TPL INGLESE DIGITALE 2015def v2 - TECSYSTEMPROTECT YOUR INVESTMENT THANKS TO OUR TPL SYSTEM! The...
Transcript of TPL INGLESE DIGITALE 2015def v2 - TECSYSTEMPROTECT YOUR INVESTMENT THANKS TO OUR TPL SYSTEM! The...
NEVER ALONE
The hermetic oil transformers are a type increasingly used in modern distribution networks:
PROTECT YOUR INVESTMENT THANKS TO OUR TPL SYSTEM!
The mission of TECSYSTEM® is, from 35 years,
to offer innovative products for the protection
and monitoring of electrical machines, using
the most current technologies; especially of
transformers of various sizes and power ratings,
are they encapsulated in resin, dry or oil types.
Just by following this philosophy, we have developed
an innovative remote control system for the
protection and monitoring of hermetic oil transformers.
TPL 503 SYSTEM: YOUR HERMETIC TRANSFORMER WILL NEVER BE ALONE!
WHAT IS AN HERMETIC OIL TRANSFORMER?
The use of this type of transformer is an excellent form of
investment, in case of updating of
distribution MV / LV plants.
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
mBAR
Possibility to implement monitoring of the transformer via WEB, through
cloud server for viewing on PC, tablet or Smartphone.
Data transmission for remote control (Modbus RTU).
Parameters and alarms display on the control unit remotely located, without
having access to the cell of the transformer.
Display the oil level on a graduated scale.
Display in mBar of the relative pressure/depression of the transformer, with
double alarm threshold.
Alarms and maximum values reached memory.
Digital oil temperature reading with 1°C accuracy, with double alarm
threshold.
The level of the oil is visible at 360°, thanks to the transparent case of the
sensor.
Drive for a cooling plant, or extracting air from the cabin, with programmable
FAN contact.
Indication of oil loss or gas formation with double alarm threshold.
Signaling of rapid increase of pressure (mbar / sec).
Measurements of temperature, pressure and level according to EN 50216-3
(ed. 2002) + /A2 (ed. 2007).
Compatible mounting with predispositions of traditional devices.
Fast installation.
Absence of mechanical moving parts that may jam or change in presence of
strong magnetic fields.
Case made of transparent material, impact, high temperature and UV rays
resistant.
Tap to bleed the air and the gas collection.
FEATURES AND BENEFITSTPL
OLD
DEVICES
NT210 (K”x” version)
THE TPL 503 SENSOR directly installed on the transformer is able to monitor:
TEMPERATURE, PRESSURE AND LEVEL OF THE OIL
Completely transparent, it offers an excellent level display oil even
at a distance.
The TPL 503 is made with a special material able to work in a
temperature range from - 20°C to + 120°C.
The hermetic seal of the sensor is assured by a test run in immersion.
The sensor data are transmitted via a serial link RS485 to the control
unit NT210, which can be installed directly on the control panel.
THE INNOVATIVE TPL 503 SYSTEM IS A TRUE LEAP QUALITY IN MONITORING DEVICES OF HERMETIC OIL TRANSFORMERS
Relays connection
Power supply 24 ‐240 Vac‐dc
RS485 Modbus RTU connection for: Scada System, PLC and Gateway
TPL 503 Connection
The system NT210 + TPL allows to receive and transmit at a distance (via RS485 Modbus RTU)
the operating parameters of the transformer. It makes available all the measures and any reports of
pre-alarm, release and on / off cooling. The display shows the T-P-L parameters detected without
having to access the cell of the transformer avoiding downtime. The front panel provides quick
access to the memory of the maximum values reached, alarms and parameters of programming.
The LEDs indicate the status of alarms for each measure T-P-L and the selected operating mode
(SCAN-MAN-MAX). The reliability of the system is ensured by a complete self-diagnosis circuit,
able to manage and report abnormalities of the sensor and of the control unit.
Alarms
Source Alarm Time Severity
No active alarms are available for the system
Status Action
Drawing
� Receive information via SMS
or E-MAIL on the state of the
transformer.
�
�
�
Identify the activation of
any alarms.
View the T-P-L parame-
ters in real time.
Monitor the values of alarm
and pre-alarm set on the con-
trol unit.
�
�
�
Acquire and record T-P-L
values (data logging).
Create graphics of the
T-P-L parameters.
Create alarms activations and
abnormal events reports.
WHAT WAS NOT POSSIBLE YESTERDAY, TODAY IS AVAILABLE!
TECSYSTEM® introduces the first WEB monitoring system for hermetic oil transformers. Combining the TPL503
system with Netbiter Argos (EasyConnect 250), we offer the ability to monitor the operation of the transformer from
anywhere in the world, at any time, on PC, Smartphone or Tablet.
The Netbiter Gateway is interfaced with TPL503 system via the serial port RS485 Modbus RTU. The
data transmission to the server is made via Ethernet or mobile phone network (GSM/GPRS).
But what can we really do with this system?
EASY TO CONNECT!
26