TRAFFIC CALMING - US Reflector
of 16
/16
Embed Size (px)
Transcript of TRAFFIC CALMING - US Reflector
WWW.USREFLECTOR.COM Page C-1 Prices reflect single units only,
please contact your sales representative for quantity pricing
RUMBLE STRIPS are an innovative traffic safety product designed for traffic calming.
Rumble Strips create audible vibrating warnings for all vehicles approaching reduced speed zones. These day/night visibility warning devices utilize highly reflective reflective durable coatings and provide excellent reflective visibility during wet, nighttime conditions. Can be used for temporary or permanent applications.
Alert drivers through a combination of safety features in just one product.
RUMBLE STRIP MODEL R1
Size: 4” x 6”
Highly reflective, brilliant white or yellow profiled rumble strips designed for use where reflective traffic calming and speed reduction are required.
Unique design affords motorists with both standard and wet night reflectance along with audible and vibratory features to enhance drivers alertness.
Ideal for transverse speed reduction in construction zones, school zones, children play zones, reduced speed zones, railroad crossings, bridge decks, roadway shoulder chann- elization and other applications requiring speed reduction and/or traffic calming.
Non-Reflective Black Non-reflective black matte finish profiled rumble strips designed for use where traffic calming and speed reduction is required. Provides an audible and controlled vibratory warning to motorists, alerting them that a change in driving patterns is required as a result of upcoming traffic hazards. Black matte finish blends into bituminous asphalt surfaces.
RECOMMENDED FOR USE ON ASPHALT OR SMOOTH CONCRETE SURFACES. TEMPORARY OR PERMANENT INSTALLATIONS.
CONTACT CEMENT: One gallon of contact cement covers approximately 50 to 75 sq ft. 10 rumble strips = 20 square feet.
CONSULT APPLICATION INSTRUCTIONS OR YOUR REPRESENTATIVE PRIOR TO USE.
Yellow 4' x 6" 0351-6Y-RRS 1 $ White 4' x 6" 0351-6W-RRS 1 $ Black 4' x 6" 0351-6BK-NRS 1 $
Yellow 4' x 6" 0350-6Y-RRS 10 $ White 4' x 6" 0350-6W-RRS 10 $ Black 4' x 6" 0350-6BK-NRS 10 $
Contact Cement 0355-1CC 1 Gal $ 0355-5CC 5 Gal $
Bituminous Call Each piece 6” x 4”
Single units: COLOR SIZE ITEM # QTY COST
Box of 10 units (40 Linear feet) COLOR SIZE ITEM # QTY COST
ADHESIVE TYPE ITEM # SIZE COST
TRAFFIC CALMING
WWW.USREFLECTOR.COM Page C-2 Prices reflect single units only, please contact your sales representative for quantity pricing
Unique stone surface offers skid resistant, impervious protection and represents an audible warning device that can be adhered to pavement, con- crete, steel, ceramic and wooden surfaces.
Road Carpet resembles existing pavement surfaces with a higher level of anti-skid properties. Unlike pavement, Road Carpet has the ability to stretch, and conform to virtually any surface without cracking or splitting. Available in reflective and non-reflective surfaces .
ROAD CARPET
BRIDGE DECKS - wood and steel Bridge decks can be equipped with individual strips or complete surface coverage utilizing carpet rolls.
Road Carpet has incrusted epoxy coated stones built into a flexible PVC support offering a permanent skid resistant surface.
APPLICATIONS Road Carpet performs its function in a variety of applications including, bridges, rumble strips, metal construction plates, vehicle and pedestrian ramps, pathways and crosswalks. Quick, easy installation characteristics make it an excel- lent protective, anti-skid surface choice for all applications in their respective categories.
WEAR CHARACTERISTICS Road Carpet utilizes Bohixi type stones providing extremely durable and natural anti-skid properties. RC-BX-03 and RC-BX-04 have less than 1% granular loss per one million vehicles.
ROAD CARPET ANTI-SKID Rumble strips for bridges, ramps and turns.
TEMPORARY OR PERMANENT Choosing between 2 adhesives allows Road Carpet’s installation to be temporary or permanent.
Road Carpet bonds perfectly to steel construction plates.
RC-BZ-03-Y RC-BZ-04-Y
COST
Adhesive
RESURFACING Designed originally to patch roads, Road Carpet now defines the meaning of “Out door carpet”. AVAILABLE SIZES Road Carpet is available in 6” strips or 4 feet wide rolls up to 60 feet in length. Carpet can easily be cut to size utilizing a utility knife. ADHESIVE Polyurethane Industrial strength interior and exterior polyurethane adhesive can be applied to most all surfaces including: PVC, rubber, concrete, metal, glass, ceramic, wood, sandstone, asbestos and rigid foam. Bituminous “Hot Melt” adhesive can be used on pavement for temporary or permanent applications.
STRONG AND DURABLE Road Carpet’s exposed surface can protect surfaces or reduce deterioration on surfaces such as steel, concrete, asphalt and wood. Can be used as an immediate solution for covering exposed, deteriorating, cracked, and splintering surfaces quickly and effectively.
TRAFFIC CALMING
RUBBER BUMPS
WWW.USREFLECTOR.COM Page C-3 Prices reflect single units only, please contact your sales representative for quantity pricing
Flexible, easy to install rubber speed bumps for speeds under 30 m.p.h.
100% recycled rubber speed bumps for areas where vehicle speed is problematic. Rubber speed bump’s superior construction resists warping, rotting, chipping and temperature differences. Designed for smooth rollovers.
Diagonal reflective yellow strips with “Cats Eye’s” provide approaching motorists with an awareness of the necessity for speed reduction. Two models available: 4 foot and 6 foot with either glass eyes or top mounted markers for enhanced night visibility.
EASY ROLLOVER SPEED BUMPS
Easy Rider type bumps are equipped with reflective yellow stripes and “Cat’s Eye” glass beads.
Glow Rider type bumps are equipped with top mounted yellow 2 face prismatic reflective markers.
Standard lengths and uniform sizes allow the bumps to be joined at the ends for greater lengths. Both models are available in 4 ft. and 6 ft. lengths.
End caps for speed bumps adapt to both Easy Rider and Glow Rider for smooth round roll overs.
Channeled under- side has two 11/4” x 1” grooved conduits allow- ing for cable/piping pro- tection and drainage.
Glow Rider model with top mounted double faced prismatic markers.
BENEFITS
100% recycled rubber Reflective yellow paint Integrated reflectors Channeled underside 4 foot and 6 foot lengths Warping and rot resistant U.V. and oil resistant Lineal attachment capability Flexible and non conductive Temporary or permanent Optional end caps
HIGHLY VISIBLE
INSTALLATION Asphalt STEP ONE: Drill a 1/2 inch hole with a masonry carbide bit.
STEP TWO: Insert 14” capped rebar spike into predrilled hole and hammer into position.
Concrete Utilize 1/2” diameter lag bolts 5” in length.
Anchors 4 foot requires 3 spikes / lag bolts 6 foot requires 4 spikes / lag bolts
Easy Rider
Glow Rider
Dimensions both models are sized at 2.25 inches in height x 12 inches in width.
Item # Length Description Cost 355-4ER-SYP 4 ft. Easy Rider 355-4GR-PM 4 ft. Glow Rider SB-4BK-3S8GB 4 ft. Tiger Tooth 355-6ER-SYP 6 ft. Easy Rider 355-6GR-PM 6 ft. Glow Rider SB-6BK-3S8GB 6 ft. Tiger Tooth 355-END Extreem element 315-5-LB 5 in. Lag Bolt x 1/2” 357-14-SPK 14 in. Spike
$ $ $ $ $ $ $ $ $
™ SPEED STAR
DESCRIPTION Speed-Star traffic calming devices are a unique approach to traditional speed bumps. No matter what width the road may be, you can pick and choose as many Speed Stars as needed to accommodate your application.
BENEFITS Individual Speed Stars for random installation and personalized configurations. Single point anchoring system. Temporary and permanent applications.
Audible visual noise warning devices for traffic calming
Traffic calming Modular Day & Night visibility
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
DIMENTIONS Width: 8 ¾ inches Height: 1 ¼ Inches Weight: 2 lbs
Speed Stars are a safe, non aggressive visual solution to controlling traffic in municipal and commercial applica- tions. Each Speed Stars come with lag bolt and sleeve,
Highly visible Individual mounted Speed Stars have mass tinted yellow triangles for long term visibility. Unlike coated or painted materials that wear over time. Speed-Stars can be used for short term or long term applications. Simply remove anchor cap and remove lag bolt for winter ap- plications.
Individual placement
Quick instal
Esthetic Audible noise warning
10-12 cm
10-12 cm
Long term applications Speed-Stars can be used for short term or long term applications. Simply remove anchor cap and remove lag bolt for winter applications.
APPLICATION Speed Stars can be installed in single or multiple rows accommodating any length or width of road. Spacing between Speed Stars is 4 to 10 inches on average based on application requirements.
Asphalt or concrete
Long term applications
HW-315-L Lag bolt
HW-315-LS Lag shield
WWW.USREFLECTOR.COM Page C-4 Prices reflect single units only, please contact your sales representative for quantity pricing
All purpose plastic speed bumps for speeds under 30 m.p.h.
Solid plastic speed bumps are economical and can be used as “All purpose” speed bumps. Two models are available, Standard and Deluxe. Both models identify the necessity for speed reduction to oncoming motorists. The standard model has a lower profile for sensitive areas and is available in 9 ft lengths. Bumps are manufactured in solid yellow with 100% post-consumer, post-industrial recycled plastics.
AN ENVIRONMENTALLY CONSCIOUS PRODUCT
DELUXE
Solid Deluxe Speed Bumps are available in 2 sizes (4 ft. and 6 ft. lengths).
The deluxe model is designed to meet the specifications and regulations of the Emergency Medical Transportation Association for its minimal displacement when crossed.
Unique manufacturing of raw materials allows the speed bumps to “Breathe” when exposed to extreme temperature changes. The advantages are rigidity and strength.
FIVE YEAR LIMITED WARRANTY
Deluxe speed bump is available with spikes, lag bolts or truss plates for fixation with adhesive.
Can be used on pavement, concrete, steel and wood.
Speed bumps can be mounted horizon- tally on walls for bumper building and wall protection.
W A
L L
Aesthetically protect hallways, walls, and buildings from im- pacts. Eliminate costly maintenance repairs to both build- ings and vehicles.
STANDARD
Solid Standard Speed Bumps are available in 3 sizes, (4 ft., 6 ft. and 9 ft. lengths). The standard model is designed with a lower profile and angled inclines for sensitive areas such as hotels, malls, condominiums, trailer parks and private passage ways.
Unique manufacturing of raw materials allows the speed bumps to “Breathe” when exposed to extreme temperature changes. The advantages are rigidity and strength.
WALL BUMPERS
Wall bumpers are available in black, blue and white (upon request).
Wall Bumpers are lightweight and easy to install, offering a cost effective, maintenance-free application. Available in 4 ft., 6 ft. and 9 ft. lengths.
FIVE YEAR LIMITED WARRANTY
Deluxe speed bump is available with spikes, lag bolts or truss plates for fixation with adhesive.
Can be used on pavement, concrete, steel and wood.
Speed bumps can be mounted horizon- tally on walls for bumper building and wall protection.
EASY INSTALLATION SOLID COLOR PRODUCT MAINTENANCE FREE LIGHT WEIGHT UV STABILIZED CHEMICAL RESISTANT WEATHER RESISTANT WALL PROTECTION SOLID COLORS GUARANTEED 5 YEARS
BENEFITS
Products include easy to follow Installation instructions INSTALLATION Asphalt: Drill a 1/2 inch hole with a masonry carbide bit and Insert 14” capped rebar spike into predrilled hole and hammer into position.
Concrete: ` Utilize 1/2” diameter lag bolts 5” in length.
Anchors 4 foot requires 3 spikes / lag bolts 6 foot requires 4 spikes / lag bolts 9 foot requires 5 spikes / lag bolts
-NH No Hardware
$ $ $ $ $
$ $ $ $ $
$ $ $ $ $
$
$ $ $ $ $ $ $
22 Lbs Yellow 28 Lbs Yellow 25 Lbs Yellow 41 Lbs Yellow 50 Lbs Yellow 10 oz 12 oz 15 oz
WEIGHT COLOR
Standard Deluxe Standard Deluxe Standard 5 “ x 1/2 “ Lag Bolt 5 “ x 1/2 “ Lag Bolt 12 inch Spike
4' 4' 6' 6' 9' 5” 6” 12 “
DESCRIPTIONSIZE
WWW.USREFLECTOR.COM Page C-5 Prices reflect single units only, please contact your sales representative for quantity pricing
Easy to install, modular rubber speed humps for speeds ranging over 30 m.p.h.
Combination of virgin and recycled rubber speed humps are designed for high impact speed areas. Safety rider speed humps offer greater visibility with its 35.5 inch roll over surface and bright yellow reflective striping. Rubber speed bump’s superior construction resists warping, rotting, chipping and temperature variations. Designed for smooth roll overs.
Safety rider speed humps can cover any road surface with its modular construction with built in tongue-in-groove system. End caps available for a clean smooth roll overs.
EASY ROLLOVER SPEED HUMPS
Features: High impact, high traction. Virgin and recycled rubber Embedded reflective tape Joint modular units with tongue-in-groove system Cover an entire roadway or span a parking lot End caps for protecting end sections from wear and tear.
Modular sections have 6 anchor points for secure positioning. Reflective yellow markings provide exceptional nighttime visibility to help alert drivers of a reduced speed zone.
7 Speed humps and two end caps shown
Benefits: Slows both cars and trucks Highly visible Save labor costs with quick and easy installation Easily relocate, move and store for future use. Customize any linear length you need Emergency vehicle friendly
HIGHLY VISIBLE EASY INSTALLATION
Dimensions: 35.5” x 19.5” x 0 to 2.1” high
Item # Size Weight Description Cost 355-23500 35.5” x 19.5” 44 lbs ea. Speed hump 355-23501 35.5” x 17.5” 19 lbs ea. End cap
315-5-LB 5 in x 1/2” Lag Bolt
$ $
$
TRAFFIC CALMING REDUCES SPEED WHILE MAINTAINING CONTINUOUS TRAFFIC FLOW
Safety rider can be used in school zones, hospitals, shopping malls, apartment complexes, residential neighborhoods, and any area requiring traffic calming.
Safety Rider speed humps are designed and tested to reduce speeds down to 18 mph on.
TRAFFIC CALMING
SPEED CUSHIONS
WWW.USREFLECTOR.COM Page C-6 Prices reflect single units only, please contact your sales representative for quantity pricing
High Impact speed humps for areas where strength and durability are required.
Vulcanized rubber Speed Humps with inner steel reinforcement provide exceptional impact resistance capabilities, allowing them to be installed in areas of continuous traffic flow. High Impact speed humps are manufactured to resist speeds in excess of 55 m.p.h. without destruction of the hump. Speed humps can be assembled to span any large surface by utilizing addi- tional ramp squares and center squares. Humps are equipped with reflecting strips enhancing day / night visibility.
HIGH IMPACT SPEED HUMP
Solid Vulcanized rubber with steel reinforcement. Not more than 45 m.p.h.
Equipped with two (2) reflec- tive strips.
City traffic including parks and neighborhoods.
Metal pavement sleeve kit or Lag Bolts. Unlimited 67 inches. 30 inches, 30 inches, Height 2 inches.
MINI HUMP
LENGTH
23.6” 23.6” 23.6” 23.6” 19.5” 10”
WIDTH HEIGHT COSTITEM #
33.5” 33.5” 23.6” 23.6” 30” 30” 5 3/4” 2” 3.5”
2.4” 2.4” 2.4” 2.4” 1.6” 1.6”
$ $ $ $ $ $ $ $ $
88Lbs 88 Lbs 75 Lbs 75 Lbs 41 Lbs 18 Lbs
WEIGHT COLOR
Ramp Ramp Center Center Mini Hump Mini Hump end piece Metal pavement sleeve Bolt Lag bolt
DESCRIPTION
High impact speed humps have been designed to continuously resist impacts in excess of 30 m.p.h. Since they are manufactured from vulcanized rubber, this assures impact absorption, offering smooth roll overs for all passing motorists.
Designed for permanent and temporary installations utilizing metal pavement sleeves. This allows humps to be removed temporarily and replaced with- out re-drilling.
End pieces are available to complete any length of an installed hump, thereby offering a clean formed ramp.
Solid Vulcanized rubber with steel reinforcement. Withstands 55 m.p.h. impacts continuously. Equipped with 2 reflective strips. City, high volume traffic including avenues, neighbor- hoods, and parks. Metal pavement sleeve kit. Unlimited when using center square. 67 inches.
Characteristics Material:
Minimum width:
CENTER BLOCK
Center squares are designed to increase the length or “roll over” distance of the speed hump.
Designed for both permanent and temporary installations.
Material:
Speed:
Reflective:
Applications:
Installation:
Black Red Black Red Black Black
Mini Humps are designed to resist impacts less than 40 m.p.h. continuously. Manufacturing the hump from vulcanized rubber assures impact absorption, offering smooth roll overs for all passing motorists.
A nti skid surface
2.4"
Designed for permanent and temporary installations utilizing metal pavement sleeves. This allows humps to be removed temporarily and replaced with- out re-drilling.
Mini Humps are made with protruding rubber knobs to enhance their anti-skid feature. Reinforcing with steel guarantees the Mini Hump’s anchored position.
TRAFFIC CALMING
SPEED CUSHIONS
WWW.USREFLECTOR.COM Page C-7 Prices reflect single units only, please contact your sales representative for quantity pricing
TRANSIT HUMPS for superior traffic calming projects. Speed cushion’s unique design allows transit vehicles such as buses and emergency vehicles with wide axles to pass over the hump without disturbing their passengers. Pieced together like a puzzle, the speed cushion can easily cover any large surface by utilizing additional ramps and center squares.
TRANSIT HUMP 1
LENGTH
23.6” 23.6” 23.6” 23.6” 33.5” 33.5”
WIDTH HEIGHT COSTITEM #
2.4” 2.4” 2.4” 2.4” 2.4” 2.4”
$ $ $ $ $ $ $ $
88Lbs 88 Lbs 75 Lbs 75 Lbs 110 Lbs 110 Lbs
WEIGHT COLOR
Ramp Ramp Center Center Rounded corners Rounded corners Metal pavement sleeve Bolt
DESCRIPTION
Speed cushions offer a quick and effective solution when installed in areas where vehicle speed must be reduced.
Transit Humps are manufactured from vulcanized rubber with steel reinforce- ment, features that offer exceptional strength and wear characteristics. Transit Humps are built rugged enough to be installed permanently and versa- tile enough to be removed and replaced as needed.
Black Red Black Red Black Red
L 33.5” x W 33.5” x H 2.4” 110 lbs
RAMP
L 33.5” x W 23.6” x H 2.4” 88 lbs
CENTER BLOCK
L 23.6” x W 23.6” x H 2.4” 75 lbs
Cushions are designed to interconnect with one another allowing multiple assemblies.
Removal and reinstallation can be performed in less than 30 minutes.
TEMPORARY OR PERMANENT INTERCONNECTING REFLECTIVE STRIPS EASY INSTALLATION EXPANDABLE TWO COLORS LARGEST HUMP AVAILABLE CROSSWALKS
0.5"
2.4"
Each hump utilizes 4 anchors, 4 bolts and 4 rubber protective bolt caps for proper installation.
Transit Hump’s low 2.4” profile, combined with its 16.5 degree incline, helps enforce the needed attention to traffic calming to all oncoming motorists.
ROUNDED EDGE
INTER CONNECT
Equipped with 5” x 2.5” Reflective Bands for day and night visibility
BENEFITS
6-15 feet
6-15 feet
PEDESTRIAN WALKWAY
PEDESTRIAN WALKWAY
Placement of cushions before and after a crosswalk greatly reduces speeding by motorists.
ENHANCE CROSSWALK ZONES
Speed cushions are equipped with reflecting strips, thereby enhancing day and nighttime visibility. Humps can be used for raised pedestrian crosswalks.
Manufactured from vulcanized rubber with steel reinforcement
TEMPORARY OR PERMANENT
Installation requires adhesive - Adhesive is available in 5 oz., 8 oz., 11.1 oz., 27.9 oz. and 37 oz tubes
TRAFFIC CALMING
SHARK TOOTH
WWW.USREFLECTOR.COM Page C-8 Prices reflect single units only, please contact your sales representative for quantity pricing
TRANSIT HUMPS for superior traffic calming projects. Aggressive visual “Shark Tooth” reflective triangles help identify a speed cushion’s presence for oncoming vehicles. Their unique design allows transit vehicles, such as buses with wide axles, to pass over the hump without disturbing their passengers. Speed Humps are equipped with reflecting film strips, enhancing day / night visibility.
TRANSIT HUMP 2
LENGTH
29.5” 29.5” 29.5” 29.5” 39.5” 39.5”
WIDTH HEIGHT COSTITEM #
2.4” 2.4” 2.4” 2.4” 2.4” 2.4”
$ $ $ $ $ $ $ $
77Lbs 77 Lbs 77 Lbs 77 Lbs 100 Lbs 100 Lbs
WEIGHT COLOR
Rounded left corner Rounded left corner Rounded right corner Rounded right corner Ramp Ramp Metal pavement sleeve Bolt
DESCRIPTION
BENEFITS
Placement of cushions before and after a crosswalk greatly reduces speeding by motorists.
ENHANCE CROSSWALK ZONES
Pieced together like a puzzle, the Speed Hump can easily cover any large surface by utilizing additional center squares. Humps can also be used for raised pedestrian crosswalks. Manufactured from vulcanized rubber with steel reinforcement
Installation requires adhesive - Adhesive is available in 5 oz., 8 oz., 11.1 oz., 27.9 oz. and 37 oz. tubes
TEMPORARY OR PERMANENT INTERCONNECTING REFLECTIVE STRIPS EASY INSTALLATION EXPANDABLE TWO COLORS ALL WEATHER RESISTANT REINFORCED WITH STEEL
Speed cushions offer a quick and effective traffic calming solution for areas where high speed is frequent.
Transit Humps are manufactured from vulcanized rubber with steel reinforce- ment, features that offer exceptional strength and wear characteristics. Tran- sit Humps are built rugged enough to be installed permanently and versatile enough to be removed and replaced as needed.
Removal and reinstallation can be accomplished in less than 30 minutes.
Each hump utilizes 4 anchors, 4 bolts and 4 rubber protective bolt caps for proper installation.
L 33.5” x W 29.5” x H 2.4” 100 lbs
LEFT EDGE
L 33.5” x W 29.5” x H 2.4” 77 lbs
RIGHT EDGE
L 35.5” x W 29.5” x H 2.4” 77 lbs
SIDE RAMP
Drill pilot Drill hole Clean Adhesive Anchor - open to traffic
Continuous lineContinuous line
Lateral ramps
19.7 " 19.7 "
2.4"
35.5 "
0.6 "
Equipped with 20” x 20” Reflective Triangle Bands for improved driver awareness.
Most common speed cushion layout
K71 Flexible Posts stops vehicle lane changes
K71 Flexible Posts stops vehicle lane changes
TRAFFIC CALMING
WWW.USREFLECTOR.COM Page C-9 Prices reflect single units only, please contact your sales representative for quantity pricing
FLEXIBLE CURBING for traffic calming road narrowing projects. Made with recycled rubber, flexible curb is the next generation in constructing islands, medians, curbs, pedestrian walkways and more.
Flexcurb is made to bend and form to the curbs contour. Rubber curbing offers freedom of design and energy absorbing characteristics.
APPLICATIONS
LENGTH
DESCRIPTION
Flexcurb is designed to solution the construction of curbing. Easily fits and contours to most any curved or straight surface.
Black Red
L 39.7” x W 3.937” x H 3.543” 18 lbs
Flexcurb is designed to connect with one another allowing straight and curved contours.
Each Flexcurb utilizes 4 lags, 4 lag shield and 4 washers for proper installation.
Enhance entrance point and eliminate illegal parking at exit points.
Each Flexcurb is equipped with 3, 6” x 1.5” reflective thermoplastic strips
INSTALLATION
ENHANCE CROSSWALK ZONES
Flexcurb is equipped with reflecting strips, thereby enhancing day and nighttime visibility. 4 bolts required for fixation.
Manufactured from recycled rubber
Flexcurb installs quickly by utilizing lag bolts.
Simply chalk out area, place curb and drill anchor holes. Bolt Flexcurb into position. Once form is complete, fill with concrete, sand, wood or desired surface fill/coating.
TEMPORARY OR PERMANENT INTERCONNECTING REFLECTIVE STRIPS EASY INSTALLATION EXPANDABLE TWO COLORS RED BURGUNDY
AND BLACK MULTIPLE USES: CROSSWALKS, MEDIANS, ROAD NARROWING AND LANE CHANGES ETC...
BENEFITS ENHANCE ENTRANCE POINTS
6 QUICK STEPS
Instant Curbing is ideal for narrowing roads where pedestrian crossing is sensitive.
TRAFFIC CALMING Solid Instant Curbing manufactured from recycled materials has become a cost effective immediate solution to roads with or without existing curbing. Solid Instant curb allows a small crew to build a complete raised median in just a few hours. Medians may be permanent or temporary depend- ing on application such as crosswalks, bottle necks, road enhancement, centerline medians, or vehicle guidance. Each curb is equipped with 1 OPTI-Curb glass markers for maximum nighttime visibility. Curbing may be painted according to location or MUTCD specifications.
APPLICATION
COMPONENTS
HW-L8 8 Inch lag bolt and shield 10””
HW-L10 10 Inch lag bolt and shield
Page C-10
RECYCLED CURBING
www.usreflector.com
CROSSWALKS
Curbing can be used to drive vehicles away from dangerous road shoulders
Channel vehicles through safe diving zones
1. Set up traffic control 2. Mark, layout and anchor curbing 3. Paint curbing 4. Fill with sand, gravel, concrete, or dirt 5. Spread and Landscape material 6. Open to traffic SAFETY LANES
DIVIDE LANES Curbing has 3 preformed *anchor holes for fixation.
*Curb is anchored with 8” or 10” lag shields and bolts.
Anchor holes
Made from recycled material
Anti-Skid Audiable Pedestrian & Vehicles
DESCRIPTION Color-Grip® is US Reflectors new High Performance Grade two part, solvent free polyurethane hybrid resin system for use with several types of selected stone aggregates providing a complete anti-skid surfacing system for pedestians and vehicles. Color-Grip® anti-skid properties extends the benifits of traditional flooring materials by providing a natural or colored stone surface. Visually beautify and enhace environments with a cost effective long term surfacing system
Color-Grip® Anti-Skid surface finishing systems for traffic management can be easily applied to most all surfaces including asphalt, bitumen, concrete, wood, steel and aluminum.
APPLICATIONS: Crosswalks, pedestrian & handicap walk ways, ramps, cycle lanes, footbridges, subway pedestrian crossings, car parks, Traffic Lights, Black Spot Areas, rumble strips, Road Narrowng, pavement Markings and legends
BENEFITS Color-Grip® is an easy to apply unique polyurethane hybrid adhesive that bonds to all surfaces allowing you to choose colored or natuaral stone variations for indoor or outdoor applications. A great alternative to traditional flooring materials.
• Restore and Beautify deteriorating sufaces • Estetically enhance public safety • Adhers to most all surfaces • Mantenence free
Beautify and enhance any surface for vehicles and pedestrians
Color-Grip® Hybrid polyurethane adhesive can be used with a wide range of US Reflector aggregates for appearence and or performance. Alternativly you may use your own stone source just as long as the stone does not exceed 3mm. Please contact US Reflector for more information.
Increase driver awareness Color-Grip® provides a high-friction surface with the added benefit of available colors for special markings in sensitive areas. Color-Grip® Rumble Strips creats a visible, audiable noise warning application alerting drivers of potential hazards.
Color-Grip® provides an aesthetically pleasing, durable surface for foot and light vehicular traffic.
Anti-Skid Color-Grip®, when used as a binder with bauxite, or granite creates a road surfacing system that can reduce wet braking distances by up to 33%.
Aggregate TM
™ COLOR-GRIP®
polyurethane hybrid
Anti-Skid All applications
CHARACTERISTICS
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Part # Description Qty
CG-C Color additive (match stone color) 350 grams
Part # Description Qty
bagsCG-B2 Traffic Grade 1.0-3.0 mm
STONES
Color-Grip® is widley used in prestige housing and business developments especially in conservation areas where harmony with the surrounding environment is important. The wide range of aggregate shapes and colors offers the opertunity to introduce design elements into landscaping and refurbishment projects.
ITEM NUMBERS:
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Color-Grip® Natural and colored stones For use on Government, Corporate, Commercial and Residential applications.
When combining Color-Grip® PHR Resin & Color-Grip® Natural or Colored Aggregates together creates an Anti-Skid gravel Surface Dressing/ Coating. A wide selection of natural colored aggregates provide an attractive low maintenance surface which is suitable for light to heavy traffic use. Color-Grip® provides an aesthetic, long lasting surface, for a vast range of applications from domestic driveways to large corporate and landscaping schemes. The attractive, traditional appearance of the various gravels and chippings makes them highly suitable for high profile heritage sites, where a sympathetic appearance is crucial. Color-Grip® application requires 2 elements, Color-Grip® PHR polyurethane adhe- sive and Color-Grip® Natural or colored stones.
Color-Grip® PHR is supplied in a neutral amber color, which can be tinted with Color-Grip® Pigment Packs to match a wide range of natural or pre-colored and custom coated stone aggregates. See our separate Color-Grip® product data sheet for more details.
Color-Grip® PHR Resin Color-Grip®Natural and colored AGGREGATES Color-Grip® is the name of a range of high performance pigmented resin coated aggregates to be used as the dressing / top coat in conjunction with cold curing res- in systems such as Cold-Grip PHR. Natural or system for use with several types of selected aggregates provid- ing a complete anti-skid surfacing system.
When manufactured using 1-3mm traffic grade calcined bauxite, Color-Grip® will provide a vivid, high- friction surface
A two part, solvent free polyurethane hybrid resin adhesive system with optional color for use with several types of selected aggregates providing a complete anti-skid surfacing system.
Color-Grip® Adhesive & Stone aggregates
Part # Description Gallons Weight
CG-PHR-A1 Cold-Grip® Activator 1.3 11 4.5
CG-PHR-C1 Color additive 0.13 0.77 350g
Coverage 17 to 20 yards per 39 lb container
Part # Description Packaging
CG-B2 Traffic Grade 1.0-3.0 mm
Coverage 11 lbs of aggregete per 1 square yard
STONES
™
• Highly durable • Weather resistant • Fuel and chemical resistant • Lead free
• Skid and slip resistant • Strong, opaque and light-stable colors • Standard or custom colors available • Traffic or pedestrian grade aggregate sizes
BENEFITS
STONE TYPES HARDNESS Buff Calcined Bauxite 9 Grey Calcined Bauxite 9 Red Granite Green Granite 6-7 Grey Granite Silver Grey Granite 6-7
Stone CHART TM
™
Amber Flint Corn Flint Dobbsweir Golden Pea Gravel Monsaldale
Aztec Gravel Pearly Quartz Staffordshire Pink Trent Pea Gravel Brittany Bronze
Grey Granite Barley Corn Niagara Blue Sienna Trentham Gravel
Rustic Granite Guyanan Bauxite (Grey)
Ingleton Green Black BasaltCopper Slag
Salmon Pink Granite
Anti Skid & Traffic Management Aggregates CHART
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Color CHART TM
™
Black Bold Red
Emerald Green Grass Green
Lemon Yellow Strong Blue For more information please contact your sales representative or US Reflector
Toll Free: 800 414-5024 / www.usreflector.com
RUMBLE STRIPS are an innovative traffic safety product designed for traffic calming.
Rumble Strips create audible vibrating warnings for all vehicles approaching reduced speed zones. These day/night visibility warning devices utilize highly reflective reflective durable coatings and provide excellent reflective visibility during wet, nighttime conditions. Can be used for temporary or permanent applications.
Alert drivers through a combination of safety features in just one product.
RUMBLE STRIP MODEL R1
Size: 4” x 6”
Highly reflective, brilliant white or yellow profiled rumble strips designed for use where reflective traffic calming and speed reduction are required.
Unique design affords motorists with both standard and wet night reflectance along with audible and vibratory features to enhance drivers alertness.
Ideal for transverse speed reduction in construction zones, school zones, children play zones, reduced speed zones, railroad crossings, bridge decks, roadway shoulder chann- elization and other applications requiring speed reduction and/or traffic calming.
Non-Reflective Black Non-reflective black matte finish profiled rumble strips designed for use where traffic calming and speed reduction is required. Provides an audible and controlled vibratory warning to motorists, alerting them that a change in driving patterns is required as a result of upcoming traffic hazards. Black matte finish blends into bituminous asphalt surfaces.
RECOMMENDED FOR USE ON ASPHALT OR SMOOTH CONCRETE SURFACES. TEMPORARY OR PERMANENT INSTALLATIONS.
CONTACT CEMENT: One gallon of contact cement covers approximately 50 to 75 sq ft. 10 rumble strips = 20 square feet.
CONSULT APPLICATION INSTRUCTIONS OR YOUR REPRESENTATIVE PRIOR TO USE.
Yellow 4' x 6" 0351-6Y-RRS 1 $ White 4' x 6" 0351-6W-RRS 1 $ Black 4' x 6" 0351-6BK-NRS 1 $
Yellow 4' x 6" 0350-6Y-RRS 10 $ White 4' x 6" 0350-6W-RRS 10 $ Black 4' x 6" 0350-6BK-NRS 10 $
Contact Cement 0355-1CC 1 Gal $ 0355-5CC 5 Gal $
Bituminous Call Each piece 6” x 4”
Single units: COLOR SIZE ITEM # QTY COST
Box of 10 units (40 Linear feet) COLOR SIZE ITEM # QTY COST
ADHESIVE TYPE ITEM # SIZE COST
TRAFFIC CALMING
WWW.USREFLECTOR.COM Page C-2 Prices reflect single units only, please contact your sales representative for quantity pricing
Unique stone surface offers skid resistant, impervious protection and represents an audible warning device that can be adhered to pavement, con- crete, steel, ceramic and wooden surfaces.
Road Carpet resembles existing pavement surfaces with a higher level of anti-skid properties. Unlike pavement, Road Carpet has the ability to stretch, and conform to virtually any surface without cracking or splitting. Available in reflective and non-reflective surfaces .
ROAD CARPET
BRIDGE DECKS - wood and steel Bridge decks can be equipped with individual strips or complete surface coverage utilizing carpet rolls.
Road Carpet has incrusted epoxy coated stones built into a flexible PVC support offering a permanent skid resistant surface.
APPLICATIONS Road Carpet performs its function in a variety of applications including, bridges, rumble strips, metal construction plates, vehicle and pedestrian ramps, pathways and crosswalks. Quick, easy installation characteristics make it an excel- lent protective, anti-skid surface choice for all applications in their respective categories.
WEAR CHARACTERISTICS Road Carpet utilizes Bohixi type stones providing extremely durable and natural anti-skid properties. RC-BX-03 and RC-BX-04 have less than 1% granular loss per one million vehicles.
ROAD CARPET ANTI-SKID Rumble strips for bridges, ramps and turns.
TEMPORARY OR PERMANENT Choosing between 2 adhesives allows Road Carpet’s installation to be temporary or permanent.
Road Carpet bonds perfectly to steel construction plates.
RC-BZ-03-Y RC-BZ-04-Y
COST
Adhesive
RESURFACING Designed originally to patch roads, Road Carpet now defines the meaning of “Out door carpet”. AVAILABLE SIZES Road Carpet is available in 6” strips or 4 feet wide rolls up to 60 feet in length. Carpet can easily be cut to size utilizing a utility knife. ADHESIVE Polyurethane Industrial strength interior and exterior polyurethane adhesive can be applied to most all surfaces including: PVC, rubber, concrete, metal, glass, ceramic, wood, sandstone, asbestos and rigid foam. Bituminous “Hot Melt” adhesive can be used on pavement for temporary or permanent applications.
STRONG AND DURABLE Road Carpet’s exposed surface can protect surfaces or reduce deterioration on surfaces such as steel, concrete, asphalt and wood. Can be used as an immediate solution for covering exposed, deteriorating, cracked, and splintering surfaces quickly and effectively.
TRAFFIC CALMING
RUBBER BUMPS
WWW.USREFLECTOR.COM Page C-3 Prices reflect single units only, please contact your sales representative for quantity pricing
Flexible, easy to install rubber speed bumps for speeds under 30 m.p.h.
100% recycled rubber speed bumps for areas where vehicle speed is problematic. Rubber speed bump’s superior construction resists warping, rotting, chipping and temperature differences. Designed for smooth rollovers.
Diagonal reflective yellow strips with “Cats Eye’s” provide approaching motorists with an awareness of the necessity for speed reduction. Two models available: 4 foot and 6 foot with either glass eyes or top mounted markers for enhanced night visibility.
EASY ROLLOVER SPEED BUMPS
Easy Rider type bumps are equipped with reflective yellow stripes and “Cat’s Eye” glass beads.
Glow Rider type bumps are equipped with top mounted yellow 2 face prismatic reflective markers.
Standard lengths and uniform sizes allow the bumps to be joined at the ends for greater lengths. Both models are available in 4 ft. and 6 ft. lengths.
End caps for speed bumps adapt to both Easy Rider and Glow Rider for smooth round roll overs.
Channeled under- side has two 11/4” x 1” grooved conduits allow- ing for cable/piping pro- tection and drainage.
Glow Rider model with top mounted double faced prismatic markers.
BENEFITS
100% recycled rubber Reflective yellow paint Integrated reflectors Channeled underside 4 foot and 6 foot lengths Warping and rot resistant U.V. and oil resistant Lineal attachment capability Flexible and non conductive Temporary or permanent Optional end caps
HIGHLY VISIBLE
INSTALLATION Asphalt STEP ONE: Drill a 1/2 inch hole with a masonry carbide bit.
STEP TWO: Insert 14” capped rebar spike into predrilled hole and hammer into position.
Concrete Utilize 1/2” diameter lag bolts 5” in length.
Anchors 4 foot requires 3 spikes / lag bolts 6 foot requires 4 spikes / lag bolts
Easy Rider
Glow Rider
Dimensions both models are sized at 2.25 inches in height x 12 inches in width.
Item # Length Description Cost 355-4ER-SYP 4 ft. Easy Rider 355-4GR-PM 4 ft. Glow Rider SB-4BK-3S8GB 4 ft. Tiger Tooth 355-6ER-SYP 6 ft. Easy Rider 355-6GR-PM 6 ft. Glow Rider SB-6BK-3S8GB 6 ft. Tiger Tooth 355-END Extreem element 315-5-LB 5 in. Lag Bolt x 1/2” 357-14-SPK 14 in. Spike
$ $ $ $ $ $ $ $ $
™ SPEED STAR
DESCRIPTION Speed-Star traffic calming devices are a unique approach to traditional speed bumps. No matter what width the road may be, you can pick and choose as many Speed Stars as needed to accommodate your application.
BENEFITS Individual Speed Stars for random installation and personalized configurations. Single point anchoring system. Temporary and permanent applications.
Audible visual noise warning devices for traffic calming
Traffic calming Modular Day & Night visibility
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
DIMENTIONS Width: 8 ¾ inches Height: 1 ¼ Inches Weight: 2 lbs
Speed Stars are a safe, non aggressive visual solution to controlling traffic in municipal and commercial applica- tions. Each Speed Stars come with lag bolt and sleeve,
Highly visible Individual mounted Speed Stars have mass tinted yellow triangles for long term visibility. Unlike coated or painted materials that wear over time. Speed-Stars can be used for short term or long term applications. Simply remove anchor cap and remove lag bolt for winter ap- plications.
Individual placement
Quick instal
Esthetic Audible noise warning
10-12 cm
10-12 cm
Long term applications Speed-Stars can be used for short term or long term applications. Simply remove anchor cap and remove lag bolt for winter applications.
APPLICATION Speed Stars can be installed in single or multiple rows accommodating any length or width of road. Spacing between Speed Stars is 4 to 10 inches on average based on application requirements.
Asphalt or concrete
Long term applications
HW-315-L Lag bolt
HW-315-LS Lag shield
WWW.USREFLECTOR.COM Page C-4 Prices reflect single units only, please contact your sales representative for quantity pricing
All purpose plastic speed bumps for speeds under 30 m.p.h.
Solid plastic speed bumps are economical and can be used as “All purpose” speed bumps. Two models are available, Standard and Deluxe. Both models identify the necessity for speed reduction to oncoming motorists. The standard model has a lower profile for sensitive areas and is available in 9 ft lengths. Bumps are manufactured in solid yellow with 100% post-consumer, post-industrial recycled plastics.
AN ENVIRONMENTALLY CONSCIOUS PRODUCT
DELUXE
Solid Deluxe Speed Bumps are available in 2 sizes (4 ft. and 6 ft. lengths).
The deluxe model is designed to meet the specifications and regulations of the Emergency Medical Transportation Association for its minimal displacement when crossed.
Unique manufacturing of raw materials allows the speed bumps to “Breathe” when exposed to extreme temperature changes. The advantages are rigidity and strength.
FIVE YEAR LIMITED WARRANTY
Deluxe speed bump is available with spikes, lag bolts or truss plates for fixation with adhesive.
Can be used on pavement, concrete, steel and wood.
Speed bumps can be mounted horizon- tally on walls for bumper building and wall protection.
W A
L L
Aesthetically protect hallways, walls, and buildings from im- pacts. Eliminate costly maintenance repairs to both build- ings and vehicles.
STANDARD
Solid Standard Speed Bumps are available in 3 sizes, (4 ft., 6 ft. and 9 ft. lengths). The standard model is designed with a lower profile and angled inclines for sensitive areas such as hotels, malls, condominiums, trailer parks and private passage ways.
Unique manufacturing of raw materials allows the speed bumps to “Breathe” when exposed to extreme temperature changes. The advantages are rigidity and strength.
WALL BUMPERS
Wall bumpers are available in black, blue and white (upon request).
Wall Bumpers are lightweight and easy to install, offering a cost effective, maintenance-free application. Available in 4 ft., 6 ft. and 9 ft. lengths.
FIVE YEAR LIMITED WARRANTY
Deluxe speed bump is available with spikes, lag bolts or truss plates for fixation with adhesive.
Can be used on pavement, concrete, steel and wood.
Speed bumps can be mounted horizon- tally on walls for bumper building and wall protection.
EASY INSTALLATION SOLID COLOR PRODUCT MAINTENANCE FREE LIGHT WEIGHT UV STABILIZED CHEMICAL RESISTANT WEATHER RESISTANT WALL PROTECTION SOLID COLORS GUARANTEED 5 YEARS
BENEFITS
Products include easy to follow Installation instructions INSTALLATION Asphalt: Drill a 1/2 inch hole with a masonry carbide bit and Insert 14” capped rebar spike into predrilled hole and hammer into position.
Concrete: ` Utilize 1/2” diameter lag bolts 5” in length.
Anchors 4 foot requires 3 spikes / lag bolts 6 foot requires 4 spikes / lag bolts 9 foot requires 5 spikes / lag bolts
-NH No Hardware
$ $ $ $ $
$ $ $ $ $
$ $ $ $ $
$
$ $ $ $ $ $ $
22 Lbs Yellow 28 Lbs Yellow 25 Lbs Yellow 41 Lbs Yellow 50 Lbs Yellow 10 oz 12 oz 15 oz
WEIGHT COLOR
Standard Deluxe Standard Deluxe Standard 5 “ x 1/2 “ Lag Bolt 5 “ x 1/2 “ Lag Bolt 12 inch Spike
4' 4' 6' 6' 9' 5” 6” 12 “
DESCRIPTIONSIZE
WWW.USREFLECTOR.COM Page C-5 Prices reflect single units only, please contact your sales representative for quantity pricing
Easy to install, modular rubber speed humps for speeds ranging over 30 m.p.h.
Combination of virgin and recycled rubber speed humps are designed for high impact speed areas. Safety rider speed humps offer greater visibility with its 35.5 inch roll over surface and bright yellow reflective striping. Rubber speed bump’s superior construction resists warping, rotting, chipping and temperature variations. Designed for smooth roll overs.
Safety rider speed humps can cover any road surface with its modular construction with built in tongue-in-groove system. End caps available for a clean smooth roll overs.
EASY ROLLOVER SPEED HUMPS
Features: High impact, high traction. Virgin and recycled rubber Embedded reflective tape Joint modular units with tongue-in-groove system Cover an entire roadway or span a parking lot End caps for protecting end sections from wear and tear.
Modular sections have 6 anchor points for secure positioning. Reflective yellow markings provide exceptional nighttime visibility to help alert drivers of a reduced speed zone.
7 Speed humps and two end caps shown
Benefits: Slows both cars and trucks Highly visible Save labor costs with quick and easy installation Easily relocate, move and store for future use. Customize any linear length you need Emergency vehicle friendly
HIGHLY VISIBLE EASY INSTALLATION
Dimensions: 35.5” x 19.5” x 0 to 2.1” high
Item # Size Weight Description Cost 355-23500 35.5” x 19.5” 44 lbs ea. Speed hump 355-23501 35.5” x 17.5” 19 lbs ea. End cap
315-5-LB 5 in x 1/2” Lag Bolt
$ $
$
TRAFFIC CALMING REDUCES SPEED WHILE MAINTAINING CONTINUOUS TRAFFIC FLOW
Safety rider can be used in school zones, hospitals, shopping malls, apartment complexes, residential neighborhoods, and any area requiring traffic calming.
Safety Rider speed humps are designed and tested to reduce speeds down to 18 mph on.
TRAFFIC CALMING
SPEED CUSHIONS
WWW.USREFLECTOR.COM Page C-6 Prices reflect single units only, please contact your sales representative for quantity pricing
High Impact speed humps for areas where strength and durability are required.
Vulcanized rubber Speed Humps with inner steel reinforcement provide exceptional impact resistance capabilities, allowing them to be installed in areas of continuous traffic flow. High Impact speed humps are manufactured to resist speeds in excess of 55 m.p.h. without destruction of the hump. Speed humps can be assembled to span any large surface by utilizing addi- tional ramp squares and center squares. Humps are equipped with reflecting strips enhancing day / night visibility.
HIGH IMPACT SPEED HUMP
Solid Vulcanized rubber with steel reinforcement. Not more than 45 m.p.h.
Equipped with two (2) reflec- tive strips.
City traffic including parks and neighborhoods.
Metal pavement sleeve kit or Lag Bolts. Unlimited 67 inches. 30 inches, 30 inches, Height 2 inches.
MINI HUMP
LENGTH
23.6” 23.6” 23.6” 23.6” 19.5” 10”
WIDTH HEIGHT COSTITEM #
33.5” 33.5” 23.6” 23.6” 30” 30” 5 3/4” 2” 3.5”
2.4” 2.4” 2.4” 2.4” 1.6” 1.6”
$ $ $ $ $ $ $ $ $
88Lbs 88 Lbs 75 Lbs 75 Lbs 41 Lbs 18 Lbs
WEIGHT COLOR
Ramp Ramp Center Center Mini Hump Mini Hump end piece Metal pavement sleeve Bolt Lag bolt
DESCRIPTION
High impact speed humps have been designed to continuously resist impacts in excess of 30 m.p.h. Since they are manufactured from vulcanized rubber, this assures impact absorption, offering smooth roll overs for all passing motorists.
Designed for permanent and temporary installations utilizing metal pavement sleeves. This allows humps to be removed temporarily and replaced with- out re-drilling.
End pieces are available to complete any length of an installed hump, thereby offering a clean formed ramp.
Solid Vulcanized rubber with steel reinforcement. Withstands 55 m.p.h. impacts continuously. Equipped with 2 reflective strips. City, high volume traffic including avenues, neighbor- hoods, and parks. Metal pavement sleeve kit. Unlimited when using center square. 67 inches.
Characteristics Material:
Minimum width:
CENTER BLOCK
Center squares are designed to increase the length or “roll over” distance of the speed hump.
Designed for both permanent and temporary installations.
Material:
Speed:
Reflective:
Applications:
Installation:
Black Red Black Red Black Black
Mini Humps are designed to resist impacts less than 40 m.p.h. continuously. Manufacturing the hump from vulcanized rubber assures impact absorption, offering smooth roll overs for all passing motorists.
A nti skid surface
2.4"
Designed for permanent and temporary installations utilizing metal pavement sleeves. This allows humps to be removed temporarily and replaced with- out re-drilling.
Mini Humps are made with protruding rubber knobs to enhance their anti-skid feature. Reinforcing with steel guarantees the Mini Hump’s anchored position.
TRAFFIC CALMING
SPEED CUSHIONS
WWW.USREFLECTOR.COM Page C-7 Prices reflect single units only, please contact your sales representative for quantity pricing
TRANSIT HUMPS for superior traffic calming projects. Speed cushion’s unique design allows transit vehicles such as buses and emergency vehicles with wide axles to pass over the hump without disturbing their passengers. Pieced together like a puzzle, the speed cushion can easily cover any large surface by utilizing additional ramps and center squares.
TRANSIT HUMP 1
LENGTH
23.6” 23.6” 23.6” 23.6” 33.5” 33.5”
WIDTH HEIGHT COSTITEM #
2.4” 2.4” 2.4” 2.4” 2.4” 2.4”
$ $ $ $ $ $ $ $
88Lbs 88 Lbs 75 Lbs 75 Lbs 110 Lbs 110 Lbs
WEIGHT COLOR
Ramp Ramp Center Center Rounded corners Rounded corners Metal pavement sleeve Bolt
DESCRIPTION
Speed cushions offer a quick and effective solution when installed in areas where vehicle speed must be reduced.
Transit Humps are manufactured from vulcanized rubber with steel reinforce- ment, features that offer exceptional strength and wear characteristics. Transit Humps are built rugged enough to be installed permanently and versa- tile enough to be removed and replaced as needed.
Black Red Black Red Black Red
L 33.5” x W 33.5” x H 2.4” 110 lbs
RAMP
L 33.5” x W 23.6” x H 2.4” 88 lbs
CENTER BLOCK
L 23.6” x W 23.6” x H 2.4” 75 lbs
Cushions are designed to interconnect with one another allowing multiple assemblies.
Removal and reinstallation can be performed in less than 30 minutes.
TEMPORARY OR PERMANENT INTERCONNECTING REFLECTIVE STRIPS EASY INSTALLATION EXPANDABLE TWO COLORS LARGEST HUMP AVAILABLE CROSSWALKS
0.5"
2.4"
Each hump utilizes 4 anchors, 4 bolts and 4 rubber protective bolt caps for proper installation.
Transit Hump’s low 2.4” profile, combined with its 16.5 degree incline, helps enforce the needed attention to traffic calming to all oncoming motorists.
ROUNDED EDGE
INTER CONNECT
Equipped with 5” x 2.5” Reflective Bands for day and night visibility
BENEFITS
6-15 feet
6-15 feet
PEDESTRIAN WALKWAY
PEDESTRIAN WALKWAY
Placement of cushions before and after a crosswalk greatly reduces speeding by motorists.
ENHANCE CROSSWALK ZONES
Speed cushions are equipped with reflecting strips, thereby enhancing day and nighttime visibility. Humps can be used for raised pedestrian crosswalks.
Manufactured from vulcanized rubber with steel reinforcement
TEMPORARY OR PERMANENT
Installation requires adhesive - Adhesive is available in 5 oz., 8 oz., 11.1 oz., 27.9 oz. and 37 oz tubes
TRAFFIC CALMING
SHARK TOOTH
WWW.USREFLECTOR.COM Page C-8 Prices reflect single units only, please contact your sales representative for quantity pricing
TRANSIT HUMPS for superior traffic calming projects. Aggressive visual “Shark Tooth” reflective triangles help identify a speed cushion’s presence for oncoming vehicles. Their unique design allows transit vehicles, such as buses with wide axles, to pass over the hump without disturbing their passengers. Speed Humps are equipped with reflecting film strips, enhancing day / night visibility.
TRANSIT HUMP 2
LENGTH
29.5” 29.5” 29.5” 29.5” 39.5” 39.5”
WIDTH HEIGHT COSTITEM #
2.4” 2.4” 2.4” 2.4” 2.4” 2.4”
$ $ $ $ $ $ $ $
77Lbs 77 Lbs 77 Lbs 77 Lbs 100 Lbs 100 Lbs
WEIGHT COLOR
Rounded left corner Rounded left corner Rounded right corner Rounded right corner Ramp Ramp Metal pavement sleeve Bolt
DESCRIPTION
BENEFITS
Placement of cushions before and after a crosswalk greatly reduces speeding by motorists.
ENHANCE CROSSWALK ZONES
Pieced together like a puzzle, the Speed Hump can easily cover any large surface by utilizing additional center squares. Humps can also be used for raised pedestrian crosswalks. Manufactured from vulcanized rubber with steel reinforcement
Installation requires adhesive - Adhesive is available in 5 oz., 8 oz., 11.1 oz., 27.9 oz. and 37 oz. tubes
TEMPORARY OR PERMANENT INTERCONNECTING REFLECTIVE STRIPS EASY INSTALLATION EXPANDABLE TWO COLORS ALL WEATHER RESISTANT REINFORCED WITH STEEL
Speed cushions offer a quick and effective traffic calming solution for areas where high speed is frequent.
Transit Humps are manufactured from vulcanized rubber with steel reinforce- ment, features that offer exceptional strength and wear characteristics. Tran- sit Humps are built rugged enough to be installed permanently and versatile enough to be removed and replaced as needed.
Removal and reinstallation can be accomplished in less than 30 minutes.
Each hump utilizes 4 anchors, 4 bolts and 4 rubber protective bolt caps for proper installation.
L 33.5” x W 29.5” x H 2.4” 100 lbs
LEFT EDGE
L 33.5” x W 29.5” x H 2.4” 77 lbs
RIGHT EDGE
L 35.5” x W 29.5” x H 2.4” 77 lbs
SIDE RAMP
Drill pilot Drill hole Clean Adhesive Anchor - open to traffic
Continuous lineContinuous line
Lateral ramps
19.7 " 19.7 "
2.4"
35.5 "
0.6 "
Equipped with 20” x 20” Reflective Triangle Bands for improved driver awareness.
Most common speed cushion layout
K71 Flexible Posts stops vehicle lane changes
K71 Flexible Posts stops vehicle lane changes
TRAFFIC CALMING
WWW.USREFLECTOR.COM Page C-9 Prices reflect single units only, please contact your sales representative for quantity pricing
FLEXIBLE CURBING for traffic calming road narrowing projects. Made with recycled rubber, flexible curb is the next generation in constructing islands, medians, curbs, pedestrian walkways and more.
Flexcurb is made to bend and form to the curbs contour. Rubber curbing offers freedom of design and energy absorbing characteristics.
APPLICATIONS
LENGTH
DESCRIPTION
Flexcurb is designed to solution the construction of curbing. Easily fits and contours to most any curved or straight surface.
Black Red
L 39.7” x W 3.937” x H 3.543” 18 lbs
Flexcurb is designed to connect with one another allowing straight and curved contours.
Each Flexcurb utilizes 4 lags, 4 lag shield and 4 washers for proper installation.
Enhance entrance point and eliminate illegal parking at exit points.
Each Flexcurb is equipped with 3, 6” x 1.5” reflective thermoplastic strips
INSTALLATION
ENHANCE CROSSWALK ZONES
Flexcurb is equipped with reflecting strips, thereby enhancing day and nighttime visibility. 4 bolts required for fixation.
Manufactured from recycled rubber
Flexcurb installs quickly by utilizing lag bolts.
Simply chalk out area, place curb and drill anchor holes. Bolt Flexcurb into position. Once form is complete, fill with concrete, sand, wood or desired surface fill/coating.
TEMPORARY OR PERMANENT INTERCONNECTING REFLECTIVE STRIPS EASY INSTALLATION EXPANDABLE TWO COLORS RED BURGUNDY
AND BLACK MULTIPLE USES: CROSSWALKS, MEDIANS, ROAD NARROWING AND LANE CHANGES ETC...
BENEFITS ENHANCE ENTRANCE POINTS
6 QUICK STEPS
Instant Curbing is ideal for narrowing roads where pedestrian crossing is sensitive.
TRAFFIC CALMING Solid Instant Curbing manufactured from recycled materials has become a cost effective immediate solution to roads with or without existing curbing. Solid Instant curb allows a small crew to build a complete raised median in just a few hours. Medians may be permanent or temporary depend- ing on application such as crosswalks, bottle necks, road enhancement, centerline medians, or vehicle guidance. Each curb is equipped with 1 OPTI-Curb glass markers for maximum nighttime visibility. Curbing may be painted according to location or MUTCD specifications.
APPLICATION
COMPONENTS
HW-L8 8 Inch lag bolt and shield 10””
HW-L10 10 Inch lag bolt and shield
Page C-10
RECYCLED CURBING
www.usreflector.com
CROSSWALKS
Curbing can be used to drive vehicles away from dangerous road shoulders
Channel vehicles through safe diving zones
1. Set up traffic control 2. Mark, layout and anchor curbing 3. Paint curbing 4. Fill with sand, gravel, concrete, or dirt 5. Spread and Landscape material 6. Open to traffic SAFETY LANES
DIVIDE LANES Curbing has 3 preformed *anchor holes for fixation.
*Curb is anchored with 8” or 10” lag shields and bolts.
Anchor holes
Made from recycled material
Anti-Skid Audiable Pedestrian & Vehicles
DESCRIPTION Color-Grip® is US Reflectors new High Performance Grade two part, solvent free polyurethane hybrid resin system for use with several types of selected stone aggregates providing a complete anti-skid surfacing system for pedestians and vehicles. Color-Grip® anti-skid properties extends the benifits of traditional flooring materials by providing a natural or colored stone surface. Visually beautify and enhace environments with a cost effective long term surfacing system
Color-Grip® Anti-Skid surface finishing systems for traffic management can be easily applied to most all surfaces including asphalt, bitumen, concrete, wood, steel and aluminum.
APPLICATIONS: Crosswalks, pedestrian & handicap walk ways, ramps, cycle lanes, footbridges, subway pedestrian crossings, car parks, Traffic Lights, Black Spot Areas, rumble strips, Road Narrowng, pavement Markings and legends
BENEFITS Color-Grip® is an easy to apply unique polyurethane hybrid adhesive that bonds to all surfaces allowing you to choose colored or natuaral stone variations for indoor or outdoor applications. A great alternative to traditional flooring materials.
• Restore and Beautify deteriorating sufaces • Estetically enhance public safety • Adhers to most all surfaces • Mantenence free
Beautify and enhance any surface for vehicles and pedestrians
Color-Grip® Hybrid polyurethane adhesive can be used with a wide range of US Reflector aggregates for appearence and or performance. Alternativly you may use your own stone source just as long as the stone does not exceed 3mm. Please contact US Reflector for more information.
Increase driver awareness Color-Grip® provides a high-friction surface with the added benefit of available colors for special markings in sensitive areas. Color-Grip® Rumble Strips creats a visible, audiable noise warning application alerting drivers of potential hazards.
Color-Grip® provides an aesthetically pleasing, durable surface for foot and light vehicular traffic.
Anti-Skid Color-Grip®, when used as a binder with bauxite, or granite creates a road surfacing system that can reduce wet braking distances by up to 33%.
Aggregate TM
™ COLOR-GRIP®
polyurethane hybrid
Anti-Skid All applications
CHARACTERISTICS
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Part # Description Qty
CG-C Color additive (match stone color) 350 grams
Part # Description Qty
bagsCG-B2 Traffic Grade 1.0-3.0 mm
STONES
Color-Grip® is widley used in prestige housing and business developments especially in conservation areas where harmony with the surrounding environment is important. The wide range of aggregate shapes and colors offers the opertunity to introduce design elements into landscaping and refurbishment projects.
ITEM NUMBERS:
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Color-Grip® Natural and colored stones For use on Government, Corporate, Commercial and Residential applications.
When combining Color-Grip® PHR Resin & Color-Grip® Natural or Colored Aggregates together creates an Anti-Skid gravel Surface Dressing/ Coating. A wide selection of natural colored aggregates provide an attractive low maintenance surface which is suitable for light to heavy traffic use. Color-Grip® provides an aesthetic, long lasting surface, for a vast range of applications from domestic driveways to large corporate and landscaping schemes. The attractive, traditional appearance of the various gravels and chippings makes them highly suitable for high profile heritage sites, where a sympathetic appearance is crucial. Color-Grip® application requires 2 elements, Color-Grip® PHR polyurethane adhe- sive and Color-Grip® Natural or colored stones.
Color-Grip® PHR is supplied in a neutral amber color, which can be tinted with Color-Grip® Pigment Packs to match a wide range of natural or pre-colored and custom coated stone aggregates. See our separate Color-Grip® product data sheet for more details.
Color-Grip® PHR Resin Color-Grip®Natural and colored AGGREGATES Color-Grip® is the name of a range of high performance pigmented resin coated aggregates to be used as the dressing / top coat in conjunction with cold curing res- in systems such as Cold-Grip PHR. Natural or system for use with several types of selected aggregates provid- ing a complete anti-skid surfacing system.
When manufactured using 1-3mm traffic grade calcined bauxite, Color-Grip® will provide a vivid, high- friction surface
A two part, solvent free polyurethane hybrid resin adhesive system with optional color for use with several types of selected aggregates providing a complete anti-skid surfacing system.
Color-Grip® Adhesive & Stone aggregates
Part # Description Gallons Weight
CG-PHR-A1 Cold-Grip® Activator 1.3 11 4.5
CG-PHR-C1 Color additive 0.13 0.77 350g
Coverage 17 to 20 yards per 39 lb container
Part # Description Packaging
CG-B2 Traffic Grade 1.0-3.0 mm
Coverage 11 lbs of aggregete per 1 square yard
STONES
™
• Highly durable • Weather resistant • Fuel and chemical resistant • Lead free
• Skid and slip resistant • Strong, opaque and light-stable colors • Standard or custom colors available • Traffic or pedestrian grade aggregate sizes
BENEFITS
STONE TYPES HARDNESS Buff Calcined Bauxite 9 Grey Calcined Bauxite 9 Red Granite Green Granite 6-7 Grey Granite Silver Grey Granite 6-7
Stone CHART TM
™
Amber Flint Corn Flint Dobbsweir Golden Pea Gravel Monsaldale
Aztec Gravel Pearly Quartz Staffordshire Pink Trent Pea Gravel Brittany Bronze
Grey Granite Barley Corn Niagara Blue Sienna Trentham Gravel
Rustic Granite Guyanan Bauxite (Grey)
Ingleton Green Black BasaltCopper Slag
Salmon Pink Granite
Anti Skid & Traffic Management Aggregates CHART
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Color CHART TM
™
Black Bold Red
Emerald Green Grass Green
Lemon Yellow Strong Blue For more information please contact your sales representative or US Reflector
Toll Free: 800 414-5024 / www.usreflector.com
