Hood, Christopher y Jakson, Michael. La Argumentacion Administrativa.compressed
Transforming the power of sun - Jakson Brochures/PV Modules Higher Range.pdfTransforming the power...
Transcript of Transforming the power of sun - Jakson Brochures/PV Modules Higher Range.pdfTransforming the power...
Transforming thepower of sunHighly Efficient Solar PV Modules(Range 250Wp-325Wp)
Key Features
Jakson manufactures highly reliable & highly efficient solar PV modules based on crystalline silicon technology ranging from 250Wp-325Wp in power output for use in on-grid & off-grid solar power plants, commercial rooftop and land based solar power projects. These modules are manufactured using automated production lines procured from Europe and installed at our manufacturing plant in Greater Noida, India. Jakson solar modules are sealed, weatherproof and highly durable with the ability to withstand high levels of ultraviolet radiations & moisture. Our modules are PID compliant and suitable for varied applications.
Outstanding DurabilityWith its new reinforced frame design, Jakson PV modules can endure a front load of up to 5400 Pa, and a rear load of up to 2400 Pa. (Frame thickness 42 mm for 72 cell series) Our PV modules are resistant to salt mist, ammonia and sand dust.
High Power OutputOur PV modules are compact in size and have been designed to deliver enhanced output and efficient even in limited space.
0~5%
Positive PowerTolerance
Positive Power ToleranceOur Solar PV Modules have positive tolerance of 0~5%. It will generate at least as much power as being shown on technical data sheet, or in favourable conditions-even more.
14001:2004 TUVRheinland
®
CERTIFIED
:2001 8009 O
SI
MNREGovt. of India
APPROVED
0~5%
Positive PowerTolerance
OHSAS18001
25YEARS
WARRANTY
Land based solar power projects
On-Grid & Off-GridRooftop Plants
Solar Pumping Systems
Application Areas
Enhanced Performance WarrantyJakson PV modules offer enhanced performance warranty. Our PV modules provide more than 80% efficiency even after 25 years of operation.
Aesthetic DesignOur PV modules have been designed keeping design aesthetics in mind. There are no electrodes on the top that makes the product look aesthetically pleasing.
Better Performance in High TemperatureJakson PV modules deliver efficient performance even in high temperature conditions due to its improved temperature coefficient.
Highly Efficient Solar PV Modules(Range 250Wp-325Wp)
JAKSON ENGINEERS LTD.A-43, Phase-II Extn., Hosiery Complex, Noida-201305, U.P., India | Tel.: +91-120-4302600, 4526100Toll Free No. : 1800 103 2600 | [email protected] | www.jakson.com
I-V Curve Variation with IrradianceOCells temp. = 25 C
2Incident Irrad. = 1000 W/m
2Incident Irrad. = 800 W/m
2Incident Irrad. = 600 W/m
2Incident Irrad. = 400 W/m
2Incident Irrad. = 200 W/m
Voltage [V]0 10 20 30 40 50
0
2
4
6
8
10
Cu
rre
nt
[A]
Voltage [V]
I-V Curve Variation with Temperature
0 10 20 30 40 500
2
4
6
8
10
Cur
rent
[A]
2Incident Irrad. = 1000 W/mOCells temp. = 10 COCells temp. = 25 COCells temp. = 40 COCells temp. = 55 COCells temp. = 70 C
** Refer to Jakson’s warranty document for terms & conditions
* The specifications are for reference purpose only. Jakson reserves the right to change the specification without prior notice.
Product specifications are subject to change without notice.©JAKSON ENGINEERS LTD. All rights reserved.
Electrical Properties (STC) 250 300 325
Model JP250W24V JP300W24V JP325W24V
No. of Cells 72 72 72
Maximum Power (Pmax) 250Wp 300Wp 325Wp
MPP Voltage (Vmpp) (V) 35.9 36.6 38.4
MPP Current (Impp) (A) 6.97 8.2 8.47
Open Circuit Voltage (Voc)(V) 44.5 44.8 46.3
Short Circuit Current (Isc) (A) 7.45 8.6 8.97
Mechanical Properties 250-325Wp
Front Load 5400Pa / 113 psf
Rear Load 2400Pa/50psf
Connector Type MC4 Compatible
Junction Box IP67 with 3 Bypass Diodes
Cables 1000mm x 2 ea / 39.37in x 2 ea
Glass High Transmission Tempered Glass (ARC)
Frame Anodized Aluminium
Cell Type Polycrystalline
Temperature CharacteristicsONOCT [ C] 47±2
OPmax [%/ C] -0.43OVoc [%/ C] -0.32OIsc [%/ C] 0.04
Certifications and Warranty
Certifications Standard IEC61215, IEC61730-1&2, IEC 62804, IEC61701
Fire Rating ISO 9001, 14001 & 18001
Performance Warranty 25 Years
Output Warranty of Pmax Linear Warranty**
Weight (in Kg. Approx) & Dimensions ( in mm Approx)
Model Dimension Weight
JP250W24V 1640X990X35/36 18.3
JP300W24V 1960X990X40/42 22
JP325W24V 1960X990X40/42 22100%
97%90%
80%
0%5 10 15 20 25
Added Value From Warranty
Typical Design Specifications 48
010
00
1960
948
99040/42
Rear ViewSide View
8-Oblong Mounting Slots
Junction Box
480
(+)PositiveNegative(-)
1000
2 Grounding Slots