TradeZone caliper 132

SUPPLIERS TO INDUSTRY

WWW.TRADEZONE.CO.NZ

Valid from 1st June to 31st July 2013 • VOL 132

(North Island Stores Only) (South Island Stores Only)

ULTIMATE PRIZE PACKTo WIN this impressive XCEL-ARC MIG M.T.S Welder and Accessories simply

purchase any XCEL-ARC items from pages 2, 3 & 4 and go into the

Nationwide draw - Value $2,700.

Also by purchasing any XCEL-ARC products you will go into a draw at your local TradeZone store for the AS3000F AUTOWELD HELMET (32 x AS3000F AUTOWELD HELMETS PRIZES NATIONWIDE)

SEE TRADEZONE STORES FOR MORE DETAILS.

ULTIMATE PRIZE PACKTo WIN this impressive XCEL-ARC MIG M.T.S Welder and Accessories simply

purchase any XCEL-ARC items from pages 2, 3 & 4 and go into the

Nationwide draw - Value $2,700.

WELDING FEATUREPgs 2-9

WELDINGWELDINGWELDINGWELDING

optional tig kit dealXCELARC XA17V SUREGRIP TIG TORCH x 4mXCELGAS ARGON FLOWMETER REGULATORXCELARC TIG SPARES KIT

$280.00 GST Incl.

$24348+GST

XA-TK1

Power Supply 230v - 1Ph Duty Cycle @ 25°c 60% @ 200ACurrent Range MIG 30 - 200ACurrent Range MMA 10- 160ARated Power 7.0 KVADimensions (LxWxH) 900x400x670mm Weight 37kg

200aMp, 230Volt 1 pHaSeliFt aRC dC tigdigital MeteRS, VRd SaFetYSpoolgUn ConneCtion

With Mig torch, arc Set & RegulatorTig Torch is Optional and Extra

XA-MIG200MTS-SP

M.t.S adVantage - WoRkSHop RatedMig200MtS - Mig-StiCk-tig inVeRteR WeldeR

$1,780.00 GST Incl.

$1,54783+GST

200aMp, 230Volt Mig - tig - StiCkdC liFt aRC tig SpoolgUn ReadY digital MeteRS

XA-MIG200C-SP

Mig200C Mig-tig-StiCk WeldeR

Remote Control at the Mig torch. Fast Response digital adjustment of Wire Feed Speed & Voltage during Welding

neW! digital Mig MUlti-pRoCeSS WeldeRS WitH digital ContRol Mig toRCH

Power Supply 415 -3 +/- 15%Wire Feeder Type Gear Driven 4 RollDuty Cycle @ 40°c 40% @ 500AmpsCurrent Range MIG 40A - 500 AmpsCurrent Range MMA 20A - 500 Amps

• Industrial 500 Amp Power Source • 10m Long Interconnecting Cables • Control Settings at the Wire Feeder• 4 Drive Roll Separate Wire Feeder• Digital Meters• Crater Current Setting• 2/4T Trigger Function• Trolley with Accessory Drawer

indUStRial gRUnt-500 aMpS !

WARRANTY

Input power voltage 240V±15%Rated power 7.5KVAInput Current 31.0AMMA current range 10-250AMIG current range 25-250ARated no load voltage 52.0VDuty Cycle @ 25°c 70% @ 250 AmpsOutput voltage range 11.0v - 27.0VSize (mm ) ( L×W×H ) 880x296x616

poWeRFUl - poRtaBle 250aMp - 230VoltMig - liFt aRC dC tig - dC StiCk eleCtRodeVRd SaFetY- SpoolgUn ConneCtion

Xa-250C tHe little Big Mig

$1,899.00 GST Incl.

$1,651 30+GST

With Mig torch, arc Set & RegulatorTIG TORCH IS OPTIONAL & EXTRA

XA-MIG250C-SP

geniUS! digital ReMote

Power Supply 230v - 1Ph Duty Cycle @ 25°c 60% @ 210ACurrent Range MIG 30 - 210ACurrent Range MMA 10- 160ARated Power 7.0 KVADimensions (LxWxH) 480x230x360mm Weight 19kgXA-MIG210DSP

$2,250.00 GST Incl.

$1,95652+GST

Xa-Mig210d - digital Control210 aMp - 230V - 5kg Spool Mig, dC lift arc tig, StickSpool gun Ready, VRd Safety

$4,975.00 GST Incl.

$4,32609+GST

Power Supply 230v - 1Ph Duty Cycle @ 25°c 60% @ 200ACurrent Range MIG 30 - 200ACurrent Range MMA 10- 160ARated Power 7.0 KVADimensions (LxWxH) 480x230x360mm Weight 18kg

C/w Mig torch, arc Set & Regulator

TIG TORCH IS OPTIONAL & EXTRA

WeldeRS t - SHiRt

$1,495.00 GST Incl.

$1,30000+GST

Power Supply 230v - 1Ph Duty Cycle @ 25°c 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range MMA 10- 200ARated Power 10.8 KVADimensions (LxWxH) 880x296x616mm Weight 35kgXA-MIG250D-SP

$1,900.00 GST Incl.

$1,65217+GST

Xa-Mig250d - digital Control 250 aMp - 230V - 15kg Spool Mig, dC lift arc tig, StickSpool gun Ready, VRd Safety

Tig Torch is Optional and Extra

Xa Mig250d C/w Xa24x4m digital Control Mig torch, earth lead, arc lead & Regulator

Xa Mig210d C/w Xa24x3m digital Control Mig torch, earth lead, arc lead & Regulator

XA-MIG500SWF-SP

Xa-Mig500 aMp WeldeR M.t.S Mig-tig-StiCk inVeRteR

SUpeR neW Model !

TIG TORCH IS OPTIONAL & EXTRAC/w Mig torch, arc Set & Regulator

2

WELDINGWELDINGWELDINGWELDING

poWeRFUl 200aMp - 230V

WARRANTY

industrial 200amp 230v dC inverter WelderStick electrode (MMa) - lift arc dC tig

• On/Off VRD Select • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 50% Duty Cycle • 10 -200 Amps • Weighs 8.2 Kg • Generator Compatible

Compliant to AS/NZ 60947 Standard

C/w - Arc Set x 4m Tig Torch is optional and extra

Xa-aRC200 MMa/tig dC inVeRteR

$770.00 GST Incl.

$66957+GST

XA-ARC200-SP

$399.00 GST Incl.

$34696+GST

technical dataViewing Field 100mm x 67mmReaction Time 0.04m/secShade: Variable 8 14Sensitivity AdjustableDelay Control Yes Auto On/Off YesPower Supply 2 x 3v (CR2032)Sensors 4Total Weight 530g Standards ANSI Z87.1 Optical Class EN379 .1/1/1/2

large 100mm x 67mm View area Advanced High Definition Optics plasma Cutting & grind Mode

aRC CoMMandeR 6000V digital ContRol

• 170 Amp 230V, • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 60% Duty Cycle • 10 -170 Amps • Weighs 5.2 Kg • Generator Compatible

MMa/tig dC inVeRteR WeldeRpeRFoRManCe pRoVen!ReliaBiltY ConFiRMed!Compliant to AS/NZ 60947 Standard $592.00 GST Incl.

$51478+GST

C/w - Arc Set 4m, Carry CaseTig Torch is optional and extra

XA-ARC170-SP

Xa-aRC170 SHaRpeSt deal eVeR!

• 130 Amp 230V, • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 60% Duty Cycle • 10 -130 Amps • Weighs 5.2 Kg • Generator Compatible

MMa/tig dC inVeRteR WeldeR10 aMp plUg appRoVedLegal & Certified for 10 Amp domestic power Supply Use Compliant to AS/NZ 60947 Standard

WARRANTY

$459.00 GST Incl.

$39913+GSTC/w - Arc Set 4m, Carry Case

Tig Torch is optional and extra

XA-ARC130-SP

Xa-aRC130neW Model ReleaSe!

Power Supply 415v - 3Ph Duty Cycle @ 25°c 70% @ 350ACurrent Range MIG 30 - 350ACurrent Range MMA 10- 350ARated Power 15 KVADimensions (LxWxH) 900x400x670mm Weight 51kg

350aMp, 415Volt 3 pHaSeliFt aRC dC tig - StiCk (MMa)digital MeteRS, VRd SaFetYSpoolgUn ConneCtion

C/w Mig torch, arc Set & RegulatorTig Torch is Optional and ExtraXA-MIG350MTS-SP

Xa Mig350MtS

$3,150.00 GST Incl.

$2,73913+GST

WARRANTY

Mig - pUlSe Mig - tWin pUlSe Mig - dC tig - dC pUlSe tigpUlSe Mig WeldeR - MUltiFUnCtion - 230V

• 250 Amp 230V • Simple Operation • Synergic Double Pulse • High Speed Mig/Mag• DC Tig Synergic & Manual• MMA Synergic & Manual • Push Pull Gun Ready• Trolley with Drawer• 20-250 Amps • Weight 60Kg

tig FiniSH WeldS WitH Mig

With Mig torch, arc Set & RegulatorTig Torch is Optional and Extra

$5,999.00 GST Incl.

$5,21652+GST

V0066AA

neW! aRC513 aUto daRkening goggleS arc Welding • Mig Weldingtig Welding • plasma Cuttinggas Welding Ideal for confined space work, inspection, education, military, remote and mobile welding

Technical DataReaction Time 0.05msSensors 2 x IndependentShade: 5-7-9-11-13Sensitivity AdjustableDelay Control AdjustablePower Supply Battery, Solar CellsOperating Temp -10°C to 55°CStandards ANSI Z87.1 / DINWarranty 12 months

WLSIL

NEW!

$385.00 GST Incl.

$33478+GST

Also available are optional wrap around face masks, and fire retardant skull rags and other accessories available on request

ARC513 Welding Goggles Kit includes: ARC513 Goggles, Fire Retardant Balaclava, Spare Cover Lens, Frame for Prescription Glasses, Sturdy Protective Case with Belt Clip.

ACBLK

High Quality 2 Independent Sensors Solar Cell PoweredAdjustable Shade 9-13Adjustable SensitivityAdjustable Delay to Clear

aUtoWeld aS3000F HelMetBeSt peRFoRManCe and ReliaBilitY

HigH QUalitY - loW CoSt - anSi Z87.1 appRoVedWARRANTY

KNOCK OUT

VALUE!

AS3000F$138.00 GST Incl.

$12000+GST

WeldeRS t - SHiRt

WeldeRS t - SHiRt

130

Esseti 132.indd 2 26/04/13 1:59 PM

3

WELDINGWELDING WELDINGWELDING

4 SensorsShade 9-13Delay to Dark TimerSensitivity AdjustmentSolar Powered Battery Grind Warning Flash

aUtoWeld aS4000W HelMetBig 100mm x 60mm ViSion aRea

HigH QUalitY - tig opeRaBle - anSi Z87.1 appRoVed

BIG VIEW

SMALL COST

AS4000W

gRind Mode FUnCtion

$299.00 GST Incl.

$26000+GST

gas Cutting Machine C/w 1.8m track

New Zealand LimitedCg30 tRaCkeR

The *TRACKER CG30* is a stepless variable speed carriage with oxy/fuel gas cutting torch mounted on a straight line track. Built to industrial standards the *TRACKER CG30* provides high quality oxy/fuel cuts on steel plates and structures where straight line accuracy is paramount.

$1,375.00 GST Incl.

$1,195 65+GST

XG-CG30

gaSleSS Mig WiRe

$110.00 GST Incl.

$95 65

XAE71TGS08450.8mm x 4.54kg Spool

XAE71TGS09450.9mm x 4.54kg Spool

$103.00 GST Incl.

$8957

FlUX CoRed gaSleSS WiRe gReat FoR oUtdooR USe

SMootH StaBle aRC XAE71TGS1245

1.2mm x 4.54kg Spool

$99.00 GST Incl.

$86 09

Precision Level Layer Wound • Triple De-oxidised • X-Ray Quality Smooth Feeding • Clean Weld Finish • International Approvals

Manufactured & Compliant to AS/NZ4267 Standard

1 x Heavy Duty Tool Box 1 x 10 Metre Twin Line Hose Set1 x Oxygen Regulator 1 x Welding / Cutting Goggles1 x Acetylene or LPG Regulator1 x Blow Pipe Handle 1 x Oxygen Flash Back Arrestor1 x Cutting Attachment 1 x Fuel Gas Flash Back Arrestor1 x Mixer & 3 x Weld / Braze Tips 1 x Combination Spanner1 x Heating Tip Acetylene Only 1 x Radius Bar and Pivot3 x Cutting Nozzles 1 x Roller Guide & Tip Cleaner Set

indUStRial CUtting Welding & BRaZing SetSoXYgen aCetYlene and lpg gaS SetS

AMAZING PRICE

XG-GSK-A1 (ACETYLENE) - XG-GSK-LPG-1 (LPG)

inClUdeS RegUlatoR FlaSH BaCk aRReStoRS

$560.00 GST Incl.

$48696 EA+GST

XCel-aRC SURegRip eRgo Mig toRCHeS

Model Size +GST Inclusive

XA15-4 XA Suregrip Mig Torch 150A x 4m $135.04 $155.30




High Quality Superior Comfort Mig Welding TorchesFront End Parts Compatible with BINZEL Style Torches

eleCtRode oVenS

$160.00 GST Incl.

$139 13

$228.00 GST Incl.

$198 26

DH10DH5

DH10 Electrode Oven 10 Kg -1000W- 230v

50°C -300°C 600x245x320mm

DH5 Electrode Oven 5 Kg -1000W- 230v 50°C -300°C Portable

pReCiSion leVel laYeR WoUnd e-70S-6 -tRiple de-oXidiSedNo.8 Solid Mig Welding WiRe

CODE PRODUCT DESCRIPTION +GST Inclusive

XA530805 5356 x 0.8mm Al Mig Wire x 0.45kg $13.04 $15.00





• High Quality • Triple Shaved • X-Ray quality• Precision Layer Wound • Smooth Feeding• Low Fume Factor • Clean Welds • Approvals• AWS, ABS, CWB, Lloyds, DNV, TUV, DB

alUMiniUM Mig WiRetRiple diaMond SHaVed pReCiSion laYeR WoUnd

$30.00 GST Incl.

$26 09

XAN80505 0.8mm x 5.0kg XAN80905 0.9mm x 5.0kg

$52.00 GST Incl.

$45 22


$50.00 GST Incl.

$43 48


WARRANTY

StainleSS Steel tig WiRe 316lSiID HARD STAMPED BOTH ENDS - FULL INTERNATIONAL APPROVALS

$138.00 GST Incl.

$12000

XA316LSI-16T XA 1.6mm 316LSi Tig Wire 5KG

$21.00 GST Incl.

$18 26$10.90 GST Incl.

$948$15.50 GST Incl.

$13 48

eleCtRode HoldeR 400 aMp

eaRtH ClaMp 300 aMp

eaRtH ClaMp 500 aMp

EHUK400 EC300T EC500T

RegUlatoR SetValUed at

$240.00

eURo ConneCtion

$40.00 GST Incl.

$3478

XAN80605 0.6mm x 5.0kg

No.8WIRE

No.8WIRE

4

WELDINGWELDING

For cutting aluminium & ferrous metals.

For general purpose work

5

Angle grinder 230mmG23MR

2400w motor. Cybernetic body features super-tough alloy outer casing with a double insulating polycarbonate layer on the inside. This provides

excellent heat dissipation, anti-vibration 3 position side handle reduces strain on the operator.

Angle grinder 125mmG13SN840w. Large spindle lock for more convenience and easier change of accessories. Burst-proof guard for higher user protection with tool-less adjustment. Soft grip and ergonomic shape for fatigue-free grinding applications. Less maintenance. Comes with carry case.

lithium ion impAct drill & Angle grinder comboF005XR0144Comprises of 18V Impact Drill, 2 speed, 13mm chuck, 2 x 3.0Ah Li-Ion batteries, 30 min charger, 85Nm of torque and a Cordless Angle Grinder Bare Tool only. Super Savings.


SF9100 100 x 1.2 x 16mm $1.30 $1.50

SF9115 115 x 1.2 x 22mm $1.65 $1.90

SF9125 125 x 1.2 x 22mm $1.83 $2.10

SF9180 180 x 2.0 x 22mm $2.96 $3.40

SF9230 230 x 2.0 x 22mm $4.26 $4.90


66252841607 100 x 2.5 x 16mm $1.83 $2.10

66252841608 115 x 2.5 x 22mm $2.09 $2.40

66252841610 125 x 2.5 x 22mm $2.43 $2.80

66252841613 180 x 2.5 x 22mm $3.39 $3.90

66252841614 230 x 2.5 x 22mm $3.74 $4.30

cutting off Wheels iron free For cutting stainless steel & ferrous metals.

Aluminium cutting off Wheels66252829984 115 x 1.6 x 22mm

66252829985 125 x 1.6 x 22mm

Angle grinders 0601790042 115mm. 900w.

0601792042125mm. 1100w.

Angle grinder 125mm 1500W0601795042KickBack stop. Antivibration auxiliary handle. Restart Protection. New motor with 100 watts more power than predecessor. Constant Electronics for constant power under load. Large spindle lock for more convenience and easier change of accessories. Burst-proof guard for higher user protection with tool-less adjustment.


66252841585 102 x 1.0 x 16mm $1.83 $2.10

66252919966 115 x 1.0 x 22mm $1.91 $2.20

66252919991 127 x 1.0 x 22mm $2.00 $2.30

ultrA thin metAl c/o WheelsIron, sulphur & chlorine free. Suitable for all structural & food grade stainless steel work.

grinding Wheels iron freeModel Size +GST Inclusive

66252841739 100 x 6.0 x 16mm $1.91 $2.20

66252841742 115 x 6.0 x 22mm $2.43 $2.80

66252841744 125 x 6.8 x 22mm $2.78 $3.20

66252841748 180 x 6.8 x 22mm $4.17 $4.80

66252841751 230 x 6.8 x 22mm $5.91 $6.80

$129.00 GST Incl.

$112 17$415.00 GST Incl.

$36087

$280.00 GST Incl.

$243 48

$189.00 GST Incl.

$164 35

$445.00 GST Incl.

$386 96

$868.00 GST Incl.

$754 78

$3.30 GST Incl.

$2 87

$3.40 GST Incl.

$2 96

HOTPRICE

inox cut off Wheels Thin metal cutting wheels.

115MMANGLE GRINDER

(Bare Tool Only)

Burst proof guards & tool-less adjustment. Large spindle lock.

HOTPRICE

NEWMODELS

INCREASED WATTAGE

3 YEAR WARRANTY

3 YEAR WARRANTY

WELDINGWELDING

6

Angle grinder 125mmW1080-1251100w. Slim motor housing. Auto stop carbon brushes. Easy carbon brush change.

cordless Angle grinderBGA452Z115mm 18v. Electronic current limiter protects the motor from overload. Warning lamp illuminates with pending overload or when battery is low. Anti-restart function – Motor will not start if charged battery is inserted if switch is on.

Angle grinder 115mm9557NB 840w, 1100rpm. Labyrinth construction keeps out dust & debris to protect the motor.

bench grinder 200mmBG201300w. Shaft mounted on ball bearings for smooth running.

Angle grinder 230mmW24-2302400w, marathon motor and two winding protection grids to protect the armature from flying debris. Tool-less adjustment and removal of wheel guard. VibraTech handle to reduce vibrations.Huge output torque@ 17Nm.

flAp discsIndustrial quality for light to medium stock removal.


66623323939 115 x 22 x 40grit $3.39 $3.90

66623323940 115 x 22 x 60grit $4.26 $4.90

66623323941 115 x 22 x 80grit $5.13 $5.90

66623323942 115 x 22 x 120grit $6.00 $6.90

Angle grinder 125mm9565HPowerful 1100w motor designed to provide high heat resistance. SJS mechanism delivers outstanding performance and durability. Dust proof bearings together with zigzag varnish and resin coatings on motor improve durability.

metAl cutting sAW2414NB2400w. Quick vice for fast clamping. 3 way adjustment.

cut off sAW 355mmACS3552200w, round pipe cap. 100mm, square 100 x 100mm, rectangle 130 x 105mm. Fast bypass metal clamp.

Angle grinder 125mmW11-125Q

1150w. Tool-less adjustment and removal of wheel guard for quick and convenient changes between cutting

and grinding functions. Marathon motor enables machine to operate at higher temperatures and significantly

increases tool life. S-automatic safety clutch protects machine and operator from

damage or injury when disc jams.Quick disc change without tools.

$409.00 GST Incl.

$355 65

$215.00 GST Incl.

$186 96

$475.00 GST Incl.

$413 04

$239.00 GST Incl.

$207 83

$129.00 GST Incl.

$112 17

$142.00 GST Incl.

$123 48

$459.00 GST Incl.

$399 13

$281.00 GST Incl.

$244 35

$299.00 GST Incl.

$260 00

bench grinder 200mmBG203550w, coolant tray, in-built auto on light, magnifying lense, drill sharpening guide,

$199.00 GST Incl.

$173 04

125MMANGLE

GRINDER

TOOLONLY

GREATVALUE

WELDINGWELDING

7

AutomAtic Welding helmetWH8000NZFor arc, tig & mig welding. Includes 3 replacement cover lenses.

VentilAtion fAnTQ1025300mm dia. 520w. air delivery 60/70 cu mt per minute.Ideal for welding.

hAnd scrAtch brushesNarrow faces designed to get into tight areas.


BRUW-1000F Coated Steel $6.87 $7.90

BRUW-1000V Brass $14.70 $16.90

BRUW-1000Z Stainless Steel $14.70 $16.90

unbreAkAble VicesMade from unbreakable SG Iron.


VICB-SG04 100mm $60.00 $69.00

VICB-SG05 125mm $94.78 $109.00

VICB-SG06 150mm $129.57 $149.00

Welding cArtTQ6030Sturdy steel construction. Top tray size 500 x 320mm. Bottom tray size 660 x 320mm

heAVy duty c clAmpsStrong and solidly built clamps with a coating on the thread to prevent welding spatter clinging on.


CC41006 150mm $42.00 $48.30

CC41008 200mm $63.39 $72.90

CC41010 250mm $108.70 $125.00

sQuAre Adjust-o mAgnetsModel Size +GST Inclusive

MAGS-MSA46HD 111 x 95 x 29mm 40kg $53.91 $62.00

MAGS-MSA48HD 152 x 130 x 35mm 75kg $99.13 $114.00

$139.00 GST Incl.

$120 87

corner mAgnetMAGC-MST32783 x 95 x 16mm. 14kg pull force.

$149.00 GST Incl.

$129 57

Welding tAbleTABW-TS3020760 x 510mm. Corner guides for easy set up.

$199.00 GST Incl.

$173 04

$499.00 GST Incl.

$433 91

Welding Vice 125mmWVF125Fits all shapes and sizes of steel for right angle welding. Copper thread for conductivity.

$113.00 GST Incl.

$98 26

WELDING HELMET

275MMC-CLAMP

GREATVALUE

GREATVALUE

EASYUSE

$47.00 GST Incl.

$40 87

WELDINGWELDING

8

pipe plier- c clAmpCLAM-PG114VM

Throat Depth: 89mm. Diameter: Min 40mm.Diameter: Max 64mm.

Thread: M10.

Vise grip set 3pcT323SContains 150mm long nose. 175 & 250mm standard vise grips.

c- clAmp locking pliersIdeal for holding metal parts being welded.

Vise grips

locking Welding clAmp 225mmT9RHolds work in proper alignment. Throat depth 41mm

I rear-ended a car this morning...the start of a REALLY bad day!The driver got out of the other car, and he was a DWARF!!He looked up at me and said ‘I am NOT Happy!’So I said, ‘Well, which one ARE you then?’That’s how the fight started.

$55.00 GST Incl.

$47 83

$36.80 GST Incl.

$32 00

$57.50 GST Incl.

$50 00$54.00 GST Incl.

$46 96

$55.20 GST Incl.

$48 00

Anti spAtter 3.78ltrSG13454Reduce costly, time-consuming spatter removal. Just spray Simple Green Anti-Spatter on areas to be protected from spatter: Nozzles, diffusers & tips, and surfaces adjacent to weld. After welding, rinse with water and dry prior to plating or painting.

$49.00 GST Incl.

$42 61

$43.90 GST Incl.

$38 17$27.00 GST Incl.

$23 48

bi-metAl hAcksAW blAdes 300mm255858 18tpi

255866 24tpi

255874 32tpi

$1.80 GST Incl.

$1 57 EA

KT6615-06 150mm KT6615-11 275mm

locking sheet metAl tool 200mmT8R Holds work in proper alignment. Throat depth 41mm.

$45.20 GST Incl.

$39 30

GREATVALUE

GREATVALUE

T11R Welding C Clamp 275mm

T11SP Welding C Clamp with swivel pads 275mm

record mechAnics VicesBody and jaw cast from close-grained grey iron which is CNC machined on all friction surfaces for smooth reliable action.


T3 100mm $112.17 $129.00

T5 125mm $198.26 $228.00

T6 150mm $234.78 $270.00

WELDINGWELDING

9

Zinc itA quick-drying zinc-rich coating that offers similar advantages to hot-dip galvanizing. 95% highest purity zinc in the dried film. NZFSA Approved C23.

bright ZincA quick drying zinc-rich coating for metal protection where a bright galvanized finish is required. More than 50% highest purity zinc in the dried film. NZFSA Approved C23.

2087 400ml 2187 1 Litre

Welding curtAin red 1.8 x 1.8mWC-6636-25Maintains good visibility in and out of welding booths while minimising the arc glare.

stur-d-screenWS-R1066-25Free standing. Easy to assemble. Strong square tubing with sturdy platform legs. Interchangeable parts. No curtain gaping. 1800mm x 1800mm.

Welding gogglesGW-250Lift up welding lens.51 x 108mm.

sAfety specs Weld shAde 5SM-7000W5Adjustable side arms & ratchet temple for closer & better fit.

tig Welding gloVeW-TIGFull pigskin palm. Split pigskin cuff. 300mm long.

Welding helmet633-PA

Polypropylene welding helmet, standard lens of excellent

quality. 51 x 108mm lift-up lens holder.

broWspec broWguArdSG-31CBAF

Elvex Cobalt blue lenses are designed for observing hot, molten metals in blast furnaces,

refining stations, casters, and runways. The deep Cobalt Blue color, and thick polycarbonate lens, is ideal for blocking out red glare, and

reducing heat transmission. It allows the operatorto see the fine detailed shape of the flame, improving the quality and productivity

of their job function.

Welders first Aid kitFAK209116Unitized boxes for easy identification and refill.

$259.00 GST Incl.

$225 22

$59.00 GST Incl.

$51 30$16.70 GST Incl.

$14 52$67.00 GST Incl.

$58 26$18.90 GST Incl.

$16 43

$18.90 GST Incl.

$16 43$10.50 GST Incl.

$9 13

$7.50 GST Incl.

$6 52

$16.70 GST Incl.

$14 52

$69.00 GST Incl.

$60 00$17.90 GST Incl.

$15 57

GREATVALUE

300mmLONG

$81.00 GST Incl.

$70 43

2085 350gm 2185 1 Litre

POWER TOOLSPOWER TOOLS

CHEMICALSCHEMICALS

10

18V pro series high torQue tWin pAckKC18DSDLIncludes Pro Series Driver Drill, Pro Series Impact Driver & 2 x 4.0Ah Li-ion Batteries. Ultra high capacity for unrivalled run time.

cordless driVer drill 18VDS18DSLComes with 2 x 3.0Ah Li-ion batteries. 13mm steel case chuck and fan coiled smart charger.

electric drillDP4000K13mm geared chuck, 750w.Variable-reversible 0-900rpm

cordless drill driVer 18VBDF458RFEExtremely compact tool size. Battery charge indicator. Enhanced dust and drip-proof performance. Higher power and productivity. Ergonomic design for fatigue free use. 21 Torque settings in clutch mode. 2 x 3.0Ah Li-ion batteries.

brAkleen fAst dry 600ml5083A unique blend of fast-drying non-chlorinated solvents. Cleans fast and dries fast minimising down-time. NZFSA Approved C12.

high torQue drillD13VGDesigned for auger bit work and steel drilling. Triple reduction gearbox. 800 watt motor. Capacity 38mm auger bit and 114mm holesaw.

impAct drillGSB21-2REForward & reverse, no-load speed 0 - 900 / 3,000 rpm, impact rate 0 - 15,300 / 0 - 51,000 bpm, torque 40Nm (max.), 13mm keyed chuck, drilling diameter in concrete 21mm (max.), drilling diameter in steel 16mm (max.), drilling diameter in wood 40mm (max.), mechanical, overload clutch, supplied in plastic carry case.

brAkleen blAster 600ml5087Combines the genuine Brakleen formula with a high pressure spray. Blasts away heavy contaminant build-up and for hard to reach areas. NZFSA approved C12.

brAkleen 600ml5089Removes contaminants from industrial machinery, brake linings, pads, drums and callipers. Non-staining, non-corrosive and leaves no residue. NZFSA Approved C12.

$499.00 GST Incl.

$433 91$803.00 GST Incl.

$698 26

$380.00 GST Incl.

$330 43

$389.00 GST Incl.

$338 26

$775.00 GST Incl.

$673 91$499.00 GST Incl.

$433 91 DRILL BITSET

HOTPRICE

each 6 cans under these part numbers (5083, 5087,5089) have 6 Whittaker peanut slabs. Only while stocks last.

3 YEAR WARRANTY

3 YEAR WARRANTY

3 YEAR WARRANTY

$9.50 GST Incl.

$8 26$10.00 GST Incl.

$8 70$10.00 GST Incl.

$8 70

CHEMICALSCHEMICALS

11

multilube gel 500ml5014A unique synthetic penetrating gel. Odourless & clear. Does not attract dust & does not drip off. Fresh & salt water proof. High pressure & heat resistance. Ideally suited for highly loaded reciprocal moving parts and for general use in heavy industries, workshops, automotive and around the home workshop. Evaporates very quickly, 5 to 10 seconds before it sets as a gel. Wide temperature range from -35°C to +300°C. NZFSA approved C15.

simple green concentrAteSG13004Non-toxic, biodegradable, non-abrasive.

rtd liQuidMedium viscosity high performance metal cutting lubricant may be used as a die lubricant in addition to reaming, tapping and drilling.

Y550172 500ml Y550182 5 Litre

Wd40 lubricAntTZCAL132Lubricate, penetrate & protect.

Air riVeter kitW5741-KPulls 3/32”, 1/8”, 5/32” and 3/16” rivets.

retrActAble Air hose reels 10mm 3/8” dia, working pressure 21bar/300psi.

DB320-2-50-P300 15m

DB330-2-65-P300 20m

rtd compoundMetal cutting lubricant in paste form for all machining operations. May be diluted with mineral oil to provide flow. Prolongs tool and die life.

Y551211 500g Y551221 2.5kg

grAVity sprAy gunW70140.6 litre plastic non-drip cup. Spray Nozzle 1.4mm with throttle strainer.

Air compressorSpitfire125011.5cfm, FAD 240lpm.40 litre tank.

$15.60 GST Incl.

$13 57

$36.60 GST Incl.

$31 83

$36.00 GST Incl.

$31 30

$139.00 GST Incl.

$120 87

$139.00 GST Incl.

$120 87

$199.00 GST Incl.

$173 04

$225.00 GST Incl.

$195 65

$229.00 GST Incl.

$199 13

$899.00 GST Incl.

$781 74

$299.00 GST Incl.

$260 00

$249.00 GST Incl.

$216 52

$155.00 GST Incl.

$134 78

STEEL SWIVEL BRACKET

VAPER SPOTSPRAYER WORTH

$99.99

HOTPRICE

AIR TOOLSAIR TOOLS

rtd sprAy 300gmY552132Designed for drilling, tapping and reaming. Easily applied to difficult areas.

sprAy gunW7002SIdeal for both lacquers and enamels. 1.8mm fluid nozzle. Suitable for production work.

$109.00 GST Incl.

$94 78

3.78 LITRESIMPLE GREEN

$21.40 GST Incl.

$18 61

HOTPRICE

Air hose reelDB330-3-50-P30015m 1/2” ID rubber.

$329.00 GST Incl.

$286 09

12

multi tool 250W0601230042C/w 6 blades, 1 sanding plate and 40 sanding sheets.

high temp metAl repAir69 18003 Weld holes and cracks in iron and steel. Withstands 1300 Degrees Celcius and direct flames. Ideal for repairing furnaces, exhausts and manifolds, BBQ etc.

steel reinforced epoxy pAsteMake permanent repairs on almost anything. Withstands up to 260OC, sets underwater, impervious to chemicals, hardens in minutes.

booster 12/24VBB12224-760AUZTo start diesel engines up to 500hp as start assistance and 250hp without battery at 24V.

smArt greAse gun pistol/leVerKK8081Two‐way Operation. Working pressure 4500psi. Burst pressure 10000psi. Working pressure 6000psi.Capacity: 450cc, 16oz Cartridge or Bulk: 500cc.

electronic VernierM7703 scale metric, imperial, fractional. 150mm/6”.

epoxy repAir & kitsMake permanent repairs on almost anything. Sets in 5 mins, steel hard in 15 mins. Can be drilled, tapped, filed, machined, sanded and painted. Cures underwater. Drinking water safe.


69 16002 Epoxy putty 56.8g blister $8.61 $9.90

69 16302 Copper repair putty 56.8g $8.61 $9.90

69 16402 Aluminum repair putty 56.8g $8.61 $9.90

69 16502 Plastic repair putty 56.8g $8.61 $9.90

69 6022K Metal Tank Repair Kit $17.30 $19.90

69 6522K Plastic Tank Repair Kit $18.17 $20.90

smArt screWdriVer set 13pcSCR-SM060S13Converts to a T-Handle driver. Includes 12 double ended longscrewdriver bits.

Air compressorPuma15Max. FAD (295L/Min) from a single phase compressor. Tank 58L. Pump displacement 390 L/Min.Comes with a 10m hose. Slow revving & quiet.

booster 12VBB12-760AUZTo start diesel engines up to 250hp as start assistance and 125hp without battery.

$56.90 GST Incl.

$49 48

$17.90 GST Incl.

$15 57 EA$14.50 GST Incl.

$12 61

$86.50 GST Incl.

$75 22

$1,299.00 GST Incl.

$1,129 57

$140.00 GST Incl.

$121 74

$799.00 GST Incl.

$694 78

$391.00 GST Incl.

$340 00

$1,299.00 GST Incl.

$1,129 57

15LEDLED LAMP

15LEDLED LAMP

JUST INJUST IN

69 17002Weld Steel 56.8g

69 17502Weld Plastic White 56.8g

HOTPRICE

WITH $400 RRP OF

ACCESSORIES

13

160 led Worklight floor mounted (240V)Q1147 600 Lumens. Impact Resistant Casing that is Dust and Splash Proof (IP44).Light Head Size: 220 x 180mm (600 LUMENS). 3M Lead.*It is not recommended to run this light for more than 8 hours continuously.

160 led tripod Worklight With bAttery bAckupQ1148 600 Lumens.Lithium Rechargeable Battery - 7.4V 2200MAH.240V accessory power outlet.Discharging Time: 2-3 Hours.Fold Out Adjustable Tripod.Light Head Size: 350 x 240mm.*It is not recommended to run this light for more than 8 hours continuously

160 led rechArgeAble Worklight floor mountedQ1181 600 Lumens. Rechargeable NI-MH Battery 7.2V 1800MAH. Work Time: 3 Hours.Recharge Time: 5-6 Hours.240V & 12V Chargers Included.For Indoor & Outdoor Use (IP44).

30W cree led floor mounted Work lightQ1189 1800 Lumens. Aluminium Die Cast Body.Tempered Glass. 240V 50HZ.5M Power Cable With Cable Collect Hooks.

10W cree led rechArgeAble Work lightQ1196800 Lumens. IP44 Rated.7.4V 4400MAH Rechargeable Lithium Battery.5 Hours Charge Time. 3 Hours Discharge Time.Includes 12V & 240V Charger.Light Dimensions: 145 x 165 x 230mm.

20W cree led rechArgeAble Work lightQ11971600 Lumens. IP44 Rated.7.4V 8800MAH Rechargeable Lithium Battery.5 Hours Charge Time. 3 Hours Discharge Time.Includes 12V & 240V ChargerLight Dimensions: 215 x 185 x 295mm

micro soldering hot Air kit 10 in 1PC211245Refillable torch. Chisel tip, fine soldering tip, flat tip, conical tip. Large soldering tip, knife tip. Heat shrink assembly.

soldering torch kitPC211267Blow Torch, Bar Tip, Conical Tip, Large Soldering Tip, Chisel Point Tip, Cleaning Sponge, Heat Shrink Assembly

rechArgeAble li-ion soldering ironPC212012Heat time 25 seconds. Inbuilt LED light to illuminate soldering area. Auto off / hold on safety switch. Handy Charging Dock and Stand Base.

turbo mAx heAt torch kitPC211278Adjustable flame for easy control. Auto ignition trigger with On/Off control. Safety lock switch.

soldering iron Work stAtionPC211178Work station with soldering iron rest support and cleaning sponge. Dual power soldering iron. On/Off indicator light. Solder coil.

$109.00 GST Incl.

$94 78

$280.00 GST Incl.

$243 48

$155.00 GST Incl.

$134 78

$340.00 GST Incl.

$295 65

$223.00 GST Incl.

$193 91

$340.00 GST Incl.

$295 65

$52.00 GST Incl.

$45 22

$106.00 GST Incl.

$92 17

$69.00 GST Incl.

$60 00

$57.00 GST Incl.

$49 57

$57.00 GST Incl.

$49 57

JUST INJUST INlights

MEASURINGMEASURING

14

lAser leVelFRE310Accurate to +/-3.0mm in 30 meters, 200m radius, auto levelling in horizontal and vertical, infra-red remote control, NiMh rechargeable batteries, and a plumb up beam. The laser can also scan and give a chalk line for interior set out. Comes with a survey quality staff and tripod.

lAser leVelFRE2010Accurate to +/- 3.0mm in 30 meters and a 250m radius, Auto levelling in vertical and horizontal, infra-red remote with slope, NiMh rechargeable and alkaline battery packs, plumb up and down dots, slope in X & Y up to 10%, Scanning function for interior set out. Comes with tripod and staff.

electronic VerniersWith 0.01mm graduations. Manufactured from hardened stainless steel.

M700 150mm/6” M701 200mm/8”

lAser distAnce meAsurerST1726311 functions, 60m working range, red laser diode, illuminated display, protection class IP 54 (rain/dust).

eZy-reAd tApe 8mLKELW148SI

Suits right or left handers. Numerals are easy to read.

tApe meAsure750-8000T8m x 25mm high visibility.

lAser leVelFRE2010-25If you have a digger then this is the tool for you. Dial up grade in X & Y to 10%, fully functioned wireless remote with LCD display tells you exactly what the laser is doing. Change grade from the cab, change speed, or put into sleep mode. +/- 3.0mm accuracy 250m radius. NiMh and alkaline battery packs, Auto levels in vertical and horizontal, visble beam and chalk line function so you can use this to build the house when you have prepared the site. If you do site prep and construction this is the tool for you. Pair with an LS708 or LS706 boom receiver for your digger

boom receiVerLS706A boom receiver for excavators, 360 degree 300mm receiving window, strong rare earth magnets, internal NiMh rechargeables, 12 and 24VDC powered by machine battery, cables supplied. Option of in cab display. Hard padded case.

combinAtion sQuAre 300mm119180107With protractor, angle head and centre head sliding on the rule graduated in mm & inches.

meAsuring WheelMW-150Adjustable handle for different user heights. Accurate measurment with easy to read numbers.

long tApe meAsure 30m x 10mmTA3111Grips on casing for ease of control.

$43.50 GST Incl.

$37 83

$99.00 GST Incl.

$86 09

$15.90 GST Incl.

$13 83

$34.40 GST Incl.

$29 91

$29.90 GST Incl.

$26 00

$1,179.00 GST Incl.

$1,025 22

$599.00 GST Incl.

$520 87$875.00 GST Incl.

$760 87

$844.00 GST Incl.

$733 91

$459.00 GST Incl.

$399 13

$115.00 GST Incl.

$100 00

GREATVALUE

SUPERPRICE

EASYREAD

STEELBLADE

$69.00 GST Incl.

$60 00

CHALK LINE& CHALK

LUBRICATIONLUBRICATION

WORKSHOPWORKSHOP

15

$44.00 GST Incl.

$38 26

205l leVer Action drum pumpARP3370Cast alloy pump body.Suits 60L & 205L drums. rotAry drum pump

ARP3260205Litre high volume pumps up to 100 litres per minute.

greAse gunAH1227450gm. Develops up to 10,000psi..

pistol grip greAse gun 450gmGZ43086Develops 5000 PSI.

threAded rod cutterHTRCW10Forged alloy steel head with heat treated cutting dies, cuts fast, clean and precisely and eliminates grinding or filling. Cuts 5/16”-18 and 3/8”-16 soft threaded rod. 8 & 10mm s/steel dies also available.

cAble tie Assortment pAckKT1000P1000pc with sizes 100 - 300mm.

uniVersAl beAring pAckerARA2765Easy to use with either air or hand operated grease guns. Working height between cones: 0-50mm. For roller and ball bearings.

mini pistol grip greAse gunGZ43250Capacity: 85gm (3oz) grease cartridge or 120 cc bulk fill.

W&d VAcuum cleAnerMulti2020litre, with blower function.

jumper leAd 600AmpLEAJ-600B5mt lead supplied in a zip bag.

$25.00 GST Incl.

$21 74

$37.00 GST Incl.

$32 17

$36.00 GST Incl.

$31 30

$45.00 GST Incl.

$39 13$99.00 GST Incl.

$86 09

$75.90 GST Incl.

$66 00

$439.00 GST Incl.

$381 74$259.00 GST Incl.

$225 22

$282.00 GST Incl.

$245 22

4M TOWROPE

GREASE CARTRIDGE

greAse gunGZ42580Lever Action, robust construction, develops up to 8000psi

$35.00 GST Incl.

$30 43GUN

HOLDER

GUNHOLDER

oil cAns


GZ41631 300ml $12.09 $13.90

GZ41633 500ml $13.83 $15.90

GZ41634 700ml $15.57 $17.90

WORKSHOPWORKSHOP

16

gAs torch trigger stArtGAST-TS3000TKPropane kit. Hand piece has adjustable flame control.

micro torch gAs kitGAST-ST250KPrecision flame for detailed applications. Adjustable flame control knob for ease in switching between different applications. Micro Torch for soldering pipe.

multi storAge cAse 4 drAWerKK76124 x Heavy Duty Metal Multi‐Storage Cases. 20 Removable Coloured Storage Tubs in each. 410mm x 325mm x 300mm

drill press Vice 100mmT226340For use on a drill press where clamping is required.

screW extrActor set9900-SM210pc. Set contains 5 x screw extractors: No.1 - No.5 and 5 x LH stub drills: 5/64-19/64”

motion sensor led floodlightDOD1071180° Motion sensor floodlight. Lights up to 50 square metres. Perfect safety & security light.

gAs torch kit brAss 7pcGAST-UL125Use with Propane fuel only. Adjustable flame control knob for ease in switching between different applications. Solid brass burn tube for durability.

heAt shrink Assortment pAck 220pcKT31090Sizes 5 - 13mm.

drill tAp set3010-S1Save time! Drill, tap and deburr in one operation. M3 - M10. Tapered design prevents thread damage from over drilling. HSS.

rAtchet t hAndle tAp Wrench set4996-1/2QC4pc. Includes ratchet tap wrench, 65mm extension and two chucks. Suits tap sizes: M2-M12 & 5G-1/2”.

lAser flAshlight HY422-9178 super bright LED bulb flashlight with high powered laser pointer.

$85.00 GST Incl.

$73 91$64.00 GST Incl.

$55 65$35.00 GST Incl.

$30 43

$51.80 GST Incl.

$45 04

$85.00 GST Incl.

$73 91

$54.00 GST Incl.

$46 96

$18.90 GST Incl.

$16 43

$60.00 GST Incl.

$52 17

$60.00 GST Incl.

$52 17

$59.00 GST Incl.

$51 30

$228.00 GST Incl.

$198 26

LEDFLASHLIGHT

WORKSHOPWORKSHOP

17

tAp & die set 115pcSAV50-S1UNC/Metric/UNF/BSP.

step drill setSAV30-S14 - 30mm.Titanium coated.

drill set175097Contains 25 sizes 1mm to 13mm drills in 0.5mm rises. Made in NZ.

bolt remoVer set 4pcS3637G4017 Self centering drill tip, works on jagged, uneven rough breaks. Can drill into Grade 8 bolts. Made from high speed steel, tempered twice for longer tool life.

holesAW kitBL9596MContains sizes 16, 20, 22, 25, 32, 40, 50, 57, 64mm. Heavy-duty, shatterproof, bi metal construction for longer saw life.

Wheel dressers

no 0GZ12070Cutter diameter 1.1/4” (30mm)

no 1GZ12071Cutter diameter 1.1/2” (38mm)

teng interchAngeAble die chucks

rAtchet tAp Wrenches

hAnd cleAner stArter pAckSK29984502Includes 2 x 2000ml bottles of all natural hand cleaning soap.

nut crAcker set 309037Torque multiplying type. For the removal of stubborn nuts. Includes 7 x 1” drive sockets.

$33.50 GST Incl.

$29 13$17.50 GST Incl.

$15 22$22.60 GST Incl.

$19 65

$149.00 GST Incl.

$129 57$315.00 GST Incl.

$273 91

$189.00 GST Incl.

$164 35

$483.00 GST Incl.

$420 00

$69.00 GST Incl.

$60 00

$31.90 GST Incl.

$27 74$43.90 GST Incl.

$38 17

$19.90 GST Incl.

$17 30

$113.90 GST Incl.

$99 04

$99.00 GST Incl.

$86 09

$25.90 GST Incl.

$22 52

1/4”DRIVE

HEAVYDUTY

AROLUBETHREAD TESTER

BLUMOLDRILL SET

SPARECUTTERS

GZ093202.6 - 5.5mm

GZ093214.6 - 8.0mm

HOTPRICE

GREATVALUE

M140071 Tap Chuck M3- M8

M140072 Tap Chuck M5 - M12

M1400701/4” drive interchangeable die chuck for use with, for example, the Teng Tools mini palm ratchet.

WORKSHOPWORKSHOP

TOOL STORAGETOOL STORAGE

18

Winter liner cold series regulAr lengthER6850168502-Layer Cold Series Winter Liner: With warming pack pockets for cold conditions. Shoulder length, one size fits most. 2-Layer Cotton/Fleece. Shell: 100% cotton twill. Lining: 100% poly fleece.

Winter liner cold series shoulder lengthER6852168522-Layer Cold Series Winter Liner: With warming pack pockets for cold conditions. Shoulder length, one size fits most. 2-Layer Cotton/Fleece. Shell: 100% cotton twill. Lining: 100% poly fleece.

roll cAbinetKT87434-7BBall bearing slides, fully lockable, powder coated.670 x 460 x 950mm.

toolbox 3 drAWer stAckerKT87421-3BBall bearing slides.Fully lockable.Drawer liners.660 x 305 x 250mm.

storAge combo 2pcRS53569 drawer Tool Chest & 7 drawer Roll Cabinet.

blAck bAlAclAVAER682116821Stretch fleece keeps head and neck comfortable. One size fits most. 320g Polyester Fleece for warmth in extreme conditions.

nogA deburrer setNONG8150Comes with 10 blades for steel, aluminium and plastic.

tool chest 9 drAWerKT87411-9B660 x 305 x 430mm. Ball bearing slides, fully lockable, drawer liners, powder coated.

tool set 195pcCCT007Fantastic set of all the popular tools to set up your tool collection. See instore for a full listing.

$711.00 GST Incl.

$618 26

$299.00 GST Incl.

$260 00

$999.00 GST Incl.

$868 70

$899.00 GST Incl.

$781 74

$442.00 GST Incl.

$384 35

$15.50 GST Incl.

$13 48$22.90 GST Incl.

$19 91

$24.50 GST Incl.

$21 30$10.90 GST Incl.

$9 48

NOGAGREATVALUE

KAWASAKI125mm ANGLE

GRINDER

KAWASAKI150mm BENCH

GRINDER

HAND TOOLSHAND TOOLS

19

KT3036CR01-B3/8” drive. AF/Metric.6-22mm, 1/4 - 7/8”.

socket set 24pcKT6224CR3/4” drive ranging 22 - 50mm & 1 - 2”.

socket set 58pcKBT27741/4” drive. Ranges 4 - 13mm & 3/16 - 9/16” in standard. 6 - 13mm in deep reach.

bit set 32pcKT1032CQ01Range of popular screwdriver bits,plus square drive.

socket set 48pcKT2549CR1/4” drive Deep/Standard ranging 4 - 13mm & 5/32 - 1/2”

socket set 43pcGCAD43031/2” drive ranging 8 - 32mm & 3/8 - 1.1/4” hex socket sets

4012A/10 10pc 1/2” drive 3/16 - 3/4”4012M/10 10pc 1/2” drive 5 - 19mm”

impAct socket set 18pcGCAD18071/2” drive. 10 - 32mm.Made in Taiwan.

mini bits set 29pcTM029Bit set containing 29 pieces and includes magnetic bit holder 50mm and mini bits ratchet with 8mm ring end.

$189.00 GST Incl.

$164 35

$199.00 GST Incl.

$173 04

$489.00 GST Incl.

$425 22

$129.00 GST Incl.

$112 17

$239.00 GST Incl.

$207 83

$33.70 GST Incl.

$29 30

$54.00 GST Incl.

$46 96

$89.70 GST Incl.

$78 00

HOTPRICE

$146.00 GST Incl.

$12696 EA

$329.00 GST Incl.

$286 09

$109.00 GST Incl.

$94 78

1/2” driVe 42pcKT4042CR06Ranging 10 - 32mm & 5/16 - 1.1/4”.Made in Taiwan.

1/4” driVe 30pc.KT2530CR01 Ranging 4 - 12mm & 5/32 - 1/2”.Made in Taiwan.

socket set deAl1/4” DRIVE26PC SOCKET

SET


20

screWdriVer set 10pc605-10-PC-AUWith phillips, flat tip and robertson.

screWdriVer set 10pcWSS5013Includes, flat, phillps &square-head screwdrivers.

plier set 3 pcGAAE0307

200mm Linesman, Long Nose & Diagonal Cutting.

rAtcheting circlip plier301800For internal and external use, contains four different replaceable tip configurations with 2 choices of tip size, 2.8 and 3.0mm, spread of 85mm, length 270mm.

screWdriVer set 20pcGZC2005With flat, phillips, pozidrive & square screwdrivers. Plus a selection of screwdriver bits.

bit set 40pcGAAD400210mm hex bits. Selection of 30mm & 75mm long bitsspline, star & hex.

engineers pliersMade for the trade with lifetime gaurantees.


405-1907 180mm Diagonal $18.26 $21.00

405-1948 200mm Linesman $18.26 $21.00

405-1928 200mm Long Nose $18.26 $21.00

405-1958 200mm End Nippers $18.26 $21.00

grooVe joint pliers

circlip plier set 10pc301939Thumb screw quick conversion type.

$135.00 GST Incl.

$117 39

$53.00 GST Incl.

$46 09

$57.00 GST Incl.

$49 57

$94.70 GST Incl.

$82 35$89.00 GST Incl.

$77 39

$69.00 GST Incl.

$60 00

$92.00 GST Incl.

$80 00

trAde pliersTaiwan made Trade pliers.


KT6311-06 Long Nose 163mm $16.96 $19.50

KT6311-08 Long Nose 203mm $21.74 $25.00

KT6211-06 Diagonal 163mm $16.96 $19.50

KT6231-08 Diagonal 200mm $21.74 $25.00

KT6111-06 Linesman 163mm $16.96 $19.50

KT6111-08 Linesman 213mm $21.74 $25.00

KT6411-06 End Nipper 165mm $21.74 $25.00

HOTPRICE

circlip plier set 4pcKT42114GPContains internal and external pliers bent and straight.

$99.00 GST Incl.

$86 09$19.10 GST Incl.

$16 61$29.50 GST Incl.

$25 65$51.90 GST Incl.

$45 13400-0113 250mm 400-0114 300mm 400-0117 400mm


GREATVALUE

21

geAr spAnner set 7pcWC0346 8-17mm, 2 way 72 tooth reversible gear, built to exceed ANSI Standards.

roe spAnner setsPrecision broached jaws for sure gripping.

AdjustAble WrenchesFeatures an adjustable jaw that allows the tightening and release of both pipes and bolts and nuts.


9070P 150mm $32.96 $37.90

9071P 200mm $40.78 $46.90

9072P 250mm $52.09 $59.90

9073P 300mm $64.26 $73.90

AdjustAble WrenchesModel Size +GST Inclusive

415-0006 150mm $12.09 $13.90

415-0008 200mm $16.43 $18.90

415-0010 250mm $20.43 $23.50

415-0012 300mm $26.96 $31.00

415-0015 375mm $60.00 $69.00

415-0018 450mm $112.17 $129.00

415-0024 600mm $149.57 $172.00

bAll heAd hex key set longGAAL0918Colour coded set 1.5 - 10mm. Get more angle when turning capscrews.

geAred reVersible Wrench set 15pcGRA150972 tooth ratchet mechanism. 8 -19mm plus socket adaptors. Offset angle head.

slim jAW 200mm AdjustAble Wrench9031-T45% thinner jaws, compared to a standard adjustable wrench of equivalent size to be able to work in confined spaces, like under a tub or sink, above ceilings or below floors.

bAll end key setsSlim profile head allows easy access into confined areas. Get 25 degrees of angle entry.

KT20107MR01 Metric 2.5 - 10mmKT20107SR Imperial 3/32 - 3/8”

bAll point hex key set extrA longKT20109MR1.5 - 10mm. Get more angle when turning capscrews.

spAnner setWAT0766Features 15 degree offset and chamfered open end for easy access. 8 - 32mm.

$249.00 GST Incl.

$216 52

$189.00 GST Incl.

$164 35

$29.00 GST Incl.

$25 22

$34.90 GST Incl.

$30 35

$69.00 GST Incl.

$60 00

$112.00 GST Incl.

$97 39

$76.00 GST Incl.

$66 09$39.90 GST Incl.

$34 70$91.00 GST Incl.

$79 13

$22.90 GST Incl.

$19 91 EA

HOTPRICE

HOTPRICE

KAWASAKIHAMMER

DRILL

421-131717pc 6 - 22mm inclusive.

421-134111pc 7 - 19mm

421-132424pc 1/4 - 1”, 7 - 22mm


22

bAll pein hAmmersWith hickory handles for a long working life.


H328 4oz $12.43 $14.30

H330 8oz $16.70 $19.20

H332 12oz $17.39 $20.00

H334 16oz $20.78 $23.90

H336 24oz $27.13 $31.20

H338 32oz $28.26 $32.50

H340 40oz $30.43 $35.00

poWer bArs

mAgnifier c/W led light587H100mm.

flexible led light587MFlexible, adjustable lighting with magnetic base. Equipped with 3 LED diodes. Suitable batteries 3 x LR44. Length: 370mm, diameter 25mm 76.5 lumens.

pin punch set 8pcRTP8Contains 3mm taper punch, and 2,3,4,5,6,7,8,10mm x 150mm Pin Punches. Aluminium trAiler box

K510592.0mm Chequer Plate construction. Fully welded. Stainless steel hinges. Single T Handle Lock with

Weather Cap. Thick lid design. Single lid gas strut.

Angled sides for maximum trailer articulation.

hook & pick setULH4WHigh carbon polished needle steel hooks & picks - straight scribe, plus 3 different hook styles for all kinds of assembly, inspection and service work.

pick up toolULHT-2Lifts 3.5lbs without powercap. Powercap on increases lifing power by 45%. Telescopes 168 - 831mm.

torQue multipliersTorque multipliers with a 1:3 ratio. Precision instruments for loosening tight nuts and bolts. For use with torque wrenches and impact sockets.

hAnd riVeterHR001Complete with 4 interchangeable nozzles for setting rivets 2.4mm, 3.2mm, 4.0mm and 4.8mm. Made in Japan.

$625.00 GST Incl.

$543 48$719.00 GST Incl.

$625 22

$344.00 GST Incl.

$299 13

$17.50 GST Incl.

$15 22

$19.90 GST Incl.

$17 30

$79.00 GST Incl.

$68 70

$35.00 GST Incl.

$30 43

$39.90 GST Incl.

$34 70$61.00 GST Incl.

$53 04

$59.90 GST Incl.

$52 09

$69.00 GST Incl.

$60 00

GREATVALUE

CFBC12153/8” Drive 375mm

CFBC16241/2”Drive 600mm

HOTPRICE

®

®

®

MP1400

1/2” F to 3/4” M Max Force – 1400Nm / 1000ft/lb

MP12700 3/4”F to 1”MMax Force – 2700Nm / 2000ft/lb

TENGPACK BACK


23


DC10 13.96KW $691.30 $795.00

DC15 20.12KW $730.43 $840.00

DC25 26.96KW $899.13 $1,034.00

DC40 35.44KW $1,016.52 $1,169.00

DC45 42.96KW $1,158.26 $1,332.00

drill bit set 88pc841372HTitanium coated.

file set1-478-08-1-2Set of five 8” engineers files in popular cuts with handles.

generAtor 2700WEGS02487HP, 3000RPM, Powerbuilt XT210 OHV Engine. Low oil sensor prevents engine damage from low oil. 2700 w (2.7kW) Rated output, 3200 w Peak output.

holesAW set802-0609Bi-metal 9pc. Sizes 22, 29, 35, 44, 51, 64mm, 2 arbors.

AttAck driVer 6pcAG112ARubber grip handle and phillips and flat screwdriver bits. 1/2” drive.

generAtor 5000WEGS0249

13HP, 3000RPM, Powerbuilt XT390 OHV Engine. 5000 w (5.0kW)

Rated output, 6000 w Peak output. Low oil sensor prevents engine

damage from low oil.

generAtor 6250WEGS025014HP, 3000RPM, Powerbuilt XT410 OHV Engine. 6250 w (6.25kW) Rated output, 7250 w Peak output. Low oil sensor prevents engine damage from low oil.

$1,599.00 GST Incl.

$1,390 43$1,193.00 GST Incl.

$1,037 39

$749.00 GST Incl.

$651 30

$57.00 GST Incl.

$49 57

$85.00 GST Incl.

$73 91

$85.00 GST Incl.

$73 91

$62.90 GST Incl.

$54 70

HEATERSHEATERS

drill bit & bit set 199pcWBS3286HTotal drill set featuring titanium coated drill bits.

$86.00 GST Incl.

$74 78

TRAVELMUG

diesel heAtersRobust, compact design, High efficiency combustion, Stainless steel combustion chamber.

rAdiAnt diesel heAtersRadiative direct fire, industrial portable heater. Adjustable air blow heat angle; between 45° upward, 10° downward. Safety features include Flame out, overheat, shock detection and incorrect voltage protection. Equipped with air deflation valve to reduce start up smoke. EOS7113 23KW

EOS7114 40KW

$2,379.00 GST Inclusive

$2,068 70

$1,549.00 GST Inclusive

$1,346 96

GREATVALUE

We are a fair-minded company and try to exceed the requirements of all ‘Fair Trading’ legislation. Prices are current for the period denoted on the cover. Stocks are not always available in all stores all the time but we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologize and try to take all reasonable measures to fix the issue for you.

If you can’t get to us, phone, fax or email and we will send it to you

A lot of anglers seem to think that winter is a time to put the fishing gear in the cupboard and pursue other interests. To me, however, winter is a very exciting time to fish with the ever present chance of big snapper and huge kingfish. It is also the time when grouper or hapuku turn up on the shallower, more accessible pins and together with bass and blue nose form a group of delicious table fish known more as angling hard work than sport fish. I have caught hapuku in water as shallow as 20 metres down on the Wairarapa Coast but that is because there remain areas down there free from the pressure of the North.

Geordie Muurman, who charters Ocean Ranger out of Leigh Harbour, loves winter hapuku and kingfish, targeting them out as far as the Mokohinau Islands. Charters in winter are a great option especially as the weather can be fickle and fish localised to selected spots. When chartering you

are free of the need to make rational decisions over weather (that becomes someone elses responsibility) and you also invest in local knowledge.

There are those of us who love to venture out in our trailer boats, regardless of season, and one of the benefits is not being restricted to charter times. During winters months bite times are often shorter, one school of thought being that colder water slows metabolism and reduces the feeding frequency. I often find that there are brief, intense feed times and one of them often relates to the setting of the sun. Various tables are available that calculate bite times and the information they are based on is sound, however mid tide as the sun is setting produces some phenomenal action. Good weather, the right tides, appropriate structure, plenty of burley, lightly weighted floating baits (preferably fresh but don’t leave home without pilchards) and plenty of patience

are all the ingredients necessary to capitalise on great winter action.

A good friend of mine and I have repeatedly fished some well known areas around Auckland always in the company of other boats. We concentrate on getting our boat position dead right which can mean adjusting the anchor position more than once. Once our angle to the selected structure and fish sign is right then we sit down to wait it out and maximise the value of our burley trail. Often, one by one, the other boats leave for home. Usually they have become frustrated and just like them at that

point, we have caught bugger all. Then as the sun hits the horizon all hell breaks loose and half an hour later we have what we need and also head for the hills.

After several years of soft bait fishing I have noticed that the intensity of soft bait action seems to ease off during winter but I still get some amazing action, albeit more concentrated. Remember that with artificial baits movement is often the key to success.

One other great option during the winter months when time is limited is a Skywork Helifishing trip. Skywork Helicopters have a base near Warkworth, just north of Auckland and access some amazing fishing on and around Great Barrier Island. There are so many fantastic airfares and accommodation packages available these days that a couple of days in the north taking in a Great Barrier helifish can be a very cost effective option especially when combined with a business trip. An excursion like this is also a great staff incentive. Drop the idea of a helifish in front of your team and watch them go!

Last week I flew to Barrier with four prize winners. We landed, tied on their rigs, baited their hooks (pilchards) and by the time we got things sorted and the helicopter tied down the boys had seven nice fish lying on the rocks. We had two hours of amazing action, loaded up and headed back to my place for fresh fish and chips. Delicious!I guess in summary winter is a time I love. Sure, you need to modify your approach and think a little differently but there are a great many angling options available guaranteed to gladden the heart of any angler.

Tight Lines!

Tackle Talk By Graeme Sinclair

TradeZone caliper 132

Documents

Transcript of TradeZone caliper 132