Toroidal Current Transformers
of 115
-
Upload
joluisconga -
Category
Documents
-
view
78 -
download
1
Transcript of Toroidal Current Transformers
-
5/23/2018 Toroidal Current Transformers
1/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-
Toroidal Current Transformers...Traditional, window type current transformer for measuring 50-400HZ currents of 10A to15000A with secondaries of .1A, 1A, and 5A (special secondary currents are available).W.I.C.C. manufactures toroidal designs having inside diameters of up to 8.00. Manymodels are available as U.L. Recognized devices.
Typical applications include UPS systems, transfer switches, motor-generator sets,commercial sub-metering, and motor-drive systems.
REV 18DEC00
Model A. ................................. 1-2Model AA ................................ 1-4Model AX ................................ 1-6Model C ... ...............................1-8Model CX ...............................1-10Model D .1-12Model DE ..1-14
Model DX ..1-16Model E .1-18Model F .1-20Model K .1-22Model L595 ...1-24Model MW .1-26Model MWX ..1-28Model N .1-30Model ND ..1-32Model NDX ...1-34Model 546 .1-38
Model 591 .1-40Model 594 .1-42Model 599 .1-44Model 617 .1-46Model 635 .1-48Model 636 .1-50Model 652 .1-52
Model 652F ..1-54Model 653 .1-56Model 653F ..1-58Model 653X ..1-60Model 653FX 1-62Model 1306 ...1-64Model 2559 ...1-66Model 2560 ...1-68Model 2562 ...1-70Model 2638 ...1-72Model 2743 ...1-74
Table of Contents(alphabetical)
-
5/23/2018 Toroidal Current Transformers
2/115
PAGE No 1-1
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
0.38" (Model 2638) ..........1-720.53" (Model 1306) ...1-640.75" (Model L595) ...1-241.10" (Model 546) .1-381.10" (Model 635) .1-481.10" (Model 636) .1-501.10" (Model 2559) ..1-661.50" (Model D) .....1-121.50" (Model DE) ..1-141.50" (Model DX) ..1-161.56" (Model 2560) ...1-68
2.06" (Model 2562) ...1-702.06" (Model 2743) ...1-742.25" (Model A) ........................... 1-22.25" (Model AA) ..................... 1-42.25" (Model AX) ..................... 1-62.25" (Model 591) .1-402.50" (Model 652) .1-52
2.50" (Model 652F) ..1-542.50" (Model 653) .1-562.50" (Model 653F) ..1-582.50" (Model 653X) ..1-602.50" (Model 653FX) 1-622.60" (Model 599) .1-442.75" (Model 594) .1-422.88" (Model C) ........................1-82.88" (Model CX) ....................1-103.50" (Model MW) ....1-263.50" (Model MWX) ..1-28
4.25" (Model N) .1-304.25" (Model ND) ..1-324.25" (Model NDX) ...1-345.00" (Model E) .1-186.25" (Model K) .1-226.50" (Model 617) .1-468.00" (Model F) .1-20
Table of Contents(by window I.D.)
REV 18DEC00
-
5/23/2018 Toroidal Current Transformers
3/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 1500:5A,1.15 @ 30C for ratios above 1500:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL 1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B1 and B31 brackets. See Bracket Data Sectiondimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL A2.25" I.D
REV 14DEC00
1.08 1.00
3.88
4.40
4.63
LEAD WIRE OPTION
UL 1015 #16 AWG LEAD WIR
STANDARD LENGTH IS 24"
5.022.25
NOTE:
1) ALL DIMENSIONS IN INCHES
2) ALL DIMENSIONS REF ONLY
TERMINAL OPTION
0.25 x 0.50 SLOT
( 2 PLACES )
OPTIONAL B3 MOUNTING
BRACKET
8-32 BRASS STUD (2 PLACES)
2.46
POLARITY LABEL (H1)
-
5/23/2018 Toroidal Current Transformers
4/115
PAGE No 1-3
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL A at 60HZ
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
A-200-00-xxxA-250-00-xxxA-300-00-xxxA-400-00-xxxA-500-00-xxx
A-600-00-xxxA-750-00-xxxA-800-00-xxx
A-1000-00-xxxA-1200-00-xxxA-1500-00-xxx
200:5A250:5A300:5A400:5A500:5A
600:5A750:5A800:5A1000:5A1200:5A1500:5A
1.01.01.01.01.0
1.01.01.01.01.01.0
2.03.04.54.06.5
7.512.512.517.52230
0.020.050.060.110.13
0.150.180.200.250.300.39
CURRENT TRANSFORMER
MODEL A2.25" I.D.
REV 14DEC00
400:5A
500:5A
750:5A
12
00:5A
100
0:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
1500
:5A
-
5/23/2018 Toroidal Current Transformers
5/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 1500:5A,1.15 @ 30C for ratios above 1500:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL 1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is steel with black oxide finish
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL AA2.25" I.D
REV 14DEC00
0.28 x 0.50 SLOTS
(2 PLACES)
NOTE:
2) ALL DIMENSIONS REF ONLY
UL1015 #16 AWG LEAD WIRE
STANDARD LEAD LENGTH IS 24"
(2 PLACES)0.22
TERMINAL OPTION LEAD WIRE OPTION
1.081.48
1.90
2.00
4.384.752.25
1) ALL DIMENSIONS IN INCHES
2.50
3.63
4.40
OPTIONAL B12 MOUNTING
BRACKET
POLARITY LABEL
3.09
-
5/23/2018 Toroidal Current Transformers
6/115
PAGE No 1-5
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10
-4
10
-3
10
-2
10
-1
10
0
10
1
EXCITATION CURRENT (amp)
TYPICAL EXCITATION CURVE FOR WICC MODEL AA at 60HZ
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
AA-200-00-xxxAA-250-00-xxxAA-300-00-xxxAA-400-00-xxxAA-500-00-xxx
AA-600-00-xxxAA-750-00-xxxAA-800-00-xxxAA-1000-00-xxxAA-1200-00-xxxAA-1500-00-xxx
200:5A250:5A300:5A400:5A500:5A
600:5A750:5A800:5A1000:5A1200:5A1500:5A
1.01.01.01.01.0
1.01.01.01.01.01.0
2.03.04.54.06.5
7.512.512.517.52230
0.020.050.060.110.13
0.150.180.200.250.300.39
CURRENT TRANSFORMER
MODEL AA2.25" I.D.
REV 14DEC00
400:5A
500:5A
750:5A
12
00:5A
10
00:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
1500
:5A
-
5/23/2018 Toroidal Current Transformers
7/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL 1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #18 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B1 and B31 brackets. See Bracket Data Sectiondimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL AX2.25" I.D
REV 14DEC00
1.08 1.00
3.88
4.40
4.63
LEAD WIRE OPTION
UL 1015 #16 AWG LEAD WIR
STANDARD LENGTH IS 24"
5.022.25
NOTE:
1) ALL DIMENSIONS IN INCHES
2) ALL DIMENSIONS REF ONLY
TERMINAL OPTION
0.25 x 0.50 SLOT
( 2 PLACES )
OPTIONAL B3 MOUNTING
BRACKET
8-32 BRASS STUD (2 PLACES)
2.46
POLARITY LABEL (H1)
-
5/23/2018 Toroidal Current Transformers
8/115
PAGE No 1-7
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-3
10-2
10-1
100
101
102
INDUCE
D
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL AX at 60HZ
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
AX-050-00-xxxAX-100-00-xxxAX-150-00-xxxAX-600-00-xxx
50:5A100:5A150:5A600:5A
5.02.01.51.0
1.02.02.030
0.010.020.040.14
CURRENT TRANSFORMER
MODEL AX2.25" I.D.
REV 14DEC00
50:5A
10
0:5A
1
50:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
600:5A
-
5/23/2018 Toroidal Current Transformers
9/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 1600:5A, 1.15@ 30C for ratios above 1600:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional plate is XX phenolic, optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B1 and B31 brackets. See Bracket Data Sectiondimensions.
Available with B54 bracket when ratio is above 500:5A. See BrData Section for dimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL C2.88" I.D
REV 14DEC00
2.88
OPTIONAL P8 PLATEOPTIONAL B3 BRACKET
TERMINAL OPTION LEAD WIRE OPTION
2.95
6.03
POLARITY LABEL (H1)
3.88
4.63
5.35
8-32 BRASS STUD (2 PLACES)
0.25 x 0.50 SLOT(2 PLACES)
1.00
1.13
UL 1015 #16 AWG LEAD WIRE,
STANDARD LENGTH IS 24"
0.25(4 PLACES)
1.31
5.38
4.38
4.38 5.38
2). ALL DIMENSIONS REF ONLY1). ALL DIMENSIONS IN INCHESNOTES
-
5/23/2018 Toroidal Current Transformers
10/115
PAGE No 1-9
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
10-3
10-2
10-1
100
101
102
INDUCE
D
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL C at 60HZ
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
C-200-00-xxxC-250-00-xxxC-300-00-xxxC-400-00-xxxC-500-00-xxx
C-600-00-xxxC-800-00-xxx
C-1000-00-xxxC-1200-00-xxxC-1500-00-xxxC-1600-00-xxxC-1800-00-xxxC-2000-00-xxx
200:5A250:5A300:5A400:5A500:5A
600:5A800:5A1000:5A1200:5A1500:5A1600:5A1800:5A2000:5A
1.51.01.01.01.0
1.01.01.01.01.01.01.01.0
2.02.03.07.010
1220253035303035
0.060.080.090.120.14
0.150.200.250.300.400.430.500.60
CURRENT TRANSFORMER
MODEL C2.88" I.D.
REV 14DEC00
200:5A
300:5A
400:5A
500:5A
800:5A
1000:5
A
15
00:5A
2000
:5A
1200
:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
-
5/23/2018 Toroidal Current Transformers
11/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-1
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional plate is XX phenolic, optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B1 and B31 brackets. See Bracket Data Sectiondimensions.
Available with B54 bracket when ratio is above 500:5A. See BrData Section for dimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL CX2.88" I.D
REV 14DEC00
2.88
OPTIONAL P8 PLATEOPTIONAL B3 BRACKET
TERMINAL OPTION LEAD WIRE OPTION
2.95
6.03
POLARITY LABEL (H1)
3.88
4.63
5.35
8-32 BRASS STUD (2 PLACES)
0.25 x 0.50 SLOT
(2 PLACES)
1.00
1.13
UL 1015 #16 AWG LEAD WIRE,
STANDARD LENGTH IS 24"
0.25(4 PLACES)
1.31
5.38
4.38
4.38 5.38
2). ALL DIMENSIONS REF ONLY1). ALL DIMENSIONS IN INCHESNOTES
-
5/23/2018 Toroidal Current Transformers
12/115
PAGE No 1-11
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL CX at 60HZ
10-4
10-3
10-2
10-1
100
101
INDUC
ED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
CX-100-00-xxxCX-150-00-xxx
100:5A150:5A
5.02.5
2.02.0
0.010.02
CURRENT TRANSFORMER
MODEL CX2.88" I.D.
REV 14DEC00
1
00:5A
15
0:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
-
5/23/2018 Toroidal Current Transformers
13/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-1
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B3 bracket. See Bracket Data Section fordimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL D1.50" I.D
REV 14DEC00
TERMINAL OPTION LEAD WIRE OPTION
1.38 1.00
4.63
3.88
3.58
3.754.16H1
X1
0.25 x 0.50 SLOTS
( 2 PLACES )
UL1015 #16 AWG LEAD WIR
STANDARD LENGTH IS 24"
H1
X1
NOTE:
1) ALL DIMENSIONS IN INCHES
2) ALL DIMENSIONS REF ONLY
1.50
OPTIONAL B3 MOUNTING
BRACKET
-
5/23/2018 Toroidal Current Transformers
14/115
PAGE No 1-13
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
100
101
10-1
EXCITING CURRENT (amp)
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL D at 60HZ
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
D-300-00-xxxD-400-00-xxxD-500-00-xxxD-750-00-xxxD-800-00-xxx
D-1000-00-xxxD-1200-00-xxx
300:5A400:5A500:5A750:5A800:5A
1000:5A1200:5A
1.01.01.01.01.0
1.01.0
5.07.512.515
17.5
2020
0.080.100.130.180.19
0.240.27
CURRENT TRANSFORMER
MODEL D1.50" I.D.
REV 14DEC00
300:5A
400:5A
500:5A
10
00:5A
750
:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
-
5/23/2018 Toroidal Current Transformers
15/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-1
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is steel with black oxide finish
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL DE1.50" I.D
REV 14DEC00
NOTE:1) ALL DIMENSIONS IN INCHES2) ALL DIMENSIONS REF ONLY
H1
X1H1
X1
TERMINAL OPTION LEAD WIRE OPTION
1.38
2.69
3.58
0.28 x 0.50 SLOTS( 2 PLACES )
1.67
3.724.031.50
2.240.22
UL1015 #16 AWG LEAD WIRSTANDARD LENGTH IS 24"
OPTIONAL B22 MOUNTINGBRACKET
(2 PLACES)
3.45
1.772.18
-
5/23/2018 Toroidal Current Transformers
16/115
PAGE No 1-15
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITATION CURRENT (amp)
TYPICAL EXCITATION CURVES FOR WICC MODEL DE at 60HZ
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
DE-300-00-xxxDE-400-00-xxxDE-500-00-xxxDE-750-00-xxxDE-800-00-xxx
DE-1000-00-xxxDE-1200-00-xxx
300:5A400:5A500:5A750:5A800:5A
1000:5A1200:5A
1.01.01.01.01.0
1.01.0
5.07.512.515
17.5
2020
0.080.100.130.180.19
0.240.27
CURRENT TRANSFORMER
MODEL DE1.50" I.D.
REV 14DEC00
300:5A
400:5A
500:5A
10
00:5A
750
:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
-
5/23/2018 Toroidal Current Transformers
17/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-1
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B3 bracket. See Bracket Data Section fordimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL DX1.50" I.D
REV 14DEC00
TERMINAL OPTION LEAD WIRE OPTION
1.38 1.00
4.63
3.88
3.58
3.754.16H1
X1
0.25 x 0.50 SLOTS
( 2 PLACES )
UL1015 #16 AWG LEAD WIR
STANDARD LENGTH IS 24"
H1
X1
NOTE:
1) ALL DIMENSIONS IN INCHES
2) ALL DIMENSIONS REF ONLY
1.50
OPTIONAL B3 MOUNTING
BRACKET
-
5/23/2018 Toroidal Current Transformers
18/115
PAGE No 1-17
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
EXCITING CURRENT (amp)
101
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL DX at 60HZ
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
DX-050-00-xxxDX-075-00-xxxDX-100-00-xxxDX-150-00-xxxDX-200-00-xxx
DX-250-00-xxx
50:5A75:5A
100:5A150:5A200:5A
250:5A
3.02.01.51.01.0
1.0
1.52.52.52.54.0
5.0
0.010.010.020.030.05
0.06
CURRENT TRANSFORMER
MODEL DX1.50" I.D.
REV 14DEC00
50:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
100:5A
75:5A
150:5A
2
50:5A
-
5/23/2018 Toroidal Current Transformers
19/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-1
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up thru 5000:5A, 1.15@ 30C for ratios above 5000:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, colblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (lead wires only, physical sizeincreases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Screw Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL E5.00" I.D
REV 14DEC00
5.00
0.751.50
6.75 8
6.75
8.50
4.11
8.20
5.75
7.00
7.44
1.75
UL 1015 #16 AWG LEAD WIRESTANDARD LENGTH IS 24"
8-32 BRASS SCREWTERMINAL (2 PLACES)
SCREW CLAMPFOR SS BAND
OPTIONAL B1
BRACKET
0.25 x 0.50 SLOT(2 PLACES)
0.31
(4 PLACES)
OPTIONAL P3MOUNTING
PLATE
SS BAND SECURES BRACKET
(view of screw clamp band omitted for clarity)
TERMINAL OPTION LEAD WIRE OPTION
POLARITY LABEL
(2 PLACES)
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
-
5/23/2018 Toroidal Current Transformers
20/115
PAGE No 1-19
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL E at 60HZ
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
103
*"xxx" describes termination: "T" FOR BRASS SCREW TERMINALS, "Lyyy" FOR LEADWIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
E-500-00-xxxE-600-00-xxxE-800-00-xxxE-1000-00-xxx
E-1200-00-xxxE-1500-00-xxxE-1600-00-xxxE-2000-00-xxxE-2500-00-xxxE-3000-00-xxxE-4000-00-xxxE-5000-00-xxxE-6000-00-xxx
500:5A600:5A800:5A1000:5A
1200:5A1500:5A1600:5A2000:5A2500:5A3000:5A4000:5A5000:5A6000:5A
1.01.01.01.0
1.01.01.01.01.01.01.01.01.0
8.512.52540
60808595
135165130165190
0.170.210.280.35
0.410.520.550.700.901.101.251.652.45
CURRENT TRANSFORMER
MODEL E5.00" I.D.
REV 14DEC00
500:5A
600:5A
800:5A
1000
:5A
1
200:5A
1500
:5A
2500:
5A
3000
:5A
2000
:5A
5000
:5A
6000
:5A
-
5/23/2018 Toroidal Current Transformers
21/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-2
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up thru 7500:5A, 1.15@ 30C for ratios above 7500:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, colblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (lead wires only, physical sizeincreases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Screw Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL F8.00" I.D
REV 14DEC00
TERMINAL OPTION LEAD WIRE OPTION
NOTES1). ALL DIMENSIONS IN INCHES2). ALL DIMENSIONS REF ONLY
8.00
5.75
7.00
0.75
1.13
SS BAND SECURES BRACKET(view of screw clamp band omitted for clarity)
0.25 X 0.50 SLOT
(2 PLACES)8-32 BRASS SCREW
TERMINAL (2 PLACES)
POLARITY LABEL(2 PLACES)
OPTIONAL B1
BRACKET SCREW CLAMP
FOR SS BAND
5.57
11.06
OPTIONAL
MOUNTING
PLATE
0.50
(4 PLACES)
8.50
10.00
8.50 1
1.5
UL 1015 #16 AWG LEAD WSTANDARD LENGTH IS 24
10.19
-
5/23/2018 Toroidal Current Transformers
22/115
PAGE No 1-21
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL F at 60HZ
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
10
-4
10
-3
10
-2
10
-1
10
0
10
1
EXCITING CURRENT (amp)
*"xxx" describes termination: "T" FOR BRASS SCREW TERMINALS, "Lyyy" FOR LEADWIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
F-500-00-xxxF-750-00-xxxF-1000-00-xxxF-1500-00-xxx
F-2000-00-xxxF-3000-00-xxxF-5000-00-xxxF-8000-00-xxx
500:5A750:5A1000:5A1500:5A
2000:5A3000:5A5000:5A8000:5A
1.01.01.01.0
1.01.01.01.0
4.0102050
6585
100100
0.100.150.350.46
0.550.801.402.60
CURRENT TRANSFORMER
MODEL F8.00" I.D.
REV 14DEC00
500:5A
750:5A
1000
:5A
1500
:5A
2000
:5A
3000
:5A
5000
:5A
8000:5A
-
5/23/2018 Toroidal Current Transformers
23/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-2
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up thru 4000:5A, 1.15@ 30C for ratios above 4000:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, colblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (lead wires only, physical sizeincreases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Screw Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL K6.25" I.D
REV 14DEC00
0.75
5.75
7.00
8-32 BRASS SCREWTERMINAL (2 PLACES)
SCREW CLAMP
FOR SS BANDOPTIONAL B1
BRACKET
0.25 x 0.50 SLOT
(2 PLACES)
SS BAND SECURES BRACKET(view of screw clamp band omitted for clarity)
TERMINAL OPTION LEAD WIRE OPTION
POLARITY LABEL(2 PLACES)
NOTES1). ALL DIMENSIONS IN INCHES2). ALL DIMENSIONS REF ONLY
STANDARD LENGTH IS 24"UL 1015 #16 AWG LEAD WIRE
6.75 8
6.75
8.50
0.39
(4 PLACES)
OPTIONAL P5
MOUNTINGPLATE
6.25
4.56
9.06
1.55
1.31
8.25
-
5/23/2018 Toroidal Current Transformers
24/115
PAGE No 1-23
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL K at 60HZ
*"xxx" describes termination: "T" FOR BRASS SCREW TERMINALS, "Lyyy" FOR LEADWIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
K-500-00-xxxK-750-00-xxx
K-1000-00-xxxK-1200-00-xxx
K-1500-00-xxxK-2000-00-xxxK-3000-00-xxxK-4000-00-xxxK-5000-00-xxxK-6000-00-xxx
500:5A750:5A1000:5A1200:5A
1500:5A2000:5A3000:5A4000:5A5000:5A6000:5A
1.01.01.01.0
1.01.01.01.01.01.0
6.0152540
65857590
115135
0.120.180.350.40
0.500.650.901.201.802.20
CURRENT TRANSFORMER
MODEL K6.25" I.D.
REV 14DEC00
500:5A
750:5A
1000
:5A
1200
:5A
1500
:5A
2000
:5A
40
00:5A
5000
:5A
300
0:5A
6000
:5A
-
5/23/2018 Toroidal Current Transformers
25/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-2
Secondary sources 0.1 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is steel
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1 and 0.2 A output at F.S. primary amperage. Other non-standardratings also available
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL L5950.75" I.D
REV 15DEC00
UL1015 #20 AWG LEAD WIRE,
NOTES:1) ALL DIMENSIONS IN INCHES2) ALL DIMENSIONS REF ONLY
0.75
2.25
0.75
STANDARD LENGTH IS 24"
POLARITY LABEL (H1)
0.63
1.25 1.75
0.19 (2 PLACES)
OPTIONAL B25 BRACKET 0.04
-
5/23/2018 Toroidal Current Transformers
26/115
PAGE No 1-25
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL L595 at 60HZ
10-5
10-4
10-3
10-2
10-1
100
EXCITING CURRENT (amp)
10-3
10-2
10-1
100
101
102
INDUCE
D
VOLTAGE
(volt)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (ohm)
NOMINAL WINDINGRESISTANCE (ohm)
L595-025-02-LxxxL595-050-02-LxxxL595-075-02-LxxxL595-100-02-LxxxL595-150-02-Lxxx
L595-200-02-Lxxx
25:0.1A50:0.1A75:0.1A100:0.1A150:0.1A
200:0.1A
2.01.01.01.01.0
1.0
5102550
125
225
2.06.29.62032
45
CURRENT TRANSFORMER
MODEL L5950.75" I.D.
REV 15DEC00
* "Lxxx" describes LEAD WIRE termination where "xxx" is the lead length in inches. Forexample, "L24" represents 24 inch long lead wires.
25:0
.1A
50:0
.1A
100:0.
1A
75:0.
1A
150:0.
1A
200:0.
1A
-
5/23/2018 Toroidal Current Transformers
27/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-2
CURRENT TRANSFORMER
MODEL MW3.50" I.D
REV 15DEC00
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 2000:5A,1.15 @ 30C for ratios of 2000:5A and above
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires.Choice of stud location.
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B3 and B31 brackets. See Bracket Data Sectiondimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
TERMINAL OPTION LEAD WIRE OPTION
UL 1015 #16 AWG LEAD WIRE,STANDARD LENGTH IS 24"
8-32 BRASS STUDS
(2 PLACES)
3.50
5.75
1.15
6.00
0.25x0.5 SLOT
(2 PLACES)
OPTIONAL B1 BRACKET
(4 PLACES)
OPTIONAL P6 PLATE
TOP TERMINAL OPTION
0.75
5.65
1.36
4.65
5.65
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
POLARITY LABEL
5.657.00
3.15
0.25
4.655.65
-
5/23/2018 Toroidal Current Transformers
28/115
PAGE No 1-27
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL MW at 60HZ
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
*"xxx" describes termination: "T" FOR BRASS STUDS, "TT" FOR BRASS STUDS in topterminal configuration, and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length ininches. For example, "L24" represents 24 inch long lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
MW-300-00-xxxMW-400-00-xxxMW-500-00-xxxMW-600-00-xxxMW-800-00-xxx
MW-1000-00-xxxMW-1200-00-xxxMW-1500-00-xxxMW-1600-00-xxxMW-2000-00-xxxMW-2500-00-xxxMW-3000-00-xxxMW-4000-00-xxx
300:5A400:5A500:5A600:5A800:5A
1000:5A1200:5A1500:5A1600:5A2000:5A2500:5A3000:5A4000:5A
1.51.01.01.01.0
1.01.01.01.01.01.01.01.0
2.02.04.06.010
1220151512152545
0.060.080.100.120.17
0.220.250.500.530.670.851.01.4
CURRENT TRANSFORMER
MODEL MW3.50" I.D.
REV 15DEC00
300:5A
400:5A
500:5
A
600:5A
15
00:5A
3000
:5
4000
:5A
-
5/23/2018 Toroidal Current Transformers
29/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-2
CURRENT TRANSFORMER
MODEL MWX3.50" I.D
REV 15DEC00
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
UL and Canadian UL Recognized Component. File E100575
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires.Choice of stud location.
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Available with B3 and B31 brackets. See Bracket Data Sectiondimensions.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
TERMINAL OPTION LEAD WIRE OPTION
UL 1015 #16 AWG LEAD WIRE,STANDARD LENGTH IS 24"
8-32 BRASS STUDS
(2 PLACES)
3.50
5.75
1.15
6.00
0.25x0.5 SLOT
(2 PLACES)
OPTIONAL B1 BRACKET
(4 PLACES)
OPTIONAL P6 PLATE
TOP TERMINAL OPTION
0.75
5.65
1.36
4.65
5.65
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
POLARITY LABEL
5.657.00
3.15
0.25
4.655.65
-
5/23/2018 Toroidal Current Transformers
30/115
PAGE No 1-29
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10
-4
10
-3
10
-2
10
-1
10
0
10
1
EXCITING CURRENT (amp)
10-3
10-2
10-1
101
102
INDUCED
VOLTAGE
(volt)
100
TYPICAL EXCITATION CURVE for WICC MODEL MWX at 60HZ
*"xxx" describes termination: "T" FOR BRASS STUDS, "TT" FOR BRASS STUDS in topterminal configuration, and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length ininches. For example, "L24" represents 24 inch long lead wires.)
CURRENT TRANSFORMER
MODEL MWX3.50" I.D.
REV 15DEC00
40
0:5A
300:5A
750:5A
500:5A
100
0:5
1500
:5
2000
:5A
W.I.C.C. PARTNUMBER * RATIO
ANSI ACCURACY CLASS @ 60HZ NOMINAL WINDINGRESISTANCE (ohm)
MWX-100-00-xxxMWX-200-00-xxxMWX-300-00-xxxMWX-400-00-xxxMWX-500-00-xxx
MWX-600-00-xxxMWX-750-00-xxxMWX-1000-00-xxxMWX-1200-00-xxxMWX-1500-00-xxxMWX-2000-00-xxx
100:5A200:5A300:5A400:5A500:5A
600:5A750:5A1000:5A1200:5A1500:5A2000:5A
0.020.040.060.080.10
0.120.140.190.250.320.44
B0.1
4.81.20.60.60.3
0.30.30.30.30.30.3
B0.2
--
1.20.60.6
0.30.30.30.30.30.3
B0.5
---
1.21.2
0.60.60.30.30.30.3
B0.9
----
1.2
1.20.60.60.60.30.3
B1.8
-----
-1.20.60.60.60.3
RELAYCLASS
-----
--
C10C10C10C20
200:5A
100:5A
-
5/23/2018 Toroidal Current Transformers
31/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-3
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 3000:5A,1.15 @ 30C for ratios of 3000:5A and above
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional bracket is aluminum
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL N4.25" I.D
REV 15DEC00
4.25
0.75
5.75
7.00
UL 1015 #16 AWG LEAD WIRE,
STANDARD LENGTH IS 24"
SCREW CLAMPFOR SS BAND
OPTIONAL B1BRACKET
0.25 x 0.50 SLOT
(2 PLACES)
SS BAND SECURES BRACKET(view of screw clamp band omitted for clarity)
TERMINAL OPTION LEAD WIRE OPTION
NOTES1). ALL DIMENSIONS IN INCHES2). ALL DIMENSIONS REF ONLY
7.13
6.75
8-32 BRASS STUD (2 PLACES)
POLARITY LABEL (H1)
3.75
1.16
1.36
0.39(4 PLACES)
OPTIONAL P7MOUNTING
PLATE
5.44
6.75
5.44 6.75
-
5/23/2018 Toroidal Current Transformers
32/115
PAGE No 1-31
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL N at 60HZ
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT am
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
N-500-00-xxxN-750-00-xxx
N-1000-00-xxxN-1600-00-xxxN-2000-00-xxx
N-2500-00-xxxN-3000-00-xxx
500:5A750:5A1000:5A1600:5A2000:5A
2500:5A3000:5A
1.01.01.01.01.0
1.01.0
3.07.5152540
4050
0.140.210.280.410.52
0.811.0
CURRENT TRANSFORMER
MODEL N4.25" I.D.
REV 15DEC00
500:5A
750:5A
1000
:5A
1
600:5A
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
2000
:5A
2500
:5A
3000:
5A
-
5/23/2018 Toroidal Current Transformers
33/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-3
CURRENT TRANSFORMER
MODEL ND4.25" I.D
REV 15DEC00
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 4250:5A,1.15 @ 30C for ratios of 4250:5A and above
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Optional bracket is steel
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary current. Other non-standard ratings also available
1, 0.2, and 0.1 A output at F.S. primary current. Other non-standardratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires.Choice of stud location
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Available with B20 bracket kit. See Bracket Data Section fordimensions
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
UL 1015 #16 AWG LEAD WIRE,STANDARD LENGTH IS 24"
0.26 x 0.63 THROUGH SLOT (4 PLACES)
OPTIONAL B20 MOUNTING
BRACKET KIT
8-32 BRASS STUD (2 PLACES)
POLARITY LABEL (2 PLACES)
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
POLARITY LABEL
5.75
1.19 2.88
3.81
4.88
3.50
5.00
6.00
5.00 6.00
1.25 0.88
SIDE TERMINAL OPTION LEAD WIRE OPTION
4.25
TOP TERMINALOPTION
-
5/23/2018 Toroidal Current Transformers
34/115
PAGE No 1-33
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100 10
1
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL ND at 60HZ
*"xxx" describes termination: "T" FOR BRASS STUDS, "TT" FOR BRASS STUDS in top terminal configuration,and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inchlong lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
ND-300-00-xxxND-500-00-xxxND-600-00-xxxND-800-00-xxx
ND-1000-00-xxx
ND-1200-00-xxxND-1500-00-xxxND-1600-00-xxxND-2000-00-xxxND-2500-00-xxxND-3000-00-xxxND-4000-00-xxxND-5000-00-xxx
300:5A500:5A600:5A800:5A1000:5A
1200:5A1500:5A1600:5A2000:5A2500:5A3000:5A4000:5A5000:5A
1.51.01.01.01.0
1.01.01.01.01.01.01.01.0
2.02.54.08.515
2025302525202530
0.070.110.140.180.22
0.270.330.360.410.520.540.761.2
CURRENT TRANSFORMER
MODEL ND4.25" I.D.
REV 15DEC00
300:5A
500:5A
600:5A
15
00:5A
4000
:5A
5000
:5A
800:5
A
1000
:5A
1200
:52000
:5
3000
:5A
-
5/23/2018 Toroidal Current Transformers
35/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
CURRENT TRANSFORMER
MODEL NDX4.25" I.D
REV 15DEC00
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 4250:5A,1.15 @ 30C for ratios of 4250:5A and above
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Optional bracket is steel
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary current. Other non-standard ratings also available
1, 0.2, and 0.1 A output at F.S. primary current. Other non-standardratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires.Choice of stud location
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios
Available with B20 bracket kit. See Bracket Data Section fordimensions
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
UL 1015 #16 AWG LEAD WIRE,STANDARD LENGTH IS 24"
0.26 x 0.63 THROUGH SLOT (4 PLACES)
OPTIONAL B20 MOUNTING
BRACKET KIT
8-32 BRASS STUD (2 PLACES)
POLARITY LABEL (2 PLACES)
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
POLARITY LABEL
5.75
1.19 2.88
3.81
4.88
3.50
5.00
6.00
5.00 6.00
1.25 0.88
SIDE TERMINAL OPTION LEAD WIRE OPTION
4.25
TOP TERMINALOPTION
PAGE No 1-3
-
5/23/2018 Toroidal Current Transformers
36/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL NDX at 60HZ
10-4
10-3
10-1
100
101
EXCITING CURRENT (amp)
10-2
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
*"xxx" describes termination: "T" FOR BRASS STUDS, "TT" FOR BRASS STUDS in top terminal configuration,and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inchlong lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
NDX-300-00-xxxNDX-500-00-xxxNDX-600-00-xxxNDX-800-00-xxxNDX-1000-00-xxx
NDX-1200-00-xxxNDX-1500-00-xxxNDX-1600-00-xxxNDX-2000-00-xxxNDX-2500-00-xxxNDX-3000-00-xxxNDX-4000-00-xxx
300:5A500:5A600:5A800:5A1000:5A
1200:5A1500:5A1600:5A2000:5A2500:5A3000:5A4000:5A
1.01.01.01.01.0
1.01.01.01.01.01.01.0
6.020255075
1008080
100656575
0.050.080.120.160.22
0.310.330.360.440.480.530.76
CURRENT TRANSFORMER
MODEL NDX4.25" I.D.
REV 15DEC00
200:5A
250
:5A
300:5A
800:5A
40
0:5A
500:5A
600:5A
10
00:5A
1200
:5A
PAGE No 1-35
-
5/23/2018 Toroidal Current Transformers
37/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
CURRENT TRANSFORMER
MODEL NDX4.25" I.D
REV 15DEC00
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL NDX at 60HZ
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL NDX at 60HZ
2500
:5A
3000
:5A
4000
:5A
1500
:5A
2000
:5A
PAGE No 1-3
-
5/23/2018 Toroidal Current Transformers
38/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
BLANK PAGE
PAGE No 1-37
-
5/23/2018 Toroidal Current Transformers
39/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-3
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional plate is XX phenolic, optional bracket is steel
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1.0, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #16 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 5461.10" I.D
REV 15DEC00
TERMINAL OPTION LEAD WIRE OPTION
1.10 1.00
2.55
3.00
3.47
0.18 x 0.31 SLOT( 2 PLACES)
2.77
1.10
NOTE:1) ALL DIMENSIONS IN INCHES2) ALL DIMENSIONS REF ONLY
UL1015 #16 AWG LEAD WIRE,STANDARD LENGTH IS 24"
(4 PLACES)
2.56
2.06
2.50
0.22
OPTIONAL B546 MOUNTINGBRACKET
1
OPTIONAL 635MOUNTING PLATE
X
1
H1
H1
X1
X1
H1
8-32 BRASS STUD (2 PLACES)
-
5/23/2018 Toroidal Current Transformers
40/115
PAGE No 1-39
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL 546 at 60HZ
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
10-4
10-3
10-2
10-1
100
101
INDUCE
D
VOLTAGE
(volt)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
546-050-00-xxx546-060-00-xxx546-075-00-xxx546-100-00-xxx546-125-00-xxx
546-150-00-xxx546-200-00-xxx546-250-00-xxx546-300-00-xxx546-400-00-xxx
50:5A60:5A75:5A
100:5A125:5A
150:5A200:5A250:5A300:5A400:5A
3.02.02.01.01.0
1.01.01.01.01.0
2.02.02.02.02.5
4.05.07.51015
0.0070.0080.010.020.025
0.030.040.0520.0620.083
CURRENT TRANSFORMER
MODEL 5461.10" I.D.
REV 15DEC00
50:5A
* "xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
60
:5A
75:5A
100
:5A
125
:5A
150
:5A
250:5A
200:5A
30
0:5A
400
:5A
-
5/23/2018 Toroidal Current Transformers
41/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-4
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 2.00 @ 30C for ratios up to 800:5A,1.50 @ 30C for ratios of 800:5A and above
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, colblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (physical size increases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available.
Custom lead wire lengths and types.
Thermal ratings above 1.50 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 5912.25" I.D
REV 15DEC00
5.38
4.38
0.25(4 PLACES)
OPTIONAL P8 PLATE
4.38
OPTIONAL B1B BRACKET
2.25
UL 1015 #14 AWG LEAD WIRESTANDARD LENGTH IS 36"
5.61
7.00
5.25
2.00 2.25 2.44
2). ALL DIMENSIONS REF ONLY1). ALL DIMENSIONS IN INCHESNOTES
0.50 x 0.75
SLOT (2 PLACES)
5.56H1 H1
POLARITYLABEL (H1)
SCREW CLAMP
for SS BAND
SS BAND SECURES BRACKET
(view of screw clamp omitted for clarity)
-
5/23/2018 Toroidal Current Transformers
42/115
PAGE No 1-41
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL 591 at 60HZ
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
W.I.C.C. PARTNUMBER * RATIO
ANSI ACCURACY CLASS @ 60HZ NOMINAL WINDINGRESISTANCE (ohm)
591-050-00-Lyyy591-075-00-Lyyy591-100-00-Lyyy591-150-00-Lyyy591-200-00-Lyyy
591-300-00-Lyyy591-400-00-Lyyy591-500-00-Lyyy591-600-00-Lyyy591-800-00-Lyyy
591-1000-00-Lyyy
50:5A75:5A
100:5A150:5A200:5A
300:5A400:5A500:5A600:5A800:5A1000:5A
0.020.020.030.040.06
0.090.120.160.190.260.40
CURRENT TRANSFORMER
MODEL 5912.25" I.D.
REV 15DEC00
*"Lyyy" descibes length of LEAD WIRES (Where "yyy" is the lead length in inches. Forexample, "L24" represents 24 inch long lead wires.)
B0.1
2.41.20.60.60.3
0.30.30.30.30.30.3
B0.2
--
1.20.60.6
0.30.30.30.30.30.3
B0.5
---
1.20.6
0.60.30.30.30.30.3
B0.9
----
1.2
0.60.60.30.30.30.3
B1.8
-----
1.20.60.30.30.30.3
RELAYCLASS
---
C10C10
C20C20C50C50C50
C100
50:5A
75:5A
10
0:5A
15
0:5A
200:5A
300:5A
500:5A
600:5
A
400:5A
800:5A
1
000:5
-
5/23/2018 Toroidal Current Transformers
43/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-4
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 2.00 @ 30C for ratios up to 1000:5A, 1.50@ 30C for ratios above 1000:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, coblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (lead wires only, physical sizeincreases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Screw Terminals or #14 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 2.00 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 5942.75" I.D
REV 15DEC00
5.38
4.38
(4 PLACES)
OPTIONAL P8 PLATE
5.34.38
OPTIONAL B1B BRACKET
UL 1015 #14 AWG LEAD WIRESTANDARD LENGTH IS 36"
7.00
2.00
2). ALL DIMENSIONS REF ONLY1). ALL DIMENSIONS IN INCHESNOTES
0.50 x 0.75SLOT (2 PLACES)
H1 H12.75
SS BAND SECURES BRACKET(2 PLACES)
(view of screw clamp omitted for clarity)
SCREW CLAMP
FOR SS BAND
LEAD WIRE OPTION TERMINAL OPTION
8-32 BRASS SCREWTERMINALS(2 PLACES)
X10.25
5.63
5.63
5.94
3.19 3.38
-
5/23/2018 Toroidal Current Transformers
44/115
PAGE No 1-43
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL 594 at 60HZ
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
CURRENT TRANSFORMER
MODEL 5942.75" I.D.
REV 15DEC00
W.I.C.C. PARTNUMBER * RATIO
ANSI ACCURACY CLASS @ 60HZ NOMINAL WINDINGRESISTANCE (ohm)
594-050-00-xxx594-075-00-xxx594-100-00-xxx594-150-00-xxx594-200-00-xxx
594-300-00-xxx594-400-00-xxx594-500-00-xxx594-600-00-xxx594-800-00-xxx594-1000-00-xxx
50:5A75:5A
100:5A150:5A200:5A
300:5A400:5A500:5A600:5A800:5A1000:5A
0.020.030.040.050.07
0.100.140.210.250.330.52
B0.1
2.41.20.60.30.3
0.30.30.30.30.30.3
B0.2
-2.41.20.60.3
0.30.30.30.30.30.3
B0.5
---
1.20.6
0.30.30.30.30.30.3
B0.9
----
1.2
0.60.30.30.30.30.3
B1.8
-----
1.20.60.30.30.30.3
RELAYCLASS
-C10C10C20C20
C20C50C50C50
C100C100
*"xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES(Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
50:5A
75:5A
100:5A
150:5A
200:5A
300:5A
500:5A
600:5
A
400:5A
800:5A
1
000:5A
-
5/23/2018 Toroidal Current Transformers
45/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-4
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 2.00 @ 30C for ratios up to 1500:5A, 1.50@ 30C for ratios above 1500:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, colblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (lead wires only, physical sizeincreases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Screw Terminals or #14 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 2.00 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 5992.60" I.D
REV 15DEC00
X1
H1
TERMINAL OPTION LEAD WIRE OPTION
5.63
3.88 2.00
5.63
7.00
SS BAND SECURES BRACKET(2 PLACES)(view of screw clamp omitted for clarity)
0.50 x 0.75 SLOT (2 PLACES)
2.60
OPTIONAL B1B BRACKET
3.13
6.33
SCREW CLAMP FOR SS BAND(2 PLACES)
UL 1015 #14 LEAD WIRE,STANDARD LENGTH IS 24"
4.06
(4 PLACES)
0.25
OPTIONAL P8MOUNTING
PLATE
4.38
5.38
4.38 5.38
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
H1
-
5/23/2018 Toroidal Current Transformers
46/115
PAGE No 1-45
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
TYPICAL EXCITATION CURVE for WICC MODEL 599 at 60HZ
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
CURRENT TRANSFORMER
MODEL 5992.60" I.D.
REV 15DEC00
W.I.C.C. PARTNUMBER * RATIO
ANSI ACCURACY CLASS @ 60HZ NOMINAL WINDINGRESISTANCE (ohm)
599-050-00-xxx599-100-00-xxx599-150-00-xxx599-200-00-xxx599-250-00-xxx
599-300-00-xxx599-400-00-xxx599-500-00-xxx599-600-00-xxx599-1000-00-xxx599-1200-00-xxx599-2000-00-xxx
50:5A100:5A150:5A200:5A250:5A
300:5A400:5A500:5A600:5A1000:5A1200:5A2000:5A
0.020.040.060.080.13
0.150.210.260.310.520.621.15
B0.1
2.40.60.30.30.3
0.30.30.30.30.30.30.3
B0.2
-1.20.60.30.3
0.30.30.30.30.30.30.3
B0.5
--
1.20.60.6
0.30.30.30.30.30.30.3
B0.9
---
0.60.6
0.60.30.30.30.30.30.3
B1.8
---
1.21.2
0.60.60.30.30.30.30.3
RELAYCLASS
-C10C20C20C20
C50C50C50
C100C100C200C200
*"xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES(Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
50:5A
10
0:5A
600:5
A
1000
:5A
500:5A
1200
:5
2000
:5A
400:5A
300
:5A
250:5A
20
0:5A
150:5A
-
5/23/2018 Toroidal Current Transformers
47/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-4
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 2.00 @ 30C for ratios up to 1500:5A, 1.50@ 30C for ratios of 1500:5A up to 2000:5A, and 1.33 @ 30C for ratiosabove 2000:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13and IEC 44-1
Enclosure is multi-layer tape buildup with heavy vinyl finish, colblack
Optional bracket is aluminum, optional plate is XX phenolic
Specifications
Medium voltage insulation classes (lead wires only, physical sizeincreases)
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Screw Terminals or #14 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 2.00 for selected ratios
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 6176.50" I.D
REV 18DEC00
H1
X1
H1
TERMINAL OPTION LEAD WIRE OPTION
9.88
3.00
5.63
2.00
SS BAND SECURES BRACKET(2 PLACES)(view of screw clamp omitted for clarity)
0.50 x 0.75 SLOT (2 PLACES)8-32 BRASS SCREW
TERMINAL (2 PLACES)
POLARITY LABEL
6.50
5.33
10.64
SCREW CLAMP
FOR SS BANDOPTIONAL B1BRACKET
OPTIONAL 617MOUNTING
PLATE
0.65(4 PLACES)
8.38
9.88
8.38 9.88
3.38
UL 1015 #14 AWG LEAD WIRE,STANDARD LENGTH IS 24"
NOTES1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
POLARITY LABEL
7.00
-
5/23/2018 Toroidal Current Transformers
48/115
PAGE No 1-47
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL 617 at 60HZ
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
W.I.C.C. PARTNUMBER * RATIO
ANSI ACCURACY CLASS @ 60HZ NOMINAL WINDINGRESISTANCE (ohm)
617-100-00-xxx617-150-00-xxx617-200-00-xxx617-300-00-xxx617-400-00-xxx
617-600-00-xxx617-800-00-xxx617-1000-00-xxx617-1200-00-xxx617-1600-00-xxx617-2000-00-xxx617-3000-00-xxx617-4000-00-xxx
100:5A150:5A200:5A300:5A400:5A
600:5A800:5A1000:5A1200:5A1600:5A2000:5A3000:5A4000:5A
0.030.050.070.100.13
0.200.270.330.390.651.32.02.6
B0.1
1.21.20.60.30.3
0.30.30.30.30.30.30.30.3
B0.2
-1.20.60.30.3
0.30.30.30.30.30.30.30.3
B0.5
--
1.20.60.6
0.30.30.30.30.30.30.30.3
B0.9
---
1.20.6
0.30.30.30.30.30.30.30.3
B1.8
----
1.2
0.60.30.30.30.30.30.30.3
RELAYCLASS
C10C10C20C20C50
C50C100C100C100C200C200C200C400
*"xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEADWIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch longlead wires.)
CURRENT TRANSFORMER
MODEL 6176.50" I.D.
REV 18DEC00
100:5A
150:5A
200:5A
300:5A
400:5A
600:5A
10
00:5A
1
200:5A
800:5A
1600
:5
2000
:5A
3000
:5
4000
:5A
-
5/23/2018 Toroidal Current Transformers
49/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-4
Secondary sources 1 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional plate is XX phenolic, optional bracket is steel
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
5, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #18 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 6351.10" I.D
REV 18DEC00
TERMINAL OPTION LEAD WIRE OPTION
1.10 1.00
2.55
3.00
3.47
0.18 x 0.31 SLOT( 2 PLACES)
2.77
1.10
NOTE:1) ALL DIMENSIONS IN INCHES2) ALL DIMENSIONS REF ONLY
UL1015 #18 AWG LEAD WIRE,STANDARD LENGTH IS 24"
(4 PLACES)
2.56
2.06
2.50
0.22
OPTIONAL B546 MOUNTINGBRACKET
1
OPTIONAL 635MOUNTING PLATE
X
1
H1
H1
X1
X1
H1
8-32 BRASS STUD (2 PLACES)
-
5/23/2018 Toroidal Current Transformers
50/115
PAGE No 1-49
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-3
10-2
10-1
100
101
102
INDUCED
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL 635 at 60HZ
10-5
10-4
10-3
10-2
10-1
100
EXCITING CURRENT (amp)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
635-050-01-xxx635-060-01-xxx635-075-01-xxx635-100-01-xxx635-125-01-xxx
635-150-01-xxx635-200-01-xxx635-250-01-xxx635-300-01-xxx635-400-01-xxx
50:1A60:1A75:1A
100:1A125:1A
150:1A200:1A250:1A300:1A400:1A
3.02.01.51.01.0
1.01.01.01.01.0
1.01.01.01.02.0
3.05.07.51015
0.050.060.150.310.38
0.570.951.201.452.00
CURRENT TRANSFORMER
MODEL 6351.10" I.D.
REV 18DEC00
50:1A
* "xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
60:1A
75:1A
150
:1A
100:
1A
125:1
A2
50:1A
200:1A
300:
1A
400:
1A
-
5/23/2018 Toroidal Current Transformers
51/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
PAGE No 1-5
Secondary sources 0.1 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13and IEC 44-1
Enclosure is glass-filled nylon, color is black
Optional plate is XX phenolic, optional bracket is steel
Specifications
UL and Canadian UL Recognized Component. File E100575
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
5, 1, and 0.2 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Stud Terminals or #20 AWG UL 1015 Lead Wires
Custom lead wire lengths and types
Thermal ratings above 1.33 for selected ratios.
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 6361.10" I.D
REV 18DEC00
TERMINAL OPTION LEAD WIRE OPTION
1.10 1.00
2.55
3.00
3.47
0.18 x 0.31 SLOT( 2 PLACES)
2.77
1.10
NOTE:1) ALL DIMENSIONS IN INCHES2) ALL DIMENSIONS REF ONLY
UL1015 #20 AWG LEAD WIRE,STANDARD LENGTH IS 24"
(4 PLACES)
2.56
2.06
2.50
0.22
OPTIONAL B546 MOUNTINGBRACKET
1
OPTIONAL 635MOUNTING PLATE
X
1
H1
H1
X1 X1
H1
8-32 BRASS STUD (2 PLACES)
-
5/23/2018 Toroidal Current Transformers
52/115
PAGE No 1-51
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-5
10-4
10-3
10-2
10-1
100
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL 636 at 60HZ
10-2
10-1
100
101
102
103
INDUCE
D
VOLTAGE
(volt)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ, pf = 0.95
% BURDEN (ohm)
NOMINAL WINDINGRESISTANCE (ohm)
636-050-02-xxx636-060-02-xxx636-075-02-xxx636-100-02-xxx636-125-02-xxx
636-150-02-xxx636-200-02-xxx636-250-02-xxx636-300-02-xxx636-400-02-xxx
50:0.1A60:0.1A75:0.1A100:0.1A125:0.1A
150:0.1A200:0.1A250:0.1A300:0.1A400:0.1A
1.01.01.01.01.0
1.01.01.01.01.0
203050
100175
27550075011501600
5.97.19.12025
30406580160
CURRENT TRANSFORMER
MODEL 6361.10" I.D.
REV 18DEC00
50:0
.1A
* "xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
60:0
.1A
75:0
.1A
150:0.
1A
100:0.
1A
125:0.1
A25
0:0.
1A
200:0
.1A
300:0.
1A
400:0.
1A
-
5/23/2018 Toroidal Current Transformers
53/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
Secondary sources 1 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13-and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Specifications
UL and Canadian UL Recognized Component. File E100575.
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
5, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available.
8-32 Brass Studs or #18 AWG UL 1015 Lead Wires.
Custom lead wire lengths and types.
Thermal ratings above 1.33 for selected ratios
Housing with or without mounting flange (See Model 652F forflange design).
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 6522.50" I.D
REV 18DEC00
OTHER LENGTHS AVAILABLE
TERMINAL OPTION LEAD WIRE OPTION
STANDARD LENGTH IS 24",
3.25
4.56
1.08
2.35
4.692.50
8-32 BRASS STUDS (2 PLACES)
UL 1015, #18 AWG LEAD WIRE
NOTES
1). ALL DIMENSIONS IN INCHES2). ALL DIMENSIONS REF ONLY
(2 PLACES)
OPTIONAL B653 STEEL
BRACKET
0.28x0.50 SLOT (2 PLACES)
3.71
0.44
0.28
0.41
3.50
PAGE No 1-5
-
5/23/2018 Toroidal Current Transformers
54/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL 652 at 60HZ
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
652-500-01-xxx652-750-01-xxx652-1000-01-xxx652-1200-01-xxx652-1500-01-xxx
652-2000-01-xxx
500:1A750:1A1000:1A1200:1A1500:1A
2000:1A
1.01.01.01.01.0
1.0
7.515152025
30
2.43.65.46.68.4
12
CURRENT TRANSFORMER
MODEL 6522.50" I.D.
REV 18DEC00
500:1A
750
:1A
1000
:1A
1500
:1A
200
0:1A
1200
:1A
PAGE No 1-53
-
5/23/2018 Toroidal Current Transformers
55/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
Secondary sources 1 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for all ratios
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Specifications
CURRENT TRANSFORMER
MODEL 652F2.50" I.D
REV 18DEC00
UL and Canadian UL Recognized Component. File E100575.
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
5, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Studs or #18 AWG UL 1015 Lead Wires.
Custom lead wire lengths and types.
Thermal ratings above 1.33 for selected ratios.
Housing with or without mounting flange (See Model 652 for nflange design).
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
OTHER LENGTHS AVAILABLE
TERMINAL OPTION LEAD WIRE OPTION
STANDARD LENGTH IS 24",
3.25
3.71
4.56
1.08 2.08
0.13
2.35
4.692.50
0.25 X 0.31 SLOTS (4 PLACES)
8-32 BRASS STUDS (2 PLACES)
UL 1015, #18 AWG LEAD WIRE
NOTES
1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
PAGE No 1-5
-
5/23/2018 Toroidal Current Transformers
56/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
10-2
10-1
100
101
102
103
INDUCED
VOLTAGE
(volt)
TYPICAL EXCITATION CURVE for WICC MODEL 652F at 60HZ
CURRENT TRANSFORMER
MODEL 652F2.50" I.D.
REV 18DEC00
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
652F-500-01-xxx652F-750-01-xxx
652F-1000-01-xxx652F-1200-01-xxx652F-1500-01-xxx
652F-2000-01-xxx
500:1A750:1A1000:1A1200:1A1500:1A
2000:1A
1.01.01.01.01.0
1.0
7.515152025
30
2.43.65.46.68.4
12
500:1A
7
50:1A
1000
:1A
1500
:1A
2
000:1A
1200
:1A
PAGE No 1-55
-
5/23/2018 Toroidal Current Transformers
57/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 1250:5A, 1.15@ 30C for ratios above 1250:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Specifications
UL and Canadian UL Recognized Component. File E100575.
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available.
8-32 Brass Studs or #16 AWG UL 1015 Lead Wires.
Custom lead wire lengths and types.
Thermal ratings above 1.33 for selected ratios
Housing with or without mounting flange (See Model 653F forflange design).
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
CURRENT TRANSFORMER
MODEL 6532.50" I.D
REV 18DEC00
OTHER LENGTHS AVAILABLE
TERMINAL OPTION LEAD WIRE OPTION
STANDARD LENGTH IS 24",
3.25
4.56
1.08
2.35
4.692.50
8-32 BRASS STUDS (2 PLACES)
UL 1015, #16 AWG LEAD WIRE
NOTES
1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
(2 PLACES)
OPTIONAL B653 STEELBRACKET
0.28x0.50 SLOT (2 PLACES)
3.71
0.44
0.28
0.41
3.50
PAGE No 1-5
-
5/23/2018 Toroidal Current Transformers
58/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
10-4
10-3
10-2
10-1
100
101
EXCITING CURRENT (amp)
TYPICAL EXCITATION CURVE for WICC MODEL 653 and 653F at 60HZ
10-3
10-2
10-1
100
101
INDUCED
VOLTAGE
(volt)
102
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
653-100-00-xxx653-150-00-xxx653-200-00-xxx653-250-00-xxx653-300-00-xxx
653-400-00-xxx653-500-00-xxx653-600-00-xxx653-800-00-xxx653-1000-00-xxx653-1200-00-xxx653-1500-00-xxx653-1600-00-xxx
100:5A150:5A200:5A250:5A300:5A
400:5A500:5A600:5A800:5A1000:5A1200:5A1500:5A1600:5A
3.01.51.01.01.0
1.01.01.01.01.01.01.01.0
2.02.02.02.02.0
4.06.5101515202025
0.020.030.040.040.05
0.100.120.140.190.220.270.420.45
CURRENT TRANSFORMER
MODEL 6532.50" I.D.
REV 18DEC00
100:5A
150:5A
200:5A
300:5A
400:5A
500:5A
800
:5A
1000
:5A
1200
:5A
1500
:5A
PAGE No 1-57
-
5/23/2018 Toroidal Current Transformers
59/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
Secondary sources 5 amps AC at rated F.S. primary current
Nominal operating frequency range is 50-400HZ
Thermal rating factor is 1.33 @ 30C for ratios up to 1250:5A, 1.15@ 30C for ratios above 1250:5A
Insulation voltage class is 0.6KV BIL 10KV
For indoor applications only
Reference documents IEEE C57.13, UL1244, CSA CAN3-C13-and IEC 44-1
Enclosure is made of glass-filled Nylon, color is black
Specifications
CURRENT TRANSFORMER
MODEL 653F2.50" I.D
REV 18DEC00
UL and Canadian UL Recognized Component. File E100575.
2.0, 5.0, and 10 VAC output at F.S. primary amperage. Other non-standard ratings also available.
1, 0.2, and 0.1 A output at F.S. primary amperage. Other non-standard ratings also available
8-32 Brass Studs or #16 AWG UL 1015 Lead Wires.
Custom lead wire lengths and types.
Thermal ratings above 1.33 for selected ratios.
Housing with or without mounting flange (See Model 653 for nflange design).
Center tap and custom multi tap winding arrangements
Options, contact Factory for information
OTHER LENGTHS AVAILABLE
TERMINAL OPTION LEAD WIRE OPTION
STANDARD LENGTH IS 24",
3.25
3.71
4.56
1.08 2.08
0.13
2.35
4.692.50
0.25 X 0.31 SLOTS (4 PLACES)
8-32 BRASS STUDS (2 PLACES)
UL 1015, #16 AWG LEAD WIRE
NOTES
1). ALL DIMENSIONS IN INCHES
2). ALL DIMENSIONS REF ONLY
PAGE No 1-5
-
5/23/2018 Toroidal Current Transformers
60/115
W.I.C.C. Ltd119 MULLER RDPO Box 252WASHINGTON IL 61571(309)-444-4125FAX (309)-444-3313
CURRENT TRANSFORMER
MODEL 653F2.50" I.D.
REV 18DEC00
*"xxx" describes termination: "T" FOR BRASS STUDS, "Lyyy" FOR LEAD WIRES (Where"yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)
W.I.C.C. PARTNUMBER * RATIO
ACCURACY @ 60HZ
% BURDEN (VA)
NOMINAL WINDINGRESISTANCE (ohm)
653F-100-00-xxx653F-150-00-xxx653F-200-00-xxx653F-250-00-xxx653F-300-00-xxx
653F-400-00-xxx653F-500-00-xxx653F-600-00-xxx653F-750-00-xxx
653F-1000-00-xxx653F-1200-00-xxx653F-1500-00-xxx653F-1600-00-xxx
100:5A150:5A200:5A250:5A300:5A
400:5A500:5A600:5A750:5A1000:5
