Aluminium radiators

Maximum quality, maximum comfortIncaltec Industrial is a company with a long specialisation in the manufacture of injected aluminium heating radiators.Its modern facilities and industrial equipment provide its products with the highest guarantee of quality and finish.Our activity ranges from the design and production of OEM products to complete lines of domestic heating.Our production processes include all the phases, from the injection of aluminium and plastic, assembly and finishing, and finally a double application of paint, the first with application by anaphoresis, ensuring excellent properties against corrosion of the product, and subsequently another new electrostatic application of epoxy polyester to provide a perfect finish. Incaltec radiators are available in RAL 9010 white.

Technical CharacteristicsThe radiators are composed of elements made of injected aluminium, prepared to work with a water temperature of up to 110 degrees Celsius and are particularly suitable for operation at low temperatures. Each radiator is tested unitarily at a pressure of 9 bar to guarantee has been perfectly sealed. It must be ensured that the installation does not exceed 6 bar of maximum pressure and water inlet speeds higher than 0.55 m / sec are not recommended.

Painting is carried out in two phases:• Application of acrylic paint using the anaphoresis process.• The electrostatic epoxy polyester process is used for final

finishing.• Colour RAL 9010.

Conditions of Guarantee INCALTEC radiators are guaranteed for a period of 10 years against manufacturing defects as long as the following can be considered:

• The installation was carried out by qualified techniciansbased on current regulations.

• The installation requirements described in the previousparagraph were complied with.

• The cleaning was carried out avoiding abrasive productsor solvents.

Installation requirementsINCALTEC radiators are optimally used in both single-tube and twin-tube systems. They can be used without problems in installations with iron, copper or plastic pipes.The use of an automatic vent installed in each radiator is recommended.In case of not using an automatic purging system, the radiator should never be completely isolated from the rest of the installation. This point must be considered above all when never isolating monotube installations.The maximum work pressure is 6 bar.The PH of the installation must be between 7 and 8, and must not contain corrosive elements that attack the metals. The use in the installation of treatments with HS 23 Al Cillit type polyamides or similar is recommended in order to avoid the corrosion and the formation of incrustations.For cleaning, only use a cloth dampened in water, avoiding abrasive products or solvents.The installation must be set at a minimum distance with the radiator at 25 mm with respect to the wall, 120 mm with respect to the ground and 100 mm with respect to any superior element (see diagram). To avoid noise derived from radiator dilation, the use of INCALTEC plastic brackets is recommended (see photo).

25mm

120 mm

100 mm

Guarantee10 year

SERIESCB

350/500/600/700

The CB Series offers an exclusive line, which is the result of a careful design that combines aesthetic innovation with the best functionality.

Guarantee10 year

Model Wheelbase (mm)

Overall height (mm)

Depth (mm) Water content (l)

Width (mm) Weight (gr) ExponentsThermal power

t T 600 C une 442Watt Kcal/h

Thermal power t T 500 C une 442Watt Kcal/h

Thermal power t T 400 C une 442Watt Kcal/h

Connection

350 350 420 96 80 0,425 1,211 1,31589 72,7 62,5 97,1 83,5 123,0 105,8 1 ”

500 500 577 98 80 0,552 1,352 1,34071 92,0 79,1 123,0 105,8 155,9 134,0 1 ”

600 600 675 96 80 0,646 1,648 1,3534 103,7 89,2 140,0 120,4 178,9 153,8 1 ”

700 700 777 95 80 0,7788 1,706 1,35795 117,7 101,2 159,0 136,7 203,3 174,8 1 ”

Technical specifications

SERIESONE

350/500/600/700

The One Series offers a robust and solid line, oriented to obtain maximum performance and efficiency.

350 350 420 96 80 0,426 1,179 1,29645 72,0 61,9 96,1 82,6 121,7 104,7 1 ”

500 500 582 96 80 0,598 1,295 1,299 91,2 78,4 121,9 104,8 154,5 132,8 1 ”

600 600 675 96 80 0,682 1,604 1,3442 102,2 87,9 138,0 118,7 176,3 151,6 1 ”

700 700 777 96 80 0,7738 1,689 1,34696 114,8 98,7 155,0 133,3 198,1 170,4 1 ”

Technical specifications

Guarantee10 year

Model Wheelbase (mm)

Overall height (mm)

Depth (mm) Water content (l)

Width (mm) Weight (gr) ExponentsThermal power

t T 600 C une 442Watt Kcal/h

Thermal power t T 500 C une 442Watt Kcal/h

Thermal power t T 400 C une 442Watt Kcal/h

Connection

Pol. Ind. Fuenteciega. c/ Álamos, 39. Apdo. 226. 26200 Haro (La Rioja) Spain. Tel. 941 311 369 Fax. 941 305 057info@incaltec.es

INCALTEC INDUSTRIAL S.A.

www.incaltec.es

SERIESCB

SERIESONE