TRIPLE OFFSET TYPE - · PDF fileThe seat surfaces of body and seal ring in triple offset valve...
Transcript of TRIPLE OFFSET TYPE - · PDF fileThe seat surfaces of body and seal ring in triple offset valve...
Triple offset metal seat butterfly valve provide a bi-directional and bubble-tight shutoff which is attributed to the geometry of triple offset seat.
The valve stem is offset by seat (1st offset) and the valve seat surface center line is offset against the center line of pipe (2nd offset) and the conical axis is offset by valve center line (3rd offset: inclined cone). The 3rd offset completely eliminates rubbing.
The seat surfaces of body and seal ring in triple offset valve contact with the inclined “cone-in-cone” and this design requires excellent sealing and seat part durability by slight wedging effect.In addition, the angle of contact between body and seal ring has a good sealing performance by low torque because the angle travels the initial torque from actuator to seat parts without any loss by jamming.
This valve is characteristic of concentric, offset and double offset construction with remarkable sealing performance and seat part durability, and moreover it is hardly needed to repair.
• Excellent durability of seat part and low operating torque by non-rubbing characteristics with triple offset construction.• Bi-directional zero leakage service by resilient metal sealing and torque seating.• Unrestricted selection of face to face dimensions for API, ASME(ANSI), BS, ISO, etc. and perfect interchangeability of gate, ball, plug, high performance butterfly, and other VALVE.• Low emission by quarter turn construction and good performance at automation by virtue of low operating torque and low cost.
TRIPLE OFFSET DESIGN PRINCIPLES
CHARACTERISTICS AND MERITS
TRIPLE OFFSET TYPE
PK_82PK_86
• Designed in accordance with ASME B 16.34 or other customer requirements.• Fire safe design
STANDARD
• ASME B16.5 : Class 150, 300,600 JIS B2210 : 10K. 16K, 20K, 30K, 40K DIN, ISO PN10, PN16, PN20, PN25, PN40
• ASME B16.47 series A : Class 150, 300 MSS-SP-44 : Class 150, 300, 600 BS 3293 : Class 150, 300
• MAUNAL WORM GEAR • ELECTRIC, PNEUMATIC & HYDRAULIC ACTUATOR LOCK LEVER
• API 598 • MSS-SP-61, ANSI B16.104
TESTING
• ISO 5211MOUNTING FLANGE
OPTION
• API 609 Table 2./ MSS-SP-68 Table 1 Class 150 & 300 : 3"~ 24" Class 600 : 3"~ 12"
• ISO 5752 Table 4, BS 5155 Table 6 (short) Class 150 & 300 : 3"~ 24" ISO 5752 Table 4, BS 5155 Table 6 (long) Class 600 : 3"~12"
• ISO 5752 Table 5 Class 150 & 300 : 28"~ 48" Class 600 : 14"~ 24"
• ISO 5752 Table 4, BS 5155 Table 6 (short) Class 150 & 300 : 28"~ 80" ISO 5752 Table 4, BS 5155 Table 6 (long) Class 150 & 300 : 3"~ 80" Class 600 : 14"~24"
• ASME B16.10 Class 150 & 300 : 3"~ 24" Class 600 : 3"~24"
• ISO 5752 Table 4, BS 5155 Table 6(long) Class 150 & 300 : 3"~ 80" Class 600 : 3"~24"
WAFER AND LUG TYPE
DOUBLE FLANGE
BUTT WELDING
FACE TO FACE DIMENSIONS
DESIGN FEATURE
PK_83
OPERATING
END FLANGE
PK_87
• The valve body shall be one piece cast or fabrication.• The body can be supplied with different types of materials in wafer, lug, or flanged and butt
welding end connections to satisfy all installation requirements.
• The valve seat shall be integrated with the body.• Stellite or stainless steel shall be applied on the seating surface of valve body.• The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero leakage.
• The valve disc shall be the same material as the valve body. It is supported by laminated seal ring, which is kept in place by seat retainer ring bolted to the disc and can be replaced easily.• The spiral wound gasket shall be provided between laminated seal ring and disc.
• The seal ring shall be resilient stainless steel lamella alternated by graphite, aramid fiber & cermic fiber layers.• The surface contacting between seal ring and body seat is an inclined cone type and the inclined angle generates a slight wedging effect.• With a seat retainer ring bolted to the disc, the seal ring is fixed to disc not too tightly to be replaced easily.
• The stem shall be stainless steel and one piece & two pieces construction.• The stem shall be fixed to the disc by pin or in combination of pin and key. It can be protected by internal thrust bush and bush bearing.• The thrust bush and bush bearing shall be provided to locate the valve disc in a proper position.• The retainer ring shall be installed to avoid blowing out the stem.
• The packing shall be consist of two braided rings in the top and bottom of valve and three die formed graphite rings in the middle.• The lantern ring may be provided as required by customer.
• All valve shall be self-locking manual gear operation type which is served as standard.• Electric, pneumatic or hydraulic actuator may be provided as required by customer.
BODY
BODY SEAT
DISC
SEAL RING (LAMINATED)
STEM
PACKING
ACTUATORS
PK_84PK_88
THRUST BUSH
SEAT RING
316SS+Graphite Laminated
SPIRAL WOUND GASKET
316SS+Graphite316SS+Nitr
SEAT RING (Solid metal)
RETAINER RING
SEAT RETAINER
SEAT RING
SPIRAL WOUND GASKET
SEAT RETAINER BOLTDISCBODY SEAT
BODY
BUSH BEARING
PACKING (BRAIDED)
PACKING (FLEXIBLE GRAPHITE)
STEM
ACTUATOR
PK_85PK_89
• NOTE1. Nitr : Hardened by Nitriding, HCr : Hard Cr. Plating, ENP. : Electroless Nickel Plating2. CLASS 150 & 300 : 316 SS Faced & Integral CLASS 600 & OVER : STELLITE NO.6 Faced3. RECOMMEND SPARE PARTS : PART NO.6, 13, 23, 28
STANDARD MATERIAL LIST
MATERIAL ACCORDING TO ASTM
STANDARD
OPTI
ON
NO. PART NAME MATERIAL123456789
1011121314151617181920212223242526272829303132332
13
34
35
40
BODYSEAT SURFACEDISCSTEMRETAINER RINGPACKINGPACKING GLANDGLAND FLANGGLAND BOLTGLAND NUTBUSH BEARINGKEYSEAL RINGTAPER PINYOKEYOKE BOLTYOKE NUTMOUNTING BOLTSPRING WASHERKEYGEAR BOXCAPGASKET(CAP)THRUST BUSHSEAT RETAINERRETAINER BOLTBUSH BEARINGGASKETHANDWHEELCAP BOLTCAP NUTSEAL RING PINSPACERSEAT SURFACE
SEAL RING
LANTERN RINGPLUGGREASE FITTINGDRAIN PLUG
A216 - WCBSTELLITE.6 FacedA217 - CA15A479 - 410A479 - 410GraphiteA576 - 1020 + CrA105 or A576 - 1020(S20C)A193 - B7A194 - 2HA479 - 304 + Nitr.A479 - 410316 SS + GRAPHITE410 SSA576 - 1020(S20C)A193 - B7A194 - 2HA193 - B7 or EQ.STEELA576 - 1045DUCTILEA576 - 1020(S20C) 304 SS + GRAPHITEA479 - 410304SSA193 - B8A479 - 304 + Nitr304 SS + GRAPHITEA53A193 - B7A194 - 2HA479 - 304A479 - 304STELLITE NO.6 FacedDuplex SS + GRAPHITE316 SS + ARAMID316 SS + CERAMICA564 - 630 or 316SS + Nitr.304SSA105CARBON STEEL + Cr. PlatingA105
A217 - WC9STELLITE NO.6 FacedA217 - CA15A479 - 410A479 - 410GraphiteA479 - 410A105 or A576 - 1020(S20C)A193 - B7A194 - 2HA479 - 304 + Nitr.A479 - 410316 SS + GRAPHITE410 SSA576 - 1020(S20C)A193 - B7A194 - 2HA193 - B7 or EQ.STEELA576 - 1045DUCTILEA240 - 304304 SS + GRAPHITEA479 - 410304SSA193 - B8A479 - 304 + Nitr304 SS + GRAPHITEA53A193 - B16A194 - 4A479 - 304A479 - 304STELLITE NO.6 FacedDuplex SS + GRAPHITE316 SS + ARAMID316 SS + CERAMICA564 - 630 or 316SS + Nitr.410 SS410 SS316 SS410 SS
A351 - CF8MSTELLITE.6 FacedA351 - CF8MA564 - 630A479 - 316+HcrGraphiteA479 - 316A351 - CF8A193 - B8A194 - 8A479 - 316 + Hcr. PlatingA564 - 630316 SS + GRAPHITEA564 - 630A576 - 1020 + Zn. PlatingA193 - B8A194 - 8A193 - B7+Hcr or EQ.304 SSA576 - 1045DUCTILEA240 - 316316 SS + GRAPHITEA479 - 316A240 - 316A193 - B8MA479 - 316 + Hcr. Plating316 SS + GRAPHITEA53A193 - B8A194 - 8A479 - 316A479 - 316STELLITE NO.6 FacedDuplex SS + GRAPHITE316 SS + ARAMID316 SS + CERAMICA564 - 630 or 316 S + Nitr.316 SS316 SS316 SS316 SS
PK_86PK_90
TOB VALVE-WAFER TYPE-OUTDRAWING
L1
øC1
n-øh2 HOLD
APP
ROX.
H
H1
H2
ø D2
PK_87PK_91
TOB VALVE - WAFER TYPE
L1
øC1
n-øh2 HOLD
APP
ROX.
H
H1
H2
ø D2
PK_88PK_92
• NOTE1. VALVE DESIGN : ASME B16.342. FACE TO FACE DIMENSION : API 609 (WAFER TYPE)3. END FLANGE DIMENSION : ASME B16.5
TOB VALVES - WATER TYPE - DIMENSIONS UNIT : mm
Inch mm C152.4190.5215.9241.3298.4361.9431.8476.3539.7577.8635.0749.3
h----------
1 1/8-81 1/4-8
a----------
28.631.8
h119.119.122.222.222.225.425.428.628.631.8
--
H252274290320384434520544646663698813
H1228250266296344394470494578595630743
H2142162170179210243287316349381412475
D2200200200200300300400400500500500600
L1165165165165270270335335375375375485
TYPEF07F07F07F07F10F10F14F14F16F16F16F25
C170707070
102102140140165165165254
n444444444448
h29999
1111181822222218
21273235537495
131165230280450
L4854575764718192
102114127154
CLASS 150SIZE FLANGE DIMENSION MOUNTING BASE Weight
(Kg)
Inch34568
10121416182024
mm80
100125150200250300350400450500600
C168.2200.0234.9269.8330.2387.3450.8514.3571.5628.6685.8812.8
h-----
1-81 1/8-81 1/8-81 1/4-81 1/4-81 1/4-81 1/2-8
a-----
25.428.628.631.831.831.838.1
h122.222.222.222.225.4
-------
H252274310375450499562616676711796914
H1228250295336400449497551606641721837
H2142162170199227265302328367402432530
D2200200300300400400500500600600700700
L1165165270270335335375375485485520515
TYPEF07F07F10F10F14F14F16F16F25F25F30F30
C17070
102102140140165165254254298298
n444444448888
h299
11111818222218182222
2127384572
135148208298382450680
L48545959738392
117133149159181
CLASS 300SIZE FLANGE DIMENSION MOUNTING BASE Weight
(Kg)
Inch34568
1012
mm80
100125150200250300
C168.2215.9266.7292.1349.2431.8488.9
h---
1-81 1/8-81 1/4-81 1/4-8
a---
25.428.631.831.8
h122.225.428.6
----
H289370405420490545630
H1249320355370425480560
H2148180195225225310330
D2200300400400500500600
L1270335335335375375485
TYPEF07F10F14F14F16F16F25
C170
102140140165165254
n4444448
h29
111818222218
29385575
136200295
L54647878
102117140
CLASS 600SIZE FLANGE DIMENSION MOUNTING BASE Weight
(Kg)
※NOT SPECIFIED CLASS AND SIZE, PLEASE CONTACT TO SALES DEPARTMENT
34568
10121416182024
80100125150200250300350400450500600
PK_89PK_93
TOB VALVE-LUG TYPE
L1
øC1
n-øh2 HOLD
APP
ROX.
H
H1
H2
ø D2
ø L
PK_90PK_94
• NOTE1. VALVE DESIGN : ASME B16.342. FACE TO FACE DIMENSION : API 609 (LUG TYPE)3. END FLANGE DIMENSION : ASME B16.5
TOB VALVES - LUG TYPE - DIMENSIONS UNIT : mm
CLASS 150SIZE FLANGE DIMENSION MOUNTING BASE Weight
(Kg)
CLASS 300SIZE FLANGE DIMENSION MOUNTING BASE Weight
(Kg)
CLASS 600SIZE FLANGE DIMENSION MOUNTING BASE Weight
(Kg)
※NOT SPECIFIED CLASS AND SIZE, PLEASE CONTACT TO SALES DEPARTMENT
Inch34568
10121416182024
mm80
100125150200250300350400450500600
C152.4190.5215.9241.3298.4361.9431.8476.3539.7577.8635.0749.3
h5/8-115/8-113/4-103/4-103/4-107/8-97/8-9
1-81-8
1 1/8-81 1/8-81 1/4-8
a15.815.819.119.119.122.222.225.425.428.628.631.8
n148888
12121216162020
H252274290320384434520544643660695813
H1228250266316344394470494578595630743
H2142162170179208241267316349381412475
D2200200200200300300400400500500500600
L1165165165165270270335335375375375485
TYPEF07F07F07F07F10F10F14F14F16F16F16F25
C170707070
102102140140165165165254
n444444444448
h29999
1111181822222218
233036395983
110153193258318507
L4854575764718192
102114127154
Inch34568
10121416182024
mm80
100125150200250300350400450500600
n1888
121216162020242424
H252274319375450499562616616711798914
H1228250295336400449497551606641721837
H2142162170199227265302328367402432530
D2200200300300400400500500600600700700
L1165165270270335335375375375485520515
2432445283
151172249352449534812
L48545959738392
117133149159181
C168.2200.0234.9269.8330.2287.3450.8514.3571.5628.6685.8812.8
h3/4-103/4-103/4-103/4-107/8-9
1-81 1/8-81 1/8-81 1/4-81 1/4-81 1/4-81 1/2-8
a19.119.119.119.122.225.428.628.631.831.831.838.1
TYPEF07F07F10F10F14F14F16F16F25F25F30F30
C17070
102102140140165165254254298298
n444444448888
h299
11111818222218182222
Inch34568
1012
mm80
100125150200250300
n144488
1216
32456788
157237343
L54647878
102117140
C168.2215.9266.7292.1349.2431.8488.9
h3/4-107/8-9
1-81-8
1 1/8-81 1/4-81 1/4-8
a19.122.225.425.428.631.831.8
H289370405420490545630
H1249320355370425475560
H2150181210223255309330
D2300400400400500600600
L1270335335335375485485
TYPEF10F14F14F14F16F25F25
C1102140140140165254254
n4444488
h211141818221818
PK_91PK_95
TOB VALVE - DOUBLE FLANGE TYPE
L1
øC1
n-øh2 HOLD
APP
ROX.
H
H1
ø Dø g
H2
L
tt1
ø D2
PK_92PK_96
• NOTE1. VALVE DESIGN : ASME B16.342. FACE TO FACE DIMENSION : ISO 5752 (SHORT TYPE)3. END FLANGE DIMENSION : ASME B16.5
TOB VALVES - DOUBLE FLANGE(SHORT) TYPE - DIMENSIONS UNIT : mm
Inch34568
10121416182024
mm80
100125150200250300350400450500600
D191229254279343406483533597635699813
g127.0157.2185.7215.9269.7323.9381.0412.8469.9533.4584.2692.2
C152.4190.5215.9241.3298.4361.9431.8476.3539.7577.8635.0749.3
t19.124.024.025.428.530.331.835.136.639.743.047.8
h5/8-115/8-113/4-103/4-103/4-107/8-97/8-9
1-81-8
1 1/8-81 1/8-81 1/4-8
a15.815.819.119.119.122.222.225.425.428.628.631.8
n148888
12121216162020
h119.119.122.222.222.225.425.428.628.631.831.835.1
H252274319340384434520544643660695813
H1228250295316344394470494578595630743
H2142162170179208241267316349381412473
D2200200200200300300400400500500500600
L1165165165165270270335335375375375485
TYPEF07F07F07F07F10F10F14F14F16F16F16F25
C170707070
102102140140140165165254
n444444444448
h29999
1111181822222218
273541456897
133188238302380599
L114127140140152165178190216222229267
CLASS 150SIZE MOUNTING BASE Weight
(Kg)FLANGE DIMENSION
Inch34568
10121416182024
mm80
100125150200250300350400450500600
D210254279318381445521584648711775914
g127.0157.2185.7215.9269.7323.9381.0412.8469.9533.4584.2692.2
C168.2200.0234.9269.8330.2387.3450.8514.3571.5628.6685.8812.8
t28.531.835.036.641.247.850.853.957.260.563.569.9
h3/4-103/4-103/4-103/4-107/8-9
1-81 1/8-81 1/8-81 1/4-81 1/4-81 1/4-81 1/2-8
a19.119.119.119.122.225.428.628.631.831.831.838.1
n1888
121216162020242424
h122.222.222.222.225.428.631.831.835.135.135.141.2
TYPEF07F07F10F10F14F14F16F16F25F25F30F30
C17070
102102140140165165254254298298
n444444448888
h299
11111818222218182222
27355263
101176210315440558670
1025
L114127140140152165178190216222229267
CLASS 300SIZE MOUNTING BASE Weight
(Kg)FLANGE DIMENSION
H252274319375450499562616616711798914
H1228250295336400449497551606641721837
H2142162170199227265302328367402432530
D2200200300300400400500500600600700700
L1165165270270335335375375485485520515
Inch34568
1012
mm80
100125150200250300
D210273330356419508559
g127.0157.2185.7215.9269.7323.9381.0
t31.838.144.547.855.763.566.6
n1888
12121620
TYPEF07F10F14F14F16F16F25
C170
102140140165165254
n4444448
h29
111818222218
375586
109192296421
L180190200210230250270
CLASS 600SIZE MOUNTING BASE Weight
(Kg)FLANGE DIMENSION
h122.225.428.628.631.835.135.1
C168.2215.9266.7292.1349.2431.8488.9
h3/4-107/8-9
1-81-8
1 1/8-81 1/4-81 1/4-8
a19.122.225.425.428.631.831.8
H289370405420490545630
H1265330355370425480560
H2148180195225255310330
D2200300400400500500600
L1165270335335375375485
※NOT SPECIFIED CLASS AND SIZE, PLEASE CONTACT TO SALES DEPARTMENT
PK_93PK_97
UNIT : mmSIZEØdL
H1H2H3P
ØW
2 1/26546
139.74-Ø19
7516775
170150
38048
152.44-Ø19
8317775
170150
410054
190.58-Ø19
9419575
170150
512556
215.98-Ø22.3
9521875
170150
615057
241.38-Ø23
12723775
170150
FLANGERATING
ØCn-Øh Dr.
DIMENSION AND WEIGHT
P
øWH3
n- øh Dr.
øCH2
H1
DISC
SEAT
BODY RETAINER
High-Performance Type Butterfly Valve- Extention of seat durablity for double eccentricity (metariallzation row abrasion of seat)- Easy changing seat and parts due to standard for all structures (reduce maintenance cost)
DOUBLE ECCENTRIC TYPE
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL123456789
10111213141516
BODYDISCSEATSHAFTRETAINER BOLTUPPER BUSHLOWER BUSHRETAINERDISC PINPACKING GLANDPACKINGEND COVERGASKETBRACKETGEAR BOXHAND WHEEL
A216 WCBA351 CF8PTFEA276 304A193 Gr. B8316S.S+PTFE316S.S+PTFEA240 304A276 304B584C83600TEFLONA36GRAPHITEA36ASS’YA126CLB
A351 CF3MA351 CF3MPTFEA276 316LS.S 316L316S.S+PTFE316S.S+PTFEA240 316LA276 316LB584C83600TEFLONA240 316LGRAPHITEA36ASS’YA126CLB
B148 C95800B148 C95800PTFEA276 316A193 Gr. B8M316S.S+PTFE316S.S+PTFEA240 316A276 316B584C83600TEFLONB148C95800GRAPHITEA36ASS’YA126CLB
PK_94PK_98
UNIT : mmSIZEØdL
H1H2H3P
ØW
820064
298.58-Ø22.3
-196295100200250
1025071
362.012-Ø25.4
-237337100200250
1230081
431.812-Ø25.4
-264360100200250
FLANGERATING
ØCn-Øh Dr.n-h TAP
1435092
476.3-
12-1”305331109270310
16400102
539.7-
16-1”345461109270310
18450114
577.9-
16-1 1/8”372489126290390
20500127
635.0-
20-1 1/8”420565126290390
22550154
692.1-
20-1 1/4”440628142330390
24600154
749.3-
20-1 1/4”471654142330390
DIMENSION AND WEIGHT
P
øWH3
n- øh Dr.
øCH2
H1
DISC
SEAT
BODY RETAINER
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL123456789
10111213141516
BODYDISCSEATSHAFTRETAINER BOLTUPPER BUSHLOWER BUSHRETAINERDISC PINPACKING GLANDPACKINGEND COVERGASKETBRACKETGEAR BOXHAND WHEEL
A216 WCBA351 CF8PTFEA276 304A193 Gr. B8316S.S+PTFE316S.S+PTFEA240 304A276 304B584C83600TEFLONA36GRAPHITEA36ASS’YA126CLB
A351 CF3MA351 CF3MPTFEA276 316LS.S 316L316S.S+PTFE316S.S+PTFEA240 316LA276 316LB584C83600TEFLONA240 316LGRAPHITEA36ASS’YA126CLB
B148 C95800B148 C95800PTFEA276 316A193 Gr. B8M316S.S+PTFE316S.S+PTFEA240 316A276 316B584C83600TEFLONB148 C95800GRAPHITEA36ASS’YA126CLB
PK_95PK_99
P
LH
3H
2H
1
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL123456789
1011
BODYDISCSEATSHAFTDISC BOLTPACKINGPACKING GLANDGLAND BOLTLEVERINDICATORLEVER BOLT
A216 WCBA351 CF8EPDMA276 410A193 B8NBRA36A193 B7A36A36A193 B7
A351 CF3MA351 CF3MVITONA276 316LS.S 316LVITONA240 316A193 B8MS.S 304S.S 304A193 B8M
B148 C95800B148 C95800EPDMMONEL K500MONEL K500NBRA240 316A193 B8MS.S 304S.S 304A193 B8M
UNIT : mmSIZE
LH1H2H3P
WEIGHT(Kg)
24358
13034
2334.5
2 1/24665
14234
2335.5
34678
15034
2626.0
45293
16334
2626.5
556
11617634
2628.5
656
12818534
26210
DIMENSION AND WEIGHT
CONCENTRIC TYPERubber Seat Butterfly Valve (Concentric Design)- We intend from ceaseless technical development effort to zero leakage ratio and minimize valve torque. We manufacture to be used on optimum condition to various actuator of "pneumatic"etc.
PK_96PK_100
L
E
P
øW
H3
H2
H1
UNIT : mmSIZE
LH1H2H3PE
ØMWEIGHT(Kg)
24358
13029
15044
1506.5
2 1/24665
14229
15044
1507.0
34678
15029
15044
1507.5
45293
16329
15044
1508.5
556
11617629
15044
15010.5
656
12818529
15044
15011.5
860
15523045
20065
25015.5
1068
23126736
20065
25031
1278
26731036
20065
25042
1478
29733845
27080
31050
1610233237545
27080
31093
1811435039045
27080
310110
2012739442255
29085
390165
2215443046055
29085
390230
2415445549565
330103390300
DIMENSION AND WEIGHT
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL123456789
1011121314
BODYDISCSEATSHAFTDISC BOLTPACKINGPACKING GLANDGLAND BOLTEND COVEREND COVER BOLTGASKETGEAR BOXHANDLEGEAR BOX BOLT
A216 WCBA351 CF8EPDMA276 410A193 B8NBRA36A193 B7A36A193 B7GRAPHITEASS’YA126 BA193 B7
A351 CF3MA351 CF3MVITONA276 316LS.S 316LVITONA240 316A193 B8MA240 316LA193 B8MGRAPHITEASS’YA126 BA193 B8M
B148 C95800B148 C95800EPDMMONEL K500MONEL K500NBRA240 316A193 B8MB148 C95800A193 B8MGRAPHITEASS’YA126 BA193 B8M
PK_97PK_101