TP250 Collapsible Carriage 250 lb. Capacity, 28 ft ...
5
800-241-1806 404-344-0000 Fax 404-349-0401 21 TP250 Collapsible Carriage 250 lb. Capacity, 28 ft. Platform Hoist Ideal for moving shingles, felt, insulation, etc. to those hard to reach locations. This hoist features a 25% increase in lifting capacity over previous models, up to 250 lbs. The new collapsible carriage comes with cam followers for better tracking and handling. Carriage also features an aluminum deck and flap for lighter weight and longer life. A rolled goods/plywood bracket comes with unit and pins into carriage. TP250 TP250/TP400 Base Track Features: • The 4 ft. heavy-duty aluminum base track utilizes laser cut steel tube support plates for job site toughness • Amber colored carriage bumpers to protect against damage and wear from repeated lowering • Oversized cotter pins for fast and simple removal of quick change cable drum and belt replacement • Large cast aluminum feet for added stability • Dual band brake system for smoother stops Quick Assess for Belt Replacement Oversized cotter pins for fast and simple removal of quick change cable drum and belt replacement. TP 250 Platform Lift Hoist - 250 lbs. Capacity Part #60040 28 ft. Hoist with Lifan Gas Engine Part #60041 28 ft. Hoist with Honda Gas Engine Part #60042 28 ft. Hoist with Electric Motor Additional Track Sections Part #10092 4 ft. TranzSporter Track Section Part #10091 8 ft. TranzSporter Track Section
Transcript of TP250 Collapsible Carriage 250 lb. Capacity, 28 ft ...
800-241-1806 404-344-0000 Fax 404-349-0401
21
TP250 Collapsible Carriage250 lb. Capacity, 28 ft. Platform Hoist
Ideal for moving shingles, felt, insulation, etc. to those hard to reach locations. This hoist features a 25% increase in lifting capacity over previous models, up to 250 lbs. The new collapsible carriage comes with cam followers for better tracking and handling. Carriage also features an aluminum deck and flap for lighter weight and longer life. A rolled goods/plywood bracket comes with unit and pins into carriage.
TP250
TP400TP250/TP400 Base Track Features: • The 4 ft. heavy-duty aluminum base track utilizes laser cut steel tube support plates for job site toughness• Amber colored carriage bumpers to protect against damage and wear from repeated lowering• Oversized cotter pins for fast and simple removal of quick change cable drum and belt replacement• Large cast aluminum feet for added stability• Dual band brake system for smoother stops
Quick Assess for Belt Replacement Oversized cotter pins for fast and simple removal of quick
change cable drum and belt replacement.
TP 250 Platform Lift Hoist - 250 lbs. CapacityPart #60040 28 ft. Hoist with Lifan Gas EnginePart #60041 28 ft. Hoist with Honda Gas EnginePart #60042 28 ft. Hoist with Electric MotorAdditional Track SectionsPart #10092 4 ft. TranzSporter Track SectionPart #10091 8 ft. TranzSporter Track Section
TIE DOWN ENGINEERING • www.tranzsporter.com
22
TP400 Collapsible Carriage400 lbs. Capacity, 28 ft. Platform Hoist
For heavier roofing materials, this platform hoist features a 400 lbs. lifting capacity with a lighter weight carriage and revised track system. The TP400 carriage has a 30% reduction in weight over previous model carriage. The aluminum deck and flap provide longer life and lighter weight. This carriage also features a re-engineered andsimplified cam follower system with less wear parts than former hoists. Rolledgoods/plywood brackets comes included and pins into carriage.
TP250
TP400
Dual Drum Brakes Dual band brake system for smoother stops.
Plywood BracketsBrackets are on each side. When not in use the brackets
are stored flat with the collapsible carriage.
TP 400 Platform Lift Hoist - 400 lbs. CapacityPart #60043 28 ft. Hoist with Lifan Gas EnginePart #60044 28 ft. Hoist with Honda Gas EnginePart #60045 28 ft. Hoist with Electric MotorAdditional Track SectionsPart #10092 4 ft. TranzSporter Track SectionPart #10091 8 ft. TranzSporter Track Section
800-241-1806 404-344-0000 Fax 404-349-0401
23
Engine/Motor Options
4.0 hp Lifan Gas Engine (Standard)• Low Oil Shut Down System - Prevents damage to engine due to insufficient oil in engine• Fuel Shut Off Valve - Protects engine during transportation• Forced Splash Lubrication System• Electronic Transistorized Ignition• Auto Decompression - For easier pull starting• Overhead Valve - For longer engine life• Industrial grade components• Fuel efficient for longer run times• CARB and EPA certifiedPart #60040 TP250/28 ft. Hoist with Lifan Gas EnginePart #60043 TP400/28 ft. Hoist with Lifan Gas Engine
4.0 hp Honda Gas Engine• Fuel efficient, high output operation - Overhead valve, precision camshaft design offers precise valve timing and optimal valve overlap• Smooth performance - Precision engineered components result in lower vibration• Exceptionally quiet - Large capacity multi-chamber exhaust system• Proven reliability - Low oil shutdown, cast iron cylinder sleeve, and high quality materials, fit and finish• CARB and EPA certifiedPart #60041 TP250/28 ft. Hoist with Honda Gas EnginePart #60044 TP400/28 ft. Hoist with Honda Gas Engine
1.0 hp High Torque Electric Motor1.0 hp, 12.8 amps, 115 Volt High Torque Leeson Electric MotorComes with GFCI ground-fault circuit interrupter forsafer operation.Part #60042 TP250/28 ft. Hoist with Electric MotorPart #60045 TP400/28 ft. Hoist with Electric Motor
The all new motor base is manufactured using laser cut steel tubing for extra strength and durability; both belt guard and foot pedal are detailed with aluminum diamond plate.
Each engine mount includes a welded on steel tube withred end caps. The tube is clearly labeled and enclosed in thetube is the owners manual with detailed operating instruction.
TIE DOWN ENGINEERING • www.tranzsporter.com
24
Solar/Plywood Panel Saddle Carriage Allows lifting of up to four solar panels or plywood sheets.
Unique design allows panels to roll off towards thecontractor, preventing leaning while on the roof top.
Requires roof top anchoring; straps included(#13809). Solar/Plywood Panel Brackets(#48467) attach to TP400
carriage frame. Solar/Plywood Panel Bracket Kit #48469 is a complete carriage system for use with the TP250, which includes: carriage, cable, cable drum and solar/plywood brackets. Both TP250/400 models require a Secondary
Handle Kit #48468 when used with Solar/PlywoodBrackets (not included).
Secondary Handle Kit Allows use of a left side handle to engage the motor and carriage. It is required when using with the Solar/Plywood Saddle Carriage. Includes all hardware brackets and handle. Can be used for both TP250 & TP400 models.
Telescopic Support Brace Used with TP250 & TP400
models over 28 ft.
Part # Hoist Accessories 48467 TranzSporter Solar/Plywood Panel Accessory48469 Complete Solar Carrier for TP25048468 Secondary Handle Kit for TP250 & TP40010092 4 ft. TranzSporter Track Section for TP250 and TP40010091 8 ft. TranzSporter Track Section for TP250 and TP40060005 Telescopic Support Brace for TP250 and TP40048599 TranzSporter Stand-Off/Stabilizer
TP250
TP400HoistAccessories
Stand-Off/StabilizerThis unique stabilizer attaches to the platform hoist track section allowing proper stand-off from roof and gutter. Helps prevent costly gutter damage when placed directly on roof. Assembly required.
800-241-1806 404-344-0000 Fax 404-349-0401
25
TP250
TP400HoistReplacement Parts
Brake KitPart #90007 Kit Includes: Lock Nut, Eye Bolt,Spring, Cotter Pins, Linkage & Brake Strap
TP-250Complete Carriage Wheel KitPart #90040Kit Includes:1/2-13 x 2-3/4” Zinc Bolts (2) 1/2” Lock Washers (2) 1/2” Washers (4) Carriage Wheels (2)
TP-400Complete Carriage Wheel KitPart #90048Kit Includes:Carriage Bolts (2) Washers (2) Carriage Wheels (2)Jam Nut (2)
TP 250 Complete Drum AssemblyKit Includes:Brake Drums, Cable Drum,Bearings and Cable #48493ACable Only 100’ x 5/32” #90010
TP 400 Complete Drum AssemblyKit Includes:Brake Drums, Cable Drum,Bearings and Cable #48493A-400Cable Only 130’ x 3/16” #90034
Drive Belt (51” V-Belt) #10047
Splice Plate KitKit Includes:Splice Plates (2), Bolts (8)& Keeper Nuts (8) #90025Nuts and Bolts only (16 ea.) #90024
