TRANSLUCENT

Polycarbonate

Multi-wall

Panel systems

• Skylights

• Canopies

• Walkways

• WallSystems

• Interiors

BDL Polycarbonate

PANEL systems

CO-EX'S BDL® is a system of standing seam modular panels used to create vertical and sloped glazing. It is suited for a range of applications from curved skylights to interiors. Thanks to its wide variety of accessories, the system is complete, versatile, lightweight, and easy to install.

CO-EX BDL panel system is highly versatile and suitable for a wide range of daylighting applications such as:

• SKYLIGHTS • WALKWAYS

• CANOPIES • WALLSYSTEMS

• INTERIORSYSTEMS

The CO-EX BDL polycarbonate panel offers many advantages when com-pared with other glazing alternatives. HIGHIMPACTRESISTANCE – 200 times greater than glass

LIGHTWEIGHT – less than 1 lb. per sq. ft.

TRANSLUCENT – controlled natural daylight

DOUBLESIDEDU.V.PROTECTION – either side may be exposed to the weather

FLAMESPREAD/SMOKEDEVELOPMENT – excellent behavioral properties

EASYTOINSTALL – complete system and accessories

SAVESENERGY – excellent thermal properties

HIGHLYFLEXIBLE – cold forms to a 11' radius, heat formed even tighter

•WideRangeofColors

• NoAdhesivesRequired

• CleanAestheticsCreated by Snap Covers

• ThermalMovementis Captured Internally within the System

• Uniquepanel construction

• SuperiorLightDiffusing Properties

• HighU.V.Resistance on Both Side

Photos courtesy of EXTECH® Exterior Technologies: Left top and bottom, Lessin Tennis Court Building, Englewood Cliffs, NJ, and Clean Town Car Wash, Pittsburgh, PA, right, SAIC Future Combat Systems Building, Washington, DC. Cover 2nd and 3rd from top, Lessin Tennis Court Building, Englewood Cliffs, NJ

Shown with polycarbonate connector

Polycarbonate1.30"

1.18

"

Aluminum

Steel

1.30"

1.18

"

1.30"

1.18

"

BDL16SYSTEM16mmPANELS CLEAR OPAL ICEMIST BRONZE GREEN BLUE

Light Transmission (%) 63 21 48 31 59 58

Shading Coefficient .77 .55 .68 .65 .74 .73

Solar Transmission (%) .67 .28 .59 .57 .65 .64

U-Value,Btu/ft2h°F 0.41 0.41 0.41 0.41 0.41 0.41

R-Value(1/u)ft2h°F/Btu 2.44 2.44 2.44 2.44 2.44 2.44

Shown with reverse steel joining connector

Shown with reverse aluminum joining connector

TECHNICALDATA• BDL16Thickness:0.62"(16mm)•Width:nominal23 5/8” (600 mm)• Length:upto39'• Colors:Clear,Bronze,Opal,Green, Opalescent,IceMistandBlue• PanelWt:16mm–.71lbs./sq.ft.• U.V.Protection:byco-extrusion, both sides• CC-1ClassifiedMaterial:Per ASTMD635• Flammability/SmokeDevelopment: PerASTME-84Class1/ClassAis available.• ColorChange:Nomorethan3 DeltaUnitsperASTMD2244-05 after 5 years, and 6 after 10 years – non pro-rated

CO-EXBDL16MeetsorExceedstheFollowingTests:

• ASTMD2843SmokeDensity• ASTMD1929SelfIgnition• ASTMD635BurningExtent• ASTME84PANEL CLIPS

feature the CO-EX "GRIPLOCK" Connection SystemExceedsAllOSHAFall Through and Point Load Requirements

GRIP LOCK

CONNECTORS

BDLSystemAcceptance:MEA-NewYorkCityMEA-#180-02-M

0.78"(20 mm)0.62" (16 mm)

23.62" (600 mm)

0.94"(24 mm)

MO

DU

LIT

50

0 L

P

Sealing

Joint

MODULIT500 LP

Lower profile with sill

Drainage holes

35

40

Sealing

Upper profileUpper profile

Joint

MODULIT 500 LP

Simple lower profileDrainage holes

35

40

CO-EX MODULIT 500 LP system is suitable for any verticaltranslucentglazingapplicationsuchas:

•CLERESTORYGLAZING•EXTERNALTRANSLUCENTWALLS

• INTERNALTRANSLUCENTPARTITIONS

USEOfPANELCLIPSIf necessary, due to the glazingheightortothehighloadrequir-ed,severalintermediarysupportsmust be installed and the fixingmustbemadewiththealuminumclips.

Theseclipsallowasolidanchoringbut do not prevent the thermalexpansion of the polycarbonatepanel.

ANCHOR TYPICAL DETAIL PANELDETAIL

modulit 500 lp

WALL systems

3.54"(90 mm)

Support

MODULIT 500 LP

Aluminum Hook

1.57"(40 mm)

.35"(9 mm)

CO-EXMODULIT500LPmeets or exceeds the following tests.

ASTMD2843 ASTMD1929

ASTMD635 ASTME84

Upper profile

Hinge

Opening Profile

40

MODULIT 500 LP

40

Drainage

Lower Profile

Joint

Opening Profile

Lower Profile

Drainage

Modulit 500 LP

Hinge

19.69" (500 mm)

UV Protected Side

20.86" (530 mm)

1.57"(40 mm)

1.57"(40 mm)

MODULIT500LPTECHNICALDATA

Thickness 1.57"(40mm)Width 20.86"(530mm)ModuleWidth 19.68"(500mm)RibDistance 1.57"(40mm)MaximumLength 39'oruponrequestThermalInsulation,Btu/ft2h°F U=.25

Colors Light Transmission Clear (8005) 68% Opal (8121) 47%UVProtection Co-extrudedonexternalside(bothsidesonrequest)Warranty 10yearsagainstyellowing,hail&lighttransmissionTemperature of use -22°F 248°FSound Insulation 23 dBThermalExpansionCoefficient .036ft / ft°F

CO-EX polycarbonate wall systems are ideal for use in verticalglazingforbothinteriorandexterioruse.Whencombinedwithcolorful lighting effects, interior walls can become translucentpanels that can change the mood of the room with a flick of aswitch.

These effects can be translat-ed into signage and tradeshowexhibit booths, which are eco-nomical, lightweight, and easyto transport. They are becom-ing a popular material for usein museums and retail estab-lishments where unique light-ing effects and economy aredesired.

Anidealclerestorymaterial,ourmodular wall system is perfectfor areas requiring natural day-light without harsh shadows.And, with all of our fine prod-ucts, our polycarbonate is co-extrudedwithU.V.protectiontoinsureyourinteriorcolorsresistfading.

CO-EXisa leadingproducerof polycarbonate modularpanelsystems.Ourstaffisatyour disposal to answer anyquestionsyoumayhavecon-cerning vertical, curved orpitched glazing. Our exten-sive range of quality sheettypes and systems will suitmostapplications.

If you require custom solu-tionstoaparticularproblem,our technicalstaff ishere tosupport you, from planningtoinstallationandallstepsinbetween.

Call today for

more information (800) 888-5364

TESTPERFORMANCE 1.Selfignitiontemp ASTM1929-3 2.Smokedensity ASTMD-2843 3.Burnextent ASTMD-635 4.Interiorflamespread ASTME-84 5.Colordifference ASTMD-2244-85 6.Acceleratedoutdoorweathering ASTMD4364 7.Yellowingindex ASTM1925 8.Hazeandluminoustesting ASTMD1003 9.Airinfiltration ASTME-283 10.Waterpenetration ASTME-331 11.Loadbearingcapability ASTME-330-90 12.Thermalperformancetest ASTMC1363 13.Solarproperties NfRC201 14.OSHAfallandwalkthroughprotection STD29CRf1910.23(e)(8) 15.OSHAlifesafetySTD29CfR500lbs ASTME-695-03

5AlexanderDr.,Wallingford,CT06492TEL:(203)679-0500•(800)888-5364•FAX:(203)679-0600E-MAIL:info@co-excorp.com•WEBSITE:co-excorp.com

WALL systemsINTERIOR

Suggested ARCHITECTURAL system TESTING

DS-11/2007

Photos courtesy of EXTECH® Exterior Technologies: above & below, Samsung Interior Partitions, NY, NY, right, Mercedes Traveling Exhibit

Tests and certifications available and subject to limitation on weight, section, colors, etc.

INT

ER

IOR

WA

LL