Training_material_GSM_Frequency_Optimization_OPT_3.1_CD2_v2
-
Upload
chinguetas82600 -
Category
Documents
-
view
31 -
download
1
description
Transcript of Training_material_GSM_Frequency_Optimization_OPT_3.1_CD2_v2
-
1 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
NetAct Optimizer 3.1 CD2 for GSM
GSM Frequency Optimization
-
2 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
Nokia Siemens Networks Academy
Legal notice
Intellectual Property Rights
All copyrights and intellectual property rights for Nokia Siemens Networks training documentation, product documentation and slide presentation material, all of which are forthwith known as Nokia Siemens Networks training material, are the exclusive property of Nokia Siemens Networks. Nokia Siemens Networks owns the rights to copying, modification, translation, adaptation or derivatives including any improvements or developments. Nokia Siemens Networks has the sole right to copy, distribute, amend, modify, develop, license, sublicense, sell, transfer and assign the Nokia Siemens Networks training material. Individuals can use the Nokia Siemens Networks training material for their own personal self-development only, those same individuals cannot subsequently pass on that same Intellectual Property to others without the prior written agreement of Nokia Siemens Networks. The Nokia Siemens Networks training material cannot be used outside of an agreed Nokia Siemens Networks training session for development of groups without the prior written agreement of Nokia Siemens Networks.
-
3 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
At the end of this module the trainee should be able to:
Plan new frequencies for added TRXs
Outline the steps of the measurement based frequency
planning process
Assign and modify frequency groups, forbidden channels,
set manual separations and separation violation penalties
Perform frequency and Base Station Identity Code (BSIC)
allocation for non-hopping, baseband hopping, and
synthesized (RF) hopping networks
Compare different allocations, save and verify the results
Module Objectives
-
4 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
Select the scope
Add frequencies to new TRXs
Check that you have measurements needed for frequency optimization
Import forbidden channels
Start the Frequency Optimization tool
Create frequency groups
Set violation penalties
Assign frequency groups to BTSs
Set manual separations
Define forbidden channels
Set hopping mode
Define allocation targets and start allocation
Check the results
Save and provision the frequency plan
Steps in Frequency optimization
-
5 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
Interference Analysis
Before starting the Frequency optimization it is useful to find the worst interferers that cause problems over a long distance.
These problem cells should be treated first and new measurements run.
-
6 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
Select the scope
Add frequencies to new TRXs
Check that you have measurements needed for frequency optimization
Import forbidden channels
Start the Frequency Optimization tool
Create frequency groups
Set violation penalties
Assign frequency groups to BTSs
Set manual separations
Define forbidden channels
Set hopping mode
Define allocation targets and start allocation
Check the results
Save and provision the frequency plan
Steps in Frequency optimization
-
7 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
Add frequencies to new TRXs Optimizer can generate frequencies for new TRXs in BTSs
No plan is needed (close plan before starting)
Select BTSs, cells or sites on the Navigator, Map or Browser and use menu Tools->Frequency Optimization-
-
8 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
New Frequency: General Settings
New TRXs can be added to TCH or underlayer
Only non-hopping or BB- hopping TRXs
Frequency selection can be based on
optimization cost function
Interference
Assign Default Frequencies if frequency groups are not available or applicable
Select Interference type and separation violation penalties in the Interference tab
-
9 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
New Frequency: Interference Settings
Select Interference type
Violation penalties are explained later in this module
-
10 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
New Frequency: Select Target BTSs
In case of Master and Slave BTSs the user has to select the targets
-
11 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
New Frequency: Select Target BTSs
-
12 Nokia Siemens Networks Presentation /PLe /06.07.2012
For public use IPR applies
New Frequency Results
To view and modify the results later select
Tools->Frequency Optimization->Cell Frequency Manager...
The results disappear after the new TRXs become actual