TRANSMISSION OILS FOR

MANUAL GEARBOXES

OUR PRODUCT RANGE

Info Are you uncertain about the type of lubricant you need for your vehicles and machines? Contact our technical service department, we’ll be pleased to help you choose the optimal product for you.

Help Line +32 (0) 2 365 02 00 or send us a mail at info@unil.com

Motor oilsS Synthetic and mineral oils, for light

petrol up to heavy diesel enginesS Two-stroke motor oils

Transmission oilsS Mineral and synthetic S Multi grade, API GL4 & GL5 S ATF oils

Hydraulic liquidsS Filtered Hydraulic oils (Nas 6) S Zinc-free and zinc-containing hydraulic oils S Biodegradable oils S Nonflammable hydraulic liquids

Specialities for the industryS Compressor oils S Compressed air lubrication S General lubrication S Transformer oils S Gearbox oils S Thermal oils S White oils

SpraysS Silicone spraysS Sprocket & gear wheels S Anticorrosion S Tapping oils S Brake cleaner S Penetrating oils S White grease S Food grade qualityS PTFE

Winter productsS Antifreeze S Coolants S Windscreen washer fluids

Metalworking fluidsS Water miscible and neat oils for all ferrous and non-ferrous metalsS Forming oilsS Grinding fluids S Rust preventive oils S Vanishing oils S Spray oils S Slideway oils

Food-grade lubricantsS Lubricants for the food industry

(USDA H1/NSF)

GreasesS Greases for bearings S Multi purpose greases S Greases with PTFE, graphite and MoS2 additives S Biodegradable greases S Greases for high temperatures S Specialities

High quality range for motorcyclesS Oils for motor, transmission, fork

and chains

EquipmentsS Grease pumps S Skimmers S Refractometers S Filtering devices S Dosage pumps S Hose reels S Spill trays

Agriculture & ForestryS Chain saw oils S Biodegradable oils and greases S Two-stroke and four-stroke oils

Cleaning productsS Degreasing agents S Hand soaps S Oil absorbing granulates

UNIL LUBRICANTSSINCE 1903

BELGIUMBergensesteenweg 7131600 Sint-Pieters-LeeuwTel. +32 (0)2 365 02 00Fax +32 (0)2 360 01 12

info@unil.comorders@unil.com

www.unil.com

ISO 9001 - ISO 14001Certified

PRODUCT SAE DESCRIPTION NORMS SPECIFICATIONS

GERION LS 75W9075W140

100% synthetic EP-oils (extreme pressure), especially developed for the lu-brication of axles with a limited-slip differential. This type of axle is installed on numerous sports and racing cars, as well as on sports utility and public works vehicles.

API GL4/GL5-LS • MAN 341 Type E3 • MAN 341 Z2 • MAN M 342 M3 • SCANIA STO:01 • API MT-1 • DAF • IVECO • MB-Approval 235.8 • ZF-TE-ML 02B/01/12B/16F/17B/19C/21B

• Effective protection for the most severe hypoid gears under all operating conditions.

GERION DRIVE 75W9075W140

100% synthetic LONG DRAIN oil, designed for gearboxes and rear axles on industrial vehicles and excavation machinery that are subject to heavy loads. It is ideal for simplifying the supply of lubricants.

API GL4/GL5/MT-1 • ARVIN MERITOR 0-76-N • DAF • IVECO • MACK GO-J • MAN 341 Z2 • MAN M 342 M3 • MB 235.11 • MIL-PRF-2105 E • SAE J2360• SCANIA STO:01 • ZF-TE ML 02B/05B/07A/16F/17B/12B/19C/21B

• Excellent liquidity at low temperatures.• Extraordinary thermal stability.• Good antiwear properties.• Fuel savings thanks to the reduction of friction.

GERION EXTRA 75W90 Synthetic oil used, for instance, for gearboxes of passenger carsusing cold fluid oil (Renault, Peugeot, Citroën).

API GL4/GL5 • MAN 342 M1 • MB 235.0 • MIL-L-2105D • VOITH • VOLVO 97310/ 97316 • ZF-TE ML07A/16B/16C/16D/17B/19B/21A

• High viscosity index and good liquidity at low temperatures; makes changing gears easier.• Severe operating conditions possible thanks to excellent ‘extreme pressure’ properties.

GERION LE 75W80 For gearboxes of passenger cars, freight lorries, agricultural machines, earth-moving machines and forklift trucks, where API GL4 stan-dard oil is required. It is also suitable for medium-load rear axles and reverse clutches, if they fulfil the ‘extreme pressure’ requirement of the manufac-turer.

API GL4 • ZF-TE-ML 02D • MAN 341 Type E3/Z3 • DAF • IVECO • Volvo 97307 • RENAULT

• Strongly improved antiwear and extreme pressure properties, for an excellent protection of the gears.• Optimised lubrication during cold starts thanks to good liquidity at low temperatures.• Compatible with non-ferrous metals.• Thermal stability and good oxidation resistance that is required by high operating temperatures of modern transmissions.

GEAR EP 80W8580W9085W140

For gearboxes of passenger cars, freight lorries, agricultural machines, earth-moving machines and forklift trucks, where API GL4 stan-dard oil is required. It is also suitable for medium-load rear axles and reverse clutches, if they fulfil the ‘extreme pressure’ requirement of the manufac-turer.

API GL4 • MB 235.1 • MAN 341 Type E1/Z1 • ZF TE ML 02A/16A/17A/19A

• Increased ‘extreme pressure’ and antiwear properties.• Excellent lubrication at all temperatures.• High thermal stability.

GEAR LS 80W9085W9085W140

Extreme pressure (EP) oils that have been developed especially for the lu-brication of axles with a limited-slip differential. This type of axle is installed on numerous sports and racing cars, as well as on sports utility and public works vehicles.

API GL5-LS • Ford M2C 104A •ZF-TE-ML 05

• Increased ‘extreme pressure’ and antiwear properties.

GEAR ZF 80W9085W9085W140

For geared transmissions subject to heavy loads, such as gearboxes and hypoid rear axles of industrial vehicles, earthmoving machines, agricultural machines and those machines where the manufacturer recommends API GL5.

API GL5 • MB 235.0 • DAF • MAN 342 M1 • MIL-L-2105D • RENAULT • VOITH 3.325-339 • VOLVO 97310/97316 • ZF-TEML 01/05A/07A/16B/16C/16D /17B/19B/21A

• Increased ‘extreme pressure’ and antiwear properties.• Excellent lubrication at all temperatures.• High thermal stability.

MULTIGEAR 75W80 Synthetic oil used, for instance, for gearboxes of passenger cars using cold fluid oil (Renault, Peugeot, Citroën).

API GL5 • High viscosity index and good liquidity at low temperatures; makes c hanging gears easier.• Severe operating conditions possible thanks to excellent ‘extreme pressure’ properties.• Extraordinary thermal stability.

UNIVERSAL GEAR 80W90 This oil fulfils both the API GL4 and GL5 standards. It is ideal for simplifying the supply of lubricants.

API GL4/GL5 • Increased ‘extreme pressure’ and antiwear properties.