Tracpod 84 - Amazon Web Servicescdb.s3.amazonaws.com/ItemRelatedFiles/10246/tracpod-84.pdf · Thank...

User Manual

Tracpod 84

Version 1.1

____________________________________________________________________________ Page 1 of 13 Tracpod 84 User Manual

Introduction

Thank you for purchasing Tracpod 84. Tracpod 84 is a LED batten for professional use. With cutting-edge RGB color mixing technology capable to generate up to 16.5 million colors for use in stage production and fixed installation. The LED batten contains ten LED modules and each can separate into four individual sections, provides total of forty pixels capable to run graphics or matrix when multiple unit are used together. Tracpod 84 can be operated in stand-alone or advance control via external DMX controller. WHAT IS INCLUDED

1 x Tracpod 84 LED batten 1 x Power cord 1 x Power connection cable User manual

Carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. If any parts appear damaged or missing, notify the shipper immediately and retain packing material for inspection. In the event that the fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. 1.1 Features

DMX 512. Standard 4 channels and full function 7 channels DMX control. Stand – alone operation:

Master/Slave. Manual color mixing Auto-chases with adjustable speed and fade. 16 auto chases.

40 sections of LED module to create LED matrix effect. ____________________________________________________________________________ Page 2 of 13 Tracpod 84 User Manual

1.2 Overview

1. LED Module 2. Hanging Bar 3. Gear Screw 4. Fan 5. Power Switch 6. Mode Button 7. Select Button 8. Up Button 9. Down Button 10. Fuse Holder

11. Safety Ring 12. Microphone 13. Sensitivity Level 14. Fan 15. Power Input 16. 3-PIN DMX Input 17. 5-PIN DMX Input 18. 5-PIN DMX Output 19. 3-PIN DMX Output 20. Power Output


1.3 Safety Instructions

CAUTION

UNPLUG MAINS BEFORE INSTALLING OR WIRING THE FIXTURE

User must be qualified to be involved with installation and maintenance of this product. User must follow the safety instruction and warning notes written in this manual.

CAUTION

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE

IMPORTANT

For indoor use only Keep dry Install only in well ventilated areas Do not attempt to open the controller or fixture, no user serviceable parts inside. Before attaching the device, make sure the installation surface can hold a minimum point

load of ten times the device’s weight.

Installation

2.1 Connection to the mains

i. AC Power

Tracpod 84 is available in AC100-240V 50-60HZ and is supplied to match your local voltage and frequency.

ii. Replacing Plug

The power cable must be fitted with a grounding-type cord cap (earthed type mains plug) that fits your power distribution system.


Wire (EU) Wire (US) Pin Marking

Brown Black Live L

Blue White Neutral N

Yellow Green GND 2.2 Connection between fixtures

The fixture is equipped both 3 and 5-PIN XLR sockets for DMX input and output. Only use a shielded twisted pair cable designed for 3 or 5-PIN XLR plugs and connectors in order to connect the controller with fixture or one fixture with another.

i. DMX Serial Data Link

If you are using the standard DMX controller, you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX-chain. Connect the DMX output of first fixture in the chain with DMX input of next fixture. Always connect one output with input of next fixture until all fixtures are connected.


ii. Master/Slave Data Link

Connect the DMX output of the master fixture in the data chain with the DMX input of first slave fixture. Always connect output with the input of next slave fixture until all slave fixtures are connected.

2.3 Mounting the fixture

i. Truss Mount

Fixture should be hung on truss structure using a mounting clamp. Always secure the fixture with a secondary safety attachment.


ii. Wall Mount

Mount the fixture to wall as illustrated below. Before attaching the device, make sure the installation surface can hold a minimum point load of 10 times the device’s weight.

iii. Floor Mount

Mount the fixture on the ground floor as illustrated below.


Technical Specification Power Input Voltage: AC100-240V 50-60HZ Power Consumption: 120 W Fuse: T2.0A Light Source LED: 840 RGB LED (280 Red,280 Green, 280 Blue) Beam angle: 15° Performance 2300 LUX @ 1M 1000 LUX @ 2M Control and Programming Protocol: USITT DMX 512 DMX Channels: 4, 7, 8, 20, 40, 160 Control Options: DMX, Master/Slave, Manual color mix, Auto-chase Connections Power: Neutrik Powercon Data: 3 and 5-PIN XLR Dimensions and Weight Length: 1010 mm Width: 258 mm Height: 236 mm Weight: 11.5 kg

____________________________________________________________________________ Page 12 of 13 Tracpod 84User Manual

Maintenance Keep the fixture dry and only install in well-ventilated areas. Clean the fixture with a moist, lint-free cloth. Never use alcohol or solvents. To maintaining adequate cooling, clean the dust from air vent regularly.

Fuse Replacement

1. Unplug mains before replacing fuse.

2. Unscrew the fuse holder using a flat head screwdriver (anti-clockwise).

3. Remove the damaged fuse from its holder and replace with exact same type fuse.

4. Insert the fuse holder back in its place then reconnect power.


Alkalite LED Technology Corp. Website: www.alkalite.com Email: [email protected]

PMA0100

Tracpod 84 - Amazon Web Servicescdb.s3.amazonaws.com/ItemRelatedFiles/10246/tracpod-84.pdf · Thank...

Documents

Transcript of Tracpod 84 - Amazon Web Servicescdb.s3.amazonaws.com/ItemRelatedFiles/10246/tracpod-84.pdf · Thank...