Training Catalogue 2010 - MAWEA · Master Exercise Importing the Part ... CATIA Tooling Design...

Contents

2015

30D, Jalan PJS 1/46, Petaling Utama, Petaling

Jaya, 46000 Selangor Darul Ehsan

Tel: +603-7783 3459 | Fax: +603-7781 6818

Email : [email protected]

Website : www.mawea.com.my

Mechanical@CATIA

----------------------------------------------------------------------------------------------------------------------------------- Please do not hesitate to call MAWEA at 03-7783 3459 for further info or FAX to 03-77816818 for registration. MAWEA INDUSTRIES SDN. BHD. (356204-A)

30D, Jalan PJS 1/46, Petaling Utama, 46000 Petaling Jaya, Selangor, Malaysia.

Tel: +603 - 7783 3459 Fax: +603 - 7781 6818 Email: [email protected]

www.mawea.com.my

Contents

Course Subject Code

Duration (day)

2.1.3 Mechanical@CATIA

3D Functional Tolerancing & Annotation CAT-B01 2

Functional Molded Part CAT-B02 2

Core & Cavity CAT-B03 1

Mold & Tooling Design CAT-B04 2

Generative Sheetmetal Design CAT-B05 1

Surface Repair CAT-B06 2

Tooling Design CAT-B07 2

Composites Part Engineering CAT-B08 3

Composites Part Manufacturing CAT-B09 2

Composite Grid Design CAT-B10 2

Jigs & Fixture Design CAT-B11 3

mailto:Mechanical@CATIA




www.mawea.com.my

CATIA V5 TRAINING – 3D FUNCTIONAL TOLERANCING AND ANNOTATION

Venue : MAWEA TRAINING CENTRE (Petaling Jaya, Selangor)

Date : TBC

Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.)

-----------------------------------------------------------------------------------------------------------------------------------

Introduction

This course will teach you how to annotate a 3D part. You will learn how to create annotation planes and how to add and manage 3D annotations on these planes. You will also learn how to create 3D views and use them to create 2D drawing

views.

Objective

Upon Completion of this course you will be able to:

Add 3D annotations to a part

Manage and position these annotations

Create and manage annotation planes and views

Manage the 3D geometry associated to the 3D annotations

Contents

Introduction to FT&A

The Tolerancing Advisor

Creating & Managing FTA Annotations

Geometry for 3D Annotations

Advanced Functions

The User Settings




www.mawea.com.my

CATIA V5: FUNCTIONAL MOLDED PART FUNDAMENTAL


Date : TBC


-----------------------------------------------------------------------------------------------------------------------------------

Introduction

This course will teach you how to use the Functional Molded Part workbench to create molded parts from the main shapes definition and to finalize the part with additional dress up features. You will also be taught the multi-body approach and will finally learn how to extract cores and cavity from the final part.

Objective

Upon Completion of this course you will be able to:

Define the main shapes of a molded part as added or removed material

Add functional features such as ribs or cutouts to the part

Finalize the molded part using the feature modifiers such as fillets or patterns

Use the multi-body approach

Extract cores and cavities from the final part

Contents

Introduction to Mold Design

Shape Features

Mold Design properties

Functional Features

Feature Modifiers

Dress up Features

Functional Extration

Design Process




www.mawea.com.my

2nd

day

Creating a Parting Line

Creating a Parting Surface

Functionalities Dedicated to Stamping

Comparing Two Parts

CATIA V5 CORE & CAVITY DESIGN


Date : TBC


----------------------------------------------------------------------------------------------------------------------------------- Introduction In this course, you will you will discover CATIA V5 Core & Cavity Design user interface and you will review the general process to create the parting surfaces required for the design of a mold. The scope of Core & Cavity Design workbench is to provide the mold designer with all the necessary functions to create the surfaces (Core, Cavity, Moving elements) required to create his mold tool. Objective

- Import the part to a mold

- Define the main pulling direction

- Update mold areas by transferring, splitting and segregating faces

- Create a parting surface

- Use functionalities dedicated to stamping

- Perform a geometric comparison of two parts

Contents

1st day

Introduction to Core and Cavity Design

Master Exercise

Importing the Part to Mold

Defining the Main Pulling Direction

Defining a Slider/Lifter Direction




www.mawea.com.my

CATIA V5 TRAINING – MOLD TOOLING DESIGN


Date : TBC

Duration/Time : 1Day (9.00 a.m. to 5.00 p.m.)

-----------------------------------------------------------------------------------------------------------------------------------

Introduction

This course will teach you how to design an injection mold and its components using standard and user defined catalogs.

You will learn the design process with the help of industrial examples.

Objectives

Upon completion of this course you will be able to:

Create a mold base using guided and fixed components

Build a Plastic Injection Mold assembly from scratch

Contents

Introduction to Mold Tooling Design Creating a New Mold Editing the Mold Base Working with Mold Components Mold Design to Manufacturing Creating Injection Features Additional Information




www.mawea.com.my

CATIA V5 TRAINING – GENERATIVE SHEETMETAL DESIGN


Date : TBC


----------------------------------------------------------------------------------------------------------------------------------- Introduction In this course you will be exposing the concept of sheet metal design such as the bend allowance, the K-factor and the bend radius rule. You also will learn the implementation of sheet metal by using CATIA Sheet Metal where you will learn all the features involve in creating your fabricated parts. Objective

Understand the terminology and the creation process for sheet metal part design

Define and manage sheet metal part parameters

Design walls, bends and flanges

Add features such as cutouts, holes, corners and chamfers

Create standard and user defined stamped features

Manage folded and unfolded views and export a finished flat pattern

Contents

Getting Started

Introduction to Sheet Metal Design

Generative Sheet Metal Design Overview

Defining Sheet Metal Parameters

Recommendations for Getting Started

Sheet Metal Features

Cutouts

Holes

Corners and Chamfers

Standard Stamps

User-Defined Stamps

Recommendations for Sheet Metal Features

Sheet Metal Walls

What is a Sheet Metal Wall?

Defining the First Wall

Secondary Walls

Part Recognition

Recommendations for Sheet Metal Walls

Transformations and Duplication

Transformation of Parts

Patterns

Mirror

PowerCopies

Recommendations for Duplication

Bends and Unfolded Mode

Bends

Unfolded Mode

Corner Relief

Recommendations for Bends

Mapping and Output

Point or Curve Mapping

Output

Flanges

Creating Flanges

Recommendations for Flanges

Advanced Topics in Sheet Metal

Sheet Metal Standard Files

Multi-Body Methodology




www.mawea.com.my

CATIA V5 TRAINING – SURFACE REPAIR


Date : TBC

Duration/Time : 1 Day (9.00 a.m. to 5.00 p.m.)

----------------------------------------------------------------------------------------------------------------------------------- Introduction Surface Repairing provides users a fixing tools to heal parts to be used in downstream applications such as manufacturing, analysis or tooling design. This product enable to helps user checking validity of imported data (surfaces or solids) with regard to V5 modeling criteria, and subsequently correcting or improving the topology and the geometry. Objective

Do Surface Analysis and Repair the imported data

Perform advanced surfaces analysis and gap correction

Join the imported data

Solidify the closed surface

Understand the mechanism of a multi-model environment including the use of surfaces

Contents

Introduction to surface repairing

Quality checking and correction techniques

Surface manipulation and operation

Surface healing and merging

Model Analysis

Closing Join Surface

Master Exercise




www.mawea.com.my

CATIA V5 TRAINING – TOOLING DESIGN

Venue : MAWEA TRAINING CENTRE

Date : TBC

Duration/Time : 2 Days (9.00 a.m. to 5.00 p.m.) ----------------------------------------------------------------------------------------------------------------------------------- Introduction CATIA Tooling Design teaches you how to create the die and mold components using Mold Tool Design workbench. You will learn how to instantiate the components in a die or mold structure. Contents Introduction to Tooling Design

- Accessing the Workbenceh - Tooling Design Functions - Tooling Design Catalogs - Specific Tooling Design Settings

Creating Components

- Selecting a Component - Instantiating a Component - Creating a Component using a Knowledgeware Rule

Editing Components

- Editing the Definition of a Component - Splitting a Component - Deleting a Component - Activating / Deactivating a Component - Isolating an Existing Component - Replace an Existing Component

Specific Components : Inserts & Sliders

- Defining & Positioning Insert and Slider - Defining & Positioning Retainers and Angle Pin - Instantiating Screws in the Retainers

Advanced Add / Remove Capabilities

- Assembly Drillings - Extended Definitions

Managing User Components

- Structure of a User Component - Creating a Catalog of User Components - Instantiating a User Component

Tool Design to Manufacturing

- Tooling Component Drilling - Technological Results vs. Explode Holes




www.mawea.com.my

CATIA V5 TRAINING – COMPOSITES PART ENGINEERING


Date : TBC


----------------------------------------------------------------------------------------------------------------------------------- Introduction This course will teach you how to build composite parts in the context of the engineering design process, from Preliminary Design to Engineering Detail Design. Objective

Define the Composites parameters.

Create a preliminary design for composites parts using the Zone approach and the Solid approach.

Generate Composites parts from Preliminary design to Engineering detail design. Contents

CPE Workbench Presentation

Preliminary Design 1 (Composite catalog, laminate parameters, zone

based design, zones parameters, transition Zones, etc.)

Preliminary Design 2 (Connection Generator, Imposed Thickness

Point, ITP height, Import laminate etc.)

Engineering Detail Design 1 (Stack-up and plies creation from zones, slicing

group, limit contour etc.)

Engineering Detail Design 2 (Plies group, manual plies creation, core, ply

exploder, 3D section etc.)

Engineering Detail Design 3 (Numerical analysis, core sample, symmetry

creation, ply table and import etc)

Engineering Detail Design 4 (Edge of part, solid from plies, 3D Multisplice

creation, butt splice-no splice, inspection tools, darts etc.)

Engineering Detail Design 5 (Mirrored part, drawing, 3D annotations, ply

export, ply-book, V4-V5 Composites Interoperability)

DMU Composites Review




www.mawea.com.my

CATIA V5 TRAINING – COMPOSITES PART MANUFACTURING


Date : TBC


----------------------------------------------------------------------------------------------------------------------------------- Introduction This course will teach you how to build composite parts for manufacturing detail design. Objectives Upon completion of this course you will be able to:

Understand the significance of the Manufacturing

Data creation process in Composites design

Generate the Manufacturing data structure from the Engineering data structure

Modify the Manufacturing data structure

Synchronize the link between the Manufacturing and the Engineering part Contents

- CPM Workbench Presentation - Composites Catalog - Laminate Parameters - Manufacturing Data Structure - Manufacturing Surface Swapping - Plies Group - Manual Plies Creation - Core - Edge Of Part - Material Excess - Multi Splice Creation - Ply Table - Numerical Analysis - Managing the Parts - Productbility Analysis - Inspection Tool - Darts - Flattening - Geometry transfer - Ply Exploder - Synchronization - Export - Ply Book - Miscellaneous




www.mawea.com.my

CATIA V5 TRAINING – COMPOSITE GRID DESIGN


Date : TBC


----------------------------------------------------------------------------------------------------------------------------------- Introduction This course will introduce you to the Grid approach. You will generate plies, modify geometry, and create a solid or a top surface using the ply geometry. By the end of this course you will be able to create and modify a composite part using the Composites Grid Design approach. Objectives Upon completion of this course you will be able to:

Understand the concept of grid approach in Composites Design

Generate plies using the Grid approach

Modify the ply geometry

Create a solid or a top surface using the ply geometry

Create and modify a composite part using the Composites Grid Design approach Contents

Introduction to Composites Grid Design Plies Creation using the Composites Grid Approach Modifying the Ply Geometry Solid Creation from Ply Geometry




www.mawea.com.my

CATIA V5 TRAINING – JIG AND FIXTURE DESIGN


Date : TBC


----------------------------------------------------------------------------------------------------------------------------------- Introduction CATIA V5 Jig & Fixture Design is a course compiled specifically for the Jig & Fixture application. Throughout the course you will learn on how to create jig and fixture components, how to assemble the components, clearance checking and drawing creation. You will also learn on how to create knowledge templates for your repetitive tasks. Objective

Able to design, assemble and generate drawing for Jig & Fixture application.

Able to create some templates for repeat task.

Contents

Introduction to Jig & Fixture

Fixture Design. 3D part fixture modeling Fixture Assembly Clearance Checking & Editing Fixture Drawing

Jig Design 3D part jig modeling Jig Assembly Clearance Checking & Editing Jig Drawing

Introduction to Knowledgeware Parameters Formula Design Table Power Copy & User Defined Feature

Training Catalogue 2010 - MAWEA · Master Exercise Importing the Part ... CATIA Tooling Design...

Documents

Transcript of Training Catalogue 2010 - MAWEA · Master Exercise Importing the Part ... CATIA Tooling Design...