Translucent Coatings with a Wood Preservative … 01.12...translucent coatings that contain a...

Translucent Coatings witha Wood Preservative

Outdoors

3

HK STAINPremium translucent coating with a woodpreservative with 6 x protection

as of page 9

WOOD CREAM6 x protection with just one coat Clear wood preservative in cream form as apremium wood preservative primer

as of page 13

UV WEATHERPROTECTION STAINWater based, medium solid, translucentcoating with excellent UV protection

as of page 19

LONG TIME STAIN UVSolvent based, medium solid, translucentcoating with excellent UV protection

as of page 23

WOOD PRESERVATIVEPRIMERImpregnation agent with a wood preserva-tive for softwood

as of page 27

4

Protection and Beauty for Wood Outdoors

Along with the warmth and pleasant atmosphere that is radi-

ated in homes and gardens by the working material wood,

wood also offers many possibilities for individual decoration.

Wood is one of the most popular building materials but wood

used in outdoor areas requires effective protection if the beauty

of the wood is to be maintained over the long-term. In these

cases, a wood preservative is needed that penetrates deeply

into the wood yet allows the wood to breathe.

Remmers translucent coatings with a wood preservative reli-

ably protect wood for years through their high quality raw ma-

terials and pigments. Their long-term effect against fungi and

blue stain according to RAL Quality and Testing Provisions is

documented by a certificate and continuously controlled by

the German Institute for Quality Assurance and Labelling.

5

Along with decorative treatment, the following species ofwood need to be protected from blue stain and soft rot.HK Stain and Wood Cream are 2 in 1 products that takecare of both tasks:

American red oak Larch Beech Light Red Meranti Douglas fir Oregon Pine Eucalyptus Southern Pine Spruce Fir Pine Western Hemlock

Building elements that are exposed to weather require pro-tection with an approved wood preservative.

The following species of wood are very resistant and donot need additional protection against blue stain & soft rot.They can be treated with all of the translucent coatingspresented in this brochure:

Afzelia Oak American white oak Idigbo Bangkirai Niangon Basralocus Australian blackwood Opepe Utile Ekki Teak Dark Red Meranti Western Red Cedar Doussié

Protective treatment with an approved wood preserva-tive is not necessary.

Refining Wood with Translucent Coatings:

Active Wood Preservation & Refinement:

6

UV-Rays

The sun takes its toll on wood surfaces, not just throughits heat but also through its ultra-violet rays which pene-trate into the wood. Combined with precipitation, the suncan change the colour of unprotected wood in just a fewweeks to months, i.e. the wood turns a silver grey colour.Fine wood fibres on the surface of the wood then standupright and lose strength. Most of the undesired changesin the colour and surface can be prevented by the appli-cation of pigmented coatings. UV Weather ProtectionStain and Long Time Stain in the shade clear UV+ nowmake it possible for the first time to coat wood in outdoorareas with a clear coating and prevent the wood fromturning grey for a much longer period thanks to highly ef-fective UV blockers.

Blue Stain

Blue stain is one of the so-called discolouring fungi be-cause it forms visible, black-blue stains. Blue stain doesnot decay the wood itself but is unsightly and it also pavesthe way for other fungi that do decay wood (soft rot) be-cause they perforate the cell walls, making it easier for thewood to absorb water (capillarity).

The naturalEnemies ofWood

7

Moisture

Wood outdoors is continuously subjected to the influenceof moisture: Rain, dew, condensation, etc. cause themoisture content in wood to rise; evaporation reducesmoisture. This alternating process causes cracks to formon the surface. Through these cracks or through diffu-sion, the water that has penetrated must leave the woodagain; otherwise wetness remains beneath the surface,creating a nutrient medium for blue stain and other fungithat decay wood. That is why it is important to select theright coating for the wood element: Windows and doorsare so-called dimensionally stable building elements –which is important when selecting a coating. In thesecases, thick-layer translucent coatings or finishing paintsmust be used: These coatings prevent the ingress ofmoisture so that the element does not change its dimen-sions through swelling and shrinking which would makeit impossible to close or open them properly. With build-ing elements that are not dimensionally stable, e.g.boarding and fences, the ingress of moisture, e.g.through end grain wood or through cracks, can never beentirely prevented. In these cases, thin-layer translucentcoatings are used so that the wood can breathe and themoisture can leave the wood again.

Algae

Especially in areas where there are forests or a lot of trees,these lower organisms easily grow on wood in outdoorareas, covering the wood with an unsightly green growth.HK Stain contains an algacide which prevents prematuregreen growth. HK Stain and Wood Cream are both formu-lated with an algacide for protection.

Soft rot

Soft rot is the most dangerous form of fungi that decaywood because it destroys the structure of the wood,causing a loss of stability and the wood begins to rot.

8

Moisture Blue stain Soft rot Mould & algae UV-rays Gnawing wasps

6-XProtection

for wood outdoors

9

Size of containersArea that can be coated

once

0.75 l approx. 9 m2

2.5 l approx. 31 m2

5.0 l approx. 62 m2

6-XProtection

for wood outdoors

HK STAIN Breathing active and moisture regulating Subsequent coating can be applied without sandingor stripping

Does not flake; penetrates deeply Water repelling For use outdoors Solvent based Translucent / silk matt Built-in primer

Premium translucent coating with a wood preservative with 6 x protection

10

Tips & Important Information:

The additional use of a wood preservative primer is, of course, not ne -cessary when you use HK Stain. HK Stain is a “2 in 1 product and is al-ready formulated with the most comprehensive protection possible. Toachieve great silk gloss surfaces, we recommend an additional coat ofLong Time Stain UV. With an additional topcoat of Long Time Stain UV“clear UV+”, light shades of colour will remain permanently light.

Range of Use

For treatment of wood without static loads in outdoorareas without ground contact

Carports Roof eaves Framework Facade facing Garden pavilions Wood houses Arbours Palisades Pergolas Fences

Application rate: According to RAL Quality and Testing Provisions: 200 –250 ml/m2

11

Colours

silver grey white* hemlock*

rustic oak light oak nutwood

ebony teak fir green

pine palisander stone pine/larch

mahogany chestnut salt geen

clear* Special colours avail-

able upon request.

Notes on working:

The substrate must be clean and dry and can be recoated withoutsanding or stripping.

Set up a trial area first to check the colour on the respective wood sub-strate. This ensures the success of the coating!

Use wood preservatives safely and responsibly. Always read the labeland product information before using.

* Not suitable for building elements directly exposed to weather

12

Moisture Blue stain Soft rot Mould & algae UV-rays Gnawing wasps

6-XProtection

for wood outdoors

13

WOOD CREAM6 x protection with just one coat

Comprehensive wood preservation with just one coat Penetrates deeply and does not drip For use outdoors Solvent based Translucent / silk matt Built-in primer


once

0.75 l approx. 4 m2

2.5 l approx. 13 m2

5.0 l approx. 25 m2

Often only one coat is required!

6-XProtection

for wood outdoors

14

1. Just apply once… 3. …and finished!2. …self-active

allow to flow…


Wood Cream already contains an impregnation agent against blue stain& soft rot. This product is a true cream and not a translucent coating in gelform. It penetrates deeply and can be applied to rough-sawn wood in justone working operation. Two coats may be required for planed wood andhardwood. Wood Cream should be applied with a normal brush suitablefor translucent coatings.

Range of Use

For the protection of wood without static loads and with-out ground contact in outdoor areas against blue stain &soft rot. Clear: as a premium wood preservative impreg-nation & system primer for UV Weather Protection Stainand Long Time Stain UV.

Carports Roof eaves Framework Facade facing Garden pavilions Wood houses Arbours Palisades Pergolas Fences

Application rate: According to RAL Quality and Testing Provisions: 200 –250 ml/m2

15

silver grey white* light oak

pinenutwood teak

mahogany

clear*/**

* Not suitable for building elements exposed directly to weather

** As a premium wood preservative primer

Colours

Special ease of application

Because of its cream form, Wood Cream can be appliedin much thicker layers than conventional, thin-liquid,translucent coatings that contain a preservative. While upto three coats must be applied when using many othertranslucent coatings, complete wood and weather pro-tection can usually be achieved with just one coat ofWood Cream!

Notes on working:

Because of the consistency of the product, it is ideal for working over-head. No more time consuming covering and masking.

Use wood preservatives safely and responsibly! Always read the labeland product information before using.

palisander stone pine/larch

16

The only wood preservative impregnation that

can be

worked overhead

without any problem!

18

UV+for wood outdoors

Clear

19

UV WEATHERPROTECTION STAIN

Water based, medium solid, translucent coating


once

0.75 l approx. 7.5 m2

2.5 l approx. 25 m2

5.0 l approx. 50 m2

For all wood building elements, e.g. facades, windows &doors

Extreme UV protection: extremely durable For permanently light-coloured wood: Apply a topcoat of clear UV+

Clear UV+ for wood outdoors For use indoors and outdoors Water based Silk gloss Drip inhibited


Clear

20

Range of Use

Exterior doors / house doors Carports Roof eaves Framework / sunrooms Facade facing Windows / window shutters Garden pavilions / furniture Wood houses / arbours Fences / pergolas

Application rate: Wood shades: 2 x100 ml/m2

Clear UV+: 3 x100 ml/m2

° Brilliant surface° Especially high UV protection

° Renovation intervalsno longer depend onthe shade of colour

° Brilliant surface with aclear “wearing layer”

° The shade of thecoating darkens muchmore slowly

° Can be recoated with“clear UV+“

° Natural looking ° Original shade of wood is preserved

° Especially effective protection against blue stain; protection against fungi that stain wood with Wood Cream clear

Impregnation

Wood Cream“clear”

Impregnation


Impregnation


1st coat

UV Weather ProtectionStain “clear”

1st coat


1st coat

UV Weather ProtectionStain “clear UV+”

2nd coat


2nd coat


2nd coat

UV Weather ProtectionStain “clear UV+“

–3rd coat


3rd coat


Brilliant translucent surface

Light-colouredtranslucent surface

Clear UV+ for outdoors

Tips & Important Informaiton:

When used in a system with Wood Cream (clear), it can also be used inareas directly exposed to weather. For permanently light-colouredwood, UV Weather Protection Stain (clear UV+) can also be used as awearing layer which is renewed when renovating. The desired shade ofcolour then darkens much more slowly.

21

Much more than just a translucent coating

When combined with Wood Cream clear, UV WeatherProtection Stain achieved undreamt-of results in terms ofpermanent brilliance and protection of wood outdoors –and that now also for clear applications.

Notes on working:

Because of the consistency of the product it is very suitable for overhead work. No time consuming covering or masking work.

Special colours avail-

able upon request.

silver grey white light oak

nutwood teak pine

stone pine/larch mahogany nutwood

clear UV+

Colours

22


Clear

23


once

0.75 l approx. 9 m2

2.5 l approx. 31 m2

4.0 l approx. 50 m2

LONG TIME STAIN UVSolvent based, medium solid, translucent coating

For all wood building elements, e.g. facades, windows &doors

Extreme UV protection: extremely durable For permanently light-coloured wood: Apply a topcoat of clear UV+

Clear UV+ for wood outdoors For use indoors and outdoors Solvent based Translucent / silk gloss Drip inhibited UV+

for wood outdoors

Clear

24

Range of Use

Exterior doors / house doors Balcony railings Carports Roof eaves Framework / sunrooms Facade facing Windows / window shutters Garden pavilions / furniture Wood houses / arbours Fences / pergolas

Application rate: 1st coat: approx. 100 ml/m2

2nd coat: approx. 60 ml/m2


When used in a system with Wood Cream (clear), it is also suitable forareas directly exposed to weather. For permanent, light-coloured wood,Long Time Stain UV (clear UV+) can also be used as a wearing layer thatis renewed when renovating. The desired shade of colour darkens muchmore slowly.

° Especially high UVprotection thanks topigmentation

° Renovation intervalsno longer depend onthe shade of colour

° Especially high UVprotection thanks topigmentation

° Shade of colour dar-kens more slowly

° Recoat with “clearUV+“

° Natural looking ° Original wood colour ispreserved

Pre-treatment

HK Stain or Wood Cream“pigmented“

Pre-treatment

HK Stain or Wood Cream“pigmented“

Pre-treatment

Wood Cream“clear” required

1st coat

Long Time Stain UV“pigmented“

1st coat

Long Time Stain UV“pigmented“

1st coat

Long Time Stain UV„clear UV+“

–2nd coat

Long Time Stain UV„clear UV+“*

2nd coat

Long Time Stain UV„clear UV+“

Classic shades of colour

Classicshades of colourwith darkening

Clear UV+ for outdoors

* Also as a clear wearing layer directly on HK Stain and pigmented Wood Cream

25

Colours

silver grey white rustic oak

light oak nutwood ebony

teak fir green pine

palisander stone pine/larch clear UV+

Special colours available

upon request.

Notes on working:

Ideal for achieving especially high quality, silk gloss surfaces, also onsubstrates that were already coated with HK Stain.

Especially good results are then achieved with intermediate sandingbefore a finishing coat of Long Time Stain UV is applied.

26

Range of Use

Exterior doors / house doors Balcony railings Carports Roof eaves Framework Facade facing Windows / window shutters Garden furniture Wood houses Arbours Sunrooms Fences / pergolas

Application rate: Effective against blue stain and soft rot with 140 –160 ml/m2

clear

Colours

27


once

0.75 l approx. 11 m2

2.5 l approx. 36 m2

5.0 l approx. 71 m2

WOOD PRESERVATIVE PRIMERFor softwood

For e.g. spruce, fir & pine Penetrates deeply Long-term protection against blue stain & soft rot Adhesive primer for many coatings For use outdoors Solvent based

848 / 01.12 GB

Remmers (UK) Limited Crawley United KingdomTel.: +44(0) 845 373 0103Fax: +44(0) 845 373 0104 www.remmers.co.uk

Remmers India Pvt. Ltd.GurgaonTel.: +91 124 400 9131Fax: +91 124 400 9134www.remmers.in

Translucent Coatings with a Wood Preservative … 01.12...translucent coatings that contain a...

Documents

Transcript of Translucent Coatings with a Wood Preservative … 01.12...translucent coatings that contain a...