42

TRAILER JACKS

5716-24Z 5719-245719-24Z

*

* More Hammerblow Swivel Jacks on page 44

*

* More Hammerblow Swivel Jacks on page 44

141304 1 Wide Track (F2) 7" diameter wide wheel jack - 1600 lbs. capacityWheel rolls independently to make changing direction smooth andeffortless. Revolutionary adjustable mount & swivel system.Anodized finish. Includes hardware for 3”x3” or 3”x4” frame.

141302 1 Twin Track (F2) -as above with (2) 7" diameter wheels

XPD15L

ECLIPSE MARINE SWIVEL JACKEJ1000

141304141302

43

TRAILER AND SPECIALTY JACKS • JACK REPLACEMENT PARTS

*

* More Hammerblow A -Frame & Square Leg Jacks on pages 44 thru 46

CD555 1 Dual 6” Wheel Caster Assembly (not shown)017125 1 Steel 6” Wheel Caster Assembly (not shown)

#F2000S - 2.1” tall, 2K-5K

#F2000 - 8” extension, 2K-5K

018917018917

1033304S

*

190754

CE111 1 Caster Assembly (as above) for 1000 lb. capacity jacks

#6811S- 6” Poly Wheel Only

HEAVY DUTY 7K SQUARE LEG JACKSBULLDOG

155154 1 Bulldog Sidewind weld-on/bolt-on A-Frame Jack1000 lbs. capacity with removable poly wheel.

44

The 151101 Jack comes complete with weld-on swivel brackets, snap ring, and steel disc foot.

PART NO. LIFT LIFT BRACKET RETRACTED

CAPACITY HEIGHT HEIGHT151101 2,000 LBS 10” 11.25” 17.5”

BULLDOG SIDEWIND SWIVEL, SNAP RING MOUNT JACK

BULLDOG TOPWIND SWIVEL, SNAP RING MOUNT JACKS

BULLDOG TOPWIND A-FRAME JACKS

BULLDOG SIDEWIND SWIVEL, PIPE MOUNT JACKS

BULLDOG TOPWIND SWIVEL, PIPE MOUNT JACKS

These Swivel, Snap Ring Mount Jacks come complete with a weld-on swivel bracket and snap ring.The lock pin secures jack in up or down position. Steel disc foot on bottom of jacks.

PART NO. LIFT LIFT BRACKET RETRACTED

CAPACITY HEIGHT HEIGHT151401 2,000 LBS 10” 11.25” 18.5” 151421 2,000 LBS 15” 14.5” 27.75”171401 5,000 LBS 10” 11.25” 18.5” 171412 5,000 LBS 15” 14.5” 27.75”

For bolt-on or weld-on applications. These Jacks are used with A-Frame couplers. 155200 comes complete with a poly-wheel. 155300 comes complete with a steel wheel..

PART NO. LIFT LIFT BRACKET RETRACTED

CAPACITY HEIGHT HEIGHT175022 5,000 LBS 15” 12” 30.00”155022 2,000 LBS 15” 12” 30.00”155200 1,000 LBS 15” 12” 32.25” 155300 1,000 LBS 15” 12” 32.25”

TRAILER JACKS

For industrial and agricultural applications, these Jacks come complete with mounting brackets. Pipe swivel mounting gives superior side load stability for the most demanding situations. Available in capacities ranging from 2,000 up to 7,000 lbs. Steel disc foot on bottom of jacks.

PART NO. LIFT LIFT BRACKET RETRACTED

CAPACITY HEIGHT HEIGHT158109 2,000 LBS 10” 11.25” 17” 158151 2,000 LBS 15” 14.5” 26.5”178201 5,000 LBS 10” 10” 17.5” 178203 5,000 LBS 15” 15” 21.75”195362* 5,000 LBS 15” 15.1” 22.1”198150 7,000 LBS 10” 10” 17”198250 7,000 LBS 15” 15” 22”*Square Leg Jack with Square Collar, Manual Swivel

For industrial and agricultural applications, these Jacks come complete with mounting bracket and steel disc foot. Pipe swivel mounting gives superior side load stability for the most demanding situations.

PART NO. LIFT LIFT BRACKET RETRACTED

CAPACITY HEIGHT HEIGHT158451 2,000 LBS 10” 11.25” 18” 158452 2,000 LBS 15” 14.5” 27.75”178101 5,000 LBS 10” 11.25” 18.5” 178151 5,000 LBS 15” 14.5” 27.75”198100 7,000 LBS 10” 10” 18.5”198200 7,000 LBS 15” 15” 20”

195362

45

• Rolled acme threads and steel anti-friction thrust bearings, provides smooth cranking and long cycle life• Large diameter tubing with ample tube overlap for safe, strong service for years• Painted outer tube and zinc plated inner tube provide corrosion resistant finish• Tubular (G) mount features a 5/8” diameter pin. Snap-ring (S-mount) mount features a 3/8” diameter pin• Available in 10” and 15” travel/extension• Heavy gauge zinc plated steel foot provides a large, strong base for lifting heavy loads on soft ground• Made in USA

Jacks may be purchased complete with mounting hardware installed.

TRAILER JACKS

• Rolled acme threads and anti-friction thrust bearings provide smooth cranking and long cycle life.

• High strength tubing and ample tube overlap delivers safe, strong service for years.• Sidewind jacks feature 1:1 sidewind gear ratio providing more travel with less cranking to

lift or lower the jack.• Topwind handle design provides easier cranking by utilizing your arms most

efficient muscles.• Sidewind jacks feature the molded, vinyl gear cover cap

that fits securely, but can be removed for jack lubrication and service - will not rust.

• Painted inner and outer jack tubes.• Made in U.S.A.

Part No.

1000 LB.JA104TJA104S 2000 LB.155010 5000 LBS.JP514T5719-24Z

Description

A-Frame jackA-Frame Jack

A-Frame Jack

Drop-thru jackA-Frame Jack

Travel

14”14”

14”

14”14”

Handle

Type

Top windSide wind

Side wind

Top WindTop wind

Caster

CE111CE111

CE555

CE555CE555

Support Foot*

F1000F1000

F2000

F5000F5000

A-Frame Plate*

--

-

SPA-50-

Bottom

Support Plate*

SPB 10SPB 10

SPB 50

SPB 50SPB 50

Overall Length

Retracted (A)

20.022.0

21.0

1919

Travel (B)

1414

14

1414

A-Frame Plate

Attachment

6.006.00

7.00

-9.00

151401

151101

158451

158109

151421

158486

158151

178112

INDUSTRIAL AND AGRICULTURAL JACKS

A-FRAME / JA & DROP-THRU JACKS

#1624S01Top Wind Replacement Handle

TRAILER JACKS

Hammerblow's ever-popular Rack-Jacks are available in many mounting and foot options. Choose the gear boxes and rack post best suited for your particular needs.

PART NO. DESCRIPTION161100 750Lb. cap rackpost and disc foot, 23 3/4”tall, with an “L” shaped weld-on gearbox 161200 560Lb. cap rackpost and poly wheel, 27 3/4”tall, with an “L” shaped weld-ongearbox161300 750Lb. cap rackpost and steel wheel, 27 3/4”tall, with an “L” shaped weld-on gearbox162100 750Lb. cap rackpost and disc foot, 23 3/4”tall, with an “L” shaped bolt-on gearbox162200 560Lb. cap rackpost and poly wheel, 27 3/4”tall, with an “L” shaped bolt-on gearbox162300 750Lb. cap rackpost and steel wheel, 27 3/4”tall, with an “L” shaped bolt-on gearbox165111 750Lb. cap rackpost and disc foot, 23 3/4”tall, with an “A” frame gearbox165211 560Lb. cap rackpost and poly wheel, 27 3/4”tall, with an “A” frame gearbox165311 750Lb. cap rackpost and steel wheel, 27 3/4”tall, with an “A” frame gearbox

190 SERIES: The convenience of a dropleg when a full-size dropleg jack would be too large. This midsize jack features 2 1/2” square outer tubing and plated inner leg and drop leg section. Available in Topwind (190500) or Sidewind (190510 & 190756, which include welded tube mount)

182 SERIES: These full size dropleg jacks feature a 4” square outer tubing and come with a detachablehandle. Sidewind available with standard inner dropleg (182450 & 182404) or optional spring-loadedinner leg for automatic retraction (182800), as well as top wind with standard inner dropleg (182304).

183 SERIES: Similar to 182 series, the 183 series are 2 speed jacks.

PART NO. STATIC LIFT LIFT DROP LEG RETRACTED

LOAD CAPACITY TRAVEL HEIGHT190754 7,000 LBS 5K w/tube mount 15” 13 1/2” 25.6”190704 8,000 LBS 7,000 15” 13 1/2” 22.6”190756 8,000 LBS 7K w/tube mount 15” 13 1/2” 25.5”183416 10,000 LBS 2 Speed 12 1/2” 13 1/2” 27.5”183816 10,000 LBS 2 Speed w/spring return 12 1/2” 13 1/2” 27.5”182304 12,000 LBS 10,000 12 1/2” 13 1/2” 22.5”182404 12,000 LBS 10,000 12 1/2” 13 1/2” 27.5”182450 12,000 LBS 10,000 12 1/2” 13 1/2” 31.6”182800 12,000 LBS 10,000 12 1/2” 13 1/2” 27”015181 Side Wind Replacement Handle800075 Top Wind Replacement Handle

PART NO. STATIC WIND LIFT TRAVEL RETRACTEDLOAD HEIGHT

0091340 7,000 LBS Side Wind 16” 26” 25.75”0091310 7,000 LBS Top Wind 16” 26” 22.35”

RACK POSTS AND GEAR BOXES

BULLDOG DROP LEG JACKS

BUYERS DROP LEG JACKS (IMPORTED) - 2-1/2” SQUARE

ATWOOD POWER JACKS

BUYERS POWER JACK

Atwood Power Jacks make positioning a trailer hassle-free. Our Low Cost Power Jack lifts 1,500 lbs.and also has a manual override. HD 1 7/8" tubing on the Low Cost Power Jack and 2 1/4" tubing onthe Deluxe Power Jack, and sturdy footpads provide for greater trailer stability. The rugged 12 V DCelectric gear motor easily lifts heavy loads and is proven in years of RV use under adverse conditions.

PART NO. DESCRIPTION A B RETRACTED EXTENDED80236 1500 lb., Light Duty 10 1/8 14.75 24 7/8 39.2580511 2500 lb., Standard Duty 10 1/8 14.75 24 7/8 39.2580515 2500 lb., Deluxe Power Jack 10 1/8 14.75 24 7/8 39.2580530 3500 lb., Heavy Duty 10 1/8 14.75 24 7/8 39.25

• 12 Volt DC powered with manual crank over-ride • 3,500 lbs lifting capacity• Full 18" stroke: (12" Power + 6" manual drop leg extension) • Quick 30 second stroke time• Over sized, 5" diameter foot pad prevents divots • Zinc plated foot is adjustable

• Built-in leveling gauge • Dual night lights • Weather sealed switch • 26" overall height

PART NO. DESCRIPTION0093500 3500 lb., Heavy Duty 5,000 lbs breakaway capacity

46

PART NOS. 11-200, 11-250, 11-300, 22-200, 22-250, 22-300• For 1 7/8” and 2” ball sizes, Class I and Class II trailers• Available for 2”, 2 1/2” and 3” tongue widths• Available in bulk pack, prime painted, zinc plated, oily assembled or unassembled and

individually boxed.• 11-series for 1 7/8” ball couplers and 22-series for 2”

TRAILER COUPLERS

FAS-LOK™ STRAIGHT TONGUE COUPLERS

MODEL NO.

11-20011-200B11-25011-250B11-30011-300B

22-20022-200B22-25022-250B22-30022-300B

33-30534-30030844-305

FINISH

ZincClean SteelZincClean SteelZincClean Steel

ZincClean SteelZincClean SteelZincClean Steel

PaintedPaintedPaintedPainted

BALL SIZE

1 7/8”1 7/8”1 7/8”1 7/8”1 7/8”1 7/8”

2”2”2”2”2”2”

2”2”2”2 5/16”

SAE CLASS

IIIIII

IIIIIIIIIIII

IIIIIIIII*IV

TRAILER G.V.W.

2,000 lbs V2,000 lbs2,000 lbs.3.500 lbs.3,500 lbs.3,500 lbs.

3,500 lbs.3,500 lbs.3,500 lbs.3,500 lbs.3,500 lbs.3,500 lbs.

5,000 lbs5,000 lbs5,000 lbs.10,000 lbs.

TONGUE MOUNT

2” Wide Channel2” Wide Channel2 1/2”Wide Channel2 1/2” Wide Channel3” Wide Channel3” Wide Channel

2” Wide Channel2” Wide Channel2 1/2” Wide Channel2 1/2” Wide Channel3” Wide Channel3” Wide Channel

50º A-Frame3” Wide Channel2 7/8” Wide Channel50º A-Frame

COUPLER SELECTION GUIDE

PART NO. 34-300• Straight tongue class III FAS-LOK™ Coupler• Available for 3” tongue widths & 2” ball• Available assembled prime painted

FAS-LOK™ II, CLASS III, COUPLER

PART NO. 33-305• 5000 lb. trailer G.V.W. rating• Standard 50º A-frame and jack mounting holes• Serviceable ball clamp assembly for field replacement• Available assembled with prime painted finish

FAS-LOK™ 2”, CLASS III, A-FRAME COUPLER

PART NO. 44-305• SAE 10,000 LB. G.V.W. rating • Ductile iron ball clamp• Stainless steel spring and pivot pin • Easy to use latching mechanism• Positive open latch feature • Padlock hole provided for trailer security

CLASS IV - 2 5/16” A-FRAME COUPLER

47

PART NO. CH0701ALLOWS FOR EASY TRAILER POSITIONING

• Fits all 1 7/8” and 2” couplers• Does not include coupler

HANDI-GRIP COUPLER HANDLE

TRAILER COUPLERS

PART NOS. 107, 308• The heavy duty handwheel couplers are preferred for rental and utility trailers.• Made in U.S.A. • #107 for 1 7/8” trailer balls • #308 for 2” trailer balls

CLASS I & II HANDWHEEL COUPLERS

KIT NO. DESCRIPTION BALL DIA.52 Kit for 306, B-6, 308, B-8 couplers 2”/2 1/8”56 Kit for 107, 108,07 & 08 couplers 1 7/8”58 Kit for 11 and 1 Series Fas-Lok couplers 1 7/8”59 Kit for 22 and 2 Series Fas-Lok couplers 2”60 Kit for 34-300, 33-305 couplers 2” 61 Kit for 34-308 couplers 2”Note: Valley Repair Kits also available.

COUPLER REPAIR KITS

Adjustable Part # 028760Overall Height - 29 1/2"Adjustment - 11"3/4" Set Screws4 1/2" O.D. WallOuter Tube4" O.D. x 1/4" WallInner TubeShipping Weight - 50 lbs.

Fixed Part # 028750Overall Height - 34"

4 1/2" O.D. x 1/4" WallFixed Tube

Shipping Weight - 39 lbs

GOOSENECK STYLE 20,000 LB.COUPLER FOR 2 5/16” BALL PART NO. 028760

Coupler Assy.Locking Pin Assy.Locking Pin CoverBulldog LabelWarning LabelShipping Weight - 10 lbs.

GOOSENECK COUPLER REPAIR KIT PART NO. 028150

48

PART NO. GN24• 24,000 lb. rating 2 5/16” ball • Weld easily to 3” - 4” pipe size• Quick and easy locking and unlocking action - no need to climb into tow vehicle bed• Made in U.S.A.

2 5/16” GOOSENECK COUPLER

49

TRAILER COUPLERS

For 2" Hitch BallsS.A.E. Class 2 for:3" channel, bolt-on3,500 lbs. G.V.W.Part No. 80051 - painted

80051 STRAIGHT TONGUEFor 2" Hitch BallsS.A.E. Class 3 for:2" channel, weld-on5,000 lbs. G.V.W.Part No. 80082 - painted

80082 STRAIGHT TONGUE

For 2 5/16" Hitch BallsS.A.E. Class 4 for:3" channel, weld-on8,500 lbs. G.V.W.Part No. 80131 - painted

80131 STRAIGHT TONGUEFor 2" Hitch BallsS.A.E. Class 3 for:500 A-Frame, 5,000 lbs. G.V.W.Part No. 80072 - painted

80072 500 A-FRAME

For 2 5/16" Hitch BallsS.A.E. Class 4 for:500 A-Frame, 10,000 lbs. G.V.W.Part No. 81911 - painted

81911 500 A-FRAME 82680 500 A-FRAMEFor 2 5/16" Hitch BallsS.A.E. Class 4 for:500 Underslung A-Framemounting 10,000 lbs. G.V.W.Part No. 82680 - paintedPrimarily used for recreationvehicles

These durable, drop-forged Couplers are of heavy-design for horse, boat, travel and industrial trailers.Spring-loaded locking collars with convenient thumb latch provide positive-action coupling.

PART NO. REF. NO. BALL MOUNT CAPACITY0091040 028287 2" 50 DEGREE A-FRAME 7,000 LB.0091045 028463 2 5/16" 50 DEGREE A-FRAME 12,500 LB.

BUYERS A-FRAME COUPLERS

ATWOOD COUPLERS

These durable, drop-forged Couplers are designed for those who place quality and dependability above price. Spring loaded collars provide positive action coupling, heavy gauge metal structure assures longevity.

PART NO. REF. NO. BALL TONGUE SIZE CAPACITY2B2 028711 2" 2 1/4" I.D. ROUND SHANK 5,000 LB2B4 028721 2" 3" SQUARE 5,000 LB4B2 028461 2 5/16" 2 1/4" O.D. ROUND SHANK 12,500 LB4B4 028462 2 5/16" 3" SQUARE 12,500 LB

BULLDOG STRAIGHT TONGUE COUPLERS