TRAINING BROCHURE 2013 - Dutch Marine Crewing | Offshore Crewing Services | Training...

17
TRAINING BROCHURE 2013 Creating and delivering high quality training to empower and significantly increase the skill and knowledge base of our….. Seafarers

Transcript of TRAINING BROCHURE 2013 - Dutch Marine Crewing | Offshore Crewing Services | Training...

TRAINING

BROCHURE

2013

Creating and delivering high quality

training to empower and significantly

increase the skill and knowledge base of

our…..

Seafarers

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

Table of Contents

MARITIME CREW RESOURCE MANAGEMENT COURSE.........................................................................................................2

THOME, HEALTH, SAFETY, SECURITY, ENVIRONMENTAL, AND QUALITY MANAGEMENT SYSTEM IN ACCORDANCE WITH

THE ISM CODE COURSE (HSSEQ)...........................................................................................................................................2

RIGHT SHIP COURSE..............................................................................................................................................................3

VESSEL INSPECTION QUESTIONNAIRE – INCIDENT AWARENESS TRAINING (VIQ) ................................................................3

AMOS MAINTENANCE & PURCHASE COURSE (“Windows – Based”) ....................................................................................4

CONSULTAS PLANNED MAINTENANCE SYSTEM COURSE .....................................................................................................4

TM-MASTER Version 1 or Version 2......................................................................................................................................5

BRIDGE WATCHKEEPING FOR CADETS..................................................................................................................................5

GALLEY AND STORES MANAGEMENT COURSE .....................................................................................................................6

MESSMAN COURSE...............................................................................................................................................................6

PORT STATE CONTROL ..........................................................................................................................................................7

ENCLOSED SPACE ENTRY & PORTABLE GAS MEASUREMENT EQUIPMENT ..........................................................................7

SHIPBOARD SECURITY AWARENESS SEMINAR......................................................................................................................8

BRIDGE TEAM MANAGEMENT ..............................................................................................................................................8

DRY CARGO HANDLING & STOWAGE....................................................................................................................................9

SHIP HANDLING FAMILIARIZATION.......................................................................................................................................9

P&I INSURANCE & CREW CLAIMS .......................................................................................................................................10

JOTUN PAINT COURSE.........................................................................................................................................................10

ABB TURBOCHARGER COURSE............................................................................................................................................11

CLASSIFICATION COURSE ....................................................................................................................................................11

BOILER WATER TREATMENT COURSE .................................................................................................................................12

COMMERCIAL OPERATIONS COURSE..................................................................................................................................12

OPERATION OF ELECTRICAL INSTALLATIONS COURSE (FSE) ...............................................................................................13

HULL STRUCTURE COURSE..................................................................................................................................................13

EXTREME COLD WEATHER PRECAUTION ............................................................................................................................14

INTRODUCTION TO OFFSHORE INDUSTRY AND PRACTICES................................................................................................14

REFMAN COURSE ................................................................................................................................................................15

RISK MANAGEMENT AND INCIDENT INVESTIGATION COURSE...........................................................................................15

COMING SOON / NEW COURSES……...................................................................................................................................16

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

MARITIME CREW RESOURCE

MANAGEMENT COURSE

COURSE PROFILE: This course provides training and guidance

for Management and Operational Level Deck and Engine

Officers where each participant shall gain relevant knowledge

on the importance of problem solving skills where they can be

involved in activities that will sharpen logic, reasoning, and

skills at defining problems; evaluating the reasons and factors

behind every human act, perception, and behaviour;

developing alternatives and building creativity, and selecting a

solution.

COURSE OBJECTIVE: To provide participants with

comprehensive guidance about hazards at work as well as

preventive measures towards accidents. This will help

participants the value of a “safe working environment” which

can be achieved through teamwork and excellent interpersonal

skills clearly manifested when one knows how to become a

good listener.

COURSE SYLLABUS: Discuss introduction to Human Factor,

cause behind accidents, shell model, assessment of accidents

on Thome vessels, our sensory system, team building,

communication, stress, and fatigue. It also includes operational

atmosphere, culture, rules/regulations/operating procedures

and situational awareness.

TRAINING METHOD: Involves lecture, power point presentation,

and Audio Visual Presentation and simple exercises.

ENTRY REQUIREMENTS: This course is designed for All

Management and Operational level Deck and Engine Officers.

COURSE MATERIALS: Handouts are given to each participant.

THOME, HEALTH, SAFETY, SECURITY,

ENVIRONMENTAL, AND QUALITY

MANAGEMENT SYSTEM IN

ACCORDANCE WITH THE ISM CODE

COURSE (HSSEQ)

COURSE PROFILE: This course provides training and guidance

for Quality Assurance Manuals in relation to the ISM Code

through lectures, visual presentation and case studies.

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge of the ISM Code, policies and safe

practices on board through implementation of the Quality

Assurance System, demonstrating the vital role ISM plays in the

safety aspects of the shipping industry.

COURSE SYLLABUS: Background of the ISM Code, Purpose of

the ISM Code, Requirements of the Code, Certification, Internal

and external audits, Implementation and Strategies. Senior

officers continue an extra day with Ocean Manager, DNV

Navigator and other systems familiarization

TRAINING METHOD: Involves lecture, power point presentation,

Audio Visual Presentation and Case Study Workshop.

COURSE MATERIALS: Handouts are given to each participant.

A CERTIFICATE OF COMPLETION is given to candidates

who have successfully completed the requirement of

the course.

ENTRY REQUIREMENTS: This course is designed for all

shipboard personnel.

Duration of the Course: 2 Days

Duration of the Course: 3 Days Senior/ 2 Days Junior

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

RIGHT SHIP COURSE

COURSE PROFILE: This course provides training and guidance to

all Deck and Engine Officers and Bosuns where each participant

shall gain relevant knowledge and be familiarized on the latest

edition of the Right Ship and other Dry Cargo Inspection

Questionnaires used by Inspectors onboard. The Training is 3

days in total and aims to provide participants with

comprehensive guidance to avoid possible vetting/inspection

deficiencies. We highlight the list of repeated observations and

targeted items, Conduct of Inspections, Permitted Inspection

actions, Inspection Suggestions and, Distribution of Reports.

COURSE OBJECTIVE: On completion of this training programme,

the participants should.

• Acquire knowledge on the latest edition of

questionnaires

• Avoid possible deficiency with regards to inspection.

• Comply with latest updates on Right ship / AMSA

• Discuss the list of repeated observations and

targeted items.

• Learned how to deal with vetting inspectors.

• Developed a broad understanding of Cargo Hold

preparation and Maintenance.

COURSE SYLLABUS: Bulk Questionnaire, Right Ship inspection,

Port State Control Inspection, CDI Ship(Dry Bulk), Cargo Hold

Washing, Good management onboard, Hold cleaning

procedure, Code of State practice (Bulk Cargo), Cargo

loading/Unloading-plan air draft, Cargo Bilges Condition Logs

and MG –Hatch Cover maintenance.

TRAINING METHOD: Involves lecture, power point

presentation and Audio Visual Presentation, simulation

exercises.

COURSE MATERIALS: Handouts will be given to each

participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for Deck and

Engine Offices and Bosun.

VESSEL INSPECTION QUESTIONNAIRE

– INCIDENT AWARENESS TRAINING

(VIQ)

COURSE PROFILE: This course provides training and guidance to

all Deck and Engine Officers where each participant shall gain

relevant knowledge and be familiarized on the latest edition of

questionnaires conducted by various inspectors it also includes

onboard incident awareness.

COURSE OBJECTIVE: To provide participants with

comprehensive guidance to avoid possible vetting deficiency

with regards to VIQ, to comply with latest updates on the VIQ

and, to highlight the list of repeated observations and targeted

items.

COURSE SYLLABUS: Discuss history of SIRE, revisions of the

Programme, uniform Vessel inspection Procedures, Inspector

Manuals, How to use SIRE – VIQ, Revision of the 2008 Edition,

Conduct of Inspections, Permitted Inspection actions,

Inspection Suggestions and, Distribution of Reports, and

discussion on Incident Awareness

TRAINING METHOD: Involves lecture, power point

presentation and Audio Visual Presentation.

COURSE MATERIALS: Handouts and latest vessel

questionnaires will be given to each participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All Deck

and Engine Officers.

Duration of the Course: 2 Days

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

AMOS MAINTENANCE & PURCHASE

COURSE (“Windows – Based”)

COURSE PROFILE: The course provides hands-on training for

Deck and Engine Officers involved in the operation of the

Planned Maintenance System on board as required by Class

Societies and Regulating Bodies, with an overview on how to

install and operate a standard AMOS – Windows installation.

COURSE SYLLABUS: Presentation and Practical information,

Brief PC introduction, Windows Interface, The AMOS for

Windows Concept, AMOS for Windows – overview of the

application, Data Registration and updating, The Maintenance

Cycle, Stock Control, The Purchase Cycle, Import and Export of

Data, Users and Password Control, Back-up procedures and

Exercises.

COURSE OBJECTIVE: To provide participants with a

comprehensive knowledge of the use of the AMOS-M&P

Planned Maintenance System. The Instructions are focused on

practical application wherein a personal computer is made

available for each participant.

TEACHING MATERIALS are collected in ringbinders of which

each candidate receives one copy.

A CERTIFICATE OF COMPLETION is given to each candidate who

fulfills the requirements of the course.

ENTRY REQUIREMENTS: Deck and Engine Offic ersinvolved

in the use of the AMOS-M&P Planned Maintenance

System on board.

COURSE ACCREDITATION

Xantic (AMOS M&P Software Maker)

CONSULTAS PLANNED MAINTENANCE

SYSTEM COURSE

COURSE PROFILE: The course provides hands-on training of

Deck and Engine Officers involved in the operation and use of

Consultas System Planned Maintenance System on board as

required by Class Society and Regulating Bodies. The structure

combines lectures with practical exercises using visual

presentation and printed course hand-outs. The course covers

the features of Maintenance System (e.g. scheduling of

Maintenance, reporting, etc.) and the Spare Parts System (e.g.

Inventory, Labelling, Ordering etc.). It also shows an overview

of the different modules as mentioned above.

COURSE SYLLABUS: Presentation and Practical Information,

Windows interface, The Consultas System Concept, Overview of

the application, Data registration and updating, The

Maintenance Cycle, Stock control, The Purchase Cycle, Import

and Export of Data, Users access and Password Control, Back-

up procedures and Exercises.

COURSE OBJECTIVE: To provide participants with a

comprehensive knowledge on the use of the Computer based

Consultas System. The instructions are focused on practical

application using “live” database wherein a personal computer

is made available for each participant.

A CERTIFICATE OF COMPLETION: is given to candidates who

have successfully completed the requirements of the course

ENTRY REQUIREMENTS: Preferably Deck and Engine Officers

involved in the use of the Consultas Planned Maintenance

System on board.

COURSE ACCREDITATION: A/S Consultas Norway

Duration of the Course: 3 Days

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

TM-MASTER Version 1 or Version 2

COURSE PROFILE: This course provides hands on training and

guidance as a user on the windows based tool for all Deck and

Engine Officers where each participant shall gain relevant

knowledge and be familiarized on the systematic planned

maintenance of machineries and as documentation of

maintenance carried out onboard the vessel.

COURSE OBJECTIVE: To provide participants with

comprehensive guidance on the maintenance of all Class

related machineries in order to obtain survey arrangement and

routine maintenance based on planned maintenance system.

COURSE SYLLABUS: Discuss importance installed TM Master in

view to maintenance of machineries, How to run TM Master,

Conduct hands training on revising the database as a user.

TRAINING METHOD : The method Involves TM Master Software

lecture and Audio Visual Presentations.

COURSE MATERIALS: Handouts and latest questionnaires will

be given to each participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for all

Electrical Engineer, Marine Transportation Officers and Marine

Engineer officers.

BRIDGE WATCHKEEPING FOR

CADETS

COURSE PROFILE: The course demands a high level of

participation and response from trainees and places emphasis

on the practical application of bridge watchkeeping principles

and collision avoidance manoeuvres. Theory is covered in

classroom lectures and using computer based learning

programmes. Practical exercises are conducted in a bridge

simulator and are followed by a thorough de-briefing and

analysis of each exercise.

COURSE OBJECTIVES: At the end of the course, participants are

expected to have a comprehensive understanding of bridge

safe watchkeeping principles, passage planning and bridge

team organization. This course aims for the following below to

be observed.

• Standard bridge procedures as per the ICS Bridge

Procedures Guide

• The use of radar and ARPA for navigation and

collision avoidance.

• Review of basic ship handing including squat,

interaction, shallow water effects and constant

radius turns

• Review and application of the Collision Regulations.

• Lights, shapes and sound signals

• Review of meteorology, and interpretation of

available weather data

• Navigational charts and their use

• Tidal calculations and tidal stream data

• Compass error calculations and compass deviation

• Calculation of time of meridian passage, sunrise and

sunset

• ETA calculations

• Detailed description of the IALA Maritime Buoyage

System

• Review of basic communications

• Record keeping and testing requirements

ENTRY REQUIREMENTS: This course is open to all trainee deck

officers. Minimum number of participants is three (3) and the

maximum number is eight (8).

TRAINING METHOD: Lectures to be followed by Practical and

Hands on exercises using the Bridge Simulator.

COURSE MATERIALS: Handouts to be given to each participant.

COURSE CERTIFICATION: A certificate of successful completion

shall be issued to those participants who successfully complete

the course and meet the assessment criteria.

Duration of the Course: 2.5 Days v1 / 2.5 Days v2

Duration of the Course: 5 Day

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

GALLEY AND STORES MANAGEMENT

COURSE

COURSE PROFILE: The course provides training and guidance

for Chief cooks as the head of catering department. Principles

are covered during classroom lectures and interactive

discussion. This course will teach participants about personal

and food hygiene, duties and responsibilities, menu planning,

control of victualling budget, proper garbage management and

the important ISPS regulations during storing.

COURSE OBJECTIVE: Trainees who successfully complete this

course shall have a comprehensive understanding of personal

and food hygiene, duties and responsibilities, menu planning,

control of victualling budget, proper garbage management and

the important ISPS regulations during storing.

TRAINING METHOD: Participants to undergo lectures,

interactive discussions.

COURSE MATERIALS: Handouts to be given to each participant.

ENTRY REQUIREMENTS: This course is open to all Chief Cook

/Chief Stewards. Mess man course is a prerequisite to this

course. Minimum number of participants is Ten (10) and the

maximum is twenty (20).

COURSE CERTIFICATION: A certificate of successful completion

shall be issued to those participants who successfully complete

the course and meet the assessment criteria.

MESSMAN COURSE

COURSE PROFILE: The course provides training and guidance

for stewards / messman. Principles are covered during

classroom lectures and interactive discussion. This course will

teach participants about HACCP principles, personal and food

hygiene and duties and responsibilities.

COURSE OBJECTIVES: Trainees who successfully complete this

course shall have a comprehensive understanding of HACCP

principles, personal and food hygiene and duties and

responsibilities.

TRAINING METHOD: Participants to undergo lectures,

interactive discussions.

COURSE MATERIALS: Handouts to be given to each participant.

ENTRY REQUIREMENTS: This course is open to all messman /

stewards. Minimum number of participants is four (10) and the

maximum is twenty (20).

COURSE CERTIFICATION: A certificate of successful completion

shall be issued to those participants who successfully complete

the course and meet the assessment criteria.

CERTIFICATE OF COMPLETION: A Certificate of completion is

given to each candidate who has satisfied the requirement of

the course

TRAINING METHOD: Involves lecture, power point

presentation, Audio Visual Presentation and practicum on

handling of paints and proper paint preparation and

application.

Duration of the Course: 2 Day

Duration of the Course: 1 Day

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

PORT STATE CONTROL

COURSE PROFILE: Developed by inspectors with USCG and Oil

Major Backgrounds, the course curriculum provides a complete

overview of the Port State and Vetting process. Detailed

descriptions of the most often cited deficiencies as well as

proven techniques to facilitate a successful inspection are

provided

COURSE OBJECTIVE: To prepare crew for Port State and / or

Vetting Inspections, increase crew safety awareness, while

preventing detentions, monetary fines, and off hire or

unemployment of the ship.

COURSE SYLLABUS: Introduction, the rationale behind Port

State and/or Vetting Inspection Schemes, the conduct of the

Port State and / or Vetting Inspection, Common Problems

encountered, Proven Techniques for preparing the ship, Case

Studies.

Assessment:

50 Question End of Course Test

1. Audio Visual Aids:

Port State Module: S&P Power Point Presentation: “Incidents

Lessons Learned”

“MTS Video “Conducting Onboard Drills”

“AMSA Video “PSC Inspection”

2. Vetting Module:

S&P Video “Use & Calibration of Gas Detection Instruments”

MTS VIDEO “Work Safe, Stay Safe”

MTS Video “Building a Safety Culture

Video-Tel “Passage Planning”

TRAINING METHOD: Involves lecture, power point presentation,

Audio Visual Presentation and Case Study Workshop.

COURSE MATERIALS: Handouts are given to each

participant.

A CERTIFICATE OF COMPLETION is given to candidates

who have successfully completed the requirement of

the course

ENTRY REQUIREMENTS: This course is designed for all officers

involved in Vetting Inspection.

ENCLOSED SPACE ENTRY &

PORTABLE GAS MEASUREMENT

EQUIPMENT

COURSE PROFILE: This course gives an advantage concerning

health, safety and environmental performance, and

minimisation of accident loss within this field. This includes

prevention of personal injury, occupational illness, major

accidents, property damage and pollution due to the activities

on board.

COURSE OBJECTIVE: To establish, maintain, and endeavour to

improve a quality standard for the correct use and maintenance

of available portable gas measuring instruments onboard.

COURSE SYLLABUS: Introduction/Rules and Regulations, Thome

requirements, Routines/laws & Regulations, Types of Gases,

Calibration Procedures, Measuring Procedures, Types of Gas

Detectors, Precautions in use/maintenance and storage of

instruments.

TRAINING METHOD: Involves lecture, power point

presentation and hands-on training.

COURSE MATERIALS: Handouts will be provided to each

participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All Deck

and Engine Officers

Duration of the Course: 1 Day

Duration of the Course: 1 Day

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

SHIPBOARD SECURITY AWARENESS

SEMINAR

COURSE PROFILE: The course provides training and guidance

for All Shipboard Personnel (masters, deck and engine officers

and ratings) the provisions for the implementation of the ISPS

Code (SOLAS Chapter XI) on board their vessels.

COURSE OBJECTIVE: The objective of the course is to provide

the participants with the working knowledge of the ISPS Code,

during its implementation on board and enhancing security

awareness and vigilance on board. Participants will be given a

demonstration on basic search technique, recognition of arms

and munitions as well as identification of explosive devices and

characteristics of persons who may pose as a possible threat

will also be exposed.

TRAINING METHOD: Involves lecture, power point presentation,

Audio Visual Presentation.

COURSE MATERIALS: Handouts are given to each

participant.

CERTIFICATE OF COMPLETION: A Certificate of

completion is given to each candidate who have

satisfied the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All

Shipboard Personnel

(Masters, Deck & Engine Officers and Deck & Engine Ratings).

BRIDGE TEAM MANAGEMENT

COURSE PROFILE: The course provides training and guidance

for masters and officers in charge of a Navigational Watch on

the principles and practice of Bridge Teamwork and Bridge

Resource Management as required by U.S. 46 CFR 10.205 (o)

and U.S. 33 CFR 157.415 as recommended by Section B-VIII/2 of

the STCW '95 Code. Principles are covered during classroom

lectures. Practical exercises are conducted in a full mission

bridge simulator and followed by a thorough de-briefing and

analysis of each exercise. Trainees will be required to plan

passages and then execute their plan in the simulator. This

course will teach situational awareness, decision making,

leadership, crisis management, communication, master/pilot

relationships, and voyage planning. Trainees will also be

required to plan and execute a passage in pilotage waters

working with a pilot as part of the bridge team.

COURSE OBJECTIVE: Trainees who successfully complete this

course shall have a comprehensive understanding of Bridge

Watch keeping Principles, Passage Planning, Bridge Team and

Bridge Resource Management.

TRAINING METHOD: Participants to undergo lectures,

familiarization of the ship bridge equipment + ( IBS ) Integrated

Bridge System and subsequently undergo different real life

scenarios on board vessels.

TRAINING MATERIALS : Handouts to be given to each

participant.

ENTRY REQUIREMENT: This course is open to all Deck officers.

Trainees shall have a thorough understanding of the application

of the Bridge Team and Resource Management and are

recommended to apply knowledge through Bridge Simulator

Exercises.

Minimum number of participants is four (4) and the maximum

is eight (8).

COURSE CERTIFICATION: A certificate of successful completion

shall be issued to those participants who successfully complete

the course and meet the assessment criteria.

Duration of the Course: 2 Days Senior / 3 Days Junior

Course Fee: USD 300.00 / 450.00

Duration of the Course: 1 Day

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

DRY CARGO HANDLING & STOWAGE

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge to use table on diagrams of stability

and trim data to calculate ships’ initial stability, draught and

trim for any given disposition of cargo and other weights. They

will also be able to determine whether stresses on the ships are

within tolerance by the use of stress data and take actions in

the event of partial loss of intact buoyancy.

COURSE SYLLABUS: This course includes Stability, Trim,

Buoyancies, Movement of the Center of Gravity, Causes of list,

Fresh Water Allowance, Initial Stability, Statical Stability, Angle

of Loll, Effect of Slack Tank, Action to be taken in the Event of

Partial Loss of Inatct Stability, Maintain Seaworthiness

TRAINING METHOD: Involves lecture, Power Point

Presentation, and Audio Visual Presentation.

COURSE MATERIALS: Hand-out, Copy of actual

Ship Capacity/Dead Weight Plan, Trim and Stability Table,

International Load line, and CBT on Trim & Stability are

Provided to each participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for all

Management Level Deck Officers and Junior Mates

aspiring for promotion

SHIP HANDLING FAMILIARIZATION

COURSE OBJECTIVE: To support existing knowledge and

experience of all deck Officer’s Management Level and provides

competence in Ship Handling and Maneuvering as per flag state

and principal’s requirements.

COURSE SYLLABUS: Introduction to Ship Handling, explain the

maneuvering ability of the vessel, define importance of

Planning, discuss the objective of training Rate of Turn, define

Pivot Point, explain the theories on how Thrusters work and

their limitations, explain the difference between Rudders and

Propellers, discuss the objectives of Anchoring & Docking, and

discuss the importance of Tugs.

TRAINING METHOD: Involves lecture, power point presentation,

and Simulator training exercises.

COURSE MATERIALS: Handouts are given to each participant.

A CERTIFICATE OF COMPLETION will be given to

candidates who have successfully completed the

requirement of the course.

ENTRY REQUIREMENTS: This course is designed for Deck

Officer’s Management level.

Duration of the Course: 2 Days

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

P&I INSURANCE & CREW CLAIMS

COURSE PROFILE: The course is designed to provide training

and comprehensive guidance to all Management Level Deck

and Engine Officers where each participant will gain relevant

knowledge and understand a wide range of P&I related subjects

which covers liability to parties such as other ship owners,

cargo interests and crew medical claims. It also includes

underwriting, claims, and introduces loss prevention ideas.

COURSE OBJECTIVE: To identify main insurances for ship-

owners, discuss key factors for a successful P&I Club and main

items included in the P&I coverage, identify different types of

insurance including their coverage, and explain early

notification of the company during emergency.

COURSE SYLLABUS: Introduction to P&I, the Scope of P&I

cover, introduction to Hull Insurance, crew medical claims

procedure, the Claims Process, Emergency Response, Salvage,

Collection of Evidence.

TRAINING METHOD: Involves lecture and power point presentation

COURSE MATERIALS: Handouts are given to each

participant.

A CERTIFICATE OF COMPLETION will be given to

candidates who have successfully completed the

requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All

Management level Deck and Engine Officers

(Masters, Chief Mates, Chief Engineers, and Second Engineers)

JOTUN PAINT COURSE

COURSE PROFILE: The course provides training and guidance

for All Shipboard Personnel (Chief Mates, Bosuns and AB’s) in

handling different kinds of paints, surface preparations.

COURSE OBJECTIVE: The objective of the course is to provide

the participants with the comprehensive theoretical knowledge

of good painting system in the Preparation, Application and

Evaluation of a paint job and the practical use of painting

equipments and understanding the coating system in a cost

effective method of protecting structure, resulting that

maintenance cost are reduced, and the risk of accidents which

affect people and the environment is also minimized.Those

who successfully complete the course should have gained

sufficient knowledge to:

ENTRY REQUIREMENTS: This course is designed for All

Shipboard Personnel (Chief Mates, Deck Officers 2nd

Engineers,

Bosuns and AB’s and Motormen).

COURSE MATERIALS: Handouts are given to each participant.

Duration of the Course: 1 Day

Duration of the Course: 2 Days

1. Understand how corrosion develops and the different

types of corrosion.

2. Understand the cost implication by failure to control

the vessel steel structure.

3. Understand the different types of generic paint and its

properties, where to apply, it’s chemical composition, its

advantages and its limitations.

4. Understand the different kinds of solvents/diluents.

5. Learn the preparation process on steel works.

6. Understand the different methods in the process of

pre-treatment prior to painting application.

7. Understand the different causes of paint failures.

8. Understand the safety, health and environmental

factors involved during paint preparation and

application.

9. Understand the principles of cathodic protection used

for the prevention of corrosion and protection of

structure.

10.Understand the use of paint equipments such as

magnetic and electromagnetic dry film thickness gauges,

contact thermometer, dew point calculator, etc.

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

ABB TURBOCHARGER COURSE

COURSE PROFILE: This course provides training and guidance to

all Management Level Engine Officers where each participant

shall gain relevant knowledge and understand turbocharger

introduction of innovative solutions to meet specific needs of

vessels machinery in order to optimize its power and operating

life. This will also enable engine officers to gain substantial

experience and exceptional knowledge to provide technical

help to resolve tough hands-on field situations.

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge to conduct proper dismantling and

cleaning for improvement of machine performance, accurate

assembly and disassembly of bearings and torque and torque

tightening, describe turbocharger component / selection and

distinguish its function, understand more about operation and

maintenance recommendation of a turbocharger, widen know-

how concerning turbocharger operational problems and

remedies, recognize possible causes of bearing failure like

excessive vibration, operating time, etc., and identify a number

of types of ABB turbocharger products.

COURSE SYLLABUS: Discuss ABB Turbochargers, Scope of

Supply of ABB Turbochargers, ABB Organizations, Turbocharger

Philippines, After sales Service, Turbocharger Dismantling and

Assembling (Plain Bearings), Operation and Maintenance,

Operational Problems and Remedies, and Tips for the operator.

TRAINING METHOD: Involves lecture, power point

presentation and Audio Visual Presentation, and hands on

training on proper instruction on assembly and disassembly of

turbine, measurement of clearances L & M, dynamic balancing

of rotor assembly, bearing inspection together with assembly

and disassembly, etc.

COURSE MATERIALS: Handouts are given to each

participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

Entry Requirement: This course is designed for All

Management level Engine Officers (Chief Engineers and Second

Engineers)

Duration of the Course: 1 Day

CLASSIFICATION COURSE

COURSE PROFILE: This course provides training and guidance

for Management Level Engine Officers where each participant

shall gain relevant knowledge about Class Survey on structural

arrangements and integrity with respect to vessels design,

maintenance and operation, and identify structural strength

with special attention to critical areas.

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge of carrying out correct preparation

and execution of inspection, identify critical structural areas of

inspection, recognize documentation of inspection and

corrective action, describe enhanced survey programme

principle, enumerate failures and casualties experience

feedback and understand systematics on Class Survey.

COURSE SYLLABUS: Discuss Classification Concept, Class

Systematics, Survey Procedures, Continuous Machinery Survey

(CMS), Planned Maintenance System (PMS), Port State Control

(PSC) Presentation, Safety of Life at Sea (SOLAS), Enhanced

Survey Programme (ESP), Loadline, Marine Pollution (MARPOL),

Bulk Carrier Requirements, Condition Assessment Scheme

(CAS), and Condition Assessment Programme (CAP).

TRAINING METHOD: Involves lecture, power point presentation,

and Audio Visual Presentation and Case Study.

COURSE MATERIALS: Handouts are given to each participant.

A CERTIFICATE OF COMPLETION is given to candidates

who have successfully completed the requirement of

the course.

ENTRY REQUIREMENTS: This course is designed for

All Management level Deck and Engine Officers

(Masters, Chief Mates, Chief Engineers, and Second

Engineers).

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

BOILER WATER TREATMENT COURSE

COURSE PROFILE: This course provides training and guidance to

all Management Level and Operational Level Engineers where

each participant will gain relevant knowledge and understand

detailed lecture on chemistry of boiler water, engine cooling

water, fuel, evaporator, and cooling seawater treatment as well

as training marine engineers in proper and ideal usage of Drew

Marine water treatment products.

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge to identify sampling and testing

procedures, identify pre-requisites for any boiler water

treatment program to be successful, learn proper boiler water

chemistry maintenance and treatment, point out System Inter-

dependence in the engine room, prevent formation of

scale/occurrence of corrosion in heating systems, cite the ideal

combination of chemicals for complete water control, improve

understanding of principles upon which the treatment of

cooling or boiler water is based, learn up-to-date techniques

and tips to optimize the effectiveness of chemicals used in

water treatment for cooling and boiler water, and know

differences between high and low pressure boilers.

COURSE SYLLABUS: Discuss scales, deposits & corrosion

problems, Ultra Marine Products (UMP), principles of Phos

Alkali Treatment, difference between high and low pressure

boiler water treatment and sampling and testing procedures. It

also includes evaporator, cooing water air-charge & seawater

cooling treatments, other system & 2000 series cleaner, Plasma

Arc Cutting, and types of corrosion.

TRAINING METHOD: Involves lecture, Power Point

Presentation, and Audio Visual Presentation.

COURSE MATERIALS: Hand-out and Shipboard

Water Treatment Manual are given to each

participant.

ENTRY REQUIREMENTS: 2nd

to 4th

Engineer Officers

COMMERCIAL OPERATIONS COURSE

COURSE OBJECTIVE: On completion of this training programme,

the participants should:

• Have developed a broad understanding of shipping

as a business and various aspects/elements of this

business.

• Have realized that he/she has an important role to

play in this business and his/her role has an impact

on the business.

• Have developed/refreshed understanding of various

commercial, technical and operational aspects of

shipping which affect the business elements.

• Be able to apply the acquired knowledge for

improving the economics of the business in

simulated situations.

COURSE SYLLABUS: Discuss Introduction to Shipping as

Business, Sources of Income, Managing Risk, Expenditures, and

Application of Commercial Knowledge.

TRAINING METHOD: Involves interactive lectures, power

point presentation. Case Studies and Group Discussions;

Workshops and Role Play.

COURSE MATERIALS: Handouts are given to each participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All level

Officers and Engineers, especially top four positions.

Duration of the Course: 2 Days

Duration of the Course: 3 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

OPERATION OF ELECTRICAL

INSTALLATIONS COURSE (FSE)

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge to conduct proper training in

electrical safety in order to prevent electrical accidents when

working with installations onboard.

COURSE SYLLABUS: Discuss safety regulations and precautions

in installations; current on the human body; regulation how to

work with or without power; faultfinding; safety devices; safe

use of instruments and fuses; first aid electrical accidents, etc.

TRAINING METHOD: Involves lecture, and Audio Visual

Presentation; case discussions and examinations.

COURSE MATERIALS: Handouts are given to each

participant.

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All

Management level Engine Officers (Chief Engineers and Second

Engineers) and Electricians

HULL STRUCTURE COURSE

COURSE PROFILE: This course provides training and guidance

for Management Level Deck and Engine Officers where each

participant will gain relevant knowledge and understand

enhanced survey principle, and learn from failures and

casualties from experience feedback.

COURSE OBJECTIVE: To provide participants with

comprehensive knowledge of classification of various hull

structures for vessel with double bottom or single skin,

understand functions of every structural element when

assessing structure of a vessel, recognize vessel characteristic-

its causes, distinguish particular consequence of incidents, and

identify structural functions about watertight integrity and hull

girder stiffness.

COURSE SYLLABUS: Introduction of an oil tanker and bulk

carrier structure. Illustration of structural functions and

breakdowns of ship SIDE, BOTTOM, LONGITUDINAL BULKHEAD,

WEB FRAMES, FWD & AFT PART.

TRAINING METHOD: Involves lecture, power point presentation,

and Audio Visual Presentation.

COURSE MATERIALS: Handouts are given to each participant.

Duration of the Course: 1 Day

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

EXTREME COLD WEATHER

PRECAUTION

COURSE PROFILE: This course provides training and guidance to

all Deck and Engine Officers where each participant shall gain

relevant knowledge and develop a healthy respect of the latent

power and strength of ice in all its forms.

COURSE OBJECTIVE: To provide participants with

comprehensive guidance about vulnerability of the vessel and

crew as well as preventive measures when navigating on ice

waters. This will assist the participants in steering successfully

in ice-covered seas.

COURSE SYLLABUS: Discuss types and signs of ice formation;

use of marine radar systems; regulations and publications

regarding ice navigation; vessel types, hull design, and ice

strengthening requirements; basic rules for maneuvering in

ice/preparations to be made prior to entering in ice.

TRAINING METHOD: Involves lecture, power point

presentation and Audio Visual Presentation, simulation

exercises.

COURSE MATERIALS: Familiarization on Ice Navigation

A CERTIFICATE OF COMPLETION is given to candidates who

have successfully completed the requirement of the course.

ENTRY REQUIREMENTS: This course is designed for All Deck

and Engine Officers.

INTRODUCTION TO OFFSHORE

INDUSTRY AND PRACTICES

COURSE PROFILE: This course provides training and guidance

for Deck and Engine Crew involved in the operation of Offshore

Industry on board. The structure combines lectures with

practical exercises using visual presentation and printed course

hand-outs. It covers the features of Oil and Gas Industry (e.g.

three main elements of Oil and Gas, type of Rigs etc.) Supply

Operations in correlated to Cargo Handling and Towing. It also

shows an overview of the different modules as mentioned

above.

COURSE OBJECTIVE: To provide particular Deck and Engine

crew a better understanding of Offshore course operations;

increase awareness of hazards related to Oil and Gas as well as

cargo handling operations and gives a broadest possible

updated picture of the industry.

COURSE SYLLABUS: Discuss the three main elements of Oil and

Gas, Supply operation in relations with Cargo Handling and

Towing. It includes the Seismic Survey that will determine the

detailed structure of rocks. This will also explain the Hazard

involved in offshore operations.

TRAINING METHOD: Involves lecture, power point presentation,

Audio Visual Presentation and Case Study Workshop.

COURSE MATERIALS: Handouts are given

to each participant.

A CERTIFICATE OF COMPLETION is given to candidates

who have successfully completed

The requirement of the course.

ENTRY REQUIREMENTS: This course is designed for all

shipboard personnel

Duration of the Course: 1 Day

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

REFMAN COURSE

COURSE PROFILE: This course provides training and guidance

for Management Level Deck and Engine Officers where each

participant shall gain relevant knowledge about operation of

REFMAN Computer System which covers the Specification

Generator and Cost Control programs as well as supporting

menus and utility programs.

COURSE OBJECTIVE: To provide participants the guidance that

is necessary to enable a novice to begin to use the system.

Moreover, it provides a source of reference to assist the more

experienced user. This will allow technical people who are

involved with day to day running of ships to take control of the

ship repair process.

COURSE SYLLABUS: Introduces the user to the system and

provide an overview of how to operate both the software and

various hardware components; describe the various menus and

screens that the user will encounter when using the

Specification Generator and Cost Control modules; provides a

summary of each of the main operations that you will need to

perform on a day-to-day basis.

TRAINING METHOD: Involves lecture and power point

presentation.

COURSE MATERIALS: Handouts are given to each

participant.

A CERTIFICATE OF COMPLETION is given to candidates

who have successfully completed the requirement of

the course.

ENTRY REQUIREMENTS: This course is designed for All

Management level Deck and Engine Officers (Masters, Chief

Mates, Chief

Engineers, and Second Engineers)

RISK MANAGEMENT AND INCIDENT

INVESTIGATION COURSE

COURSE PROFILE: This course provides training and guidance

aimed to improve Management and Operational Level Deck

and Engine Officer’s competence in order to have a competitive

edge for their company in relation risk management and

incident investigation for ship’s operations.

COURSE OBJECTIVE: To provide participants with an overview

of the Systematic techniques and the practical application of

risk management and incident investigation.

COURSE SYLLABUS: The syllabus follows very closely the model

developed by DNV to enhance and expand the risk

management focus of an organization on board as well as

learning about risk assessment techniques and application.

TRAINING METHOD: Involves classroom lectures, power point

presentation, and case study workshops aimed to give a practical

understanding.

COURSE MATERIALS: Handouts are given

to each participant.

A CERTIFICATE OF COMPLETION is given to candidates

who have successfully completed the requirement of

the course.

ENTRY REQUIREMENTS: This course is designed

for all Deck and Engine Management &

Operational Level Officers

Duration of the Course: 1 Day

Duration of the Course: 2 Days

THOME SHIP MANAGEMENT PTE LTD - (ROHQ)

MANAGERS & CONSULTANTS MANILA

TSM Maritime Training Center, 1749 Dian St. Palanan, Makati City 1235

Telephone No. 860-7500 Fax No. (632) 556-6074

COMING SOON / NEW COURSES……

Large Vessel Ship Handling (1Day)