Tried simplicity, proven performance and high comfort –Models Line-up TC, What’s new 2015? ......

TC

Tried simplicity, proven performance and high comfort

• New naming– TC4 : 4 straw walkers

– TC5 : 5 straw walkers

• New T4.90– High spec 4 straw walkers

• Harvest Suite Comfort Cab

• Remote threshing drum concave

• Double cascade cleaning shoe

• Bigger clean grain

• Bigger grain tank, from 4000 to 5000 litres

• NEF engine 6 cylinder, Tier4a

– Many options:

• Rotary separator

• SmartSieve™ with Opti-Fan™

• Moisture sensor

• 2013: 50000th TC built

TC – Models Line-up

TC, What’s new 2015?

MY 2014 MY2015

TC5040 Tier 3 TC5040 Tier 3

TC5050 Tier 3 TC4.90 Tier 3/4A

TC5060 Tier 3 TC5.70 Tier 3/4A

TC5070 Tier 3/4A TC5.80 Tier 3/4A

TC5080 Tier 3/4A TC5.90 Tier 3/4A

TC5080 HS Tier 3/4A TC5080 HS Tier 3/4A

TC – Models line-up

A brand new range

TC5040(mechanical)

TC4.90 TC5.70 TC5.80 TC5.90TC5080 Hillside

Header width(m)

High cap / VF HD

3,96 – 5,18/

N/A

3,96 – 5,18/

N/A

3,96 - 5.18/

N/A

3,96 - 6.10/

4,90 - 5,50

3,96 - 6.10/

4,90 - 5,50

3,96 - 6.10/

N/A

Nber of straw walkers 4 5

Cleaning area under

wind control3,27m² 3,47m² 4,32m²

Engine type

(displacement)

NEF (6,8 l)

Mechanical

NEF (6,8 l)

Mechanical

NEF (6,8 l)

Mechanical

NEF (6,8 l)

Common

Rail

NEF (6,8 l)

Common

Rail

NEF (6,8 l)

Common

Rail

Power at 2100 RPM

(hp [CV]/kW)170/125 170/125 170/125 207/152 241/177 238/175

Power at 2000 RPM

(hp [CV]/kW)175/129 175/129 175/129 231/170 243/179 258/190

Grain tank capacity

(liters)4000 5000 5200 6400 5200

Type of cab Standard Harvest Suite™ Comfort Cab Standard

TC – Feeding

Fit all header types

• Manual control– Three accumulators = pneumatic compensation

– Pressure and stubble height read thanks to a manometer and a mechanical gauge

• Controlfloat™ technology– This configuration offers automatic header

height control for headers in flat areas.

– This system offers four working modes:

• Manual, used for road transportation

• Stubble height based on elevator angle, mostly used in rape or maize

• Selected height based on the skids position for all normal standing crops

• Pressure compensation for laid crops

• Autofloat™II system– Allows the header to stay perfectly parallel to

the ground even in strong rolling area.

– AutoFloat = Controlfloat + Lateralfloat

– This system offers the same four modes as Controlfloat

TC – Feeding

Header height control

Systems ManualControl-

float™

Auto-

float™II

TC5040 Standard N/A N/A

TC4.90 N/A Standard N/A

TC5.70 N/A Standard N/A

TC5.80 N/A Standard Option

TC5.90 N/A Standard Option

• Up/down hill control– Senses the combine’s angle of ascent or descent and automatically adjusts the hydraulic pressure of the

header lift system

• AutoFloat I: Delta pressure (∆ P) varies: • Downhill ∆ P becomes too small, header tends to lift out of the crop

• Uphill ∆ P becomes too big, header tends to bulldoze.

• AutoFloat II: Delta pressure (∆ P) is maintained constant.• At flat, downhill or uphill harvest the header maintains the same pressure on the ground.

TC - Feeding

AutoFloat™II, For all terrain

TC – Threshing and separation

Threshing system on demand

• Stones eliminated thanks to the drum inertia

– The stones are pushed by the drum slats in the V shape stone trap .

– The stone trap: is the ultimate protection for the threshing system.

• Stone trap easy access– Easy and fast cleaning of stone trap with

“over-centre” lever

– Self cleaning V-shaped stone trap: thanks to the ‘Cleaning Assist Tube’

• Access to the grain pan– This access is useful especially during the

maize season to clean the grain pan from the front


Threshing system well protected from stones

• Best in class threshing drum– Heavy and large diameter (606mm)

• Allows for larger quantity of crop to be harvested

– More inertia

• High resistance of peaks of load

• Less force applied on driveline

• Regular crop flow

• Concave clearance remote control– Easy control from cab of the drum/concave

clearance

– Clearance Indicated on the monitor

• Wrap angle 111°– Important friction area:

• TC 4 : 0,62m²

• TC 5 : 0.79m²


High diameter threshing drum

TC 4 TC 5

Drum concave 0,62m² 0,79m²

Beater concave 0m² 0m²

Straw-walkers 4,41m² 5,51m²


WITHOUT Rotary separator

• High straw quality even in dry conditions

– The perfect solution in dry and gentle straw conditions

– Big diameter threshing drum for optimal straw quality

– Beater for transition to straw walkers and gentle treatment of straw

• Closed bottom straw-walkers– Long straw walkers with a steep slope and 6

steps for optimal separation

– More rigidity thank to the structure of the SW

– Separated grain remain on the same side even in lateral slope, the grain is evenly spread over the grain pan;

• Threshing and separation area:

• +20% capacity – Maximise the separation capacity

• Efficient even in the worth conditions.

• Adjustable Rotary Sep. concave– Upper position: maximum capacity

– Lower position: brittle straws or rapeseed

• Two RS speeds– 390 rpm: Rapeseed, sunflower, maïs

– 740 rpm: Cereals


WITH Rotary separator (Not Available on TC5040 and TC5050)

Threshing and

separation areaTC 4 TC 5

Drum concave 0,62m² 0,79m²

Beater concave 0,16m² 0,2m²

RS concave 0,66m² 0,83m²

Straw-walkers 3,74m² 4,68m²

TC – Cleaning

The cleanest grain sample around!

• Long grain pan – Increase the density sorting

• Lighter material on top

• Heavier material below

– Material perfectly prepared to the cascade

• Alternated sieves movement– Avoid crop building up over sieve (especially in

barley)

• Sieve area– 3,27m²

• TC –

Cleaning

TC – Cleaning

TC5040: Single cascade cleaning system

• Double cascades under wind control

• 20 to 40% of grain clean from the pre-sieve

• Long upper sieve

• Fixed or SmartSieve™

• Optional sieve opening remote control

TC 4 TC 5

Sieve area

under wind

control3.457m² 4,321m²

TC – Cleaning

The right cleaning area

• Sieve opening remote control – Optional on TC5060, TC5070 and TC5080

– The upper and lower sieves can be controlled from to different locations:

• From cab on the RHS console

• Directly from the rear of the combine

– The sieve opening value appears directly on the InfoView™II monitor

TC – Cleaning

Cleaning process controlled at your fingertips

• Efficient in side slopes up to 25%

• Upper shoe movement– Pre-sieve

– Upper sieve

• Linear movement of the sieves– On level ground, the sieves move in-line with

the combine chassis behaving just like a fixed cleaning shoe

• Grain kernel size correction– Depending on the fan rpm, the side

movement is more or less aggressive

– The optimal levelling correction is obtained by taking these two elements into account

• The weight of the grain is define thank to the cleaning fan rpm with three speed ranges

• The side slope is determinate by the inclinometer located in the cab

TC – Cleaning

SmartSieve™ technology efficient up to 25% side slope

• Higher performance in rolling fields (Only on SmartSieve cleaning shoe)– When longitudinal slope changes, fan rpm is adapted with a delta in direct relation to the change in

slope

• Fan rpm is automatically increased when driving downhill to avoid cleaning system overload and improve the grain sample quality

• Fan rpm is automatically reduced when driving uphill to avoid grain losses

– Result: Opti-Fan™ system ensure automatically a constant grain sample quality and cleaning capacity

TC – Cleaning

Fan rpm compensation Opti-Fan™ for longitudinal hills

TC – Grain handling

The right autonomy

• Foldable covers in two parts– On TC5.70, TC5.80 and TC5.80 only

– Easy to operate from the cab platform

– Lower overall height for transport

• Sample trap

• Grain level sensor

• Unload rate of 60l/s

TC – Grain handling

Up to 6400 litres

Models

Grain

tank

capacity

Comp.

to

MY’14

CoversLevel

sensor

TC5040 4000 L = Single 1

TC4.90 5000 L +25% Single 1

TC5.70 5200 L = Single 1

TC5.80 6400 L = Double 2

TC5.90 6400 L = Double 2

TC – Residue management

Long or chopped straw, the choice is yours

• Electro-hydraulic clutch to engage chopper

– The operator just need to:

• Move the lever of the swathing plate (1)

• Press the engagement button on the RHS console to enable or disable the straw chopper


Easy switch from swathing to chopping

1

• Adjustable rakes– The rakes on each side can be adjust

• The windrow width can be change according to the amount of straw

• Easy setting

• Optional chaff spreader– Spread the straw on the full header width

• Avoid excessive chaff volume under the straw windrow

• Improve the start of the following crop especially when the plough is not used.

– The chaff spreader can be moved backward to get an easy access to the sieves


Swathing mode

• Efficient chopping – Space between knives 25mm

– Two speeds available : 2400 – 3400 rpm

• Lateral wind compensation – Available as an option

– Straw deflectors controlled from cab

– The chopped straw is evenly spread

• Dual-Chop™ rake– Installed into the straw chopper from factory

– Finer cut without extra fuel consumption


Straw chopping mode

TC – Engine and drives

Simply reliable

• TC – Engine

and drives

TC5040 TC4.90 TC5.70 TC5.80 TC5.90

Fuel

tank

capacity

300L 400L

AdBlue®

tank

capacity

N/A 70L


Two engine technologies

• TC5040– Engine NEF 6,8 litres displacement

– Mechanical governor

– Internal gas recirculation system

• TC4.90, TC5.70, TC.80 and TC5.90– Engine NEF 6,8 litres displacement

– High pressure common rail injection

– Optional air compressor available

• Diff Lock– Optional on TC5.80-TC5.90

– Improved the ground drive in difficult area (hilly fields, humid area…)

– The operator has to push the pedal down to engage the system when the combine starts slipping


Ground drive transmission

TC5040 TC4.90 TC5.70 TC5.80 TC5.90

Gearbox 3 speeds ZF 3 speeds ZF 3 speeds ZF 3 speeds NH 3 speeds NH

Hydro pump N/A 75cc 75cc 75cc 100cc

Hydro motor N/A 75cc 75cc 75cc 100cc

Rim diameter 26 26 26 32 32


Road mode


Get access everywhere

TC - Cab

TC5040, everything under control

• Modern designed right hand console

– Remote controls for header, threshing and unloading and chopper, this option allows to remove the lever on the LHS and replace it with electrical cool box

– Header pressure gauge to ensure header responsiveness

– Grain loss indicators for sieves and straw walkers and return level indication to set the combine efficiently during operation

• Main functions located on the Multi Function Lever

– Header up / down, lateral adjustment

– Header and elevator reverse button

– Unloading tube position controls on the Multi Function lever

TC - Cab

TC5040, All controls at your fingertips

TC – Cab

NEW Harvest suite™ comfort, Exclusively on TC5060, TC5070 and TC5080

• TC – Cab

TC – Cab

Cab at the right position and lower noise level

• Low noise level– 74db

• Cab centered on the frame – The steering column is located in the exact

middle of the combine

• Easier for the operator to follow the harvesting operations

• Same visibility on each side of the header

• No vibrations– Cab is linked to the frame with 4 silent blocs

– The concave clearance rod is no longer crossing the cab floor

• Perfect visibility – The cab platform ladder is foldable toward the

front in road mode

– The RHS window provide a great visibility, the grain tank is no longer obstructing the visibility

• InfoView™II

TC – Cab

Harvest suite™ comfort, designed around the operator

TC – Cab

Don’t miss anything

• RHS Console– 1: Threshing engagement

– 2: Header engagement

– 3: Gear shifting lever

– 4: Drum speed setting

– 5: Drum concave clearance setting

– 6: Fan speed setting

– 7: Upper sieve opening setting

– 8: Lower sieve opening setting

– 9: Straw chopper deflectors Adjustment

– 10: Field/road mode

– 11: Straw chopper engagement

– 12: Reel speed proportional to ground speed

– 13: Header width adjustment

– 14: Header height control

– 15: Engine speed setting

• The console is adjustable fore/rearward

– Suit perfectly to the operator

TC – Cab

Functional settings at your fingertips

4 56

78

9

3

21

1011

12

13

14

15

• CommandGrip™ MFH– 1: Header height and Lateralfloat control

– 2: Unloading auger engagement

– 3: Unloading tube opening

– 4: Emergency stop

– 5: Reel speed/header reverser

– 6: Reel Aft/fore position/VariFeed™ cutter bar

– 7: Not used

– 8: HHC Automatic mode engagement

– 9: Shift (Varifeed™/reverser)

TC – Cab

CommandGrip™: controls at your fingertips

4 5

6

7

8

9

3

2

1

TC – Cab

InfoView™II monitor: complete but not complex (1)

Run screens

Combine status screen

Keypad

Gauges:

- Engine cooling

température

- Fuel level

Alarms:

- 25 alarms : shaft speeds,

levels, temperature…

TC – Cab


Run screens

Keypad

Combine status screen:

- Grain tank level

- Unloading auger position

- Header height control mode:- Autofloat™

- Stubble height

- Compensation

- Reel (synchronisation mode)

- Transmission - Speed

- Direction (forward/backward)

- Parking brake

- Engine speed

- AdBlue® level

- Functional information- Threshing engaged

- Straw chopper engaged

- Chopping/swathing mode

Warning lights and gauges

TC – Cab


Keypad

Run screens:

- Run screen 1:

- Drum speed

- Drum concave clearance

- Cleaning fan speed

- Upper sieve opening

- Lower sieve opening

- Run screen 2:

- Threshing losses (straw w)

- Cleaning losses

- Fan speed

- Returns volume

- Grain moisture rate

- NEW 2015: Auto Diagnostic



TC – Cab


Increase Decrease

Entrer

Cancel

Eng.

speed/load.

Head. height

Area counter

Losses

sensitivity

SettingsCalibration

Air conditioning /

Moisture sensor

Service

Intervals

Combine Info

Run screens

1/2

Scroll down

Scroll up

Run screens



• Suit perfectly to the operator – Column inclination thank to the pedal

– Upper part inclination

– Steering wheel height

• Foot holders– On each side of the steering column

– More comfort for the operator

TC – Cab

Steering column

• Roof top Commands– Radio Bluetooth

– Mirrors

– Lights

– Wipers…

• Air conditioning– Manual

– Manual + heater

– Automatic

TC – Cab

Cab roof control panel

TC – Cab

Easy light control

TC – Cab

A place for everything

TC – Cab

Up to the last detail

TC – Accessories

The difference between a TC and your TC

• Real time moisture sensor– The moisture sensor get the grain sample

from the clean grain elevator

– Moisture is measured continuously

– Moisture rate is displayed on the InfoView™II monitor

• Only one calibration per crop type – Easy and simple to calibrate

– When the grain sample is done, the operator can keep working and come back later on the calibration screen to enter the right value.

TC - Accessories

Integrated moisture sensor

Once the grain sample is

done, the operator can

switch to the run screen

and keep harvesting

Enter directly the right

moisture rate in the

monitor

OR

• Dedicated display RDS Ceres 8000i– CR8000i allows :

• Fields management

• Moisture sensor

• Yield monitor

• Data recording

– The system can be used to collect the field data if connected with the antenna .

• Two versions of precision farming software to meet your needs

– PLM viewer

• Free of charge

• Very simple to start with yield monitoring and mapping of field data

– PLM Office

• Advanced software for complete data management (seeding, spreading…)

• Dedicated customer support included

TC - Accessories

Complete precision farming solutions for those who want more

• EZ Pilot: 100% focused on the machine performance

– Available through the spare parts department

– The electrical motor is located under the steering wheel for a perfect visibility

– Slope compensation three axis (T3 technology)

• The combine follow the line whatever the terrain conditions

– 2 monitors available: FM750, FM1000

– Can be installed on another equipment after the season…

TC - Accessories

EZ pilot, guidance system almost integrated

• PLM ready– Prewired for the Telematics module

• Essential (DIA kit only)– Essential (for all machine kind, older model as

well), can provide the following information:

• Location

• Working status

• Geofencing

• Professional (DIA kit only)– Professional, will be connected to the CAN

network, it will provide the same information as the essential version and in addition:

• Real time virtual display (up to four screens)

• Performance analysis

• Messaging

• mapping

TC - Accessories

You manage your fleet from your office

TC - Summary

Entry level but not low specs

NEW design

Dual-Chop™

SmartSieve™ Double cascade

Opti-Fan™ system

Threshing system

WITH or WITHOUT

Rotary separator

on 4 or 5 straw walkers

AutoFloat™II system

VariFeed™headers

NEW CAB

Harvest Suite™Comfort

InfoView™II Monitor

Tried simplicity, proven performance and high comfort –Models Line-up TC, What’s new 2015? ......

Documents

Transcript of Tried simplicity, proven performance and high comfort –Models Line-up TC, What’s new 2015? ......