TREVOR SINGLE DOOR SURROUNDS - Pearlworksinc.com
16
Group SDT-100A is designed to fit openings from 2’ wide to 2’ 6” wide. Group SDT-100B is designed to fit openings from 2’ 8” wide to 3’ wide. The cartouche has been designed with specific cut off points for the various widths. The crown and backing plate are made with sufficient width to provide adjustability within the designated parameters. Both of these width groups can be used with all combinations of 4-1/2” wide columns, plinth blocks, corbels and bases. The Trevor door collection is a surround system developed exclusively by Pearlworks for practical assembly of a classic ornate door surround. We created a column combination consisting of a base, column, corbel, and plinth block that fits with our proprietary curved crown and cartouche, this completes a beautifully designed surround that is engineered for easy and quick installation (45 minutes) in a wide range of sizes. Pearlworks, Inc. 14251 Franklin Ave. Tustin, CA 92780 Office: (714) 573-1700 Fax: (714) 573-1708 Toll Free: (855) PEARLWORKS www.pearlworksinc.com TREVOR SINGLE DOOR SURROUNDS Single surrounds come in two different width groups
Transcript of TREVOR SINGLE DOOR SURROUNDS - Pearlworksinc.com
Group SDT-100A is designed to fit openings from 2’ wide to 2’ 6” wide.
Group SDT-100B is designed to fit openings from 2’ 8” wide to 3’ wide.
The cartouche has been designed with specific cutoff points for the various widths. The crown andbacking plate are made with sufficient width to provide adjustability within the designated parameters.
Both of these width groups can be used with all combinations of 4-1/2” wide columns, plinth blocks, corbels and bases.
The Trevor door collection is a surround system developed exclusively by Pearlworks for practical assemblyof a classic ornate door surround. We created a column combination consisting of a base, column, corbel, andplinth block that fits with our proprietary curved crown and cartouche, this completes a beautifully designed surround that is engineered for easy and quick installation (45 minutes) in a wide range of sizes.
Pearlworks, Inc. 14251 Franklin Ave. Tustin, CA 92780Office: (714) 573-1700 Fax: (714) 573-1708 Toll Free: (855) PEARLWORKS
www.pearlworksinc.com
TREVOR SINGLEDOOR SURROUNDS
Single surrounds come in two different width groups
DimensionsDimensions
Maple Backing PlateMaple Backing PlateTBP-100ASTBP-100AS
CTCT-105AS-105ASCB-31CB-311A1ATT
PB3-APB3-ATT
6565””
BASE-106ABASE-106ATT
PB4-APB4-ATT
CTCT-104AS-104AS
TREVOR COLLECTIONTREVOR COLLECTION ASSEMBLASSEMBLYYSINGLE DOOR OPENINGSINGLE DOOR OPENING
Assembly Part #: SDTAssembly Part #: SDT-100A-100A (For Door Openings: 2(For Door Openings: 2’’.0.0””, 2, 2’’.2.2””, 2, 2’’.4.4””, 2, 2’’.6.6””))
MLD-156TSAMLD-156TSA
MLD-214TSAMLD-214TSA
65” x 4” x 4”65” x 4” x 4”
PB3-AT or PB4-ATPB3-AT or PB4-AT 4-3/4” x 4-3/4” x 3”4-3/4” x 4-3/4” x 3”
CB-311AT / CB-330AT / CB-331ATCB-311AT / CB-330AT / CB-331AT
Individual Part #Individual Part #
MLD-214TSAMLD-214TSA
4-3/4” x 21-1/2” x 2-3/4”4-3/4” x 21-1/2” x 2-3/4”
TBP-100ASTBP-100AS28” x 5-3/4” x 1-1/2”28” x 5-3/4” x 1-1/2”
BASE-106ATBASE-106AT x 20” x 1-1/2”5” x 20” x 1-1/2”
CB-331ACB-331ATTCB-330ACB-330ATT
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
CT-104AS or CT-105ASCT-104AS or CT-105AS
31” x 11” x 1/2”31” x 11” x 1/2”
MLD-156TSAMLD-156TSA 65” x 3-1/4” x 4-3/4”65” x 3-1/4” x 4-3/4”
2-1/42-1/4””MLD-156MLD-156TSASide viewSide view
4-3/44-3/4””
MLD-214MLD-214TSASide viewSide view
2-1/42-1/4””
44””
4-1/2” x 1” x 4’ or 8’4-1/2” x 1” x 4’ or 8’COLM-115BCOLM-115B
COLM-1COLM-115B15B
* Complete assembly SDT-100A $899.95
MLD-103AMLD-103A InsertInsert
6565””
3-1/43-1/4””
3-7/84” ”
2
DimensionsDimensions
CTCT-105BS-105BSCB-31CB-311A1ATT
PB3-APB3-ATT
BASE-106ABASE-106ATT
PB4-APB4-ATT
CTCT-104BS-104BS
TREVOR COLLECTIONTREVOR COLLECTION ASSEMBLASSEMBLYYSINGLE DOOR OPENINGSINGLE DOOR OPENING
SDTSDT-100B (For Door Openings: 2-100B (For Door Openings: 2’’.8.8””, 2, 2’’.10.10””, 3, 3’’.0.0””))Assembly Part #:Assembly Part #:
PB3-AT or PB4-ATPB3-AT or PB4-AT 4-3/4” x 4-3/4” x 3”4-3/4” x 4-3/4” x 3”
CB-311AT / CB-330AT / CB-331ATCB-311AT / CB-330AT / CB-331AT
MLD-214TSBMLD-214TSB
4-3/4” x 21-1/2” x 2-3/4”4-3/4” x 21-1/2” x 2-3/4”
TBP-100BSTBP-100BS 37” x 11-3/4” x 1/2”37” x 11-3/4” x 1/2”
BASE-106ATBASE-106AT
CB-331ACB-331ATTCB-330ACB-330ATT
CT-104BS or CT-105BSCT-104BS or CT-105BS x 6-1/2” x 1-1/2”33” x 6-1/2” x 1-1/2”
MLD-156TSBMLD-156TSB 70-1/2” x 3-1/4” x 4-3/4”70-1/2” x 3-1/4” x 4-3/4”
4-1/2” x 1” x 4’ or 8’4-1/2” x 1” x 4’ or 8’
70-1/2” x 4” x 4”70-1/2” x 4” x 4”
x 20” x 1-1/2”5” x 20” x 1-1/2”
Individual Part #Individual Part #
COLM-1COLM-115B15B
* Complete assembly SDT-100B $999.95
COLM-115BCOLM-115B
Maple Backing PlateMaple Backing PlateTBP-100BSTBP-100BS
70-1/270-1/2””
MLD-156TSBMLD-156TSB
MLD-214TSBMLD-214TSB2-1/42-1/4””
MLD-156TSBSide viewSide view
4-3/44-3/4””
MLD-214TSBSide viewSide view
2-1/42-1/4””
4”
MLD-103AMLD-103A InsertInsert
70-1/2”
3-1/43-1/4””
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
4”
BASE-106ABASE-106ATT
3
TREVOR COLLECTION
4
TREVOR DOUBLE DOOR SURROUNDSDouble door surrounds come in different width groups. Group DDT-100A is designed to fit openings from 4’ wide to 4’ 8” wide. DDT-100B is designed to fit openings from 5’ wide to 5’.8” wide. The width designation pertains only to the crown, cartouche and backing plate. The cartouche has been designed with specific cut offpoints to fit various widths. The crown and backing plate are made with sufficient width to provide adjustability within the designated parameters. Both of these width groups can be used with all combinations of4-1/2” wide columns, plinth blocks, corbels and bases.DDT-100C is designed to fit openings from 6’ to 9’ 6” wide. When using the DDT-100C it is necessary to use 5-1/2” width columns, plinth blocks, corbels and bases.DDT-100D is designed to fit openings from 6’ to 9’ 6” wide. When using the DDT-100D it is necessary to use 7” width columns, plinth blocks, corbels and bases.
DimensionsDimensions
CTCT-105AD-105ADCB-31CB-311A1ATT
PB3-APB3-ATT
BASE-106ABASE-106ATT
PB4-APB4-ATT
CTCT-104AD-104AD
TREVOR COLLECTIONTREVOR COLLECTION ASSEMBLASSEMBLYYDOUBLE DOOR OPENINGDOUBLE DOOR OPENING
DDTDDT-100A-100A (For Double Door Openings: 4(For Double Door Openings: 4’’.0.0””, 4, 4’’.4.4””, 4, 4’’.8.8””))Assembly Part #:Assembly Part #:
90-1/2” x 3-3/4” x 5-1/4”90-1/2” x 3-3/4” x 5-1/4”
PB3-AT or PB4-ATPB3-AT or PB4-AT 4-3/4” x 4-3/4” x 3”4-3/4” x 4-3/4” x 3”
CB-311AT / CB-330AT / CB-331ATCB-311AT / CB-330AT / CB-331AT
MLD-155TDAMLD-155TDA
4-3/4” x 21-1/2” x 2-3/4”4-3/4” x 21-1/2” x 2-3/4”
TBP-100ADTBP-100AD 57” x 12-3/4” x 1/2”57” x 12-3/4” x 1/2”
BASE-106ATBASE-106AT
CB-331ACB-331ATTCB-330ACB-330ATT
4-1/2” x 1” x 4’ or 8’4-1/2” x 1” x 4’ or 8’
CT-104AD or CT-105ADCT-104AD or CT-105AD 50-1/2” x 7-3/4” x 1-1/2”50-1/2” x 7-3/4” x 1-1/2”
MLD-156TDA 90-1/2” x 3-1/4” x 4-3/4”90-1/2” x 3-1/4” x 4-3/4”
x 20” x 1-1/2”5” x 20” x 1-1/2”
Individual Part #Individual Part #
COLM-1COLM-115B15B
* Complete assembly DDT-100A $1159.95
COLM-115BCOLM-115B
Maple Backing PlateMaple Backing PlateTBP-100ADTBP-100AD
90-1/290-1/2
MLD-156TDAMLD-156TDA
MLD-155TDA2-1/42-1/4””
MLD-156TDASide viewSide view
MLD-155TDASide viewSide view
4-3/44-3/4””
2-1/22-1/2””
5-1/45-1/4””
MLD-103AMLD-103A InsertInsert
90-1/2”
3-1/43-1/4””
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
3-3/4””
5
TREVOR COLLECTION
DimensionsDimensions
CTCT-105BD-105BDCB-31CB-311A1ATT
PB3-APB3-ATT
BASE-106ABASE-106ATT
PB4-APB4-ATT
CTCT-104BD-104BD
TREVOR COLLECTIONTREVOR COLLECTION ASSEMBLASSEMBLYYDOUBLE DOOR OPENINGDOUBLE DOOR OPENING
DDTDDT-100B (For Double Door Openings: 5-100B (For Double Door Openings: 5’’.0.0””, 5, 5’’.4.4””, 5, 5’’.8.8””))Assembly Part #:Assembly Part #:
105” x x 5-1/4”105” x 4” x 5-1/4”
PB3-AT or PB4-ATPB3-AT or PB4-AT 4-3/4” x 4-3/4” x 3”4-3/4” x 4-3/4” x 3”
CB-311AT / CB-330AT / CB-331ATCB-311AT / CB-330AT / CB-331AT
MLD-155TDBMLD-155TDB
4-3/4” x 21-1/2” x 2-3/4”4-3/4” x 21-1/2” x 2-3/4”
TBP-100BDTBP-100BD 74” x 13-1/2” x 1/2”74” x 13-1/2” x 1/2”
BASE-106ATBASE-106AT x 20” x 1-1/2”5” x 20” x 1-1/2”
CB-331ACB-331ATTCB-330ACB-330ATT
4-1/2” x 1” x 4’ or 8’4-1/2” x 1” x 4’ or 8’
CT-104BD or CT-105BDCT-104BD or CT-105BD 65-1/2” x 7-3/4” x 1-1/2”65-1/2” x 7-3/4” x 1-1/2”
MLD-156TDBMLD-156TDB 105” x 3-1/4” x 4-3/4”105” x 3-1/4” x 4-3/4”
Individual Part #Individual Part #
COLM-1COLM-115B15B
* Complete assembly DDT-100B $1259.95
COLM-115BCOLM-115B
Maple Backing PlateMaple Backing PlateTBP-100BDTBP-100BD
105105””
MLD-156TDBMLD-156TDB
MLD-155TDB2-1/2”
MLD-156TDBSide viewSide view
MLD-155TDBSide viewSide view
4-3/44-3/4””
2-1/22-1/2””
5-1/45-1/4””
MLD-103AMLD-103A InsertInsert
105”
3-1/43-1/4””
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
The Trevor Collection uses COLM-115B. If desired any of our modular 4-1/2” Columnscan be used. All columns options are on page 9 of this section.
4”
6
DimensionsDimensions
CTCT-105CD-105CDCB-31CB-311BT1BT
PB3-BTPB3-BT
BASE-106BTBASE-106BT
PB4-BTPB4-BT
CTCT-104CD-104CD
TREVOR COLLECTIONTREVOR COLLECTION ASSEMBLASSEMBLYYDOUBLE DOOR OPENINGDOUBLE DOOR OPENING
DDTDDT-100C (For Double Door Openings: 6-100C (For Double Door Openings: 6’’ thru 9thru 9’’66””))Assembly Part #:Assembly Part #:
140” x 5-1/2” x 7-3/4”140” x 5-1/2” x 7-3/4”
PB3-BT or PB4-BTPB3-BT or PB4-BT x 6” x 3-1/2”6”
CB-311BT / CB-330BT / CB-331BTCB-311BT / CB-330BT / CB-331BT
MLD-155TDCMLD-155TDC
5-3/4” x 24” x 3-1/4”5-3/4” x 24” x 3-1/4”
TBP-100CDTBP-100CD 10’ x10’ x 13-1/2” x 3/4”
BASE-106BTBASE-106BT 5-3/4” x 26” x 2-1/2”5-3/4” x 2-1/2”
CB-331BTCB-331BTCB-330BTCB-330BT
* See page 9 in this section for optional designs.* See page 9 in this section for optional designs.
5-1/2” x 1-1/2” x 5’ or 10’5-1/2” x 1-1/2” x 5’ or 10’
CT-104CD or CT-105CDCT-104CD or CT-105CD 114” x 10” x 2”114” x 10” x 2”
MLD-156TDCMLD-156TDC 140” x 5-1/2” x 7-3/4”140” x 5-1/2” x 7-3/4”
Individual Part #Individual Part #
COLM-1COLM-115C15C
* Complete assembly DDT-100C $1869.95
COLM-115CCOLM-115C
Maple Backing PlateMaple Backing PlateTBP-100CDTBP-100CD
140140””
MLD-156TDCMLD-156TDC
MLD-155TDC33””
MLD-156TDCSide viewSide view
MLD-155TDCSide viewSide view
7-3/47-3/4””
3-1/23-1/2””
7-3/47-3/4””
MLD-103CMLD-103C InsertInsert
140140””
5-1/2”
5-1/2”
7
* DDT-100C uses 5-1/2” wide columns.
TREVOR COLLECTION
MLD-155TDD
MLD-156TDD
10-3/4”
8
* DDT-100D uses 7” wide columns.
9
TREVOR COLLECTION
TREVOR PARTS ALSO SOLD SEPARATELY
BASE-106AT $109.955” x 20” x 1-1/2”
BASE-106BT $149.955-3/4” x 25-3/4” x 2-1/2”
BASE-106CT $199.957-1/4” x 30-1/2” x 3-1/2”
CORBEL SIZES:
Size AT: $159.954-3/4” x 21-1/2” x 3”
Size BT: $199.955-3/4” x 24” x 3-1/4”
Size CT: $249.957-1/4” x 35” x 6”
CT-104AS $99.95 28” x 5-3/4” x 1-1/2” CT-104BS $119.95 32-3/4” x 6-1/2” x 1-1/2”
CB-311AT-BT-CT CB-330AT-BT-CT CB-331AT-BT-CT
CT-104AD $339.95 50-1/2” x 7-3/4” x 1-1/2” CT-104CD $349.95 114” x 10” x 2” (3 piece set)CT-104BD $379.95 65-1/2” x 7-3/4” x 1-1/2”
CT-105AS $99.95 28” x 5-3/4” x 1-1/2” CT-105BS $119.95 32-3/4” x 6-1/2” x 1-1/2”
CT-105AD $199.95 50-1/2” x 7-3/4” x 1-1/2” CT-105CD $349.95 114” x 10” x 2” (3 piece set)CT-105BD $239.95 65-1/2” x 7-3/4” x 1-1/2”
* All sizes are approx.- max W” x max H” x Thickness”10
* All sizes are approx.- max W” x max H” x Thickness” 11
TREVOR PARTS ALSO SOLD SEPARATELY
MLD-155TDA $319.95 90-1/2” x 3-3/4” x 5-1/4” MLD-155TDB $379.95 105” x 3-3/4” x 5-1/4”MLD-155TDC $649.95 140” x 5-1/2” x 7-3/4”MLD-155TDD $799.95 137-1/2” x 5-1/2” x 10-3/4”
MLD-155TDA-EXT $149.95 24” x 3-3/4” x 5-1/4” MLD-155TDB -EXT $149.95 24” x 3-3/4” x 5-1/4”MLD-155TDC-EXT $199.95 36” x 5-1/2” x 7-3/4”MLD-155TDD-EXT $279.95 36” x 5-1/2” x 10-3/4”
5-1/4”
3-3/4”
2-1/2”
Size“A&B”
7-3/4”
5-1/2”
3-1/2”
10-3/4”
5-1/2”
6-1/4”
Size “C”
Size “D”
MLD-214TSA $199.95 65” x 4” x 4”MLD-214TSB $269.95 70-1/2” x 4” x 4”
MLD-214TSA-EXT $99.95 18” x 4” x 4”MLD-214TSB-EXT $99.95 18” x 4” x 4”
Curved Crown Extensions:
Our extension pieces are designed to butt into the endsof our curved crowns. Depending on the chosen size,our extension pieces are sized from 18” to 36”.
4”
4”
2-1/4”
Size“A&B”
TREVOR COLLECTION
TDA: 46”TDB: 51”
TDC: X”TDD: X”
TDA: 4-1/2”TDB: 5”TDC: X”TDD: X”
* All sizes are approx.- max W” x max H” x Thickness”12
TREVOR PARTS ALSO SOLD SEPARATELY
MLD-156TSA-EXT $99.95 18” x 3-1/4” x 4-3/4” MLD-156TSB -EXT $99.95 18” x 3-1/4” x 4-3/4”
MLD-156TDA-EXT $149.95 24” x 3-1/4” x 4-3/4”MLD-156TDB-EXT $149.95 24” x 3-1/4” x 4-3/4”MLD-156TDC-EXT $249.95 36” x 5-1/2” x 7-3/4”MLD-156TDD-EXT $279.95 36” x 5-1/2” x 10-3/4”
4-3/4”
3-1/4”
2-1/4”
Size “A&B”
7-3/4”
5-1/2”
3-1/4”
10-3/4”
5-1/2”
6-1/4”
MLD-156TSA $199.9565” x 3-1/4” x 4-3/4”MLD-156TSB $269.9570-1/2” x 3-1/4” x 4-3/4”
MLD-156TDA $319.95 90-1/2” x 3-1/4” x 4-3/4”MLD-156TDB $379.95 105” x 3-1/4” x 4-3/4”MLD-156TDC $649.95 140” x 5-1/2” x 7-3/4”MLD-156TDD $799.95 137-1/2” x 5-1/2” x 10-3/4”
MLD-100 MLD-122A MLD-200AMLD-102A MLD-123A MLD-201AMLD-103A MLD-124A MLD-202AMLD-105A MLD-125A MLD-203AMLD-109A MLD-126B MLD-204AMLD-111A MLD-127A MLD-205AMLD-113A MLD-133A MLD-206AMLD-116A MLD-135A MLD-213AMLD-115A MLD-172
MLD-102C MLD-114 MLD-135CMLD-103C MLD-121 MLD-203CMLD-105C MLD-123C MLD-212AMLD-111C MLD-130
“This open dado accepts any 5/8” insertmoulding” listing below.
5/8” Mouldings insert available forMLD-156TSA MLD-156TSBAND MLD-156TDA MLD-TDB
1” Mouldings insert available forMLD-156TDC AND MLD-156TDD
Size “C”
Size “D”
TREVOR DOOR SURROUND
TREVOR COLLECTION
TREVOR DOOR SURROUND
14
COLM-115B 4-1/2” W x 1” Thick
Available in 4’ & 8’ Length COLM-115C
5-1/2” W x 1” Thick Available in 5’ & 10’ Length
COLM-115D 7” W x 1” Thick
Available in 5’ & 10’ Length
15
TREVOR PARTS ALSO SOLD SEPARATELY
TBP-100AS $49.9531” W x 11” H x 1/2” ThickTBP-100BS $59.9537” W x 11-3/4” H x 1/2” Thick
TBP-100AD $79.9557” W x 12-3/4” H x 1/2”TBP-100BD $89.9574” W x 13-1/2” H x 1/2”TBP-100CD $129.9510’ W x 16” H x 3/4”TBP-100DD $149.9510’ W x 17-1/4” H x 3/4”
PB3-AT $44.95 4-3/4” x 4-3/4” x 3”PB3-BT $69.95 6” x 6” x 3-1/2”
PB3-CT $179.95 7-1/4” x 7-1/4” x 6”Sold as Left & Right Pair. Sold as Left & Right Pair.
Trevor backing plate
PB4-AT $44.95 4-3/4” x 4-3/4” x 3”PB4-BT $69.95 6” x 6” x 3-1/2”
PB4-CT $179.95 7-1/4” x 7-1/4” x 6”
TREVOR COLLECTION
