitions. Whatever path we take, our goal is to provide our customers with an expansive line of quality products distributed on schedule at competitive prices with responsive and professional service.

Through the TRP group of companies and global partners we provide products to a variety of ground transportation equipment industries. By leveraging our expertise in the areas of Engineering, Manufacturing, International Trade and Distribution combined with a commitment to ongoing investments in technology and people, our objective is to share in the success of our customers by helping them maximize their efficiency while minimizing costs.

Engineering – Our engineering staff has experience in various design and manufacturing environments including leaf springs, tapered roller bearings, closed-die forgings, metal stampings, and CNC machining. Our resources include professional mechanical, quality, and metallurgical engineers. With these skills we are striving every day to improve the overall cost and quality of the products we offer. TRP has a focus on continuous improvement that is reflected in investments in computer aided design (CAD) software, and a coordinate measuring machine (CMM). These tools help our engineers assist you in making the right choice for your components.

International Trade – With over 22 years of international trade experience and qualified TRP personnel working through liaison offices in Italy and China we have the expertise necessary to communicate, consult, coordinate and execute the many facets of importing products to North America from abroad.

Distribution – With state of the art technology for order processing and fulfillment combined with strategically located distribution centers, we can effectively serve the requirements of customers from coast to coast in the U.S., as well as Canada and Mexico. Our constant attention to logistics and evaluation of carrier performance and pricing, assures the most efficient, cost effective shipping methods resulting in faster delivery and lower total product costs.

TRP International, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ISO 9001:2008

2

Manufacturing – The TRP companies take pride in the capability and efficiency of each piece of equipment used to manufacture our products. Recent investments in a new Programmable CMM, three new Live Tool Lathes, a 400mm Horizontal Machining Center, a 500mm Horizontal Machining Center, as well as a new Drill and Tap Machining Center are just a sampling of the investments made for the improvement of manufacturing. We strive to incorporate lean principles to keep costs down in our production facilities. Our charter is to "find waste and eliminate it". Each facility takes pride in shipping quality products and maintains a quality system that builds the framework for verifying that we meet customer specifications.

3

TRP Distribution is a major supplier of axle and suspension components to light and medium duty trailer axle manufacturers, trailer parts distributors, and trailer builders. It functions as the marketing and sales organization for the TRP subsidiary company, GVS Technologies, LLC. In addition TRP Distribution is the exclusive distributor in North America of leaf springs for Rockwell American Manufacturing, USA and steel forgings for Ghioni & Valaperta, Italy.

With strategically located distribution centers throughout the United States the products are closer to the customer helping to minimize transit times and shipping costs as well as shortening the material planning cycle. Customer requirements are fulfilled utilizing a state of the art networked system linking the distribution centers. This enables us to process orders efficiently, with greater accuracy, and usually within one business day.

Whether through domestically manufactured products from TRP International's subsidiary company or products sourced internationally through our global partners, TRP Distribution has a significant commitment to inventory. This commitment assures the customer of their requirements being met in the time frame desired.

CUSTOM FORGING DIVISION – Ghioni & Valaperta is located in the small town of Erba in Northern Italy. A manufacturer of custom closed die steel forgings, G&V ships forgings throughout the world. This family owned business of over 40 years supplies forgings and finished components to world-class industrial companies including GKN, Daimler-Chrysler, Audi and Volkswagen. G&V has positioned itself as a world-class forging supplier, combining unique technology and equipment with highly skilled and experienced employees. Together, G&V and TRP International have forged a secure business relationship dating back to 1992. G&V selected TRP as its North American distributor and product representative because of TRP’s solid reputation in the trailer industry. Through combined sales and engineering efforts supported by a broad domestic manufacturing and distribution base, TRP and G&V supply unparalleled quality forgings to customers in North

America. TRP and G&V value added capabilities grew in 1999 with the acquisition of GVS Technologies, a production machining business located in Elkhart, Indiana. The facility is equipped with highly capable, state of the art machinery that is always upgraded which allows GVS to consistently improve the quality of each component produced.

TRP Distribution

D I S T R I B U T I O N

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ISO 9001:2008

GVS Technologies, LLC ISO 9001:2008

Executive

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PROCESS CAPABILITIES

G)•

REPRESENTATIVE PRODUCTS

s /

4

GVS Technologies is our world class production machining company located in Elkhart, Indiana. The team at GVS has many years of valuable experience in machining a wide variety of axle and suspension components for the light and medium duty trailer industry. Axle spindles are the major product line ranging in diameters up to 5 inches and lengths exceeding 27 inches. These spindles can be machined from straight and drop hot forgings or hot rolled and cold drawn bar stock using the most advanced CNC lathes, live tool lathes, vertical mills, horizontal machining centers, and heat induction bending.

Spindles can be machined complete with an assortment of nut anti-rotation devices (e.g. cotter pins, D-flats, slots) lubrication passages and fittings, and welded brake flanges. GVS is also capable of machining to customer supplied custom designs. Control of raw materials and continuous monitoring and improvements in production processes insure consistent product quality.

• TappingCounter BoringPortingInduction Heating and Bending

••

•

5

Agricultural Division. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GVS Agricultural Division is a supplier of spindles, hubs, bearings, grease seals, dust caps and other related components to the agricultural market.

By combining our domestic manufacturing capabilities at GVS Technologies (see opposing page) with our international trade expertise at TRP International, we provide a broad range of high quality, competitively priced components to the agricultural market. Through our strategically located distribution center in Elkhart, IN. we have the product in stock and available for immediate shipment. Spindle products are manufactured to specific customer requirements and generally require a 2-3 week lead time to produce. Our exceptional staff of customer service personnel are prepared to assist with order entry, shipping logistics, and directing related customer inquiries to the appropriate individuals.

While we are committed to carrying an extensive inventory of the most popular items, we have the resources in place to work with customer supplied design products as well. Please direct your inquiries to your GVS Agricultural Division sales executive or customer service contact.

The above images are representative of the products available through GVS Agricultural Division. Information pertaining to the individual product specifications, packaging details, and part numbers can be viewed in a separate catalog available through your sales executive or customer service contact.

6

SPINDLE CAPACITY A B C D E FDIMENSIONSDESCRIPTION

BT16#84#84#84#42#42#42

PART NO.

1,250 lb.1,7501,7501,7503,5003,5004,000

1.95"1.95"1.95"2.55"2.45"2.45"2.93"

2.26"2.26"2.26"2.26"2.74"2.74"2.74"

6.35"6.35"6.05"6.35"8.25"8.25"8.61"

1.50"1.72"1.72"1.72"2.13"2.25"2.25"

1.062"1.376"1.376"1.376"1.749"1.749"1.749"

1.062"1.062"1.062"1.062"1.249"1.249"1.249"

H

2.34"2.45"2.34"3.00"3.00"3.00"3.50"

SP-HF-84BT16 SP-HF-84L SP-HF-84S SP-HF-8455 SP-HF-42L-213SP-HF-42L-225 SP-HF-8K

HOT FORGED


BT8BT8BT16BT16

PART NO.

1,000 lb.1,0001,2501,250

1.31"1.31"1.31"1.31"

N/A1.63"N/A

1.63"

5.96"6.68"5.96"6.68"

1.25"1.25"1.50"1.50"

0.999"0.999"1.062"1.062"

0.999"0.999"1.062"1.062"

H

1.75"1.75"1.75"1.75"

SP-HF-BT8SP-HF-BT8LSP-HF-BT16SP-HF-BT16L

BAR STOCK

BUTT WELD STYLE SPINDLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

UNIT WT.

3.20 lb.3.40 3.00 4.00 7.407.40

10.00

UNIT WT.

2.00 lb.2.252.252.50


#84#84#42#42

PART NO.

1,750 lb.1,7503,5003,500

H

SP-HF-IF-84L SP-HF-IF-8455 SP-HF-IFB-42L-213 SP-HF-IFB-42L-225

HOT FORGED INTEGRATED FLANGE

UNIT WT. I

1.95"2.55"2.45"2.45"

3.00"3.00"3.25"3.25"

6.35"6.35"8.25"8.25"

1.72"1.72"2.13"2.25"

1.376"1.376"1.749"1.749"

1.062"1.062"1.249"1.249"

2.45"3.00"3.00"3.00"

5.36"5.46"7.25"7.25"

3.29 lb.3.977.317.31

7

PARTNUMBER

SP-TT-IF-175

SP-TT-175AF

SP-UT-IFB-300-213

SP-UT-IFB-300-225

SP-UTH-400F

DIMENSIONS

1.95"

2.45"

2.45"

2.45"

2.93"

A B

2.77"

2.77"

2.64"

2.64"

3.00"

C

5.36"

5.36"

7.25"

7.25"

7.55"

D

1.72"

1.72"

2.13"

2.25"

2.25"

F

1.062"

1.062"

1.249"

1.249"

1.249"

DESCRIPTION

3500# Axle, 4" Drop For 2-3/8" Tube w/ Flange

3500# Axle, 4" Drop For 3" Tube w/ Flange


8000# Axle, 4" Drop w/ Forged Flange For 3-1/2" Tube

UNITWT.

6.63 lb.

8.45

12.25

12.25

17.10

S

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E

1.376"

1.376"

1.749"

1.749"

1.749"


- “B” straight

**Call for availability and lead time on spindles.

UT-300

TT-175

SP-TT-175AF has a welded flange.*

8

SPINDLETYPE CAPACITY A B C D E F

DIMENSIONSDESCRIPTION

C

A

B D E F M

C

A

B D E F M

Type 1 Type 2

ROUND BAR STOCK SPINDLES

PART NO.

SP-125BT8SP-125BT16SP-150BT8SP-150BT16SP-17584SP-20084SP-22542

BT8BT16BT8BT16#84#84#42

1111222

1,000 lb.1,250 1,0001,2501,7501,7503,500

1.25"1.25"1.50"1.50"1.75"2.00"2.25"

3.37"3.37"3.37"3.37"3.37"3.37"6.00"

8.25"8.25"8.25"8.25"8.25"8.25"

11.00"

1.23"1.23"1.25"1.48"1.72"1.72"2.23"

0.999"1.062"0.999"1.062"1.376"1.376"1.749"

0.999"1.062"0.999"1.062"1.062"1.062"1.249"

A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

UNIT WT.

2.25 lb.2.252.753.004.005.008.00

* Call for availability and lead time on spindles.

9

.

.

SPINDLETYPE CAPACITY A B C D E F

DIMENSIONSDESCRIPTION

Type 1 Type 2

PART NO.

SP-150BT8-SQ SP-150BT16-SQ SP-20484-SQ

w/seal ringSP-35684-SQ SP-50642-SQ

w/seal ring

C

A

B D E F M

C

A

B D E F M

SQUARE BAR STOCK SPINDLES

A

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

UNIT WT.

8

* Call for availability and lead time on spindles.

10

CUSTOM SPINDLE OPTIONS Welding . Welding

Note: (O nly - ) . . . . .

ORIGINAL

PARTNUMBER

SP-TB-175F

DIMENSIONS

A B C D E F G H I L

0

J K

B

I

H

E

F

C

J L M

A

TB

-175

D

K

G

PatentsPending

TB

-175

Camber = 1.5

88.5

The 2"x 2" or 2"x 3" tube is welded to the flat surface of the leg of the spindle. This spindle allows you to achieve a drop from 1.75" to 4.75."

AXLE PLACEMENT

4.75"

1.75"

TB

-175

TB

-175

AVAILABLE DROPS

HOT FORGED DROP BOAT TRAILER SPINDLE

- thread (M) with .190" cotter pin hole.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

UNITWT.

7.75 lb.

11

", ",

B

AD

EC

Type 1

A

CE

D

B

Type 2

Type 3 / 4

B E

DA

C

PARTNUMBER

DIMENSIONS REF.NO.

BOLTCIRCLE

CASEQTY.A B C ED

TYPE

PFL-41.30 PFL-41.51 PFL-41.64 PFL-41.75 PFL-42.27 PFL-52.31 PFL-52.75 PFL-53.12PFL-52.31-31 PFL-52.53 PFL-52.53-31PFL-42.31 PFL-42.56 PFL-42.96PFLD-42.96 PFL-43.12 PFL-43.53

11111222222333433

3.75"3.75"3.75"3.75"3.75"4.25"4.25"4.25"4.25"4.25"4.25"4.75"4.75"4.75"4.63"4.75"4.75"

3.75"3.75"3.75"3.75"3.75"4.44"4.44"4.44"4.44"4.44"4.44"4.75"4.75"4.75"4.63"4.75"4.75"

1.30"1.51"1.64"

"2.27"2.31"2.75"3.12"2.31"2.53"2.53"2.31"2.56"2.96"2.96"3.12"3.53"

0.23"0.25"0.25"0.25"0.25"0.25"0.25"0.25"0.31"0.25"0.31"0.37"0.37"0.37"0.26"0.37"0.37"

3.00"3.00"3.00"3.00"3.00"3.25"3.25"3.25"3.25"3.25"3.25"4.50"4.50"4.50"3.87"4.50"4.50"

4.00"4.00"4.00"4.00"4.00"3.87"3.87"3.87"3.87"3.87"3.87"5.28"5.28"5.28"4.96"5.28"5.28"

—4-294-344-164-124-6Q4-6T4-6—————————

2,000 pc.1,500 1,500 4,000 4,000 4,000 4,000 1,000 1,0001,0001,000

550550550550550550

BRAKE FLANGES

All Type 2 flanges are available with brake studs pressed in.Add “B” to end of flange part number.Studs are 3/8"- 24 x 7/8".

CASEWT.

1,500 lb.1,230 1,155 2,920 2,480 3,200 3,040

800 900900900

1,0501,0501,0501,0501,0501,050

UNITWT.

0.75 lb.0.82 0.77 0.73 0.62 0.80 0.76 0.80 0.900.900.901.901.901.901.901.901.90

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

SPINDLE FASTENERS & ACCESSORIES

2,000 pc.

PARTNUMBER

SIZEDIMENSIONS BOX

QTY.A

FA-CP175 1A

COTTER PIN

1,000 pc.

PARTNUMBER

DIMENSIONS BOXQTY.A B C

FA-SW100 1.67" 1.00"C

A

B

FLAT ROUND SPINDLE WASHER

0.61"0.27"0.65"0.62"0.59"0.75"

1,000 pc.1,0001,0001,000

500500

PARTNUMBER


WR-SS125WR-SS138WR-SS150WR-SS175WR-SS213WR-SS225

1.22"1.38"1.50"1.72"2.13"2.24"

1.07"1.16"1.20"1.39"1.85"1.87"

STAINLESS STEEL WEAR RINGS

C

A

B

SPINDLE

BTBTBT#84#42#42

0.88" 0.13" 950 pc.

PARTNUMBER

DIMENSIONS BOXQTY.A B C D

FA-DW100 1.67" 1.00"B

D

A

C

FLAT D-WASHER

0.55" 300 pc.

PARTNUMBER

THREADDIMENSIONS BOX

QTY.A B C

FA-SN100 1"-14 N.F. 1.46" 1.00"

SPINDLE NUTS

A C

B

0.40" 2,500 pc.

PARTNUMBER


FA-TW100 1.57" 1.00"C

A

B

FLAT BENT TANG WASHER

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 lb.10 10 12

6 7

BOXWT.

35 b.

BOXWT.

50 lb.

BOXWT.

45 lb.

BOXWT.

42 lb.

BOXWT.

12 lb.

BOXWT.

5,000 pc.

PARTNUMBER

SIZEDIMENSIONS BOX

QTY.

FA-ZERK 1/4"- 28 TAPER

GREASE ZERK

32 lb.

BOXWT.

0.21"

A B C

0.56" 0.26"

A

B

C

13

DUST CAPS – RUBBER PLUG

1.18"DC-RP

A

B

B

A

Rubber Lube Plug fits 1.18" Lubed Dust Cap Hole

C

RubberLube Plug

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DIMENSIONS

A B CDESCRIPTION

1.78"1.99"1.99"2.33"2.45"2.45"2.72"2.72"

1.30"

1.34"1.52"1.28"1.52"

N/AN/A

1.18"N/AN/A

N/A1.18"

BOXQTY.

pc.

430230

BOXWT.

lb.

N/A

N/A21-3

21-41N/A21-1

21.4221-3921-43

REF.NO.

PARTNUMBER

DC-178DC-200DC-200LDC-233DC-250DC-250LDC-275DC-275L

REGULAR DUST CAP

LUBED DUST CAP

1 3/4" Dust Cap2" Dust Cap2" Lubed Dust Cap2 1/3" Dust Cap2 1/2" Dust Cap2 1/2" Lubed Dust Cap2 3/4" Dust Cap2 3/4" Lubed Dust Cap

1.18"

14

TAPERED ROLLER BEARINGS

L-44649L-44643L-44610L-68149L-68111L-68110LM-67048LM-6701025580255201512315245*LM-11749*LM-11710

LM-11949LM-11910*LM-12749*LM-12710*LM-12711

LM-48548LM-48510LM-501349*LM-501310* JL-69349* JL-69310

14125A14276*HM-218248

HM-218210*HM-212049

HM-21201128580*28520

285210247502420JM-205149JM-205110JM-511946JM-511910

PARTNUMBER

1.0625"1.0000"

—1.3775"

——

1.2500"—

1.7500"—

1.2500"—

0.6875"—

0.7500"—

0.8656"——

1.3750"—

1.6250"—

1.4961"—

1.2500"—

3.5423"—

2.6250"—

2.0000"——

1.2500"—

1.9685"—

2.5591"—

CONE ID.

——

1.9800"—

2.3612"2.3280"

—2.3280"

—3.2650"

—2.4409"

—1.5700"

—1.7810"

—1.7810"1.8100"

—2.5625"

—2.8910"

—2.4803"

—2.7170"

—5.7864"

—4.8125"

—3.5425"3.6250"

—2.6875"

—3.5433"

—4.3307"

CUP OD.CASEQTY.

BOXQTY.

ConeConeCupConeCupCupConeCupConeCupConeCupConeCupConeCupConeCupCupConeCupConeCupConeCupConeCupConeCupConeCupConeCupCupConeCupConeCupConeCup

DESCRIPTION

297 pc.297297184184184184184

5555

120120400450360360350380450128192130150175192108108

10101424555555

55551624

10,692 pc.10,69210,692

6,6246,6246,6246,6246,6241,9801,980 4,320 4,320

14,400 16,200 12,960 12,960 12,600 13,680 16,200

4,608 6,912 4,680 5,400 6,300 6,912 3,888 3,888

360360504864

1,9801,9801,980

1,9801,980

576864

.

* Non-stock items. Minimum order quantities and longer lead time will apply.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

BOXWT.52 lb.592747272549255226412350426536544047533860395332401940204534522626

52265234

CASEWT.

1,872 lb.2,124

9721,692

972900

1,764900

1,872936

1,476828

1,8001,5122,3651,3201,9441,4401,6921,9081,3682,1601,4041,9081,1521,440

6841,440

7201,6201,2241,872

936936

1,872936

1,8721,224

*

*

15

GREASE SEALS

1.250"1.500"1.720"1.938"2.125"2.250"

SHAFTDIAMETER

1.979"1.983"2.561"2.506"3.372"3.371"

BOREDIAMETER

1.983"1.987"2.565"2.510"3.377"3.376"

SEALOD.

0.250"0.188"

0.500"0.281"0.375"0.375"

SEALWIDTH

BT8BT16#84M/H#42#42

SPINDLE

*GS-1250SL*GS-1500SL*GS-1719SL*GS-1938SLGS-2125SL

*GS-2250SL

PARTNUMBER

12192VB15191VB

171255VB193502VB

21333VB22333VB

REF.NUMBER

1.250"1.500"1.687"1.720"2.125"2.250"

1.979"1.983"2.561"2.561"3.372"3.371"

1.983"1.987"2.565"2.565"3.376"3.376"

0.250"0.250"0.500"0.500"0.313"0.375"

BT8BT16#84#84#42#42

SHAFTDIAMETER

BOREDIAMETER

SEALOD.

SEALWIDTH SPINDLE

GS-1250DLGS-1500DLGS-1687DLGS-1719DLGS-2125DLGS-2250DL

PARTNUMBER

REF.NUMBER

12192TB15192TB

168255TB171255TB

21333TB22333TB


1.250"1.500"1.687"1.719"2.125"2.230"

1.979"1.983"2.561"2.561"3.371"3.372"

1.986"1.990"2.568"2.568"3.378"3.378"

0.406"0.250"0.500"0.500"0.375"0.375"

BT8BT16#84#84#42#42

SHAFTDIAMETER

BOREDIAMETER

SEALOD.

SEALWIDTH SPINDLE

GS-1250DLRGS-1500DLR

*GS-1687DLRGS-1719DLRGS-2125DLRGS-2250DLR

PARTNUMBER

REF.NUMBER

12194TC15192TC

168255TC171255TC

22333TC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1,680 pc. 1,680

360 480 300 300

BOXQTY.

1,6801,680

480600300300

BOXQTY.

1,680 360

480 300 300

BOXQTY.

66 lb.

40

2831

BOXWT.

BOXWT.

47 lb.3234343130

66 lb.544039 2831

BOXWT.

pc

1,680 pc.

DOUBLE LIP RUBBER COATED SEALS

SINGLE LIP SEALS

DOUBLE LIP SEALS

*

16

BRAKE DRUMS

PARTNUMBER

DESCRIPTION CASEQTY.

UNITWT.

CASEWT.

1,750 lb. 5 on 4.50" L-68111 L-44610 21.10 lb. 95 pc. 2,100 lb.

1,750 5 on 4.75" L-68111 L-44610 21.10 95 2,100

1,750 5 on 5.00" L-68111 L-44610 21.10 95 2,100

1,750 5 on 5.50" L-68111 L-44610 21.10 95 2,100

RVD-U-5450

RVD-U-5475

RVD-U-5500

RVD-U-5550

RVD-U-6550 1,750 6 on 5.50" L-68111 L-44610 22.00 95 2,190

3,000 6 on 5.50" 25520 15245 31.70 63 2,100

3,500 8 on 6.50" 25520 14276 37.00 54 2,100

RVD-H-655

RVD-H-865

RVD-H-865-916 3,500 8 on 6.50" 25520 14276 37.00 54 2,100

)

.

.

CAPACITY BOLT DIA. INNER RACE OUTER RACE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

IDLER HUBS

PARTNUMBER


UNITWT.

CASEWT.

1,000 lb. 4 on 4.00" L-44610 L-44610 16.48 lb. 504 pc. 3,265 lb.

1,250 5 on 4.50" L-44610 L-44610 16.43 680 4,370

RVI-BT-4400

RVI-BT-5450

RVI-U-5450 1,750 5 on 4.50" L-68111 L-44610 17.23 544 4,380

1,750 5 on 4.75" L-68111 L-44610 17.23 512 3,695

1,750 5 on 5.00" L-68111 L-44610 17.23 512 3,695

1,750 5 on 5.50" L-68111 L-44610 19.45 448 4,235

RVI-U-5475

RVI-U-5500

RVI-U-5550

RVI-U-6550 1,750 6 on 5.50" L-68111 L-44610 19.60 324 3,110

3,000 6 on 5.50" 25520 15245 13.74 315 4,326

3,500 8 on 6.50" 25520 14276 17.03 200 3,405

CAPACITY BOLT DIA. INNER RACE OUTER RACE

(RVI-H-865-916 studs are 9/16"-18)

Hubs

RVI-H-655 RVI-H-865 RVI-H-865-916 3,500 8 on 6.50" 25520 14276 17.03 200 3,405

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

BRAKES AVAILABLE10"x 21/4" 10"x 21/4" 12"x 2" 12"x 2"

Uni-ServoFree BackingUni-ServoFree Backing

HYDRAULIC BRAKES

BK-40715 BK-40716 BK-40715X BK-40716X BK-42028 BK-42029BK-42028X BK-42029XBK-18787 BK-18788 BK-23510 BK-23511

RH, 10" Free Backing, E-coat

LH, 10" Free Backing, E-coat

RH, 10" Free Backing, Dacromet

LH, 10" Free Backing, Dacromet

RH, 12" Free Backing, E-coat

LH, 12" Free Backing, E-coat

RH, 12" Free Backing, Dacromet

LH, 12" Free Backing, Dacromet

RH, 10" Uni-Servo, E-coat

LH, 10" Uni-Servo, E-coat

RH, 12" Uni-Servo, E-coat

LH, 12" Uni-Servo, E-coat

PARTNUMBER DESCRIPTION

CASEQTY.

UNITWT.

156 pc.

156

156

156

117

117

117

117

156

156

117

117

9.59 lb.

9.59

9.59

9.59

14.66

14.66

14.66

14.66

8.49

8.49

13.34

13.34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The

CASEWT.

1,602 lb.

1,602

1,602

1,602

1,822

1,822

1,822

1,822

1,430

1,430

1,666

1,666

FEATURES

omet: inor

* Individually boxed brakes are available; add a P to the end of the part number.

19

ELECTRIC BRAKES

PARTNUMBER


UNITWT.

CASEWT.

. . . .

4.10 lb. 420 pc.

168

1,822 lb.BK-7E-01/02 BK-10E-01/02 BK-12E-01/02 BK-10E-01SA/02SABK-12E-01SA/02SA BK-8KE-01/02 BK-10KE-01/02

* Individually boxed brakes are available; add a P to the end of the part number.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LH/RH, 7"x 11/4" Assembly

LH/RH, 10"x 21/4" Assembly

LH/RH, 12"x 2" Assembly

LH/RH, 10"x 21/4" Self-Adjusting Assembly

LH/RH, 12"x 2" Self-Adjusting Assembly

LH/RH, 8K, 121/4"x 33/8", Self-Adjusting Assembly

LH/RH, 10K, 121/4"x 33/8",Self-Adjusting Assembly

12" x 2"

Self-Adjusting 10K, 12 1/4" x 3 3/8"

8K, 12 1/4" x 3 3/8"10" x 2 1/4"

9.88

Self-Adjusting

168

9.60

14.75

18.5618.50

126

81

81

1,732

1,936

1,553

1,547

1,637

2,000

20

PARTNUMBER

DE-041MDE-7216DE-7217DE-7213DE-726DE-729DE-7218DE-113DE-114DE-7227DE-7222DE-7242DE-SW4BDE-7226DE-7223DE-7224DE-7225DE-1764DE-SW3DE-SW4DE-SW5DE-SW6DE-26350DE-26500DE-261000DE-AWS2DE-AWS3DE-AWS4DE-AWS5DE-AWS6DE-AWS7DE-AWS8DE-33611DE-33612DE-33613DE-33617DE-45527

20.00" 20.31 20.38 20.50 23.13 23.13 23.13 23.50 23.50 24.88 25.25 25.25 25.25 25.13 25.25 25.25 25.25 25.25 25.25 25.25 25.25 25.25 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 27.00 27.00 27.00 27.00 27.00

3.25"3.383.183.383.633.503.503.503.503.383.183.003.003.133.003.003.003.003.003.003.003.004.134.124.124.254.254.254.254.254.254.253.502.882.883.252.75

1,500 lb. 700

1,000 1,400 1,250 1,750 2,000 1,000 1,400 3,500 1,250 1,750 1,750 3,000 1,500 2,000 2,500 2,900 1,750 2,500 2,950 3,500

350 500

1,000 1,000 1,500 2,000 2,500 3,000 3,500 4,000

750 1,000 2,100 3,000 2,250

9.40 lb. 6.107.009.309.10

11.0012.40

9.3010.7018.30

9.6011.7011.7015.4011.00 12.3015.1017.0011.7013.8016.3019.10

7.009.10

11.109.90

12.0014.00 17.1020.3023.4027.20

9.1010.1014.0022.3017.30

UNA-168,DX-720 UNA-169, X1020 UNA-167UNA-135UNA-216, 1724-3L UNA-170, WAH-4 UNA-113, 545-3L UNA-114, 545-4L UNA-222, 1769UNA-219, SW3B UNA-212, SW4B SW4B, 93184UNA-221UNA-217UNA-220, 1762, SW3 UNA-218, 1763, SW4 UNA-111, 1764, SW5 UNA-220, 1762, 72-24 UNA-218, 1763, 72-25 UNA-111, 1764UNA-223, SW6UNA-121, 26-350, AS2 UNA-122, 25-500, AS3 UNA-124, 26-1000, AS4 UNA-049, AWS2UNA-050, AWS3 UNA-051, AWS4 UNA-052, AWS5 UNA-053, AWS6 UNA-054, AWS7 UNA-055, AWS8 UNA-144, 15327 UNA-141, 20327 UNA-210, 35427 UNA-142, 60627 UNA-234, 45527

3 3 3 4 3 3 4 3 4 6 3 4 4 4 3 3 4 5 3 4 5 6 2 3 4 2 3 4 5 6 7 8 3 3 4 6 5

NUMBEROF LEAVES

FREELENGTH

FREEARCH

CAPACITYPER SPRING

WEIGHTEACH

REFERENCENUMBERS

DOUBLE EYE – 13/4" WIDE Arch

Length

PARTNUMBER

SF-047 SF-013 SF-014 SF-015 SF-432110 SF-433115 SF-434117 SF-434118

24.50" 25.12 25.12 25.12 30.00 30.00 30.00 30.00

4.12" 5.00 5.00 5.00 4.88 4.88 4.88 4.88

1,675 lb.500750

1,000950

1,5002,0002,400

11.00 lb. 5.807.909.50

10.1012.5012.2018.30

UNA-047 UNA-013 UNA-014 UNA-015 UNA-038, WD-2 UNA-039, WF-3 UNA-040, WG-4 UNA-040N, WG-5

3 2 3 4 2 3 4 5

NUMBEROF LEAVES

FREELENGTH

FREEARCH

CAPACITYPER SPRING

WEIGHTEACH

REFERENCENUMBERS

SLIPPER FLAT – 13/4" WIDE

LEAF SPRINGS

Arch

Length

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200 200 200 200 200 200 200 200 150 200 200 200 200 200 200 200 125 200 200 125 125 200 200 200 200 200 200 125 125 130 125 200 200 200 125 125

SKIDQTY.

250 250 250 200 500 200 150

SKIDQTY.

1,878 lb. 1,220 1,400 1,860 1,820 2,200 2,480 1,860 2,134 2,738 1,920 2,348 2,340 3,080 2,200 2,458 3,014 2,125 2,340 2,760 2,038 2,388 1,400 1,820 2,220 1,972 2,394 2,798 2,134 2,538 3,043 3,400 1,820 2,022 2,800 2,788 2,158

SKIDWT.

2,200 lb. 1,4501,9752,3752,0206,2502,4402,745

SKIDWT.

200 pc.

200 pc.

21

PARTNUMBER

SR-WC1 SR-WC2 SR-WE3 SR-WH4 SR-WI5 SR-028 SR-034 SR-024 SR-029 SR-029N

24.62"24.6224.6224.6224.6232.0032.0032.0032.0032.00

4.50"4.504.504.504.504.254.254.254.254.25

550750

1,0001,200

600800

1,1001,4001,750

4.20 lb. 5.407.809.00

12.107.80

10.9012.4014.4018.30

UNA-176, WC-1 UNA-177, WC-2 UNA-178, WE-3 UNA-179, WH-4 UNA-180, WI-5 UNA-028UNA-034 UNA-024 UNA-029UNA-029N

1234523456

NUMBEROF LEAVES

FREELENGTH

FREEARCH

CAPACITYPER SPRING

WEIGHTEACH

REFERENCENUMBERS

SLIPPER RADIUS – 13/4" WIDE Arch

Length

PARTNUMBER

SH-7229 SH-7230 SH-7231 SH-7232 SH-7232RB SH-7233 SH-E5226 SH-E5115

26.50"26.5026.5026.5026.5026.5026.5029.50

3.18"3.003.063.183.183.003.503.50

1,500 lb.2,0002,5003,5003,5004,0003,4004,300

15.80 lb. 16.4017.6020.4020.5027.0020.5028.70

UNA-229, 60-3T3 UNA-230, 80-3T3 UNA-231, 100-3T3 UNA-232, 120-3T3 120-3T3 RB UNA-233, 140-3T3 UNA-160, 5226 UNA-161, 5115

44455756

NUMBEROF LEAVES

FREELENGTH

FREEARCH

CAPACITYPER SPRING

WEIGHTEACH

REFERENCENUMBERS

SLIPPER HOOK – 2" WIDE Arch

Length

PARTNUMBER

SO-C1 SO-C2 SO-C3 SO-C4 SO-C5 SO-C6 SO-C21.03 SO-C31.03 SO-C41.03 SO-C51.03 SO-C61.03

26.2526.2526.2526.2526.2526.2526.2526.2526.2526.2526.25

3.503.503.503.503.503.503.503.503.503.503.50

8001,3001,7502,3502,8503,5001,3001,7502,3502,8503,500

250 pc.200200200150125200200200150125

8.30 lb. 10.7012.1014.9017.4021.3010.7012.1014.9017.4021.30

UNA-261, C1UNA-262, C-2UNA-263, C-3UNA-264, C-4UNA-265, C-5UNA-211, C-6C-2C-3C-4C-5C-6

23345633456

NUMBEROF LEAVES

FREELENGTH

FREEARCH

CAPACITY PER SPRING

SKIDQTY.

WEIGHTEACH

REFERENCENUMBERS

SLIPPER OPEN – 13/4" WIDE Arch

Length

PARTNUMBER

DE-7240 25.25" 3.00" 3,000 lb. 0.590" Eye 8.70 lb. UNA-115, 72-40, TE-301

NUMBEROF LEAVES

FREELENGTH

FREEARCH

CAPACITYPER SPRING

BUSHINGID.

WEIGHTEACH

REFERENCENUMBERS

MOBILE HOME – 13/4" WIDE Arch

Length

," " "* All specifications given are for reference only. Spring mounting will affect actual capacity. The capacity given above is the

maximum rating per spring.

150 pc.150150125125125125100

SKIDQTY.

250 pc.250200200200200200200200150

SKIDQTY.

2,075 lb. 2,1402,4282,9742,6132,6612,1402,4282,9742,6132,661

SKIDWT.

lb.

2,550

3,375

2,870

SKIDWT.

1,050 lb. 1,3501,5581,8002,4201,5582,1802,4802,9202,745

SKIDWT.

SKIDQTY.

SKIDWT.

440 pc. 3,826 lb.

280 lb.

22

U-BOLT TIE PLATES

PARTNUMBER

SPRINGWIDTH

TUBEDIA.

DIMENSIONS CASEQTY.

REF.NO.A B C D E F

TP-175173TP-175175 TP-200175 TP-200175-T2TP-200175-56TP-238175 TP-238200 TP-300175 TP-300200 TP-300209 TP-350200

1.75"1.752.002.002.002.382.383.003.003.003.50

1.75"1.751.751.751.751.752.001.752.002.002.00

TYPE

22121111111

2.19"2.312.632.632.632.942.943.623.563.564.13

2.19"2.312.382.382.382.312.562.382.592.592.63

3.75"3.754.003.503.503.754.003.754.004.004.00

3.50"3.505.923.505.925.925.925.925.925.927.00

4.80N/

4.804.804.804.804.804.805.69

0.41"0.560.620.560.56 0.56 0.56 0.56 0.56 0.620.69

TP-712-14

———

12-312-412-112-2

21-12-2—

1,000 pc.1,0001,0001,0001,0001,0001,0001,0001,0001,0001,000

Type 1A

0.66"

45

F

C

B

D E

(4 Places)

0.23

Type 2A

0.66"

F

C

B

D

(4 Places)

0.23

CASEWT.

840 lb.840

1,320730

1,3201,4601,5601,4501,5601,5502,870

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Material: High quality pickled and oiled structural steel per ASTM specifications. Available galvanized and with clear or yellow chromate on zinc, call for availability and pricing The specifications and dimensions above are for reference only. Non-stock items. Minimum order quantities and longer lead time will apply.

*

*

23

U-BOLT TIE PLATES (cont.)

PARTNUMBER

SPRINGWIDTH

TUBEDIA.

DIMENSIONS CASEQTY.

REF.NO.A B C D E F

TP-300175R TP-300200-56R TP-500250R TP-500300RTP-500300-81R TP-513250R

2.38"2.382.383.003.005.005.005.005.13

1.75"1.752.001.752.002.503.003.002.50

TYPE

4444

2.88"2.942.883.623.625.775.755.875.94

2.25"2.312.502.352.603.253.883.883.38

3.50"3.753.753.503.755.006.006.005.00

4.75"4.754.755.375.379.009.009.009.00

N/

0.50"0.560.500.560.560.690.690.810.81

—————

12-4912-5312-46

—

2,000 pc.2,0001,0002,0002,000

250 200 200 250

Type 4

CASEWT.

TP-238175-50R TP-238175R TP-238200R

2,420 lb.2,2001,1002,2002,4001,0001,1801,1001,000

Type 3


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

SPRING SEATS

SS-2381.20 0.56 1.85 0.67 0.22

PARTNUMBER

TUBEDIA.

DIMENSIONS CASEQTY.A B C D E F G

SS-300 1.51 4.00

1.20 0.56 1.85 0.67 0.221.19 4.00

3.00

2.38

SS-175 0.94" 0.53" 1.85" 0.67" 0.22"0.88" 2.25"1.75" 2,000 pc.

2,000

1,000

1.20 0.56 1.85 0.67 0.22SS-350 1.76 4.00

REF.NO.

3-1

3-8

3-23

90316

N/A

N/A

3.50 500

UNITWT.

0.38

0.77

0.74

0.75

2.14

0.45

CASEWT.

745

1,600

770

400

1,100

920

1.60 0.78 2.50 0.88 0.38SS-500 2.54 6.005.00 500

0.94 0.53 1.85 0.67 0.22SS-200 2.03 3.002.00 2,000

TYPE

1

1

1

1

1

2

Type 1

Type 2

Round Tube

Square/Rectangular Tube

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

*

*

*Non-stock items. Minimum order quantities and longer lead time will apply.

25

SHACKLE LINKS

PARTNUMBER

DIMENSIONS CASEQTY.

REF.NO.A B C D E

18-11

N/

SL-200SL-225

SL-250 SL-256SL-263 SL-275 SL-313 SL-350SL-363SL-425SL-475SL-225-150SL-250-150SL-275-150SL-313-150SL-375-150SL-400-150SL-450-150SL-525-150SL-556-150

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.63

0.22

0.22

0.22

0.22

0.22

0.22

0.25

0.25

0.25

0.22

0.25

0.22

0.22

0.25

0.25

1.25

1.25

1.25

1.25

1.25

1.25

1.50

1.50

1.50

1.50

1.50

1.50

1.50

1.50

1.50

2.75

3.13

3.50

3.63

4.25

4.75

2.25

2.50

2.75

3.13

3.75

4.00

4.50

5.25

5.56

4.00

4.38

4.75

4.90

5.53

6.03

3.53

3.78

4.03

4.40

5.03

5.28

5.78

6.53

6.84

2,000 pc.

2,000

2,000

2,000

2,000

6,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

2,000

D

A

B

(2 PLACES)

C

E

.57

All shackle links are available with shackle bolts pressed in. Add “B” to end of shackle link part number.

2.56 3.81 0.63 0.22 1.25 18-115 2,000

UNITWT.

0.230 lb.

0.235

0.240

0.240

0.261

0.264

0.285

0.314

0.263

0.335

0.405

0.420

0.440

0.470

0.340

0.580

0.445

0.470

0.740

0.780

CASEWT.

490 lb.

500

510

510

552

558

600

1,974

556

700

840

870

910

970

710

1,190

920

500

1,510

1,590

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

—

—

—

—

—

—

—

—

—

—

—

—

—

—


*

*

*

**

*

*

*

*

26

CAST EQUALIZERS

All cast equalizers are manufactured from ductile iron. Equalizers are manufactured to industry standards and come finished in black paint.

PARTNUMBER

DIMENSIONS UNITWT.

CASEQTY.A B C D

EQ-356 1,000

EQ-458 900

EQ-E1 700

EQ-E34 700EQ-R83 200EQ-R89 200

EQ-310

EQ-105 576

EQ-104 1,000

EQ-R2 5.50"6.065.756.136.256.759.067.757.758.008.00

1.50"4.002.002.502.002.003.002.882.881.751.75

0.563"0.5630.5630.5630.7500.5630.5630.5630.7500.7500.563

250 pc.

630

2.65 lb.

2.851.952.252.353.453.902.753.453.303.35

***

*

* AAlso available galvanized, call for availability and pricing.

B

A

EQ 310

C

EQ-310DD

EQ E1 B

A

C

EQ-E1DD

EQ 104

A

B

C

EQ-104DD

B C

A

EQ R2

EQ-R2

DD

B

A

EQ 356

C

EQ-356DD

B

A

EQ 458

C

DD

EQ-458 EQ-105

EQ 105

C

A

BD

D

B C

A

EQ R89

DD

EQ-R89

B C

A

EQ R83

DD

EQ-R83

A

C

EQ E34

DD

EQ-E34

B

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CASEWT.

2,3202,225

2,000

2,520690700

1,900

2,090

2,000

715 lb. 0.563"0.5630.5630.5630.5630.5630.5630.5630.5630.5630.563

EQ-126 300 1,240

EQ 126

EQ-126

B

A

C

D

D

27

SPRING HANGERS – 1 3/4" WIDE SPRINGS

PARTNUMBER

DIMENSIONS UNITWT.

REF.NO.ATYPE B C D E F

—

93003X28-6

29-828-328-528-4————

1

11

11111222

1.13"

1.121.44

2.002.463.254.255.381.943.504.75

2.13"

2.132.06

2.633.093.874.876.192.814.385.63

1.44"

1.301.88

1.881.881.881.881.881.881.881.88

1.50"

3.003.00

3.003.003.003.003.002.502.502.50

0.23"

0.230.23

0.230.230.230.230.380.220.220.30

0.41 lb.

1.200.67

1.211.371.662.184.530.771.392.52

CASEQTY.

1,000 pc.

2,0002,000

1,000750

1,500500

5001,000

750500

CASEWT.

407 lb.

2,4001,340

1,2051,0272,4901,0802,265

7701,0401,260

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

* Non-stock item. Minimum order quantities and longer lead time will apply.

N/A 1.21 2.00 0.21 1.00 N/A 4104-4 561 0.28 2,000

HG-100HG-112HG-144HG-200HG-246HG-325HG-425HG-538HG-194HG-350

HG-SSHG-475

3

*

*

*

*

28

STEEL FABRICATED EQUALIZERS – 2" WIDE SPRINGS

EQ-1304EQ-5541EQ-1344EQ-4541

13-45541

13-44-14541

PARTNUMBER

DIMENSIONS

144 pc. 126144126

CASEQTY.

REF.NO.

11.00"12.0013.0012.00

3.50"4.003.504.00

5.19"4.445.944.44

4.63"4.755.504.75

0.88"0.880.880.88

E

0.44"0.560.440.56

0.56"0.560.560.56

G

NOTE: Center bushing for EQ-5541 and EQ-4541 utilize .88" ID. nylon bushing encased in a 1.31" OD. x 1.06" ID. steel tube.

A

B

DCF

E

G

The following steel fabricated equalizers are designed for the use of 2" wide slipper springs in a tandem or triple axle application. The equalizers are made to industry standards.

UNITWT.

6.60 lb. 9.807.788.20

“t” equals thickness of material.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

950 lb.

1,1201,235

CASEWT.A B C D F

0.22"0.310.220.24

t

1,035

*


29

F

A

EC D

B

GF

A

EC D

B

G

E

H

F

A

G

C D

B

F

A

EC D

B

GF

A

EC D

B

G F

A

E

G

C D

B

H

HG-281-F / HG-2891-F HG-291-C / HG-2951-C HG-3028-R / HG-3061-R

STANDARD DUTY

SPRING HANGERS – 2" WIDE SPRINGS

PARTNUMBER

DIMENSIONS CASEQTY.

REF.NO.A B C D E F28-129-1

30-2828-9-129-5-130-6-11584-41586-41585-4158415861585

HG-281-F HG-291-C HG-3028-RHG-2891-F HG-2951-C HG-3061-RHG-15844-F HG-15864-C HG-15854-R HG-15843-F HG-15863-C HG-15853-R

1.50"1.501.501.501.501.502.002.002.001.501.501.50

4.25"3.505.375.004.506.433.563.385.063.563.385.06

4.88"4.506.005.635.537.064.314.506.004.314.506.00

2.25"3.062.252.253.062.252.193.132.192.193.132.19

3.00"3.003.003.003.003.004.004.004.003.003.003.00

0.25"0.310.250.250.310.250.300.300.300.300.370.30

400 pc.375250250250250500500500750750750

G0.57"

0.89/0.900.380.57

0.89/0.900.380.57

0.84/0.900.570.57

0.84/0.900.57

H

N/A N/A 3.752.882.484.82N/A N/A 3.47N/A N/A 3.47

UNITWT.

2.43 lb.2.803.323.284.083.763.323.694.782.523.313.34

CASEWT.

970 lb.1,050

830820

1,020940

1,6631,8472,3911,8882,4802,500

HEAVY DUTY

***

* Non-stock item. Minimum order quantities and longer lead time will apply.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HG-15844-F / HG-15843-F HG-15864-C / HG-15863-C HG-15854-R/ HG-15853-R

30

10K GENERAL DUTY STEEL FABRICATEDEQUALIZERS - 2 1/2" WIDE SPRINGS

6000GD 100 13-082 126

EQ-5000GDEQ-6000GDEQ-42LHEQ-42RHEQ-48LHEQ-48RHEQ-13140EQ-13141

5000GD

13-08313-08413-08513-14013-141

PARTNUMBER

DIMENSIONS

130 pc.

126 102 102 135 100

CASEQTY.

REF.NO.

15.75"21.7518.5018.5024.6324.6318.3824.75

4.75"4.755.195.195.195.195.195.19

7.00"10.007.757.75

10.8810.887.13

10.38

7.88"10.88

7.067.06

10.2510.25

6.7510.00

1.00"1.001.001.001.001.001.001.00

E

2.38"2.382.162.162.162.162.252.25

0.78"0.780.770.770.770.770.750.75

G

The following steel fabricated equalizers are designed for the use of 2 1/2" wide slipper springs in a tandem or triple axle application. The equalizers are made to industry standards and supplied as oiled metal.

UNITWT.

20 lb. 26181824241520

“t” equals thickness of material.

2,600 lb. 2,6002,282 2,2822,467 2,467 2,025 2,000

CASEWT.

A B C D F

0.31"0.310.250.250.250.250.200.20

t

EQ-5000GDEQ-6000GD

EQ-42LHEQ-42RHEQ-48LHEQ-48RH

EQ-13140EQ-13141

A

F

C

E

D

G

B

A

FE

D

GC

B

A

G

F E

C

D

B

See page 31 for correspondinghanger sets.

******


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

PARTNUMBER

HG-2942-C

DIMENSIONSCASEQTY.

REF.NO.A B C tD E

300020004000

72-108472-108472-108672-1085

28-7429-4230-61

HG-3000-F HG-2000-CHG-4000-RHG-1084-F-LH HG-1084-F-RHHG-1086-C HG-3061-R HG-2874-F HG-2942-C HG-3061-R

2.00"2.502.002.502.502.502.502.002.502.50

5.50"1.755.505.255.254.384.445.254.254.44

8.00"3.198.007.007.005.887.006.505.637.00

2.75"4.132.752.632.633.252.622.633.252.75

4.00"5.004.004.504.505.004.504.005.004.50

0.24"0.240.240.240.240.370.240.190.240.24

395 pc.395 395 350 350 350 350 330 330 330

F0.78"1.00N/A

0.770.771.062.250.761.002.25

G

N/AN/A

6.13N/AN/AN/A

5.562.751.755.56

UNITWT.

4.60 lb.5.005.805.305.307.235.844.305.805.70

CASEWT.

1,817 lb.1,975 2,291 1,840 1,840 2,530 2,045 1,420 1,915 1,880

HG-3000-F

HG-1084-F-RH

HG-2874-F

HG-2000-C

HG-1086-C

HG-4000-R

HG-3061-R

HG-3061-R

Each of the hanger sets below correspond to the steel fabricated equalizers directly opposite on page 30.

D

B

A

F

E

B

A

ED

F

D

B

A

E

G

D

B

A

G

F

E

D

A

B

E

F

D

A

B

E

F

D

E

F

B

A

G

D

G

A

BE

F

D

B

A

G

F

E

*

**

*Non-stock items. Minimum order quantities and longer lead time will apply.

***

*

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10K GENERAL DUTY STEEL FABRICATEDEQUALIZERS - 2 1/2" WIDE SPRINGS

32

.

SUSPENSION FASTENERS

FABRICATED EQUALIZER BOLTS & NUTS

FA-7-1-1 50 46 .

FA-7-1-0 50 46FA-7-254 37

FA-6-111 300 54

FA-7-3 190 pc. 43 lb.190 43

515152

175175 100 200 48200 51

37130 160

1,000 321,000 561,000 56

FA-LSB225 Bolt, Spring Retainer 500 pc. 40 lb.

DIMENSIONS

SHACKLE BOLTS & NUTS

LEAF SPRING CENTER BOLTS

DIMENSIONS

DIMENSIONS

FA-6-3 325 300 49

FA-6-111Z 300 54FA-FLN375

Nut, Slotted Hex, Plain

Nut, Top Lock, Zinc Nut, Lock, Zinc

7/8" – 9

7/8" – 9 3/8" – 16 4,000 61

37

FA-7-17Z FA-126A1LN FA-7-126 FA-126B2LN FA-7-236-1 FA-7-187 FA-3416 FA-916DLN FA-916DLNZ FA-6-92Z

Bolt, Hex, GR5, Plain Bolt, Hex, GR5, Zinc Bolt, Drilled Head, no Zerk, GR5, Plain Bolt, GR 5, Step Down Thread Bolt, Lubed, Hex, GR5, Plain Bolt, Lubed, Hex, GR5, Step Down Thread Bolt, Lubed, Hex, GR5, Step Down Thread Nut, Slotted for FA-126AILN Nut, Top Lock, Plain Nut, Top Lock, Zinc Nut, Flange, Steel Zinc, No Serrations

3.50" x 9/16" – 18 3.50" x 9/16" – 18 3.50" x 3/4" – 16 2.90" x 7/16" – 20 3.00" x 9/16" – 20 3.40" x 7/16" – 20 2.90" x 7/16" – 20 3/4" – 16 9/16" – 18 9/16" – 18 7/16" – 20 1,400 58

FA-LSB325 Bolt, Spring Retainer 500 52

FA-LSN375 Bolt, Spring Retainer Nut, Hex for Spring Retainer Bolt

2.25" x 3/8" – 24 3.25" x 3/8" – 24 4.00" x 3/8" – 24 3/8" – 24 950 40

DESCRIPTION

DESCRIPTION

DESCRIPTION

PARTNUMBER

PARTNUMBER

PARTNUMBER

BOXQTY.

BOXWT.

BOXQTY.

BOXWT.

BOXQTY.

BOXWT.

FA-LSB400 500 60

1,500 pc.150 41370 51

DIMENSIONS

MISCELLANEOUS FASTENERS

DESCRIPTIONPART

NUMBERBOXQTY.

BOXWT.

700 60600 47300 47

FA-7-112 FA-6-058 FA-7-40X FA-6-080 FA-6-053 FA-6-176 FA-6-109 300 32FA-WS-1840 FA-WS-2310

Press in Brake Stud, GR5 Nut, Flange Wheel, Zinc, GR8 Wheel Bolt, Hex Head Wheel Nut, 60 Degree, GR5, Zinc Wheel Nut, 60 Degree, GR5, Zinc Spindle Nut, 12 Slot Wheel Nut, 90 Degree, GR8, Zinc Wheel Stud, GR8, Yellow Zinc Wheel Stud, GR8, Yellow Zinc

.88" x 3/8" – 24 5/8" – 18 1.63" x 1/2" – 20 1/2" – 20 9/16" – 18 1.00" – 14 5/8" – 18 1.84" x 1/2" – 20 2.31" x 9/16" – 18 100 20

100 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FA-7-3ZFA-7-17

36 lb.

33

U-BOLTS

(C ) (F )

Type 1

PARTNUMBER

THREADSIZE

TUBEDIA.

DIMENSIONS CASEQTY.

UNITWT.A B C

TYPE

2

CASEWT.

SPRINGWIDTH

UBR-175429-38C UBR-175429-38F UBR-175429-50F UBR-238513-44F UBR-238550-50F UBR-238625-50F UBR-300650-50F UBR-300700-50F UBR-300700-56F UBR-350800-56F UBR-500900-63C UBS-200575-56F UBS-200650-56F 2 2.00" 1.75" 9/16"-18 2.09" 6.50" 2.50" 0.95 3,200 3,100

Type 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

MOBILE HOME AXLE PRODUCTS

15,000 pc.440200

1,0006,6246,6246,6246,624

3605,0005,0002,5002,5001,2501,2502,5002,500

11,520

Rim ClampSingle Leaf Spring Multiple Leaf Spring EqualizerInner Bearing Cone Inner Bearing Cup Outer Bearing Cone Outer Bearing Cup Dust Cap2.00" Shackle Link 2.25" Shackle Link 1.00" Spring Hanger1.44" Spring Hanger 2.46" Spring Hanger 3.25" Spring Hanger3.00" Axle Tube U-Bolt Tie Plate 3.00" Axle Tube Spring Seat Grease Seal, Single Lip 1.938" Shaft


CASEQTY.

TRP International continues to lead the industry with a full range of mobile home axle and suspension products.

SINGLE LEAF SPRING

MULTIPLE LEAF SPRING

SHACKLE LINK

RIM CLAMP

BEARING

DUST CAP

SPRING HANGER

U-BOLT TIE PLATE

SPRING SEAT

EQUALIZER


FA-1512DE-7240DE-7226EQ-104L-68149L-68111LM-67048LM-67010DC-250SL-200SL-225HG-100HG-144HG-246HG-325TP-300175SS-300GS-1938SL*

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35

MOBILE HOME AXLE PRODUCTS

150 pc.81240

1,350

Idler Hub With Rim Clamps And Bolts Brake Drum With Rim Clamps And Bolts 12" Electric Brake With Magnet, Left Hand 12" Electric Brake With Magnet, Right Hand Hot Forged Butt Weld Style Spindle


CASEQTY.

IDLER HUB

SPINDLE

BRAKE DRUM

ELECTRIC BRAKE


*MHI-122458-RCB*MHD-122459-RCB**BK-12EMHL-01BK-12EMHR-02SP-122457*

240

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

PARTNUMBER

BU1-1506BU1-1508BU1-1566BU1-1568BU1-1561BU1-2566BU1-3871

DIMENSIONS

1.75"

1.75"

1.75"

1.75"

1.75"

2.00"

3.00"

0.5000"

0.5000"

0.5625"

0.5625"

0.5625"

0.5625"

0.8800"

0.6875"

0.8750"

0.6875"

0.8750"

1.0400"

0.6875"

1.1250"

BOXWT.

BOXQTY.

LEAF SPRING BUSHINGS

AB

C

Type 1

226

224, W-5

227, W-1

225, W-3

228

229, W-2

NB 78

300 pc.

300

300

300

300

300

150

6 lb.

6

6

6

7

8

7

1

1

1

1

1

1

1

TYPE

0.54" 15,000 pc.

PARTNUMBER

DIMENSIONS CASEQTY.A B C

FA-1512 1.26" 1.36"A C

B

MOBILE HOME RIM CLAMP

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

REF.NO.C

OD.BID.

ALENGTH

2,100 lb.

CASEWT.

* Also available galvanized, call for availability and pricing.

37

PARTS KIT – TOP

SHOCK ABSORBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SA-568167 RV Shock w/ Parts Kit


722 pc.

CASEQTY.

UNITWT.

2.75 lb.

PARTS KIT – BOTTOM

PARTNUMBER

SPRINGWIDTH

TUBEDIA.

DIMENSIONS CASEQTY.A B C D E F

TP-7710TP-7709 3.00"

1.75"2.00"

2.94"3.62"

2.31"2.38"

5.00" 5.92" 4.69" 0.56" 1,500 pc.

G

0.53"

35

E

5

F (4 Places)

A

C

B

G (2 Places)

D

1,986 lb.

CASEWT.

CASEWT.

3,128 lb.

ST-BRKT-205 ST-BRKT-325

PARTNUMBER

1,000 pc.1,000

CASEQTY.

CASEWT.

400 lb.760

DIMENSIONS

A B C D E F

1.75"2.75"

2.00"3.25"

0.69"0.69"

2.05"2.05"

1.02"1.02"

0.50"0.50"

A

B

C

D

E

F

**


SHOCK TIE PLATES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SHOCK MOUNTING BRACKETS

2.38"5.00" 5.92" 4.69" 0.56" 1,5000.53" 3,128

2,000# CAPACITY

AXLE COMPONENT DIAGRAM

ITEM PART NUMBER DESCRIPTIONBar Stock, Butt Weld Style Spindle

Bar Stock, Butt Weld Style Spindle

Round Bar Stock, 1.25" Diameter Spindle


Square Bar Stock, 1.50" Diameter Spindle

Brake Flange

Brake Flange

Spring Seat, for 1.75" OD Axle Tube

2

1

U-Bolt 3/8"-16 Thread


U-Bolt 1/2"-20 Thread4

5

6

SP-HF-BT8SP-HF-BT8L SP-125BT8SP-150BT8SP-150BT8-SQ PFL-41.30PFL-41.51SS-175UBR-175429-38C UBR-175429-38F UBR-175429-50F TP-175173TP-175175FA-FLN375 Nut, Lock, Zinc

3

Tie Plate

Tie Plate

38

123

4

5

CATALOG PAGE #

6

6

8

8

9

11

11

24

33

33

33

22

22

32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. The recommendations above are for reference only.

1

1

1

1

2

4

4

5

6

11A DC-RP Rubber Plug For Lubed Dust Cap Hole

12 FA-6-080 Wheel Nut, Cone

9 FA-CP175 Cotter Pin

10 DC-200 Dust Cap

11 DC-200L Dust Cap, Lubed

7

FA-TW100 Spindle Washer, Tang

FA-SW100 Spindle Washer, Flat Round

FA-DW-100 Spindle Washer, Flat D-Washer

8 FA-SN100 Spindle Nut, 6 Slot

1

2

RVI-BT-4400 Idler Hub, 440 BT

5 L-44610 Outer Bearing, Cup

L-44643 Outer Bearing, Cone

4

6

GS-1250DL Grease Seal, Double Lip, 1.250"

L-44643 Inner Bearing, Cone

GS-1250DLR Grease Seal, Double Lip Rubber Coated, 1.250"

GS-1250SL Grease Seal, Single Lip, 1.250"

3 L-44610 Inner Bearing, Cup

1

2

3

412

5

6

7

8

9 10

11 11 A

39

15

15

15

14

14

17

14

14

12

12

12

12

12

13

13

13

32

HUB COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ITEM PART NUMBER DESCRIPTION CATALOG PAGE #1

1

7

7


2,000# CAPACITY

2

4

5 Tie Plate

1 Bar Stock, Butt Weld Style Spindle

3

6

SP-HF-84BT16 SP-HF-BT16 SP-HF-BT16L SP-125BT16 SP-150BT16L SP-150BT16-SQ PFL-41.30PFL-41.51SS-175UBR-175429-38C UBR-175429-38F UBR-175429-50F TP-175173TP-175175FA-FLN375 Nut, Lock, Zinc





Square Bar Stock, 1.50" Diameter Spindle

Brake Flange

Brake Flange

Spring Seat, for 1.75" OD Axle Tube




Tie Plate

40

123

4

5

6

6

6

6

8

8

9

11

11

24

33

33

33

22

22

32

ITEM PART NUMBER DESCRIPTION CATALOG PAGE #

1

1

1

1

1

2

4

4

5


2,500# CAPACITY

AXLE COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

3

4

7

11 DC-200L Dust Cap, Lubed

11A DC-RP Rubber Plug For Lubed Dust Cap Hole

12 FA-6-080 Wheel Nut, Cone

8 FA-SN100 Spindle Nut, 6 Slot

9 FA-CP175 Cotter Pin

10 DC-200 Dust Cap

5 L-44610 Outer Bearing, Cup

6 L-44649 Outer Bearing, Cone

FA-TW100 Spindle Washer, Tang

FA-SW100 Spindle Washer, Flat Round

FA-DW-100 Spindle Washer, Flat D-Washer

L-44649 Inner Bearing, Cone

L-44610 Inner Bearing, Cup

RVI-BT-5450 Idler Hub, 545 BT

GS-1500DLR Grease Seal, Double Lip, Rubber Coated, 1.500"

GS-1500SL Grease Seal, Double Lip, 1.500"

GS-1500DL Grease Seal, Double Lip, 1.500"

1

1

2

3

4 12

5

6

7

8

9 10

11 11 A

41

15

15

15

14

14

17

14

14

12

12

12

12

12

13

13

13

32


7

7

1

1



2,500# CAPACITY

TP-238175-50R TP-238175-R TP-238200R TP-300175R FA-FLN375 FA-6-92Z Nut, Flange, Zinc6

5

Tie PlateTie PlateTie Plate

Tie Plate

TP-238200 TP-300175 TP-300200 Tie Plate

Tie Plate

Nut, Lock, Zinc

Tie Plate

1A

SP-HF-IF-84L SP-HF-IF-8455 SP-HF-84LSP-HF-84SSP-HF-8455 SP-17584SP-20084SP-20484-SQ SP-35684-SQ SP-TT-175F SP-TT-175AF PFL-41.75PFL-42.27SS-238SS-300UBR-238513-44F UBR-238550-50F UBR-238625-50F UBR-300650-50F TP-238175 Tie Plate

4U-Bolt, 1/2"-20 Thread U-Bolt, 1/2"-20 Thread U-Bolt, 1/2"-20 Thread

3

Hot Forged 4" Drop, Flanged Spindle Hot Forged 4" Drop, Flanged Spindle Brake Flange Brake FlangeSpring Seat, for 2.38" OD Axle TubeSpring Seat, for 3.00" OD Axle TubeU-Bolt, 7/16"-20 Thread

2

Butt Weld Style, Integrated Flange SpindleButt Weld Style, Integrated Flange Spindle

1

Square Bar Stock SpindleSquare Bar Stock Spindle

Butt Weld Style, Hot Forged SpindleButt Weld Style, Hot Forged Spindle

Round Bar Stock Spindle

Butt Weld Style, Hot Forged SpindleRound Bar Stock Spindle

42

4

1 1A2

3 56

66666889977

111124243333333322222222232323233232

ITEM PART NUMBER DESCRIPTION CATALOG PAGE #1

11

11

111

1A

2

3

444

55

5

5555

6


3,500# CAPACITY


5

2

5A

8

1

4

67

3

Brake Drum, 5 Bolt on 4.75" BCBrake Drum, 5 Bolt on 5.00" BC

BK-10E-01/ BK-10E-02 BK-10E-01SA/BK-10E-02SA GS-1719DLGS-1719SLGS-1719DLRL-68149L-68111RVD-U-5450

10"x 2.25" LH/RH Brake Assembly 10"x 2.25" LH/RH Self-Adjusting Brake Assembly Grease Seal, Double Lip, 1.720"Grease Seal, Single Lip, 1.720"Grease Seal, Double Lip Rubber Coated, 1.720" Inner Bearing, ConeInner Bearing, CupBrake Drum, 5 Bolt on 4.50" BC

Idler Hub, 5 Bolt on 4.50" BC

Brake Drum, 5 Bolt on 5.50" BC

RVD-U-5475 RVD-U-5500 RVD-U-5550 RVD-U-6550 Brake Drum, 6 Bolt on 5.50" BC

Outer Bearing, Cup

Idler Hub, 5 Bolt on 4.75" BCIdler Hub, 5 Bolt on 5.00" BCIdler Hub, 5 Bolt on 5.50" BCIdler Hub, 6 Bolt on 5.50" BC

Outer Bearing, ConeSpindle Washer, Flat Round

9 Spindle Nut, 6 SlotSpindle Washer, Tang Spindle Washer, Flat D-Washer

10 Cotter Pin11 Dust Cap

13

RVI-U-5450 RVI-U-5475 RVI-U-5500 RVI-U-5550 RVI-U-6550 L-44610 L-44649 FA-SW100 FA-DW100 FA-TW100 FA-SN100 FA-CP175 DC-200 DC-200L DC-RP FA-6-080 Wheel Nut, Cone

12 Dust Cap, Lubed12A Rubber Plug For Lubed Dust Cap Hole

1

2

3

4

5

5A

6

713

8

9

1011

12 12A

43

19

1515151414161616161617171717171414121212121213131332


21

2

55

55

5A5A

5A5A

8

8



3,500# CAPACITY

19

Brake Flange Brake Flange

2 Brake Flange

Brake Flange

Brake FlangeBrake Flange

1A Hot Forged 4" Drop, Integrated Flange Spindle

1

6 Nut, Lock, Zinc

TP-300175R TP-300200-56R FA-FLN375 FA-6-92Z Nut, Flange, Zinc

5

SP-HF-IFB-42L SP-HF-42LSP-22542SP-50642-SQ SP-UT-IFB-300 PFL-52.31PFL-52.75PFL-53.12PFL-52.31-31 PFL-52.53PFL-52.53-31 SS-300UBR-300650-50F UBR-300700-50F UBR-300700-56F TP-300175

Spring Seat, for 3.00" OD Axle TubeU-Bolt, 1/2"- 20 Thread U-Bolt, 1/2"- 20 Thread U-Bolt, 9/16"-18 Thread Tie Plate

Tie PlateTie Plate

TP-300200 TP-300209 TP-350200 Tie Plate

Tie PlateTie Plate

4

3

Round Bar Stock SpindleSquare Bar Stock Spindle

Butt Weld Style, Integrated Flange Spindle

Butt Weld Style, No Flange Spindle

44

1A5

6

1 2

3

4

66897

111111111111243333332222222223233232



1

11

2

222

2

44

5

55

55

6

5,200/6,000# CAPACITY


5

5A

6

7

11

RVD-H-655

FA-6-080

12" x 2" LH/RH Brake Assembly

12" x 2" LH/RH Self-Adjusting Brake Assembly

Grease Seal, Double Lip, 2.125"

Grease Seal, Double Lip, 2.250"

Inner Bearing, Cone

Inner Bearing, Cup

Brake Drum, 6 Bolt on 5.50" BC

Idler Hub, 6 Bolt on 6.50" BC

Outer Bearing, Cup

Outer Bearing, Cone

Spindle Washer, Flat Round

Spindle Washer, Flat D-Washer

Spindle Washer, Tang

Spindle Nut, 6 Slot

Cotter Pin

Dust Cap

Dust Cap, Lubed

Rubber Plug For Lubed Dust Cap Hole

Wheel Nut, Cone

3 255804 25520

1524515123

12A DC-RPDC-250LDC-250

FA-SW100FA-DW100FA-TW100

8

9

10

12

13

FA-CP175FA-SN100

1

2

BK-12E-01/BK-12E-02 BK-12E-01SA/BK-12E-02SA GS-2125DLGS-2250DL

RVI-H-655

1

2

3

4

5

5A

6

7

8

9

1011

12 12A13

45

19

19

15

15

14

14

16

17

14

14

12

12

12

12

12

13

13

13

32



1

2

8

8


5,200/6,000# CAPACITY

34

Tie Plate

SP-HF-IFB-42L SP-HF-42LSP-22542SP-50642-SQ SP-UT-IFB-300 PFL-52.31PFL-52.75PFL-53.12PFL-52.31-31 PFL-52.53PFL-52.53-31 SS-300UBR-300650-50F UBR-300700-50F UBR-300700-56F TP-300175

Spring Seat, for 3.00" OD Axle TubeU-Bolt, 1/2"- 20 Thread U-Bolt, 1/2"- 20 Thread U-Bolt, 9/16"-18 Thread Tie Plate

Brake Flange, WeldedBrake Flange, WeldedBrake Flange, Welded

Brake Flange, Welded Brake Flange, WeldedBrake Flange, Welded

1A2

Square Bar Stock SpindleHot Forged 4" Drop, Integrated Flange Spindle

Round Bar Stock Spindle

1 Butt Weld Style, Integrated Flange Spindle

Butt Weld Style, No Flange Spindle

Tie Plate

TP-300200 TP-300209 TP-350200 Tie Plate

Tie PlateTie PlateNut, Lock, Zinc

TP-300175R TP-300200-56R FA-FLN375 FA-6-92Z Nut, Flange, Zinc

46

1A5

6

1 2

3

4

6

6897

111111111111243333332222222223233232



1

11

2

222

2

4

455

55

55

66

7,000# CAPACITY


67

1112

12A DC-RP13 FA-6-080

FA-6-053

12" x 2" LH/RH Brake Assembly 12" x 2" LH/RH Self-Adjusting Brake Assembly Grease Seal, Double Lip, 2.125"Grease Seal, Double Lip, 2.250"Inner Bearing, ConeInner Bearing, CupBrake Drum, 8 Bolt on 6.50" BCBrake Drum, 8 Bolt on 6.50" BC, 9/16" Studs Idler Hub, 8 Bolt on 6.50" BCIdler Hub, 8 Bolt on 6.50" BC, 9/16" Studs Outer Bearing, Cup Outer Bearing, Cone Spindle Washer, Flat RoundSpindle Washer, Flat D-WasherSpindle Washer, TangSpindle Nut, 6 SlotCotter PinDust CapDust Cap, LubedRubber Plug For Lubed Dust Cap HoleWheel Nut, Cone Wheel Nut, Cone

DC-275DC-275L

FA-TW1009 FA-SN100

10 FA-CP175

14125A8 FA-SW100

FA-DW100

14276

5

5A

3 255804

1

2

BK-12E-01/BK-12E-02 BK-12E-01SA/BK-12E-02SA GS-2125DLGS-2250DL

1

2

3

4

5

5A

6

7

8

9

10 11

12 12A13

47

191915151414161617

141412121212121313133232



RVD-H-865 RVD-H-865-916

5A 17

1

2

5

88

13


7,000# CAPACITY

25520

RVI-H-865RVI-H-865-916

Features: Low welding cost and high productivity. Low electricity consumption. Little Deformation after welding. Easy to operate with all position welding. Low hydrogen and nitrogen content yielding excellent crack resistance. Spools are individually boxed.

Type Unit Weight Pallet Qty. Shipping Weight

Manufacturing The quality system of the manufacturer has been certified by the international quality system according to ISO9001.The Company has joint approval by the following classification societies: China (CCS) Britian (LR) America (AWS)Japan (NK) Poland and Spain.

PART NUMBER

WIRE DIMENSIONSDESCRIPTION

PACKAGING

TRUWELD-6 WELD WIRE

Inches Millimeters

WW-035-044WW-045-044WW-035-550WW-045-550

Mig Weld Wire

Mig Weld Wire

Mig Weld Wire

Mig Weld Wire

0.035"

0.045"

0.035"

0.045"

0.90 mm

1.20 mm

0.90 mm

1.20 mm

Spool

Spool

Barrel

lb.

44

550

550

pc.

60

4

4

lb.

2,820

2,304

2,304

AWS 5.18 ER70S-6 is GMAW (Gas Metal Arc Welding) often referred to by its subtype MIG (Metal Inert Gas), a solid carbon steel, copper coated, gas shielded welding wire.

Please direct your inquiries to your TRP International Sales Executive

TruWeld-6 TRP International. In keeping with all TRP T ruWeld-6

TruWeld-6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48

49

SECONDARY CUSTOM OPERATIONS

STUDDED BRAKEFLANGE

WELDED BRAKEFLANGE

SHACKLE LINK WITHBOLTS PRESSED IN

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CUSTOM MANUFACTURED COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MACHINE TORSIONARMS

Please contact your TRP Sales Executive for availability and pricing information.

TRP International offers numerous secondary custom operations as well as custom manufactured components through our subsidiary company and global supplier partners.

SLIDE-OUT CLEVIS DAMPENING FLANGE STAINLESS STEELVALVE

PULLEY SHAFT

FORGED TORSION ARMS

GENERATOR SHAFTS

FORGED BRAKE SPIDERS

TORSION SPINDLES SUSPENSION BLOCKS

KINGPINS PLANTER CLEVIS BENT SPINDLES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .International Supplier Partners

Electric BrakesHydraulic BrakesMobile Home BrakesBrake Drums / Idler HubsTapered Roller BearingsMobile Home Rim ClampGrease SealsLeaf SpringsCast EqualizersFabricated Equalizers / Spring HangersDust Caps - Rubber PlugButt Weld Spindles / Hot Forged Drop Spindles / Torsion Arms

Beijing

Shanghai

Hong Kong

TRP

With over 22 years of international trade experience and qualified TRP personnel working through liaison offices in Italy and China we have the expertise necessary to communicate, consult, coordinate and execute the many facets of importing products to North America from abroad. TRP develops long term partnerships with our global supplier partners. These strong and loyal relationships are the cornerstone of our success.

PRODUCTS / MANUFACTURING LOCATIONS

/GVS TRP Italy TRP China

50

TRP, International, LLC. TERMS and CONDITIONS

TERMS:

All orders are subject to credit approval by our credit department. Net 30 days from date of shipment, unless specified otherwise in writing by TRP International. All past due accounts shall accrue interest at a rate of 1.5% per month based upon the outstanding balance at the end of the month plus any additional fees incurred in the collection process, including attorney fees.

PRICES:All shipments will be at the prices in effect at order acceptance, including any possible raw material surcharges that may be implemented. Prices and specifications are subject to change without notice. Minimum order of $100.00 is required. Any order less than $100.00 will be subject to a $25.00 handling charge.

TRP International's acceptance of customer orders, whether verbal or written does not include an acknowledgment or acceptance on behalf of TRP of any terms or conditions of customers purchase order, whether stated expressly or implied.

ORDERS:

CANCELLATION AND CHANGES:Due to immediate production of manufactured products, orders containing these items are considered firm and are not subject to cancellation or change without approval. Any approved cancellations or changes are subject to additional charges at TRP International's discretion.

FREIGHT:

All shipments are F.O.B. TRP International and are shipped "Freight Collect" unless specified otherwise in writing by TRP. Products are carefully inspected and packed to assure that they will arrive in good condition. In case of shortage or damage, purchaser should promptly file a claim with the delivering carrier. TRP is not liable for damage or loss of merchandise after it has left our facilities, we will however assist you in filing a claim.

RETURNS:

Return requests must be made within 30 days of shipment. Return authorization is required before the items are returned for any reason. We will consider issuing a return authorization for the following reasons; manufacturing defect, order processing error, shipping error, mismarked cartons, or duplicated shipments. Returns for any other reason, and no fault of TRP, are subject to a 20% restocking charge and when authorized, must be returned freight prepaid. Return merchandise will be subject to inspection. Any discrepancies, additional damage, signs of use, or missing parts will result in an adjustment to the amount of credit issued.

The products listed in this catalog are warranted by the manufacturers to be free from defects in materials and workmanship for a period of one year from the date of original purchase. This warranty is in lieu of all other warranties expressed or implied. This warranty covers normal use and application and does not cover damage or defect which results from alteration, accident, neglect, impropoer installation, operation or maintenance.

TRP International's obligation under this warranty is limited to the repair or replacement of the defective part, and in no event shall TRP be liable for reimbursement of consequential, indirect or incidental damages of any kind.

LIMITED WARRANTY:

......................................................................................................................................................

BACK COVER

TRP International, LLC. › TRP-2014-Catalog.pdfFormed in 1992, TRP International, LLC. is a...

Documents

Transcript of TRP International, LLC. › TRP-2014-Catalog.pdfFormed in 1992, TRP International, LLC. is a...