MICRO CONTROLLER

TOUCH SCREEN

POWER SUPPLY LCD

DRIVER MOTORDRIVER

MOTOR

Embedded systems Ph:7842522786 9948887244

TOUCH SCREEN BASED WHEEL CHAIR IMPLEMENTATION

AIM:

The main aim of this project is to design a remote vehicle system which is operated through

touch screen.

PURPOSE:

The purpose of the project is to implement a remote vehicle system i.e., directions of the vehicle

are controlled through the touch screen which is connected the controller.

BLOCK DIAGRAM:

skesystems@gmail.com Vijayawada Hyderabad Page 1

Embedded systems Ph:7842522786 9948887244

DESCRIPTION:

In this project, there are two sections (transmitter & receiver) as shown in the block diagrams.

The instructions such as Left, Right etc are processed and are given by the person by operating touch

screen. So based upon input of touch screen the following output will be seen i.e. left or right. In

Transmitter Section, the instructions are delivered through touch screen from microcontroller

SOFTWARES:

1. Embedded C

2. Keil IDE

3. Uc-Flash

HARDWARES:

1. Micro Controllers

2. Power Supply

3. Touch screen

4. Motor diver(L293D)

5. Motors (GEARED MOTOR)

6. LCD

RESULT:

According to this project we can implement a system in which a vehicle direction can be

controlled wirelessly with respect to the commands given by the user through touch screen

using ZIGBEE technology.

skesystems@gmail.com Vijayawada Hyderabad Page 2

Embedded systems Ph:7842522786 9948887244

skesystems@gmail.com Vijayawada Hyderabad Page 3