Transportation Program Safety Policy

It is expected that students understand and respect the

issue of Health and Safety and conduct themselves in a manner that creates a safe environment

for self and others

Importance of Health and Safety

Provides guidelines- expectations

Informs people- what are the hazards?

Maintains standards- what are the rules?

Involves everyone – I have a say

You should Know: M.O.L. , OH&S Act

Why is a SAFE workplace important to YOU?

Safety Regulations

• Ontario Schools Code of Conduct, Tech Ed. Curriculum, CO-op.

Ministry of Education

• Develop and enforce labour legislation

Ministry of Labour

• Occupational Health and Safety Act• The act (laws) that employers and

employees must follow OHSA

http://www.labour.gov.on.ca/english/

Occupational Health & Safety Act

Additional duties of supervisor

(2) Without limiting the duty imposed by subsection (1), a supervisor shall,

(a) advise a worker of the existence of any potential or actual danger to the health or safety of the worker of which the supervisor is aware;(b) where so prescribed, provide a worker with written instructions as to the measures and procedures to be taken for protection of the worker; and(c) take every precaution reasonable in the circumstances for the protection of a worker. R.S.O. 1990, c. O.1, s. 27.

Occupational Health & Safety Act

Duties of workers

28.  (1) A worker shall,

(a) work in compliance with the provisions of this Act and the regulations;

(b) use or wear the equipment, protective devices or clothing that the worker’s employer requires to be used or worn;

(c) report to his or her employer or supervisor the absence of or defect in any equipment or protective device of which the worker is aware and which may endanger himself, herself or another worker; and

(d) report to his or her employer or supervisor any contravention of this Act or the regulations or the existence of any hazard of which he or she knows.

What are the HAZARDS?

Fumes – Chemica

ls & Paint

Entanglement

rotating equipme

nt & tools

Pinch Points – machine

ry & material

Sharp Objects – tool bits

& sharp edges

Tripping Hazards

– Projects

& Material

Hoist and

JacksJack

stands

Fire – Gasoline

, Welding

& Chemica

ls

Personal Safety

No student will act in a hazardous and or dangerous manner.

Use of Safety Glasses is Mandatory. Report all injuries!!!! no matter how

minor. Watch for moving vehilcles No Book-bags, or Knapsacks NO open toed shoes in the shop NO CELL PHONES, IPODS, etc

WHMIS

Workplace Hazardous Materials Information System• System to

identify hazardous materials in the workplace

3 essential components:• Labels• MSDS• Worker

training

Fire Safety

Know the emergency exit procedure B2 EVACUATION REAR DOOR Check Work Area for - Combustibles Ensure exhaust hose on ALL running engines Locate all Fire Extinguishers All Flammable Liquids in Yellow Storage Locker

Fire Safety Equipment

https://www.youtube.com/watch?v=Hw4uIiXUCY4

Safety Equipment

First Aid Kit Location Emergency call procedure

“Dial 300” Eye Wash Station Fire Blanket

P.P.E. - Personal Protective Equipment

Pinch Points

Safety Procedures

• Students are NOT ALLOWED to work in the shop UNSUPERVISED

OBSERVE LOCKOUT TAGS DO NOT USE equipment until TRAINED!

* DO NOT use it! ? = ASK Be aware of people around you at all times.rea Be aware near HOISTS! ALWAYS USE JACK STANDS! Moving vehicles by licenced drivers ONLY!

Shop Clean-up Clean-up required after each shop period RETURN ALL tools and equipment to PROPER

LOCATIONS TURN OFF- all equipment and tanks Put away all projects and MATERIALS Floor area must be clean especially NEAR

EXITS EVERYONE IS INVOLVED- Be part of the

solution!

Safety Procedures

Health and Safety Policy

Based on INDUSTRY STANDARDS http://ccohs.ca/youngworkers/

Excellent TRAINING for future careers

Employers are Demanding Safe Workers

All work places need to have a HEALTH AND SAFETY policy

Good luck

&

Stay Safe