Transport technology / Chassis technology / Couplings ... · Technical Information EWG-type...
Transcript of Transport technology / Chassis technology / Couplings ... · Technical Information EWG-type...
AxlesSubline
CouplingsBall steering turnplate, couplings, fifth wheel coupling and technical information
Transport technology / Chassis technology / Couplings
Table of Contents
Chapter Product category Page
Couplings Ball steering turnplate Jost Product line N and L 17.01.01.1
Jost Product line HE 17.01.01.2
Jost Product line HE and SO 17.01.01.3
Jost Product line KDL 900 and KDL 900 W 17.01.01.4
BPW Product line DK 17.01.01.5
Couplings Car trailers 17.02.01.1
Tow bars 17.02.02.1
Break down coupling 17.02.02.2
Trailer couplings for 40 + 50 mm rings (DIN 74054/74053) 17.02.03.1
Trailer brackets und accessories 17.02.04.1
Fifth wheel coupling Fifth wheel coupling 17.03.01.1
Jost and SAF King pillars 17.03.02.1
Technical Information EWG-type authorisation according to directive 94/20/EU 17.04.01.1
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings
Product IndexNumeric
Article No. Pg.
116 664 000 17.02.01.4
116 665 000 17.02.01.4
116 666 000 17.02.01.4
116 667 000 17.02.01.4
116 667 001 17.02.01.4
116 668 000 17.02.01.4
116 669 000 17.02.01.4
116 670 000 17.02.01.4
116 671 000 17.02.01.4
116 672 000 17.02.01.4
116 673 000 17.02.01.4
116 674 000 17.02.01.4
116 675 000 17.02.01.4
116 676 000 17.02.01.4
116 677 000 17.02.01.4
116 678 000 17.02.01.4
116 679 000 17.02.01.4
116 680 000 17.02.01.4
116 681 000 17.02.01.4
116 681 001 17.02.01.4
116 721 000 17.02.01.5
116 730 000 17.02.01.5
170 130 000 17.01.01.1
170 132 000 17.01.01.1
170 134 000 17.01.01.1
170 136 000 17.01.01.1
170 138 000 17.01.01.1
170 140 000 17.01.01.1
170 142 000 17.01.01.1
170 220 000 17.01.01.5
170 222 000 17.01.01.5
170 227 000 17.01.01.5
170 228 000 17.01.01.5
170 232 000 17.01.01.5
170 233 000 17.01.01.5
170 238 000 17.01.01.1
170 240 000 17.01.01.1
170 242 000 17.01.01.1
170 244 000 17.01.01.1
170 246 000 17.01.01.1
170 248 000 17.01.01.1
170 255 000 17.01.01.2
170 256 000 17.01.01.2
Article No. Pg.
170 257 000 17.01.01.2
170 258 000 17.01.01.2
170 259 000 17.01.01.2
170 260 000 17.01.01.2
170 261 000 17.01.01.2
170 262 000 17.01.01.2
170 264 001 17.01.01.3
170 268 000 17.01.01.3
170 270 000 17.01.01.3
170 274 000 17.01.01.3
170 278 000 17.01.01.3
170 279 000 17.01.01.3
170 289 000 17.01.01.3
170 295 000 17.01.01.3
170 296 000 17.01.01.3
170 422 000 17.01.01.4
170 423 000 17.01.01.4
170 424 000 17.01.01.4
170 425 000 17.01.01.4
170 426 000 17.01.01.4
170 427 000 17.01.01.4
170 557 000 17.02.04.3
170 558 100 17.02.04.1
170 558 101 17.02.04.1
170 558 500 17.02.04.1
170 579 000 17.02.02.1
170 582 000 17.02.02.1
170 586 000 17.02.02.1
170 587 000 17.02.02.1
170 589 000 17.02.02.1
170 592 000 17.02.02.1
170 600 000 17.02.01.1
170 603 010 17.02.01.3
170 604 010 17.02.01.2
170 605 000 17.02.01.2
170 606 000 17.02.01.2
170 608 000 17.02.01.2
170 609 000 17.02.01.2
170 612 000 17.02.01.2
170 614 000 17.02.01.3
170 615 000 17.02.01.3
170 632 000 17.02.01.1
170 635 000 17.02.01.1
Article No. Pg.
170 637 000 17.02.01.1
170 638 000 17.02.01.1
170 639 000 17.02.01.1
170 641 000 17.02.01.1
170 642 000 17.02.01.1
170 643 000 17.02.01.1
170 731 000 17.02.01.6
170 732 000 17.02.01.6
170 732 000 17.02.01.7
170 734 005 17.02.01.6
170 734 005 17.02.01.7
170 736 000 17.02.01.6
170 738 000 17.02.01.7
170 804 010 17.02.03.3
172 035 000 17.02.03.1
172 037 000 17.02.03.1
172 039 000 17.02.03.1
172 077 000 17.02.03.3
172 240 000 17.02.03.2
172 240 001 17.02.03.2
172 241 000 17.02.03.2
172 242 000 17.02.03.1
172 250 000 17.02.02.2
172 252 000 17.02.02.2
172 253 000 17.02.02.2
172 254 000 17.02.02.2
176 014 001 17.03.01.1
176 031 000 17.03.02.1
176 033 000 17.03.02.1
176 035 000 17.03.02.1
176 498 000 17.03.01.2
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings
17.01.01.1
Ball steering turnplate
Product line L for farm wagons or transfer cars with a
speed of up to 30 km/h. Product line N for heavy farm
wagons and light trailers for a speed superior to 30 km/h.
Jost Product line N and L
Type Permitted axial load
[kN]
ø A
[mm]
ø B
[mm]
ø C
[mm]
ø D
[mm]
ø E
[mm]
ø F
[mm]
G
[mm]
H
[mm]
Weight approx.
[kg/each]
Article No.
-Nr.
400 L 7,5 400 342 292 230 375 260 8 45 11 170 130 000
500 L 9,0 500 442 392 330 475 360 8 45 15 170 132 000
650 L 15,0 650 592 542 480 625 510 8 45 20 170 134 000
750 L 18,0 750 692 642 580 725 610 8 45 23 170 136 000
850 L 25,0 850 792 742 680 825 710 8 45 27 170 138 000
950 L 30,0 950 892 842 780 925 810 8 45 30 170 140 000
1050 L 35,0 1050 992 942 880 1025 910 8 45 34 170 142 000
500 N 18,0 500 437 384 315 475 340 8 52 17 170 238 000
650 N 25,0 650 587 534 465 625 490 8 52 23 170 240 000
750 N 30,0 750 687 634 565 725 590 8 52 28 170 242 000
850 N 35,0 850 787 734 665 825 690 8 52 32 170 244 000
950 N 40,0 950 887 834 765 925 790 8 52 36 170 246 000
1050 N 45,0 1050 987 934 865 1025 890 8 52 40 170 248 000
Extent of supply: without illustration of mounting holes, primed.
The dimension specifications are subject to work tolerances.
The load data for the operation on paved roads and transport concerns is guaranteed for the product line N,
as it is common practice in Middle Europe.
The permitted axial load increases by 30 up to 50% at a speed beneath 30 km/h.
Mounting reference is made available on request.
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Ball steering turnplate / Jost Product line N and L
17.01.01.2
Ball steering turnplate
Product line HE
For truck trailers and special vehicles
Jost Product line HE
Type Permitted axial load
[kN]
ø A
[mm]
ø B
[mm]
ø C
[mm]
ø D
[mm]
ø E
[mm]
ø F
[mm]
Weight approx.
[kg/each]
Article No.
-Nr.
HE 12 - 1000 W 70 1000 1008 877 846 960 974 65 170 255 000
HE 12 W1 80 1100 1108 977 946 1060 1074 72 170 256 000
HE 18 - 1000 W 80 1000 1008 877 846 960 974 65 170 257 000
HE 18 W1 100 1100 1108 977 946 1060 1074 72 170 258 000
HE 1000 - 22 W 100 1000 1008 877 846 960 974 65 170 259 000
HE 1100 - 22 W1 120 1100 1108 977 946 1060 1074 72 170 260 000
HE 1200 - 22 W1 130 1200 1208 1077 1046 1160 1174 80 170 261 000
HE 1300 - 22 W 140 1300 1308 1177 1146 1260 1274 89 170 262 000
Delivered state: primed, not bored or bored
1 bored
2 until ø 1100 mm 4 blind plugs, from ø 1200 mm 6 blind plugs
Product line HE maintenance-free Product line SO maintenance-free
The dimension specifications are subject to the work tole-
rances. The stated axial loads are valid at a speed up to 105
km/h for three-axle truck trailers. The axial loads can be ex-
ceeded by 10% for four wheel trailers. It is possible further-
more to exceed the values by 20% at a speed of 30 km/h.
Please ask for the permitted loads by indicating the vehicle
specifications, if utilised in forcibly steered semi-trailers.
The load data is valid for the operation on paved roads
and transport concerns, as it is common practice in Middle
Europe.
If the appearing axial loads exceed the permitted values of
the product line HE/SO maintenance-free, refer to our main-
tenance-free ball turning bearing of the KDL 900 product
line, which permits axial loads up to 250 kN.
Mounting reference is made available on request.
2 2
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Ball steering turnplate / Jost Product line HE
17.01.01.3
Product line HE Product line SO
The dimension specifications are subject to the work
tolerances. The stated axial loads are valid at a speed up to
105 km/h for three-axle truck trailers. The axial loads can
be exceeded by 10% for four wheel trailers. It is further-
more possible to exceed the values by 20% at a speed of
30 km/h.
Please ask for the permitted loads by indicating the vehic-
le specifications, if utilised in forcibly steered semi-trailers.
Ball steering turnplate
Product line HE and SO
For truck trailers and special vehicles
Jost Product line HE and SO
If the appearing axial loads exceed the permitted values
of the product line HE/SO maintenance-free, refer to our
maintenance-free ball turning bearing of the KDL 900 pro-
duct line, which permits axial loads up to 250 kN.
Mounting reference is made available on request.
Type Permitted
axial load
[kN]
ø A
[mm]
ø B
[mm]
ø C
[mm]
ø D
[mm]
ø E
[mm]
ø F
[mm]
ø G
ca. [mm]
ø H
ca. [mm]
ø d
[mm]
Weight approx.
[kg/each]
Article No.
HE 4 30 685 700 588 567 657 671 9 80 – 32 170 268 000
HE 51 50 880 895 783 762 852 866 9 80 16 43 170 270 000
HE 61 65 1090 1105 993 972 1060 1074 9 80 18 52 170 274 000
HE 121 80 1100 1108 986 959 1060 1074 10 90 18 69 170 278 000
HE 181 100 1100 1108 986 959 1060 1074 10 90 18 69 170 279 000
HE 1100-221 120 1100 1108 986 959 1060 1074 10 90 18 69 170 289 000
HE 1200-221 130 1200 1208 1086 1059 1160 1174 10 90 18 76 170 295 000
HE 1300-22 140 1300 1308 1186 1159 1260 1274 10 90 – 84 170 296 000
SO 1000-24 120 987 1000 871 844 952 966 10 90 – 72 –
SO 1100-241 160 1095 1108 979 952 1060 1074 10 90 18 82 170 264 001
Delivered state: primed, not bored or bored
1 bored
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Ball steering turnplate / Jost Product line HE and SO
17.01.01.4
Ball steering turnplate, maintenance-free
Product line KDL 900 and KDL 900 W for special vehicles
Jost Product line KDL 900 and KDL 900 W
Type Permitted axial load
[kN]
ø A
[mm]
ø B
[mm]
ø C
[mm]
ø D
[mm]
ø E
[mm]
ø F
[mm]
ø G
ca. [mm]
ø H
ca. [mm]
Weight approx.
[kg/each]
Article No.
KDL 900-2 W 80 650 539 542 432 620 462 501 581 32 170 422 000
KDL 900-3 W 120 750 639 642 532 720 562 601 681 39 170 423 000
KDL 900-4 W 150 850 739 742 632 820 662 701 781 45 170 424 000
KDL 900-5 W 180 950 839 842 732 920 762 801 881 51 170 425 000
KDL 900-6 W 210 1050 939 942 832 1020 862 901 981 57 170 426 000
KDL 900-7 W 250 1200 1089 1092 982 1170 1012 1051 1131 67 170 427 000
Delivered state: primed, not bored
Material C45, hardened tracks
1 until KDL 900-6W 4 blind plugs, KDL 900-7W 6 blind plugs
The dimension specifications are subject to the work tole-
rances.
The stated axial loads refer to the utilisation in fifth wheel
steerings at a speed of up to 105 km/h.
Please ask for the permitted loads by indicating the vehic-
le specifications, if utilised in forcibly steered semi-trailers.
The load data is valid for the operation on paved roads
and transport concerns, as it is common practice in Middle
Europe.
Mounting reference is made available on request.
1
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Ball steering turnplate / Jost Product line KDL 900 and KDL 900 W
17.01.01.5
Double ball steering turnplate
For truck trailers, semi-trailers, heavy vans and
special vehicles up to 105 km/h, bored
BPW Product line DK
Type Permitted
axial load
[t2]
Permitted
total
weight of
trailers
[t]
ø A
[mm]
ø B
[mm]
ø C
[mm]
ø D
[mm]
ø E
[mm]
ø F
[mm]
ø G
[mm]
ø H
[mm]
ø J
[min]
Weight
approx.
[kg/each]
Article No.
DK 80/5 5 25 664 636 519,5 14 9 650 622 554 80 38 170 220 000
DK 80/8 8 40 894 866 749,5 16 9 880 852 784 80 49 170 222 000
DK 80/10 10 50 1108 1074 959,5 16 9 1095 1060 994 80 64 –
DK 80/16 A3 16 50 894 866 749,5 16 10 880 852 784 80 49 –
DK 90/10/1208 10 50 1208 1174 1042,0 18 10 1195 1160 1079 90 92 –
DK 90/10/1212 10 50 1208 1174 1042.0 18 10 1195 1160 1079 90 92 170 227 000
DK 90/121 12 50 1000 966 834,0 18 10 987 952 871 90 72 170 228 000
DK 90/13 13 55 1108 1074 942,0 18 10 1095 1060 979 90 82 –
DK 90/13/1208 13 55 1208 1174 1042,0 18 10 1195 1160 1079 90 92 –
DK 90/13/1212 13 55 1208 1174 1042,0 18 10 1195 1160 1079 90 92 –
DK 90/14 14 55 1000 966 834,0 18 10 987 952 871 90 72 –
DK 90/16 16 60 1108 1074 942,0 18 10 1095 1060 979 90 82 170 232 000
DK 90/16/1212 16 60 1208 1174 1042,0 18 10 1195 1160 1079 90 95 –
DK 90/20 20 60 1108 1074 942,0 18 10 1095 1060 979 90 82 170 233 000
DK 90/20/1212 20 60 1208 1174 1042,0 18 10 1195 1160 1079 90 95 –
DK 90/26/1212 26 70 1208 1174 1042,0 18 10 1195 1160 1079 90 96 –
DK 90/30/1212 SP 30 70 1208 1174 1042,0 18 10 1195 1160 1079 90 96 –
1 Not bored
2 Permitted axial load = static axial load above steered axle, which affects the steering ring
3 Only to use for semi-trailer couplings
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Ball steering turnplate / BPW Product line DK
17.02.01.1
Car trailers
Technical Data
Screw set for the VARIOBLOC®
VARIOBLOC® complete
— Multi-functional alternating system for delivery vans,
all-terrain vehicles and buses in connection with a pin
hitch, hook trailer hitch and hitch ball
— Suitable for towbar bracket systems and implements
— Comprises: Base plate, quick-change plate and protective
cap
Type approval: ECE 010044
Part No.: VAO 2AG010 (100 AO 1000)
Weight: approx. 2.7 kg/each
Article No. 170 600 000 – Hole pattern 83 x 56
(European)
Additional quick-change plates
Hole pattern: 83 x 56 mm (European) Article No.
170 632 000
Application possibilities
ROCKINGER hook coupling
Type 231
Clutch ball with flange and corre-
sponding illustration of holes, whose
centre lies inside the defined areas
(see TECHNICAL SPECIFI CATIONS in
the operating and mounting
instructions).
ROCKINGER bolt coupling
Type 243 (all types)
Type Hole plate D-value
[kN]
Tongue load
[kg]
Dc-value
[kN]
V-value
[kN]
VARIOBLOC 83 x 56 30,0 250 30,0 12,0
The max. load value of the weakest component from the combination of vehicles, VARIOBLOC® and coupling may not be exceeded.
The VARIOBLOC® is subject to registration into the registration papers.
For base plate
Part No. Vehicle type Number Dimensions Article No.
70756 MB Sprinter
VW LT 28-46
2 M 10 x 30 170 635 000
M 10 x 50
70570 Standard 4 M 10 x 55 170 637 000
70558 Standard 4 M 10 x 60 170 638 000
70754 MB Sprinter
VW LT 28-46
4 M 10 x 110 170 639 000
For A.C. plate
Part No. Vehicle type Number Dimensions Article No.
70755 Standard
Bolt, hook, ball
coupling
4 M 10 x 50 170 641 000
70757 Standard
ball coupling
4 M 10 x 60 170 642 000
70758 Standard
ball coupling
4 M 11 x 65 170 643 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
170 604 010 170 612 000 170 605 000
170 605 000 170 608 000170 606 000
170 609 000
17.02.01.2
Coupling balls with screw-down plate
Car trailers
Part No. Tongue load
[kg]
D-value
[kN]
Weight approx.
[kg/each]
Article No.
329 089 150 17,5 2,8 170 604 010
329 072 150 17,5 3,7 170 605 000
329 042 100 17,2 4,4 170 608 000
329 103 120 25,1 8,5 170 606 000
329 059 150 23,5 3,0 170 609 000
329 062 150 23,5 3,6 170 612 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
170 614 000
170 615 000
17.02.01.3
Car trailers
Article No.
170 614 000 170 615 000
Ball diameter 50 mm 50 mm
Thread M 22 x 1.5 M 20 x 1.5
Height (incl. thread) approx. 165 mm approx. 140 mm
Permissible trailer load 3500 kg 2000 kg
D-value 31.0 kN 18.5 kN
Official test mark E1-55R-010809 E1-55R-011525
Material steel, raw steel, raw
Weight 1.11 kg/each 1.11 kg/each
Universal trailer bracket
For trucks and off-road vehicles, permitted for coupling
ball with mounting plate or open-end coupling
Part-no. 314 052
Tongue load: 150 kg
D-value: 23,5 kN
Official test mark: E13-58R-02 6030
Material: steel, primed
Weight: 76,0 kg/each
Article No. 170 603 010
Coupling ball with mounting plate or if necessary open-end
couplings are not included in the extent of supply, please
order separately if necessary.
Coupling ball with threaded stem 2,0 and 3,5 t
With castle nut and plain washer,
according to DIN 74 05 8-50
Article No. 170 614 000 – 3.5 t
170 615 000 – 2.0 t
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
17.02.01.4
Pulling ball hitch ”line EM“
— For passenger vehicle trailers
— Towbar connection round and square
Ball diameter: 50 mm
Material: sheet steel or cast iron,
electro galvanised
Car trailers
Type Permitted
total trailer weight
[kg]
Permitted
tongue load
[kg]
Towbar connection
ø
[mm]
Bore
ø
[mm]
Figure similar Article No.
EM 80 R-E 800 75 50/51 11,0 1 116 671 000
EM 80 V-E 800 75 50 11,0 1 116 672 000
EM 80 R-F 800 75 60 11,0 1 116 673 000
EM 80 V-F 800 75 60 11,0 1 116 668 000
EM 80 R-G 800 75 70 12,5 2 116 675 000
EM 80 V-G 800 75 70 11,0 1 116 674 000
EM 150 R-A 1500 100 45/46 12,5 3 116 676 000
EM 150 R-B 1500 100 50/51 12,5 3 116 678 000
EM 150 R-G 1500 100 70 12,5 2 116 677 000
EM 220 R-A 2200 100 45/46 12,5 3 116 669 000
EM 220 R-B 2200 100 50/51 12,5 3 116 670 000
EM 300 R-A 3000 150 45/46 12,5 4 116 680 000
EM 300 R-B 3000 150 50/51 12,5 4 116 679 000
EM 350 R-B 3500 200 50/51 12,5 5 116 681 000
EM 350 R-B 3500 200 50/51 14,5 5 116 681 001
EM 300 R-BH 3000 150 45/46+50/51 12,5 6 116 665 0001
EM 350 R-CH 3500 200 60 14,5 7 116 666 000
EM 350 R-D 3500 200 65 14,5 8 116 667 000
EM 350 R-D 3500 200 65 12,5 8 116 667 001
EM 350 R-C 3500 200 60 12,5 5 116 664 000
1 Universal form of construction with reducing piece, matching diameter 45/46, 50/51 (crosstype screw fitting) and diameter 50 (horizontal screw fitting).
Figure 3
(sheet steel, galvanised)
Figure 6
(cast iron, galvanised)
Figure 4
(cast iron, galvanised)
Figure 5
(cast iron, galvanised)
Figure 7
(cast iron, galvanised)
Figure 8
(cast iron, galvanised)
Figure 1
(sheet steel, galvanised)
Figure 2
(sheet steel, galvanised)
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
17.02.01.5
Car trailers
Pulling hitches ”line WW“
— For car trailers
— Towbar connection round
Ball diameter: 50 mm
Material: cast iron, electro galvanised
Figure 1
(cast iron, galvanised)
Safety coupling with directional stabilisation WS 3000
— For the attenuation of snaking and pitching
— Single-level system to hitch up and to stabilise
— Execellent angular flexibility during the manoeuvre
— Extremely large friction elements – long running time
— Large spring assembly – constant pressure
— Easy to read tread wear indication
— Friction elements interchangeable without any difficulties
Permitted total
Weight: 3000 kg
Permitted Tongue
laod: 150 kg
Bore ø: 12,5 mm
EU-permission: No. 00-0065 e1
Material: steel, galvanised
Weight: approx. 5,8 kg/each
Article No. 116 730 000
On the basis of the fitting parts, that belong to the extent of supply,
appropriate for Towbar connection 35, 40, 45 and 50 mm
Type Mark of
conformity
Permitted
total trailer weight
[kg]
Permitted
tongue load
[kg]
Towbar
connection ø
[mm]
Bore
ø
[mm]
Figure
similar
Article No.
WW 200 C7 F 3054 3000 150 70 13,0 1 116 721 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
17.02.01.6
Theft protection
— Appropriate to all ball-shaped couplings
— Extremely robust and solid model
— Against unauthorised towing of two-wheel trailers
— Very simple to handle
Material: safety device – steel, galvanised
lock - stainless steel
Weight: 170 731 000 – approx. 2,24 kg/each
170 732 000 – approx. 0,25 kg/each
170 734 005 – approx. 0,25 kg/each
Article No. 170 731 000 – safety device
100 x 100 mm
170 732 000 – lock
170 734 005 – lock closing at once
Loose for ease of replacement:
Safety angle Part No. 170 733 000
Weight approx. 0,27 kg/each
ALBE SAFETY Box anti-theft device
— The cargo trailer lock that offers optimised security,
superior engineering and an attractive design
— Suitable for all trailer hitch ball couplings
— The locking latch can be inserted from either side
— The discus padlock can be fitted underneath together
with the hasp to protect it from weathering
Material: Security lock – Steel electro-galvani-
sed / yellow, sealed
Hasp – Stainless steel
Weight: 170736 – approx. 2.03 kg/each
170732 – approx. 0.24 kg/each
Article No. 170 736 000 –safety device
170 732 000 – lock
170 734 005 – lock closing at once
Car trailers
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
17.02.01.7
ALBE SAFETY-Box XL
— The ALBE SAFETY Box XL (foldable) cargo trailer lock that
prevents trailers from being coupled or uncoupled
— Trailer lock make: ALBE Berndes, type: Safety Box XL
— Hinged to enable the box to be fitted even when the trailer
is coupled
— Suitable for virtually every standard hitch ball coupling
(except for anti-snaking couplings)
— Extra-strong locking bar with 3 insertion points, insertable
from either side
Material: Security lock – Steel electro-galvanised /
yellow, sealed
Hasp – Stainless steel
Weight: 170738 – approx. 1.96 kg/each
170732 – approx. 0.24 kg/each
Article No. 170 738 000 –safety device
170 732 000 – lock
170 734 005 – lock closing at once
Car trailers
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Car trailers
17.02.02.1
Tow bars
With welded DIN-trailer coupling ring
Ring ø: 40 mm
Shank ø: 50 mm
Material: steel, primed
Tow bars
Type
[t]
Steel tube ø
[mm]
Length (L)
mid - mid trailer coupling ring
[mm]
Prime Weight
approx.
[kg/each]
Article No.
up to 16,0 60 x 4 1900 red 15,5 170 579 000
2250 red 17,5 170 582 000
up to 32,0 64 x 6 2000 blue 21,0 170 587 000
2400 blue 25,0 170 586 000
2500 blue 27,0 170 589 000
Rest for tow bar
— Consists of a bottom palte 80 x 80 x 6 mm with four
mounting holes ø 8 mm
— Hole plate 56 x 56 mm with securing tube of 80 mm
length 38 mm ø with bore
— For safety device through spring connector 6 mm
Material: steel, primed
Weight: approx. 0,6 kg
Article No. 170 592 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Tow bars
172 250 000
172 252 000
172 253 000
172 254 000
17.02.02.2
Break down coupling
Type Bolt ø
[mm]
Hole plate
[mm]
Permissible towed
load
EWG Weight
approx.
[kg]
Article No.
77/389 79/533
Trailer
[kg]
Towing vehicle
[kg]
230 B 35000 32 120 x 55 25000 50000 x x 4,0 172 250 000
205 A 50000 35 160 x 100 25000 100000 – – 6,7 172 252 000
205 A 51000 35 160 x 100 50000 120000 x – 6,7 172 253 000
207 A 45000 35 140 x 80 25000 50000 – – 6,0 172 254 000
Break down coupling
— Non-self-instructed sliding, shunting and-
breakdown coupling, permitted total
Material: steel, primed
Loose for ease of replacement:
coupling bolts appropriate for
230 B 3500 - Part No. 172 256 0006 000
Official notice:
Breakdown couplings are not subject to design certifications (Germany: 22a StVZO). The intended purpose is limited to
the towing of non-operating vehicles or in exceptional cases for manoeuvres. Usage for the operation on trailers is not
permitted.The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Break down coupling
360+1021
0±10
243±5
ø 48,7
140±5
68±5
155±4
90±3
17.02.03.1
Retrofitting kits
Electrical remote indicator
Cabin 70936 up to RO 400 XXX C - Article No. 172 042 000
Cabin 71654 up to RO 400 XXX C - Article No. 172 042 010
Compact coupling
— For industrial trucks and trailers
— For 40 mm trailer coupling rings
(DIN 74054)
All-automatic trailer hitch
Product line 400
— For 40 mm trailer coupling rings
(DIN 74054)
— Most commonly standard coupling
spring mounted
— One-level operation, hand lever
upwards
Trailer couplings for 40 mm rings (DIN 74054)
Type Hole plate
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Weight
approx.
[kg/each]
Article No.
400 A 36001 120 x 55 70 70,0 24,01 7001 010352 30,0 172 035 000
400 A 46001 140 x 80 100 91,5 31,2 1000 010351 33,0 172 037 000
400 A 51001 160 x 100 130 90,0 35,0 1000 010350 35,0 172 039 000
1 At tongue load 500 kg V-value 26,4 kN
Type Hole plate
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Weight
approx.
[kg/each]
Article No.
244 A 35002 120 x 55 42 30 8,4 250 011802 6,0 172 242 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer couplings for 40 mm rings (DIN 74054)
B
A
d-ø
17.02.03.2
Trailer couplings for 40 mm rings (DIN 74054)
Type Hole plate
[mm]
A
[mm]
B
[mm]
d ø
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity
ECE
Weight
approx.
[kg/each]
Article No.
243 A 11000 83 x 56 110 85 10,5 30 18 12 115 010031 4,1 172 240 000
243 B 11000 83 x 56 110 85 10,5 30 18 12 115 010031 4,1 172 240 001
243 A 35000 120 x 55 155 90 15,0 30 30 12 135 010051 4,4 172 241 000
Compact coupling
— For vans, delivery cars, off-road vehicles Safe-
ty open-end size 100 x 150 mm
— For 40 mm trailer coupling rings (DIN 74054)
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer couplings for 40 mm rings (DIN 74054)
129
90
210
361
250
140+100
17.02.03.3
210±1
0360+10
0
Fully-automatic trailer hitch
E 525 A6 series
— With remote indicator
Fully-automatic trailer hitch
500 series
— Suitable for:
Drawbar eyes: 50 mm ISO 1102, DIN
74053 and EG/ECE Class D50
Towing vehicle classes N2 and N3
Trailer classes O3 and O3
— With remote indicator
Trailer couplings for 50 mm rings (DIN 74053)
Type Hole plate
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Weight
approx.
[kg/each]
Article No.
500 (500 A 66200) 160 x 100 200 140 90 1000 R 55-01 1844 50,0 172 077 000
Type Hole plate
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Weight
approx.
[kg/each]
Article No.
E 525 A6 160 x 100 200 135 75 1000 R 55-01 1046 42,0 170 804 010
50 2500
Accessories:
Mechanical ROCKINGER distance control Article
No. 170 556 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer couplings for 50 mm rings (DIN 74053)
17.02.04.1
Underrun protection, folding
— Type WUF 105 K
— Suitable for all trucks with gas spring support and
one-sided locking bar
— Supplied as 3 components, suitable for any frame width
— EC-Type-Approval Certificate No. *70/221*2006/20*0705
Cross tube length: 2350 mm
Pivot angle: 30°
Min. frame width: 700 mm, max. 1500 mm
Material: Steel, KTL-coated, black
Trailer brackets und accessories
Type A
[mm]
B
[mm]
C
[mm]
Weight approx.
[kg/each]
Article No.
Universal 650 624 378 69,74 170 558 500
Suitable for MB Actros 4 650 624 378 66,21 170 558 100
Suitable for MB Actros 4
hot-dip galvanised
650 624 378 66,21 170 558 101
2350
ø 10
8
Hand-tighten the screw fitting on the support shaft to the mounting plate ensuring there is no clearance.
Tighten the clamp screw fitting until the cross tube sits securely without clearance and cannot slide.
Range of adjustment 758 to 1500
A
A
60
7
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
75
119
B
C
A
16058,5
120
290
25020
75
155 50
5025
40
A-A
ø 1712
0
58,5160
4055
ø 16
45 B119
A
C
80
60
20
15 50 50 200
335
40
140
180
A-A
17.02.04.2
Article No. 170 558 100 Article No. 170 558 500
Trailer brackets und accessories
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
2350
ø 10
8
758-1500
5050
50
ø 16,5
80
B7
A
a ø 11
LW max. 866+2/0B
ø D
A
ø d
mit Schlußtraverse Typ: STM
135/35 und Seitenblechen
Anhängebock Typ: W
UB 3507
D-33178 Borchen
Fahrzeugtechnik Gm
bH
zul. Dc-W
ert: 80 kNzul. D
-Wert: 100 kN
Hersteller:
Prüfnumm
er
28 kN30,3 kN32,7 kN35 kN
Stützlast zul. V-Wert
700 kg 800 kg 900 kg1000 kg
17.02.04.3
Towing bracket, bolted
(WUB 3507)
Surface: black, KTL-coated
(optional extra: hot-dip
galvanised surcharge
applies)
Pre-fitted on request:
— Orlandi E404
— Circlip 4040A/G145
— Rockinger 400A46
Trailer brackets und accessories
Towing bracket with trailer hitch ball coupling
(WUB – ZKK)
In conjunction with WAP underrun protection
WUF 100 SRK
Type A
[mm]
B
[mm]
D ø
[mm]
d ø
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
Perm.
V-value
[kN]
Perm. tongue
load,
[kg]
Article No.
WUB 3507 120 55 76 15 100 80 35,0 700 –
32,7 800
30,3 900
28,0 1000
WUB 3507 140 80 86 17 100 80 35,0 700 –
32,7 800
30,3 900
28,0 1000
Type Hole spacing Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Weight
approx.
[kg/each]
Article No.
4-hole
installation
2-hole
installation
A
[mm]
a
[mm]
B
[mm]
A 83 56 90 30,95 30,95 150 E4-55R-010320 73,43 170 557 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
17.02.04.4
Towing bracket, bolted
(WUB 601 / 751 / 901)
Surface: black, KTL-coated
(optional extra: hot-dip
galvanised
surcharge applies)
Optionally available with pre-drilled holes in
upper section.
Pre-fitted on request:
— Orlandi E525
— Rockinger 500 A 66
— Circlip 4040 A
— Circlip 5050 A
Side panel for towing bracket
(WUB 3507)
Optionally available with pre-drilled holes in upper section.
Trailer brackets und accessories
Type A
[mm]
B
[mm]
D ø
[mm]
d ø
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
Perm.
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Article No.
WUB 601 160 100 96 21 140 110 60 1000 E4-55R-10670 –
WUB 751 160 100 96 21 190 130 75 1000 E4-55R-10671 –
WUB 901 160 100 96 21 200 140 90 1000 E4-55R-10672 –
Clearance width CW max.
A
D-ød-ø
B
866+20
Baujahr
D-33178 Borchen
Fahrzeugtechnik Gm
bHH
ersteller:
mit Schlußtraverse Typ: STM
150/60 und Seitenplatten
Anhängebock Typ: W
UB 601
Stützlast zul. V-Wert
60,0 kN56,7 kN51,8 kN
1500 kg1200 kg1000 kg
zul. D-W
ert: 140 kNzul. D
c-Wert: 110 kN
e100-1209 Kl. F
Prüfnumm
er
Ausführung
Type H
[mm]
L
[mm]
B
[mm]
AH 400 500 300
AH 460 560 320
AH 490 590 340
AH 580 680 360
100
min. 50
min. 50
min. 35
L
min. 3 x 50
min. 3 x 50H
B
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
17.02.04.5
Side panel for towing bracket
(WUB 601 / 751 / 901)
Trailer brackets und accessories
Type H
[mm]
L
[mm]
B
[mm]
G
[mm]
Weight
approx.
[kg]
AH / AV 525 415 390 – 25
550 440 397 – 26
590 480 410 – 29
620 510 418 – 31
650 540 427 – 32
680 570 437 – 35
720 610 447 – 37
750 640 458 – 40
800 690 474 – 44
850 740 490 – 46
B 525 415 513 112 25
550 440 529 118 27
590 480 558 113 29
620 510 526 143 30
650 540 542 152 32
680 570 560 162 34
720 610 584 176 35
750 640 600 185 37
800 690 695 202 44
850 740 659 218 48
Remote cable activation for bolted-on towing brackets
(WUB 601 / 751 / 901)
— With guide pipe and bracket
— Dual swivel
Type AH
Type B
Type AV
Direction of travel
B
L
110
H
B
L
110
B
L
110
H H
G
Direction of travelDirection of travel
B
L
110
BL
110
H H
G
Direction of travelDirection of travel
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
17.02.04.6
Towing bracket, welded
(WUB 18/1)
Surface: black, KTL-coated
Pre-fitted on request:
— Orlandi E525
— Rockinger 500 A 66
— Circlip 4040 A
— Circlip 5050 A
Trailer brackets und accessories
Type A
[mm]
B
[mm]
D ø
[mm]
d ø
[mm]
Perm.
D-value
[kN]
Perm.
Dc-value
[kN]
Perm.
V-value
[kN]
Perm. tongue
load, static
[kg]
Mark of
conformity ECE
Article No.
WUB 18/1 160 100 96 21 140 125 60 1000 E4-00-2723 –
WUB 18/2 160 100 96 21 140 125 75
60
1000
2000
E4-00-2723 –
Design: straight
18/1
Design: offset
18/1 und 18/2
BClearance width CW
A
d-ø
D-ø
12
Insta
llatio
n he
ight
IH
Direction of travel
10
Direction of travel
100 420„c“
90
250
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
17.02.04.7
Trailer brackets und accessories
Remote cable activation for welded-on towing brackets
(WUB 18/1)
With guide pipe and bracket, with swivel function
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Couplings / Trailer brackets und accessories
230
550
200
280±2
320±5
16±1 21±4
75 40°+1
°
137±3
390±5
671
512±7
165±5
120±5
8+2 -1
17.03.01.1
Fifth wheel coupling
Fifth wheel coupling – JSK 26D
— Compact 2” coupling for delivery vehicles
— Sturdy pressed steel design
— Approved for forced steering
Type Total Height
± 5
[mm]
Load of
semitrailer
[kg]
D-value
[kN]
Weight
approx.
[kg]
Total weight of
the convoy
[kg]
Mark of
conformity
Article No.
JSK 26D 120 6000 50 45 12000 E1 55R-01 1800 176 014 001
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Fifth wheel coupling / Fifth wheel coupling
17.03.01.2
Fifth wheel coupling
Steering wedge, spring mounted SK 2122-40
— Forcibly steered fifth wheels, according to DIN 74054
— Appropriate for the utilisation in 2“ and 3 1/2“
fifth wheel plates according to DIN 74081 or 74084
correspond to the piggy-back traffic requirements
Weight: approx. 12,2 kg/each
Article No. 176 498 000
Mounting instructions are made available on request.
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Fifth wheel coupling / Fifth wheel coupling
ø 260ø 235ø 200
ø 150
BA
84
ø 2"
8 x M 14
*190±10 Nm
17.03.02.1
King pillars for fifth wheels 2“
— Changeable from below
— According to DIN 74080 or ISO 337
Jost and SAF King pillars
Type D-value
[kN]
Thickness of semi-trailer plate Mark of
conformity ECE
E1 55R-01
Article No.
A
[mm]
B
[mm]
KZ 1008 162 8 37 E1 55R-01 0145 176 033 000
KZ 1010 162 10 34 E1 55R-01 0145 176 035 000
KZ 1012 162 12 33 E1 55R-01 0145 176 031 000
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Fifth wheel coupling / Jost and SAF King pillars
17.04.01.1
EWG-type authorisation according to directive 94/20/EU
Size of coupling and drawbar eye
— Coupling parameters
— Towing vehicle and trailer parameters
(see vehicle registration certificate)
— Drawbar eye parameters
Size of coupling and drawbar eye
— Hole pattern in towing vehicle crossbar
— Hole pattern for coupling flange
— Bolt size for coupling
Towing vehicle and articulated drawbar trailer:
The D-value
— Theoretical drawbar force between the towing ve-
hicle and trailer, mathematical comparative value of
forces between moving masses
— The D-value can only be determined using the maxi-
mum permissible weight of the two factors (towing
vehicle and articulated drawbar trailer).
Towing vehicle and central axle trailer:
The Dc-value only applies in conjunction with the
V-value.
— Theoretical drawbar force between the towing ve-
hicle and trailer, mathematical comparative value of
forces moving masses
— The Dc-value can only be determined using the
maximum permissible weight of both factors (towing
vehicle and central axle trailer).
How to calculate the Dc-value (kN)
Dc (kN) = g · T · C
T + C
T : total weight of towing vehicle in t
C : Sum of the axle loads on the central axle trailer in t
g : acceleration of gravity 9.81 m/s2
The calculated Dc-value may be equal to or lower than
the Dc-value of the coupling or drawbar eye.
How to calculate the D-value (kN)
D (kN) = g · T · R
T + R
T : total weight of towing vehicle in t
R : total weight of articulated drawbar trailer in t
g : acceleration of gravity 9.81 m/s2
The calculated D-value may be equal to or lower than
the D-value of the coupling or drawbar eye.
If the coupling is used on the trailer as permitted:
D (kN) = g · R1 · R2
R1 + R2
R1: total weight of trailer to which the coupling
is attached (max. 24 t) R1 ≥ R2
T R
D
D
RT
T
Dc
C
T
Dc
C
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Technical Information / EWG-type authorisation according to directive 94/20/EU
17.04.01.1
EWG-type authorisation according to directive 94/20/EU
Central axle trailer: Static vertical load S
Only applies in conjunction with the V-value
— Vertical load at the hitch point caused by the central
axle trailer
— The maximum possible static vertical load depends on
the size of the hitch and amounts to 10% of the trailer‘s
total mass or 1000 kg (whichever is smaller).
Higher values are also possible.
— The static vertical load should be at least 4% of the
trailer’s weight so as to avoid any detrimental negative
vertical load.
Central axle trailer:
The V-value only applies in conjunction with the
Dc-value.
— Vertical load caused by central axle trailer
— Dependent on the rear suspension of the towing
vehicle
How to calculate the V-value (kN)
V (kN) = a · X2 · C
I2
a : Comparative acceleration at the hitch point in m/s2
a = 1.8 for vehicles with rear axle air suspension
a = 2.4 for vehicles with other type of suspension
l : Theoretical drawbar length in m
x : Length of loading area in m
x2/l2: minimum 1.0
C : Sum of the axle loads on the central axle trailer in t
The calculated V-value may be equal to or lower than the
V-value of the coupling or drawbar eye.
x
C
C
l
V
l
V
x
x
C
C
l
V
l
V
x
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings / Technical Information / EWG-type authorisation according to directive 94/20/EU
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings
Notes
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings
Notes
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy. D
esi
gns
are s
ubje
ct t
o c
han
ge.
Titgemeyer / 10066EN0719 / 1
Couplings
The t
ech
nic
al s
peci
fica
tions
conta
ined i
n t
his
bro
chure
are
appro
xim
ate a
nd n
o g
uar
ante
e i
s gi
ven a
s to
their
acc
ura
cy!
Desi
gns
are s
ubje
ct t
o c
han
ge. O
ur
desi
gn p
roposa
ls a
re n
on-b
indin
g!
TIT
GEM
EY
ER
. G
ETO
Van
and P
OP
are
tra
dem
arks,
regi
stere
d t
radem
arks
or
pro
duct
nam
es
belo
ngi
ng
to t
he r
esp
ect
ive t
itle
hold
er.
Titgemeyer GmbH & Co. KG
Hannoversche Straße 97
49084 Osnabrück / DE
P.O. Box 4320
49033 Osnabrück / DE
T +49 541 5822–0
W titgemeyer.com