Traffic Rules Clarity
description
Transcript of Traffic Rules Clarity
Traffic Rules ClarityFebruary 2013Mine Operations
Right of Way Priorities
• Priority One - Emergency Vehicles with flashing lights
• Priority Two - Haul Trucks−Regardless of size or type−Haul truck to haul truck traffic always gives way to the left
• Priority Three - Mobile Equipment
• Priority Four - Light Vehicles
Operational Areas
3
• Work areas such as shovel pits, waste dumps, drill patterns, etc.
• Areas may be permanent or temporary− Ex: Excavator working on haul road
• Equipment could be travelling in any direction
Exclusion Zone50m from any piece of working equipment• Used to control interactions between equipment and other vehicles
• Positive Communication and permission from operator is required to enter the exclusion zone
• Examples include:− Approaching a loading unit− Passing a loader building berm
Parking
4
• Park Brake MUST be applied
• Demarcated Parking Areas
− An area with a surface intended for parking vehicles and equipment
− The speed limit in all park-up areas is 15 km/h
− Must be parked in a manner that is fundamentally stable
• Outside Demarcated Areas− Wheel chocks MUST be used− Keep a minimum of 6m between all parked equipment and vehicles to
maintain visibility− Park in a safe area out of traffic
Roadways
5
• At no time shall a light vehicle or haul truck overtake another light vehicle or an operating haul truck
• Maintain minimum 50m following distance behind haul trucks at times
• No haul truck, equipment, or light vehicle shall stop, block, or impede any intersection
• All vehicles approaching a stop sign must come to a complete stop. In absence of a stop sign apply “right of way protocol”
Intersections
6
• A place where two or more roads meet
• Right of Way Priorities are to be followed by all, unless a stop sign exists
• Stop signs shall be followed by all vehicles and equipment
• If any equipment or vehicle loses traction or breaks down in an intersection inform Mine Dispatch immediately on radio Channel 5 and clearly demarcate the area
Vehicles need to exercise caution when approaching all intersections
U-Turns
7
• Equipment of any size may perform a U-Turn using these steps• Conduct only where road width allows for one continuous turn to
the driver’s good side• NO U-turns allowed at:− Intersections− Park-up areas− Where people are on the ground
• Come to a controlled and a complete stop using wheels and turn signal to indicate U-turn
• Ensure clear visibility in both directions and complete turn• Except for normal operation in an operational area, blind side U-
turns require a spotter