Touchless Extraction System - Ferotex · Touchless Extraction System Stationary system for cars...
Transcript of Touchless Extraction System - Ferotex · Touchless Extraction System Stationary system for cars...
Touchless Extraction SystemStationary system for cars with all types of exhaust pipes
Easy to handle systems for all types of cars. Consists of abasic rail system which is completed with an touchlessextraction unit. Very high extraction efficiency. One extraction unit can serve several work bays. Extraction units are easy to move, thanks to light-weight material and ball bearing wheels.Designed to minimize risk of damaging the car. Two units serve cars with twin exhaust pipes.
Touchless – no scraping• Universal – for all types of exhaust pipes• Versatile – for cars on the floor or lifted• Ergonomic – easy to maneuver and move between workstations • Safe – no equipment on the floor• Practical – out of the way when not in use• Low maintenance cost – • no hoses or other parts on the floor to be damaged
Touchless extraction system
Rail kit 920*Length,
mLength,
ftPart no.
2.5 8.2 209160205 16.4 20916120
7.5 24.6 2091622010 32.8 20916320
12.5 41 2091642015 49.2 20916520
17.5 57.4 2091662020 65.6 20916720
Configuration Part no.Including 1500 trolley 20808064Excluding 1500 trolley 20808164
* Complete with suspension parts, joint connectors, rubber seals, end covers and end stops. For rail lengths > 50 m, please contact your local Nederman dealer.
Length, m
Length, ft
Part no.
22.5 73.8 2091682025 82 2091692027.5 90.2 2091702030 98.4 2091712035 114.8 2091722040 131.2 2091732045 147.6 2091742050 164 20917520
Technical leaflet 980032 2
Date2010-07-07
Rail 920 pressure drop
A= Top connection, Ø200 mmB= Side connection, Ø160 mmC= Rail 920, per metre
A
B
C
Pres
sure
dro
p Pa
Air flow m³/h
Pressure drop Telescope including trolley
D= Touchless extraction including trolleyPressure drop approximately 55% less than corresponding system with hose
Touchless Extraction System/ For stationary vehicles
Airflow recommendationsCar: 600 m³/h (350 cfm)
Airflow CFM
600 900 1200 1500300
Pres
sure
dro
p in
W.C
1
2
3
4
Pres
sure
dro
p in
W.C
1
2
3
4
Air flow m³/h
Pres
sure
dro
p Pa
D
200 400 600 800 1000
500
100
200
300
400
1000
600
700
800
900
200 300 500100 400
Airflow CFM
Working area
Vertical x horizontal: 2 x 1m (6x3’)Floor clearance when in parking position: 1,95 m (6’)
MountingA = 2.8 m recommended distance for for normal carsB = 4.1 m (± 0.1 m)
Technical Data
Environmental dataSound level The product, excluding fan, does not generate any
sound.
Recycling level 100 %
Energy consumption
The product, excluding fan, does not consume any energy.
Touchless Extraction System/ For stationary vehicles
Functional description
Automatic damperShuts the air flow when the unit is in parking position
Parking position
Rail 920Trolley 1500
BalancerMakes the Telescopic tube weightless when adjusting length of the Telescope
Exhaust hood
Joint release buttonFor easy and secure positioning
Touchless extraction unit Exhaust hood EPDM
Arm Ø100mm (4”) Aluminium
Joints Poly Amid
Telescopic section Aluminium
Trolley Glass-fibre composite
8 running wheels4 guide wheels (all with sealed ball bearings
Resistant to all chemicals in diesel and petrol exhaust
Rail 920Rail profile Aluminium, extruded, hardened, non-corrosive
Sealing lips EPDM rubber, profiled, with inner low-friction layer, delivered in coils according to track length
End cover Glass-fibre composite. Lid of galvanized sheet metal
Brackets Sheet metal, galvanizedWith 100 mm (4”) threaded rods for alignment
Crossection area 230 cm² (36 in²)
Temp. resistance Continuous 150 ºC (302°F)Intermittent 180 ºC (356°F)
Weight Complete extraction unitRail incl sealing lips
37 kg (81 lbs)6.7 kg/m (5 lb/ft)
www.nederman.com
Attach brackets to suitable suspension devices.• Assemble rail sections on the floor.• Lift rail sections and “click” them on to the brackets. • Align rail horizontally with included threaded rods.• Slide the complete extraction unit into the rail.•
Quick and easy to mount
Side connection up to 1200 m3/hThe end cover without lid can be used to connect the ducting to the fan. Connection Ø 160 mm (6,4 ‘‘) in sheet metal, is available.
For more than 2400 m3/h Top connection with two or more cones (option). Connection Ø 200 mm (8’’).
Top connection up to 2400 m3/h A connection cone (accessory) is mounted on top of the rail. Connection Ø 200 mm (8’’). A hole for the cone, size 85 x 450 mm (3.3’’ x 17.7’’), must be made in the rail.
Fan connection alternativesDepending on length of rail and number of extraction units on the rail, there are different connection alternatives and fans to choose. It is recommended that the fan is placed outdoors to give negative pressure in all indoor ducting.
Max 1.25 m (4’’)
Max 5 m (16’’)
Touchless Extraction System/ For stationary vehicles
Accessories Part no.
Top connection outlet Ø 200 mm 20374246
Adjustable suspension 20375375
Fan: See separate Technical Leaflet
Rail mounting height: 4 m (13’’)