TRIDENT-3000 04... · 2013. 4. 5. · Web: Email: [email protected] USA Customers: Sealite USA...
Transcript of TRIDENT-3000 04... · 2013. 4. 5. · Web: Email: [email protected] USA Customers: Sealite USA...
Guard rail
Internal 10m2 radar reflector
Access ladder
Optional solar light available
Head Office:Sealite Pty LtdAUSTRALIA
Ph: +61(0)3 5977 6128Fax: +61(0)3 5977 6124Web: www.sealite.com.auEmail: [email protected]
USA Customers:Sealite USAGilford (NH, USA)
Ph: +1 (603) 524-6066Fax: +1 (603) 524-8100Web: www.sealiteusa.comEmail: [email protected]
The Trident-3000 is one of the largest rotationally moulded buoys available, with a float diameter of 3 meters and lantern focal height of up to 5 meters.
The float section of the Trident-3000 is built from four (4) roto-moulded quadrants, which fasten together to form an incredibly robust 3 meter wide float section standing 1.8m tall. Each quadrant is moulded from UV-stabilised virgin polyethylene, and has an 18mm wall thickness. In addition, each section can be filled with closed-cell polyurethane, which prevents the ingress of moisture in the unlikely event of damage.
A galvanised steel or 316-grade stainless steel mooring pole runs through the centre of the assembly, to which the tower section is fastened. Four large lifting eyes aid in buoy mooring and periodic servicing.
The enhanced poly-tower design provides a huge visual area for navaid recognition, and consists of two sealed rotationally-moulded tower sections. The lower section incorporates a battery access door, and houses batteries, controllers, and any ancillary electronic payload. The top section incorporates an internal radar reflector and solar mount facilities.
Rotationally moulded panelling is fitted to the outside of the tower section to create a large coloured visual area for marking. The replaceable panelling also simplifies cardinal marking, and gives operators flexibility in stocking spare components. No part of the structure requires painting at any stage of the products lifespan.
An integrated ladder with harness attachment points runs vertically up the tower to the top platform.
A large counterweight offers exceptional stability in a variety of exposed regions.
The Trident-3000 can be supplied in all IALA colours.
TRIDENT-30003000mm dia. Ocean Buoy
The Sealite Advantage
• High visibility red, green, white or yellow as per IALA recommendations
• 3mtr diameter
• 5mtr focal height
• Robust construction of 4 quadrant hull sections
• Lightweight
• Large battery & payload section
• Excellent buoyancy and stability
• Easy to deploy & service
• 100% recyclable
• No painting, ever
• Cost effective & environmentally friendly
Adjustable ballast
Optional day mark shapes
Sealed tower access door
Rotationally moulded to 18mm wall thickness
Also available with complete stainless steel assembly
Sealite buoy products are made from 100% recyclable materials. As a service to customers, individual components and products at the end of their service life may be returned to Sealite for recycling.
IALA top mark
Environmentally Friendly & Completely Recyclable
TRIDENT installation, Westernport Bay (shown with S/S tower section)
NewDesignPoly-tower assembly
Head Office:Sealite Pty LtdAUSTRALIA
Ph: +61(0)3 5977 6128Fax: +61(0)3 5977 6124Web: www.sealite.com.auEmail: [email protected]
USA Customers:Sealite USAGilford (NH, USA)
Ph: +1 (603) 524-6066Fax: +1 (603) 524-8100Web: www.sealiteusa.comEmail: [email protected]
TRIDENT-30003000mm dia. Ocean Buoy
General CharacteristicsAvailable Colours Red, Green, White, Yellow
as per IALA RecommendationsRed, Green, White, Yellow as per IALA Recommendations
Focal Plain Height (mm/inches) 4500 / 1771/8 5000 / 196Total Reserve Buoyancy (kg/lbs) 3170 / 6990 3210 / 7077Draft, Maximum (mm/inches) 2400 / 941/2 2400 / 941/2
Freeboard, Minimum (mm/inches) 800 / 311/2 800 / 311/2=
Maximum Mooring Load (kgs/lbs) 2750 / 6063 2750 / 6063Safe Working Load (kgs/lbs) 6000 / 13228 (one lifting point)
8630 / 19025 (two lifting points)6000 / 13228 (one lifting point)8630 / 19025 (two lifting points)
Submergence (kg/cm / lbs/inch) 72 / 403 72 / 403Wind Area (m2) 7.1m2 5.7m2
Water Area (m2) 2.1m2 2.1m2
Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin polyethylene
float section, tower assembly, top marks and panelling.316-grade stainless steel fixtures
Rotationally moulded UV-stabilised virgin polyethylene float section, 316-grade stainless steel tower assembly, rotationally moulded UV-stabilised virgin polyethylene top marks and panelling
Wall Thickness (mm/inches) 18 / 3/4 18 / 3/4
Ballast (kgs/lbs) 765 / 1687 external steel 600 / 1322 external steelFilling Closed-cell polyurethane foam (optional) Closed-cell polyurethane foam (optional)Height (mm/inches) 7300 / 2872/5 6690 / 421/3
Width (mm/inches) 3000 / 1181/8 3000 / 1181/8
Mass (kg/lbs) 2580 / 5688 (depending on payload) 2540 / 4515 (depending on payload)Product Life Expectancy >20 years >20 years
CertificationsQuality Assurance ISO9001:2000 ISO9001:2000
Intellectual PropertyTrademarks SEALITE® is a registered trademark of Sealite Pty Ltd SEALITE® is a registered trademark of Sealite Pty Ltd
Warranty* 5 years* 5 years*
Lantern Options Sealite SL60, SL70, SLC310, SLC420 or SL125 series of lantern
Sealite SL60, SL70, SLC310, SLC420 or SL125 series of lantern
Accessory Options • Mould-in graphics• Sealite IALA recommended top marks• Rotationally moulded side-panelling• Monitoring Systems (AIS, GSM cell-phone)
• Mould-in graphics• Sealite IALA recommended top marks• Rotationally moulded side-panelling• Monitoring Systems (AIS, GSM cell-phone)
SPECIFICATIONS • Polyethylene Tower Assembly Stainless Steel Tower Assembly
• Specifications subject to change or variation without notice
* Subject to standard terms and conditions
Shown with poly-tower
Head Office:Sealite Pty LtdAUSTRALIA
Ph: +61(0)3 5977 6128Fax: +61(0)3 5977 6124Web: www.sealite.com.auEmail: [email protected]
USA Customers:Sealite USAGilford (NH, USA)
Ph: +1 (603) 524-6066Fax: +1 (603) 524-8100Web: www.sealiteusa.comEmail: [email protected]
Sealite can provide turn-key mooring solutions for the range of buoy products, enabling complete systems to be containerised and delivered to customer sites around the world.
As a service to valued customers, Sealite has developed an advanced mooring calculator based on IALA guidelines and experience from major users. Known as SeaMoor™, this facility is available free of charge by contacting Sealite.
The calculator will simulate navaid mooring using available data, and produce a parts list of required components.
The above image shows typical IALA Calculations for the Trident-3000 Ocean Buoy, viewed using Sealite’s SeaMoor™ mooring calculator.
SeaMoor™Mooring Systems
The Sealite Advantage
• Complete range of mooring chain & accessories to compliment Sealite buoy products
• IALA recommended mooring solutions calculated with Sealite advanced SeaMoor™ mooring calculator
• Flexibility in manufacture to meet various installation requirements & local conditions
* One-stop for all marine AtoN equipment
Typical IALA Mooring Calculations