Trace out the latitude, longitude, time, date, number of satellites in view and speed using gps and...
2
Embedded systems Ph:7842522786 9948887244 Trace out the latitude, longitude, time, date, number of satellites in view and speed using GPS and updating to PC Abstract: The Global Positioning System is usually called as GPS. The NAVSTAR GPS (Navigation Signal Timing and Ranging Global Positioning System) is a collection of Satellites, which monitors the Longitude and Longitudes of a particular position. A typical GPS receiver calculates its position using the signals from four or more GPS satellites . Four satellites are needed since the process needs a very accurate local time, more accurate than any normal clock can provide, so the receiver internally solves for time as well as position.GPS receivers collect signals from satellites in view. They display the user's position, velocity, and time, as needed for their marine, terrestrial, or aeronautical applications. Some display additional data, such as distance and bearing to selected waypoints or digital charts. One of the most important communications in the world is a satellite communication. That receives the data globally from the satellite with the perfect position. The GPS module is manufactured for grasping the positions of longitudinal, latitudinal positions time, date and number of satellites using satellite communication. This module is interfaced to the micro [email protected] Vijayawada Hyderabad Page 1
-
Upload
khadarbaba-shaik -
Category
Education
-
view
599 -
download
13
description
embedded system, wwww.skesystems.com,khadarbaba
Transcript of Trace out the latitude, longitude, time, date, number of satellites in view and speed using gps and...
Embedded systems Ph:7842522786 9948887244
Trace out the latitude, longitude, time, date, number of satellites in view and speed using GPS and updating to PC
Abstract:
The Global Positioning System is usually called as GPS. The NAVSTAR GPS
(Navigation Signal Timing and Ranging Global Positioning System) is a collection of Satellites,
which monitors the Longitude and Longitudes of a particular position. A typical GPS receiver
calculates its position using the signals from four or more GPS satellites. Four satellites are
needed since the process needs a very accurate local time, more accurate than any normal clock
can provide, so the receiver internally solves for time as well as position.GPS receivers collect
signals from satellites in view. They display the user's position, velocity, and time, as needed for
their marine, terrestrial, or aeronautical applications. Some display additional data, such as
distance and bearing to selected waypoints or digital charts.
One of the most important communications in the world is a satellite communication.
That receives the data globally from the satellite with the perfect position. The GPS module is
manufactured for grasping the positions of longitudinal, latitudinal positions time, date and
number of satellites using satellite communication. This module is interfaced to the micro
controller through a max232 which is a voltage level converter between GPS module to the
micro controller. When a message was received from the GPS then the micro controller will
display that message on LCD and as well as PC.
The applications for this project are in military, Navigation, Automobiles, Aircrafts fleet
management, remote vending, remote monitoring, remote control, security systems, tele-
services, etc.
Hardware:
AT89S52 LCD
GPS MODULE
[email protected] Vijayawada Hyderabad Page 1
Embedded systems Ph:7842522786 9948887244
PC MODULE
RS232
MAX232
Software:
KEIL UV2 IDE tool
Functionality of all above components
Embedded C programming
Block Diagram:
[email protected] Vijayawada Hyderabad Page 2
POWER SUPPLY LCD DISPLAY
AT89S52
RESET CIRCUIT
CRYSTAL CIRCUIT
GPS RECEIVER
MAX232
COMPUTER
