Training Calendar 2018 Exclusive Electronic Laboratory to provide training on Cummins Power-Gen...

Cummins Technical Training Calendar 2018

2

Dear Customer,

Thank you for choosing Cummins for your business requirements. We value your patronage. We have a

commitment towards all our customers’ and are keen to equip you with the latest technical upgrades and offer

hands-on training about the technological advancements of Cummins products, thus enabling you to raise the

efficiency of the Cummins equipment you own.

Since its relocation to Cummins Mega Site, located at Phaltan in the year 2016, 3000 plus engineers, technicians

and customers have been trained at the new facility named as Cummins Technical Training Centre. The facility

offers training for the entire range of Cummins Engines from 1.3 liter to 50 liter including alternator and controls.

The facility is spread over 3000 square meters, is equipped with the state of the art equipment and live engine

models offering the following features.

• Live Engines for a hands-on learning experience on diagnostics and troubleshooting competencies

• Exclusive Electronic Laboratory to provide training on Cummins Power-Gen Controls of DG sets.

• Filtration Knowledge Centre and Valvoline Lube Station with interactive consoles to enhance capability

on importance of engine systems.

• Immersion rooms for BHARAT STAGE IV emission compliant electronic engines with Selective Catalytic

Reduction and Exhaust Gas Recirculation system.

• On display are cut-away section of key components of the Selective Catalytic Reduction and, the New

Cummins Fuel Pump and Injector.

With upgraded training techniques, and adapting to emergent technologies, Cummins Technical Training Centre

is equipped to cater to customers from diverse business segments, offering a hands- on exposure to LIVE

ENGINES and interactive work stations, and connected components. The live modules of BHARAT STAGE IV

engines with vehicle simulation give the learner an unmatched learning experience and boundless confidence.

The facility has incorporated a Model Component Care Centre that facilitates inspection and testing of vital

components namely, Turbocharger, Fuel system and Emission Components, equipping the user superior skill sets

on diagnostics.

We at Cummins are committed to give our customers optimum return on their investment in the Cummins products

and services.

Please nominate your candidates for a 21st Century Learning experience.

Truly,

S Ramesh Babu.

Head Customer Support (All India)

3

Course Code : EXCE

Cummins Diesel Engine Awareness —

Construction Applications

Course material fees: ₹ 28,320.00

(₹ 24,000.00 Fee + ₹ 4,320.00 GST*)

This training course is designed for executives of end

users owning construction applications other than

Genset, Powered by Cummins engines. The Course

Covers aspects of engine systems familiarization,

Cummins parts systems and Service support

systems.

Course Code: EMCE

Cummins Diesel Engine Maintenance —

Construction Applications

Course Material fees: ₹ 28320.00

(₹ 24,000.00 Fee + 4,320.00 GST*)

This training course is designed for service staff

involved in operation, maintenance and repair of

Cummins engines powering construction and

Industrial applications. At the conclusion of this

course, the participant would be familiar with engine

models, applications, the engine principle of working,

engine system and flows, maintenance and

troubleshooting aspects.

Course Code : EMGE

Cummins Diesel Engine Maintenance -

Genset Applications

Course Material fees: ₹ 28320.00

(₹ 24,000.00 Fee + 4,320.00 GST*)

This training course is designed for service staff

involved in operation, maintenance and repair of

Cummins engines powering generating sets. At the

conclusion of this course, the student would be

familiar with Cummins Gen-Drive engines, operation,

maintenance, troubleshooting, proper installation,

theory and operation of hydraulic governor, EFC,

ECPG and Alternators.

Valvoline Lube Station

BSIV Immersion Room & Components Care Centre

4

Course Code : EXGE

Cummins Diesel Engine Awareness -

Genset Application


(₹ 24,000.00 Fee + ₹ 4,320.00 GST*)

This training course is designed for executives of end

users owning generator sets Powered by Cummins

engines. The Course Covers aspects of engine

systems familiarization, Alternator, and Service

support systems.

Course Code : KRE

Cummins Diesel Engine Rebuild— KT / KTA 1150 /

KTA 19 Series


(₹ 36,000.00 Fee + ₹ 6,480.00 GST*)

This course is designed for users involved in

Cummins KT/KTA1150 / KTA 19 Series engine

rebuilding and rework of engine components. At the

conclusion of the course, the participant would be

familiar with assembly and disassembly of KT/

KTA1150 / KTA 19 Series engine according to rebuild

standard with the recommended service tools.

Who can attend? The participant should have

undergone engine maintenance course — EMCE /

EMGE

Course Code : NVRE

Cummins Diesel Engine Rebuild— N and V Series


(₹ 36,000.00 Fee + ₹ 6,480.00 GST*)

This course is designed for users involved in

Cummins N & V Series engine rebuilding and rework

of engine components. At the conclusion of the

course, the participant would be familiar with as-

sembly and disassembly of N & V Series engine ac-

cording to rebuild standard with the recommended

service tools.

Who can attend? The participant should have

undergone engine maintenance course — EMCE /

EMGE

Course Code : A & EC

Alternator & Electronic Controls for generator sets


(₹ 24,000.00 Fee + ₹ 4,320.00 GST*)

This training course is designed for users involved on

Genset engines. The controls involved are Powercom

and different types of Power Command Controls

based on KVA rating with related software such as

C-View and Inpower used for calibration, engine and

alternator adjustments, data monitor and logging. Also

the hands on training on the Powercom training station

and PCC simulator will be made available.

Who can attend? The participant must be well

conversant in basics of electrical, electronics,

Alternator and computer MS office.

Fleetguard Filtration Knowledge Center

Hands on training

5

Eligibility and Enrollment Procedure

1.Eligibility: Candidates should be sponsored by

actual users of Cummins engines, employees of the

sponsoring organization only will be eligible.

2.Criteria: Enrollment forms duly signed and stamped

by the HR / Maintenance / Training department will be

considered for enrollment.

3. Enrollment Procedure: On completion of step 1

and 2. please submit the enrollment form along with

training fees to the Cummins Area Service Manager

(ASM) or Cummins Training & Quality Manager

(TQM) representing your area. Contact information

namely mobile number, email address of the

concerned officer of your Zone / Area is furnished

along side for easy reference.

Important: Please do not send enrollment form /

payment to Technical Training Center directly.

4. Payment Terms: Training fees MUST BE

submitted along with the PO & enrollment form.

Payment can be made vide Cheque / Draft. The

instrument should be drawn favoring “ Cummins India

Ltd” payable at Pune.

Payment will also be accepted vide electronic

transfer. You can request for NEFT document from

Cummins Area Service Manager (ASM) or Cummins

Training & Quality Manager (TQM) representing your

area.

Quotation can be issued for processing payment.

Final invoice will be generated on commencement of

training and will be handed over to the attending

candidate for onward submission to the company.

5. Seat Allocation : Allocation of seats will be done

on “ First Come First Serve Basis” . Number of seats

available for each training is 20. Please ensure that

your enrollment request is sent to the Cummins

Area Service Manager (ASM) or Cummins Training &

Quality Manager (TQM) at least 4 weeks prior to the

training date. Seats will be allocated to those

candidates whose payment has been received along

with the enrollment form / request.

In case of cancellation of training due to low

enrollment, candidates can be accommodated into a

subsequent training bearing the same course code.

Communication to this effect will be provided to you.

6. Training Address: Training will be conducted at

our Technical Training center at the following

address:

Cummins India Ltd—DBU

Technical Training Center

Plot no. A1 & A1/2

MIDC, Survadi,

Phaltan lonand Road,

Phaltan Taluk, Phaltan,

Satara Dist - 415 522. 7. Safety : Safety shoes are compulsory for every

one undergoing training at our training center.

Special Training at site or at Cummins

Training courses designed to suit every individual

customer’s requirements, can be arranged at

customer site or at our Training Center. Fee structure

will be different for special training Courses.

Course Material

The required training material and literature will be

provided to each candidate.

Few Instruction to note & follow

♦ All participants shall come with safety shoes, which is mandatory. Candidates attending training without safety shoes will not be taken for shop floor.

♦ Timing—9:00 am to 4:00 pm. Attendance is mandatory for all days.

♦ The medium of instruction is represented by the last alphabet in the course code e.g. EMGE.

Where ‘E’ is English

♦ Technical Training Center is non-residential. candidates have to arrange for their own accommodation. Near by

hotel address details provided on page no.9.

♦ We do not provide local conveyance.

6

Sr.no Region Name e-mail id Location

1 India Lava kumar Sharma [email protected] Area service Manager, Singrauli

2 India K K Upadhyay [email protected] Area service Manager, Pune

3 India Ramesh Achary [email protected] Area service Manager, Nagpur

4 India Shailendra Singh [email protected] Area service Manager, Jaipur

5 India P K Prajapati [email protected] Area service Manager, Ahmedabad

6 India Anoop K Upadhyay [email protected] Area service Manager, Gurgaon

7 India Virender Singh Rana [email protected] Area service Manager, Chandigarh

8 India Sambhaji Chougale [email protected] Area service Manager, Raipur

9 India Sandeep Awasthi [email protected] Area service Manager, Noida

10 India Jayaraman G Balaraman [email protected] Area service Manager, Coimbatore

11 India Loganathan S [email protected] Area service Manager, Hyderabad

12 India P.P.Tangri [email protected] Area service Manager, Bangalore

13 India Priya Radhakrishnan [email protected] Area service Manager, Chennai

14 India Bipul Brahma [email protected] Area service Manager, Guwahati

15 India Kaushik Manna [email protected] Area service Manager, Kolkata

16 India Pritpal Singh [email protected] Area service Manager, Ranchi

17 India J Nagarajan [email protected] Area service Manager, Sambalpur

18 India Bhupendra K Awasthi [email protected] TQM, North

19 India Kamesh T [email protected] TQM, South

20 India Mahesh Sheelvant [email protected] TQM, West

21 India Dilip Golder [email protected] TQM, East

Course at a Glance - 2018

Month Course Code Course Date

March EMCE 12 - 16 Mar 2018

April

KRE 02 - 06 Apr 2018

EXGE/EMGE 09 - 13 Apr 2018

EXCE 16 - 20 Apr 2018

NVRE 23 - 27 Apr 2018

May A&EC 14 - 18 May 2018

EMCE 28 May - 01 Jun 2018

June EXGE/EMGE 18 - 22 Jun 2018

KRE 25 - 29 Jun 2018

July

NVRE 02 - 06 Jul 2018

EXCE 16 - 20 Jul 2018

A&EC 30 Jul - 03 Aug 2018

August EXCE 27 - 31 Aug 2018

September

EMCE 03 - 07 Sep 2018

EXGE/EMGE 10 - 14 Sep 2018

NVRE 17 - 21 Sep 2018

KRE 24 - 28 Sep 2018

October EXCE 29 Oct - 02 Nov 2018

November

EXGE/EMGE 12 - 16 Nov 2018

A&EC 19 - 23 Nov 2018

NVRE 26 - 30 Nov 2018

December EMCE 03 - 07 Dec 2018

KRE 17 - 21 Dec 2018

7

ENROLLMENT FORM 2018

TECHNICAL TRAINING CENTRE, PHALTAN

Name of the Applicant:_______________________________________________________________________________

Last Middle First

Designation:___________________________________________________Mob No._______________________________

Engine Model(s) available with the organization:___________________________________________________________

_____________________________________________________________________________________________________

Application(s) Equipment : _____________________________________________________________________________

Engine Serial No/s.:___________________________________________________________________________________

Course Requested:___________________________________

D.D. No.:________________Dtd.:_______________ of Bank:_________________________________________

For amount of Rs.:____________________________________________________________ enclosed.

Organisation’s Name and Address:_____________________________________________________________

City:_____________________ District:______________________________ State:________________________

Tel. No.:_____________________ Fax No.:__________________ Website:_____________________________

Email:______________________________________________________________________________________

Contact person/Sponsoring Authority’s Name:___________________________________________________

Last Middle First

Designation:_________________________________________________________________________________

Email:____________________________________________ Mobile No.:________________________________

Product of the company:_______________________________________________________________________

Signature:__________________________________ Company Seal:____________________________________

Date:________________________________ Place:_________________________________________________

Note: Please ensure all the above Information is correctly filled

Use photo copy of this form for enrollment information

Cummins India Ltd—DBU Technical Training Center Plot no. A1 & A1/2 MIDC, Survadi, Phaltan lonand Road, Phaltan Taluk, Phaltan, Satara Dist - 415 522. Contact No: +91 9822455064

8

Contact us for training requirements at:


Cummins India Ltd—DBU


Plot no. A1 & A1/2

MIDC, Survadi, Phaltan lonand Road,

Phaltan Taluk, Phaltan,

Satara Dist - 415 522.

Contact No: +91 9822455064

E-Mail: [email protected]

Web: www.cumminsindia.com

Zonal Office—East

Cummins India Limited— DBU

BIPL Building Delta, Fourth Floor (North Wing)

Bengal Intelligent Park,

Block EP & GP, Plot A2 & M2

Sector V, Bidhan Nagar, Kolkata-700 091.

Mob: 91 96743 95050

Phone: 033-23578065 / 23572481

Fax: 033-23573839

Email: [email protected]

Zonal Office—South

Cummins India Limited—DBU

Survey No,118, B Wing,

3rd Floor, Gayathri Lake Front,

Ring road, Hebbal,

Bengaluru 560 024, Karnataka.

Phone: 91 9448496783


Zonal Office—West


Cummins India office Campus,

Tower A, 3rd Floor,

Survey No. 21, Balewadi,

Pune, Maharastra – 411 045.

Fax: 020-67067013


Zonal Office—North


A Square, 3rd Floor

278, Udyog Vihar, PH-II

Gurgaon 112 016, Haryana

Mob: 91 88268 99890

Fax:011-2621 2817


9

Route I- Via PUNE SATARA ROAD – PUNE – SHIR- Route II—Via SASWAD – NIRA - LONAND

NOTE : Cummins Technical Training Centre ( CTTC) is 100 KM from Pune and 12 KM before Phaltan

Hotels in Phaltan

Sr.

No. Name Loca,on Contact Mobile no

Tariff

NON AC*

Tariff

AC* No. of Rooms

1 Hotel Maharaja Phaltan - Loanad Road, Jinty Naka 02166-224444 9881198811 1000 1400 18

2 Mudhudeep Lodge Near Bus Stand 02166-220796 600 900 11

3 Hotel Jeet Paradise Kolki, Shinganapur Road 02166-220835

9320020999

/

9867265986

700 900 24

4 Hotel Bhojraj Shivaji Chouk, Near Bus Stand 02166-222312 700 900 20

5 Hotel Aryaman Ring Road, 02166-221777 9226340523

6 Hotel Shiv Residen- Nana Pa9l Chowk, Near ST Bus 02166-221588 9422606388 650 1100 11

7 Hotel New Vijay

Lunch Home Gudshila Maidan, ST Bus Stand 02166-226746 7350026111 700 1200 12

8 Shriram Lodge Ambedkar Chowk, ST Bus Stand 02166-225156 8485017364 500 1000 6

9 Nisarg Pune - Pandharpur Road, Survadi, Tal

-Phalta, Dist - Satara, Pin - 415528

02166-262300/

262301/02 7350990666 900/1800

1100 /

2100 32

10 Jakson Inns

Plot no.398/6, 399, 400, Near Cum-

mins Mega Site, Phaltan Lonand

Road, Post Nimbhore, Tal-Phaltan,

Pin-415523, Maharastra

02166-262111 3200 /

3400 73

* Note : Please contact hotel directly for current tariff

Training Calendar 2018 Exclusive Electronic Laboratory to provide training on Cummins Power-Gen...

Documents

Transcript of Training Calendar 2018 Exclusive Electronic Laboratory to provide training on Cummins Power-Gen...