TQM DERS 3
-
Upload
zaman-parvez -
Category
Documents
-
view
226 -
download
0
Transcript of TQM DERS 3
-
7/30/2019 TQM DERS 3
1/52
CHAPTER 3
Philosophies andFrameworks
-
7/30/2019 TQM DERS 3
2/52
Leaders in the Quality
RevolutionW. Edwards Deming
Joseph M. Juran
Philip B. Crosby
Armand V. Feigenbaum
Kaoru IshikawaGenichi Taguchi
-
7/30/2019 TQM DERS 3
3/52
Whos Who?
Deming ____
Juran ____
Crosby ____
-
7/30/2019 TQM DERS 3
4/52
EDWARD DEMINGDr. W. Edwards Deming is known as thefather of the Japanese post-war industrial
revival and was regarded by many as theleading quality guru in the United States. Hepassed on in 1993. Dr. Deming helped Japanconstruct the global economic jargon that has
been emulated and copied around the world.In Japan today, there is no greater honourthan to be awarded the The Deming Prize.
-
7/30/2019 TQM DERS 3
5/52
Demings work in Japan following World War II thatmade him famous, at least in Japan. In 1949 the Union ofJapanese Scientists and Engineers (JUSE) asked Deming
to come to Japan to help increase productivity. He went in1950 and gave eight lectures to 230 of Japans leadingindustrialists. (Eighty percent of Japans capital wascontrolled by the men in that room, Deming claims.)Ironically, it was the same course he had taught Americans
during the war. They asked Deming how long it wouldtake to shift the perception of the world from the existing
paradigm that Japan produced cheap, shoddy imitations toone of producing innovative quality products.
-
7/30/2019 TQM DERS 3
6/52
He trained as a statistician, his expertise was used during
World War II to assist the United States in its effort to improvethe quality of war materials. Dr. Deming told the group that if
they would follow his directions, they could achieve the
desired outcome in five years. Few of the leaders believed
him. But they were ashamed to say so and would beembarrassed if they failed to follow his suggestions.
As Dr. Deming told it, "They surprised me and did it in four
years." He was invited back to Japan time after time where he
became a revered counsellor. For his efforts he was awarded
the Second Order of the Sacred Treasure by the former
Emperor Hirohito. In 1950 the annual Deming Prize(s) were
established by the Union of Japanese Scientists and EngineersJUSE .
-
7/30/2019 TQM DERS 3
7/52
Deming Chain ReactionImprove quality
Costs decrease
Productivity improves
Increase market share with better quality and lower prices
Stay in business
Provide jobs and more jobs
-
7/30/2019 TQM DERS 3
8/52
Key IdeaThe Deming philosophy focuses on continual
improvements in product and service quality by
reducing uncertainty and variability in design,manufacturing, and service processes, driven by
the leadership of top management.
-
7/30/2019 TQM DERS 3
9/52
Demings Quality Circle
-
7/30/2019 TQM DERS 3
10/52
The Deming Cycle
Act Plan
Study Do
-
7/30/2019 TQM DERS 3
11/52
Plan (1 of 2)1. Define the process: its start, end, and what it does.
2. Describe the process: list the key tasks performed andsequence of steps, people involved, equipment used,
environmental conditions, work methods, and materialsused.
3. Describe the players: external and internal customersand suppliers, and process operators.
4. Define customer expectations: what the customer
wants, when, and where, for both external and internalcustomers.
5. Determine what historical data are available on processperformance, or what data need to be collected tobetter understand the process.
-
7/30/2019 TQM DERS 3
12/52
Plan (2 of 2)6. Describe the perceived problems associated with
the process; for instance, failure to meet customerexpectations, excessive variation, long cycle times,
and so on.
7. Identify the primary causes of the problems andtheir impacts on process performance.
8. Develop potential changes or solutions to the
process, and evaluate how these changes orsolutions will address the primary causes.
9. Select the most promising solution(s).
-
7/30/2019 TQM DERS 3
13/52
Do1. Conduct a pilot study or experiment to
test the impact of the potential
solution(s).2. Identify measures to understand how
any changes or solutions are
successful in addressing the perceivedproblems.
-
7/30/2019 TQM DERS 3
14/52
Study1. Examine the results of the pilot study
or experiment.
2. Determine whether processperformance has improved.
3. Identify further experimentation that
may be necessary.
-
7/30/2019 TQM DERS 3
15/52
Act1. Select the best change or solution.
2. Develop an implementation plan: what
needs to be done, who should be involved,and when the plan should be accomplished.
3. Standardize the solution, for example, bywriting new standard operating procedures.
4. Establish a process to monitor and controlprocess performance.
-
7/30/2019 TQM DERS 3
16/52
Demings System
of Profound KnowledgeAppreciation for a system
Understanding variation
Theory of knowledge
Psychology
-
7/30/2019 TQM DERS 3
17/52
The Deming Cycle
Act Plan
Study Do
-
7/30/2019 TQM DERS 3
18/52
SystemsMost organizational processes arecross-functional
Parts of a system must worktogether
Every system must have a purpose
Management must optimize thesystem as a whole
-
7/30/2019 TQM DERS 3
19/52
VariationMany sources of uncontrollable variationexist in any process
Excessive variation results in productfailures, unhappy customers, andunnecessary costs
Statistical methods can be used toidentify and quantify variation to helpunderstand it and lead to improvements
-
7/30/2019 TQM DERS 3
20/52
Theory of KnowledgeKnowledge is not possible withouttheory
Experience alone does not establish atheory, it only describes
Theory shows cause-and-effectrelationships that can be used forprediction
-
7/30/2019 TQM DERS 3
21/52
PsychologyPeople are motivated intrinsically(hakiki)and extrinsically(hariten)
Fear is demotivating
Managers should develop pride and
joy in work
-
7/30/2019 TQM DERS 3
22/52
Demings 14 Points1.Create and publish a company mission
statement and commit to it.
2. Learn the new philosophy of TQM.
3. Use inspection to improve design & processes.
4. End business practices driven by price alone.
5. Constantly improve system of production
and service.
6. Institute training.
7. Teach and institute quality leadership (guidance).
8. Drive out fear and create trust.
-
7/30/2019 TQM DERS 3
23/52
9.Optimize team and individual efforts.10. Eliminate exhortations for work force
Work to improve the system.11. Eliminate numerical quotas and Managementby objective
Focus on improvement.
12. Remove barriers that rob people of prideof workmanship.13. Encourage education and self-improvement.14. Take action to accomplish the transformation
-
7/30/2019 TQM DERS 3
24/52
Jurans Quality TrilogyQuality planning
Quality control
Quality improvement
http://www.juran.com/main.html -
7/30/2019 TQM DERS 3
25/52
Key IdeaJuran proposed a simple definition of quality:
fitness for use. This definition of quality
suggests that it should be viewed from bothexternal and internal perspectives; that is,
quality is related to (1) product performance
that results in customer satisfaction; (2)
freedom from product deficiencies, which
avoids customer dissatisfaction.
Joseph Juran follows W Edward Deming at least
-
7/30/2019 TQM DERS 3
26/52
Joseph Juran follows W Edward Deming, at leastin time, as one of the major Quality Gurus. Indeed,he followed Deming to Japan where his name is
just as illustrious as that of Deming. Juran wasawarded the Order of the Sacred Treasure by theEmperor for his work in the development ofquality in Japan.
The difference between Juran and Deming isreally no more than emphasis. While the core ofDeming's work is his use of statistical tools toidentify quality problems and their causes, Jurancentres upon the role of employees in quality
management - indeed their involvement andempowerment. Juran would not deny the utility ofstatistical techniques any more than Demingwould deny the importance of employee
empowerment.
-
7/30/2019 TQM DERS 3
27/52
Juran's 'Quality Planning Road Map' consists of the following
steps:
1.Identify who are the customers.
2.Determine the needs of those customers.
3.Translate those needs into our language.
4.Develop a product that can respond to those needs.
5.Optimize the product features so as to meet our needs aswell as customer needs.
6.Develop a process which is able to produce the product.
7.Optimize the process.
8.Prove that the process can produce the product underoperating conditions.
9.Transfer the process to Operations.
-
7/30/2019 TQM DERS 3
28/52
Phillip B. CrosbyQuali ty is free . . . :
Quality is free. Its not a gift, but it is free.What costs money are the unquality things -
- all the actions that involve not doing jobs
right the first time.
-
7/30/2019 TQM DERS 3
29/52
Philip Crosby who is recognised as one of the topgurus of quality. Crosby is best known for conceptslikeDo It Right the First Time, and Zero Defects.
Crosby is also recognized as a lecturer, an author,and a businessman whose had over forty years ofhands on management experience. In his lecturershe describes how it is the manager role to make surethat the company, employees, and themselves are
successful. He relates his lectures back to real lifesituation that has happened to him. As an author hehas written and edited thirteen books, all that havebeen best sellers. His first book is the one he is
probably most famous for as an author. The name ofthat book was Quality is Free. In 1996, he came outwith a book that was named Quality is Still Free.
-
7/30/2019 TQM DERS 3
30/52
Philip B. CrosbyAbsolutes of Quality Management:
Quality means conformance to requirements
Problems are functional in natureDo the job right the first time
Cost of quality is the only useful measurement
Zero defects is the only performance standard
http://www.philipcrosby.com/ -
7/30/2019 TQM DERS 3
31/52
A.V. FeigenbaumFeigenbaum's ideas are contained in his nowfamous book Total Quality Control, first
published in 1951 under the title QualityControl: Principles, Practice, andAdministration, and based on his earlierarticles and program installations in the field.
The book has been translated into more thana score of languages, including Japanese,Chinese, French, and Spanish.
-
7/30/2019 TQM DERS 3
32/52
Feigenbaum is recognized as aninnovator in the area of quality cost
management. His was the first text tocharacterize quality costs as the costsof prevention, appraisal, and internal
and external failure.
-
7/30/2019 TQM DERS 3
33/52
A.V. FeigenbaumThree Steps to Quality
Quality Leadership, with a strong
focus on planningModern Quality Technology, involvingthe entire work force
Organizational Commitment,supported by continuous training andmotivation
-
7/30/2019 TQM DERS 3
34/52
Kaoru IshikawaHe has been awarded the Deming Prizeand the Nihon Keizen Press Prize, the
Industrial Standardisation Prize for hiswritings on Quality Control, and theGrant Award in 1971 from the American
Society for Quality Control for hiseducation programme on QualityControl.
-
7/30/2019 TQM DERS 3
35/52
the early origins of the now famous QualityCircles can be traced to the United States in
the 1950s, Professor Ishikawa is best knownas a pioneer of the Quality Circle movementin Japan in the early 1960s, which has nowbeen re-exported to the West. In a speech to
mark the 1000th quality circle convention inJapan in 1981, he described how his worktook him in this direction.
-
7/30/2019 TQM DERS 3
36/52
Kaoru IshikawaInstrumental in developingJapanese quality strategy
Influenced participative approachesinvolving all workers
Advocated the use of simple visualtools and statistical techniques
-
7/30/2019 TQM DERS 3
37/52
At the simplest technical level, his work hasemphasised good data collection and presentation,the use of Cause-and-Effect (or Ishikawa orFishbone) Diagrams.
Ishikawa sees the cause-and-effect diagram, likeother tools, as a device to assist groups or qualitycircles in quality improvement. As such, heemphasises open group communication as criticalto the construction of the diagrams. Ishikawadiagrams are useful as systematic tools for finding,
sorting out and documenting the causes ofvariation of quality in production and organisingmutual relationships between them.
-
7/30/2019 TQM DERS 3
38/52
Cause and Effect Diagrams
-
7/30/2019 TQM DERS 3
39/52
Thus Ishikawa sees the Company-wide QualityControl movement as implying that quality does
not only mean the quality of product, but also ofafter sales service, quality of management, thecompany itself and the human being. This has theeffect that:
1. Product quality is improved and becomesuniform. Defects are reduced.
2. Reliability of goods is improved.
3. Cost is reduced.
4. Quantity of production is increased, and itbecomes possible to make rational productionschedules.
5. Wasteful work and rework are reduced.
-
7/30/2019 TQM DERS 3
40/52
1. Technique is established and improved.
2. Expenses for inspection and testing are reduced.
3. Contracts between vendor and vendee arerationalised.
4. The sales market is enlarged.
5. Better relationships are established between
departments.6. False data and reports are reduced.
7. Discussions are carried out more freely anddemocratically.
8. Meetings are operated more smoothly.9. Repairs and installation of equipment and facilitiesare done more rationally.
10. Human relations are improved.
-
7/30/2019 TQM DERS 3
41/52
Quality Circles
One major characteristic of Japanese Company-
Wide Quality Control is the Quality Control Circle
Movement started in 1962, with the first circlebeing registered with the Nippon Telegraph and
Telephone Public Corporation. Starting in industry
in Japan, these have now spread to banks and
retailing, and been exported world-wide. Successin the West has not been so extensive as in Japan.
-
7/30/2019 TQM DERS 3
42/52
Quality CirclesThe nature and role of quality circles varies betweencompanies. In Japan a quality circle is a typically voluntarygroup of some 5-10 workers from the same workshop, who
meet regularly and are led by a foreman, assistant foreman,work leader or one of the workers. The aims of the qualitycircle activities are:
1. To contribute to the improvement and developmentof the enterprise.
2. To respect human relations and build a happyworkshop offering job satisfaction.
3. To deploy human capabilities fully and draw outinfinite potential.
-
7/30/2019 TQM DERS 3
43/52
Quality CirclesThe members of the circle have mastered statistical qualitycontrol and related methods and all utilise them to achievesignificant results in quality improvement, cost reduction,
productivity and safety. The seven tools of quality controlare taught to all employees:
1. Pareto charts
2. Cause and effects diagrams
3. Stratification
4. Check sheets
5. Histograms
6. Scatter diagrams
7. Shewhart's control charts and graphs.
-
7/30/2019 TQM DERS 3
44/52
All members of the circle are continuously
engaged in self-and-mutual development,
control and improvement wheneverpossible, the circles implement solutions
themselves, otherwise they put strong
pressure on management to introduce them.Since management are already committed to
the circles, it is ready to listen or act. Circle
members receive no direct financial reward
for their improvements.
-
7/30/2019 TQM DERS 3
45/52
Genichi TaguchiIn the early 1970s Taguchi developed theconcept of the Quality Loss Function. He
published two other books in the 1970s andthe third (current) edition of Design ofExperiments. By the late 1970s Taguchi hadan impressive record in Japan having won
the Deming application prize in 1960 andDeming awards for literature on quality in1951 and 1953.
-
7/30/2019 TQM DERS 3
46/52
Genichi TaguchiTaguchi breaks down off-line quality
control into three stages:
v System design.
v Parameter design.
v Tolerance design.
-
7/30/2019 TQM DERS 3
47/52
Following his 1980 visit to the UnitedStates, more and more American
manufacturers implemented Taguchi'smethodology. Despite an adverse reactionamong American statisticians at themethods, and possibly at the way they were
being marketed, major US companiesbecame involved in the methods includingXerox, Ford and ITT.
-
7/30/2019 TQM DERS 3
48/52
Taguchi methodology is concerned with the
routine optimisation of product and process priorto manufacture, rather than emphasising the
achievement of quality through inspection. Instead
concepts of quality and reliability are pushed back
to the design stage where they really belong. Themethod provides an efficient technique to design
product tests prior to entering the manufacturing
phase. However, it can also be used as a trouble-
shooting methodology to sort out pressing
manufacturing problems.
-
7/30/2019 TQM DERS 3
49/52
LOSS FUNCTION
-
7/30/2019 TQM DERS 3
50/52
Deming PrizeInstituted 1951 by Union of JapaneseScientists and Engineers (JUSE)
Several categories including prizes forindividuals, factories, small companies,and Deming application prize
American company winners include:
Florida Power & Light, and
AT&T Power Systems Division
-
7/30/2019 TQM DERS 3
51/52
Malcolm Baldrige
National Quality Award
Help improve quality in U.S. companies
Recognize achievements of excellent firmsand provide examples to others
Establish criteria for evaluating quality
effortsProvide guidance for other U.S. companies
-
7/30/2019 TQM DERS 3
52/52
Criteria for Performance
ExcellenceLeadership
Strategic Planning
Customer and Market FocusInformation and Analysis
Human Resource Focus
Process Management
Business Results
http://localhost/var/www/apps/QualityManagement/ppt/mbnqa10.mov