TRIMAX Livestock Trailers - 11-2016 - EN.pdf · The TRIMAX-S evolution forms a wide range of...

www.leboulch.com

Meadow Harrows

Livestock and pasture care brochure

Livestock Trailers

AERO / REGENERO / REGENERO ~FLEX

TRIMAX

Quality and Tradition!

Route de Guernanville, 27330 LA VIEILLE LYRE - FRANCE • tel.: +33 (0)2 32 30 67 47 - fax: +33 (0)2 32 30 59 93 • [email protected] • www.leboulch.com

ref.

: 209

8760

079-

16-E

N

The new TRIMAX-P evolution forms a wide range of livestock trailers from 5.25 to 10.05 m that differ from the reclining version by the use of a ramp. This ramp is designed to have a very small loading and unloading angle, in order to reduce the risks when handling the livestock, and is standard fitted with a return spring for an easy lifting, which can be replaced, as an option, by a hydraulic ram to avoid any effort. The steps to access the ramp and between the ramp and the body are limited to a few centimeters only. It is made up of a treated wooden floor with slats with limited height to prevent the livestock from slipping or tripping, as well as of a galvanized steel frame supporting the whole, so as to make it stable and rigid. Painted in a neutral colour without reflections, the TRIMAX livestock trailer will make your livestock feel comfortable and will calm it down.

TRIMAX-Pevolution

MORE INFORMATION IN OUR TABLE PAGE 6

TRIMAX-P 6350S MODEL

Livestock Trailers

Leboulch / 2

The TRIMAX-S evolution forms a wide range of livestock trailers from 5.25 to 10.05 m covered with a quality paint for a long service life. They are fitted with a reclining system allowing to lower the rear side of the vehicle to load the animals more easily. In addition, they are manufactured so as to ensure a great comfort of the animals, in order to prevent injuries and stress (e.g.: high and wide wheel recesses so that the animal cannot get injured when falling on them), and can be fitted with a varied choice of tyres suitable for transport. Finally, they are painted in a neutral colour without reflections, which makes your livestock feel comfortable and calm it down.

TRIMAX-Sevolution


TRIMAX-S 8050D MODEL

Livestock Trailers

Leboulch / 3

Your livestock made up its

choice!

Leboulch / 4

TRIMAX-P TRIMAX-S

RECLINING SYSTEMReclining system with the rear side of the livestock trailer that can be lowered to easily load the animals. Body floor: 14 cm above the ground with a 4 cm inner edge for sanitary reasons. Doors opening on the whole width.

SUSPENSIONSuspension with nitrogen accumulators and safety valve on models 8050D and 10050D.

INNER PARTITIONS3 types of inner partitions: 1-part fences, the fixed partition with 2 leaves and the door on rail. They are all three fastened to tubes that are standard mounted along the body walls.

TUBULAR PARTITIONAn easy but still efficient partition to divide your animals of a certain size.Easy to maintain and resistant to shocks, the tubular partition meets the safety requirements regarding animals.

INCREASED STABILITYVehicle standard fitted with large size tyres with radial casing for a better stability, less damage to the meadows, an easier traction on wet soil, as well as more resistance to the load.

STRENGTHReinforcements on the sides and at the bottom of the body, smooth side walls (3 mm) and floor in chequered plate (3.5 mm), 2 drain plugs, angle-reinforced body arches.

PRE-EQUIPMENT FOR COVERPre-equipment to cover the body.

INTUITIVE HANDLINGSliding fences on rail for a perfect handling ease.

NON-SLIP RAMPRamp designed to have a very small loading and unloading angle in order to significantly reduce the risks when handling livestock. Anti-slip ramp (slats) that can be lifted with "the tip of the fingers".

OUR +:

Leboulch / 5

Tyres

Options

Dim

ensions

Trimax-P 5250S

Trimax-P 6350S

Trimax-P 8050D

Trimax-P 10050D

Trimax-S 5250S

Trimax-S 6350S

Trimax-S 8050D

Trimax-S 10050D

Dimensions of outer fences (m) 3.1 / 4 3.1 / 4 / 4.5 3.1 / 4 / 4.5 3.1 / 4 / 4.5 3.1 / 4 / 4.5 3.1 / 4 / 4.5 3.1 / 4 / 4.5 3.1 / 4 / 4.5

Length and width of rear ramp (m) 1.35 / 2.29 1.35 / 2.29 1.93 / 2.29 1.93 / 2.29 Reclining Reclining Reclining Reclining

Inner width and length (m) 2.23 / 5.25 2.23 / 6.35 2.23 / 8.05 2.23 / 10.05 2.23 / 5.25 2.23 / 6.35 2.23 / 8.05 2.45 / 10.05

Overall width (m) 2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55

Resin floor thickness (mm) ~10 ~10 ~10 ~10 ~10 ~10 ~10 ~10

Number of adult bovines that can be transported 8/9 12/13 13/14 14/15 8/9 12/13 13/14 14/15

Permissible max. weight (t) 7.1 9.6 15.4 17 7.1 9.6 15.4 17

Brake dimensions Number of studs

350x608

350x608

350x608

350x608

400x808

400x808

400x808

400x808

Side and rear door opening width (m) 0.78 / 2.13 0.78 / 2.13 0.78 / 2.13 0.78 / 2.13 0.78 / 2.13 0.78 / 2.13 0.78 / 2.13 0.78 / 2.13

Axle track Wheelbase

2,0000

2,0000

2,0001,200

2,0001,200

2,0660

2,0660

2,0661,020

2,0661,020

Hitching axis - axle distance (m) 4,964 5,760 6,733 7,673 4,964 5,415 6,822 7,763

max. Ø of wheel recess (mm) 940 940 940 940 940 1090 940 940

Cover weight (g/m2) 680 680 680 680 680 680 680 680

Reclined position (cm) Road position (cm)

/63

/63

/63

/63

1463

1463

1463

1463

Height of side walls (m) 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Non-slip floor covering X X X X X X X X

Non-slip ramp covering X X X X

Hydraulic stand X X standard standard X X standard standard

Cover not mounted for transportation X X X X X X X X

Polyethylene box X X X X X X X X

Stick holder X X X X X X X X

Multi-position inner partition - 1 tubular leaf X X X X X X X X

Inner partition sliding on the whole length - 1 leaf made of steel sheet with no-return security X X X X X X X

Fixed inner partition - 2 leaves made of metal sheet X X X X X X X X

385/65R22.5 - 8 holes - retread standard standard

295/60R22.5 - 8 holes - retread X X X X

305/55R22.5 - 8 holes - retread X X X X X X X X

435/50R19.5 - 8 holes - retread standard X standard standard standard X standard standard

435/50R19.5 - 8 holes - double coin X X X X X X X X

435/50R19.5 - 8 holes - Goodyear X X X X X X X X

445/45R19.5 - 8 holes - retread X X X X X X X X

Leboulch / 6

AERO

The AERO is a 3 in 1 high-tech implement: it allows to spread

molehills and dung, as well as to aerate the meadow in 1

single passage! It is thus the best compromise between a

dung spreading harrow, an aerator and a weed harrow.

With this implement, your meadows will be well aerated, will

breathe better and will have a better water infiltration in case

of rain. 8 models are available for a working width between

2.4 and 6.6 m.Manufactured in special steel • Galvanized machine (structure and tools) • Shot-blasted and painted blades in treated steel (2 paint coats) • Flexible hitching (spring) • Adjustable aerators • Roto seeder as an option


SPREADS DUNG / MOLEHILLS

REMOVES MOSS

SCARIFIES / HARROWS

LEVELS / FLATTENS

Flexible tines10 cm spreading paddles on very flexible leaves

60 cm leveling scrapers on half-

flexible leavesNumber of rows Different tools

2 rows 1 row 1 row 4 3

Leboulch / 7

REGENERO

As its name suggests, the aim of this range is to regenerate

meadows, i.e. to stimulate the natural biological activity of

the ground in order to boost the growth of a forage that is

denser and of better quality. This REGENERO range allows

you to choose among 5 models from 2.4 m to 7.2 m. It carries

out 3 functions in 1 passage: scarification, regeneration,

moss removal and molehill spreading. The leveling blades

and knives will skillfully flatten the relief, remove molehills

and spread dung, while the scarifying shares carry out a

rather aggressive scarifying and moss removal work in order

to regenerate the damaged meadows. This fully galvanized

implement is designed to last.


Scarifying shares Scraper blades 25° leveling

blades Number of rows Different tools


REMOVES MOSS

SCARIFIES / HARROWS


REGENERATES

LEVELS / FLATTENS

Reinforced frame with extension guides • Reinforced and adjustable depth wheels • Spring-mounted 3rd point • Hydraulic folding • Depth adjustment of the scarifier through spring-mounted 3rd point • Standard galvanization (frame & blades)

Leboulch / 8

REGENERO ~FLEX

Made up of a spreading system for dung and molehills,

followed by a scarifier and a manure spreading harrow, the

REGENERO~FLEX is aiming at a gentler and more precise

work. Its three last rows of long enough curved tines allow to

properly follow the ground unevenness and are particularly

efficient to remove dead grass, moss and other undesirable

elements. It is however not the only thing they do: they also

perfectly crumble molehills that were first leveled by the

blades, in order to favour a dense, rapid and homogeneous

grass growth. This fully galvanized implement is designed

to last.


Flexible tines Scraper blades 25° leveling blades Number of rows Different tools


REMOVES MOSS

REGENERATES

SCARIFIES / HARROWS


LEVELS / FLATTENS

Reinforced frame with extension guides • Reinforced and adjustable braking wheels • Spring-mounted 3rd point • Standard galvanization (frame & blades) • Roto seeder as an option

Leboulch / 9

240 300 360 420 480 540 600 660

2.4 3.0 0.6 + 2.4 + 0.6 0.6 + 3.0 + 0.6 1.2 + 2.4 + 1.2 1.2 + 3.0 + 1.2 1.8 + 2.4 + 1.8 1.8 + 3.0 + 1.8

Weight (kg) 300 355 440 500 680 755 805 820

Working width (m) 2.40 3.00 3.60 4.20 4.80 5.40 6.00 6.60

Folding of the extensions / / manual manual 2 rams 1 hydr. ram 2 hydr. rams 1 hydr. ram

240 400 500 600 720

2.4 0.8 + 2.4 + 0.8 1.3 + 2.4 + 1.3 1.8 + 2.4 + 1.8 2.4 + 2.4 + 2.4

Weight (kg) 500 1000 1,100 1,300 1,600

Working width (m) 2.40 4.00 5.00 6.00 7.20

Hydraulic folding of the extensions / 1 double-act-

ing hydr. ram1 double-act-ing hydr. ram

1 double-act-ing hydr. ram


240 500 600 720

2.4 1.3 + 2.4 + 1.3 1.8 + 2.4 + 1.8 2.4 + 2.4 + 2.4

Weight (kg) 500 1,100 1,300 1,600

Working width (m) 2.40 5.00 6.00 7.20

Hydraulic folding of the extensions / 1 double-act-

ing hydr. ram 1 double-act-ing hydr. ram


REGENERO pasture renovators

REGENERO ~FLEX pasture renovators

AERO aerators

Leboulch / 10

1958, 1200 m2 of extra buildingsResearch and development 1921, birth of the Leboulch brandAssembly workshop

QUALITY Modern tools, continuous innovation

TRADITION 80 years of know-how

Since 1921 and the first wooden agricultural cart trailed by horses, Leboulch has gained experience and know-how so

as to have influence in France and abroad regarding the manufacturing of agricultural trailers and vehicles.

With 80 years of technological evolutions since the first factory built in 1936, Leboulch proposes now the modernest machines, such a the Evolupro muck spreader or the Gold

XXL monocoque tipping trailer.

&

Leboulch was able to impose its brand in the modern agriculture: thousands of tipping trailers, spreaders, bale trailers, low loaders, trailers and livestock trailers have

already been manufactured in La Vieille-Lyre (Normandy) and sold in whole Europe.

It is a strong industrial group providing customized and flexible services thanks to its standardized manufacturing, its modern production processes and its internal research

department.

Visit our premises upon simple request

Leboulch / 11

www.leboulch.com

Route de Guernanville, 27330 LA VIEILLE LYRE - FRANCE • tel.: 0800 002 373 - fax: +33 (0)2 32 30 59 93 • [email protected] • www.leboulch.com

Discover a multitude of products meeting your needs:

Livestock and pasture care brochure

TIPPING TRAILERSGold XL, Gold XXL, EVII

LIVESTOCK TRAILERSTrimax-P, Trimax-S

MEADOW AERATORSRegenero, Regenero ~flex, Aero

MUCK SPREADERSHVS, Goliath, Evolupro, Evolufarm

HAUSWIRTHbale trailers, low loaders

TANKEROptima

©Le

boul

ch 2

016.

Non

-con

trac

tual

doc

umen

t. D

ata

can

chan

ge w

ithou

t not

ice.

The

pic

ture

s do

not

nec

essa

ry c

orre

spon

d to

sta

ndar

d eq

uipm

ent.

TRIMAX Livestock Trailers - 11-2016 - EN.pdf · The TRIMAX-S evolution forms a wide range of...

Documents

Transcript of TRIMAX Livestock Trailers - 11-2016 - EN.pdf · The TRIMAX-S evolution forms a wide range of...