Transparently Bridge Two Networks Without Using WDS (EoIP) - MikroTik Wiki
7
Transparently Bridge two Networks without using WDS (EoIP) Contents 1 Server Setup: 1.1 Server IP Addresses 2 Client Setup: 2.1 Client IP Addresses 3 Check your setup Server Setup: Server IP Addresses / ip address add address=192.168.0.1/24 interface=ether1 disabled=no / ip address add address=192.168.1.1/24 interface=wlan1 disabled=no
Transcript of Transparently Bridge Two Networks Without Using WDS (EoIP) - MikroTik Wiki
Transparently Bridge two Networks without using WDS (EoIP)
Contents
1 Server Setup:
1.1 Server IP Addresses
2 Client Setup:
2.1 Client IP Addresses
3 Check your setup
Server Setup:
Server IP Addresses
/ ip address add address=192.168.0.1/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.1/24 interface=wlan1 disabled=no
Client Setup:
Client IP Addresses
/ ip address add address=192.168.0.2/24 interface=ether1 disabled=no
/ ip address add address=192.168.1.2/24 interface=wlan1 disabled=no
Note that this image is incorrect - Set the Mode to Station and it will work fine then