Topic 1 – Physics and physical measurement
-
Upload
alexis-frye -
Category
Documents
-
view
27 -
download
3
description
Transcript of Topic 1 – Physics and physical measurement
![Page 1: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/1.jpg)
Topic 1 – Physics and physical measurement
Use the syllabus and this REVISION POWERPOINT
when studying for examinations
![Page 2: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/2.jpg)
Order of magnitude
The number of atoms in 12g of carbon is approximately 600000000000000000000000
We can say to the nearest order of magnitude that the number of atoms in 12g of carbon is 1024
(6 x 1023 is 1 x 1024 to one significant figure)
This can be written as 6 x 1023
![Page 3: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/3.jpg)
Small numbers
Similarly the length of a virus is 2.3 x 10-8 m. We can say to the nearest order of magnitude the length of a virus is 10-8 m.
![Page 4: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/4.jpg)
Ranges of sizes, masses and times
You need to have an idea of the ranges of sizes, masses and times that occur in the universe.
![Page 5: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/5.jpg)
You have to LEARN these!
Size10-15 m to 1025 m (subatomic particles to the
extent of the visible universe)Mass
10-30 kg to 1050 kg (electron to the mass of the Universe)
Time10-23 s to 1018 s (time for light to cross a
nucleus to the age of the Universe)
![Page 6: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/6.jpg)
A common ratio – Learn this!Q3. Determine the ratio of the diameter of a
hydrogen atom to the diameter of a hydrogen nucleus to the nearest order of magnitude.
Hydrogen atom ≈ 10-10 m
Proton ≈ 10-15 mRatio of diameter of a hydrogen atom
to its nucleus
= 10-10/10-15 = 105
![Page 7: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/7.jpg)
Estimation
For IB you have to be able to make order of magnitude estimates.
![Page 8: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/8.jpg)
The SI system of units
There are seven fundamental base units which are clearly defined and on which all other derived units are based:
You need to know these
![Page 9: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/9.jpg)
SI Base Units
Quantity Unit
distance metre
time second
current ampere
temperature kelvin
quantity of substance mole
luminous intensity candela
mass kilogram
Can you copy this please?
Note: No Newton or Coulomb
![Page 10: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/10.jpg)
Derived units
Other physical quantities have units that are combinations of the fundamental units.
Speed = distance/time = m.s-1
Acceleration = m.s-2
Force = mass x acceleration = kg.m.s-2 (called a Newton)
(note in IB we write m.s-1 rather than m/s)
![Page 11: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/11.jpg)
Some important derived units (learn these!)
1 N = kg.m.s-2 (F = ma)
1 J = kg.m2.s-2 (W = Force x distance)
1 W = kg.m2.s-3 (Power = energy/time)
Guess what
![Page 12: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/12.jpg)
Prefixes
Power Prefix Symbol Power Prefix Symbol
10-18 atto a 101 deka da
10-15 femto f 102 hecto h
10-12 pico p 103 kilo k
10-9 nano n 106 mega M
10-6 micro μ 109 giga G
10-3 milli m 1012 tera T
10-2 centi c 1015 peta P
10-1 deci d 1018 exa E
Don’t worry! These will all
be in the formula book you have for the exam.
![Page 13: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/13.jpg)
Examples
3.3 mA = 3.3 x 10-3 A
545 nm = 545 x 10-9 m = 5.45 x 10-7 m
2.34 MW = 2.34 x 106 W
![Page 14: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/14.jpg)
Errors/Uncertainties
In EVERY measurement (as opposed to simply counting) there is an uncertainty in the measurement.
This is sometimes determined by the apparatus you're using, sometimes by the nature of the measurement itself.
![Page 15: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/15.jpg)
Individual measurements
When using an analogue scale, the uncertainty is plus or minus half the smallest scale division. (in a best case scenario!) 22.0 ± 0.5 V
![Page 16: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/16.jpg)
Individual measurements
When using a digital scale, the uncertainty is plus or minus the smallest unit shown.
19.16 ± 0.01 V
![Page 17: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/17.jpg)
Repeated measurements
When we take repeated measurements and find an average, we can find the uncertainty by finding the difference between the average and the measurement that is furthest from the average.
![Page 18: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/18.jpg)
Precision
A man’s height was measured several times using a laser device. All the measurements were very similar and the height was found to be
184.34 ± 0.01 cm
This is a precise result (high number of significant figures, small range of measurements)
![Page 19: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/19.jpg)
AccuracyHeight of man = 184.34 ± 0.01cm
This is a precise result, but not accurate (near the “real value”) because the man still had his shoes on.
![Page 20: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/20.jpg)
Random errors/uncertainties
Some measurements do vary randomly. Some are bigger than the actual/real value, some are smaller. This is called a random uncertainty. Finding an average can produce a more reliable result in this case.
![Page 21: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/21.jpg)
Systematic/zero errors
Sometimes all measurements are bigger or smaller than they should be. This is called a systematic or “zero” error/uncertainty.
![Page 22: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/22.jpg)
Systematic/zero errors
This is normally caused by not measuring from zero. For example when you all measured Mr Porter’s height without taking his shoes off!
For this reason they are also known as zero errors/uncertainties. Finding an average doesn’t help.
![Page 23: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/23.jpg)
Uncertainties
If the average height of students at BSH is 1.23 ± 0.01 m
We say the absolute uncertainty is 0.01 m
The fractional uncertainty is 0.01/1.23 = 0.008
The percentage uncertainty is 0.01/1.23 x 100 = 0.8%
![Page 24: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/24.jpg)
Combining uncertainties
When we find the volume of a block, we have to multiply the length by the width by the height.
Because each measurement has an uncertainty, the uncertainty increases when we multiply the measurements together.
![Page 25: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/25.jpg)
Combining uncertainties
When multiplying (or dividing) quantities, to find the resultant uncertainty we have to add the percentage (or fractibnal) uncertainties of the quantities we are multiplying.
![Page 26: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/26.jpg)
Combining uncertaintiesExample: A block has a length of 10.0 ± 0.1 cm, width 5.0 ± 0.1 cm and height 6.0 ± 0.1 cm.
Volume = 10.0 x 5.0 x 6.0 = 300 cm3
% uncertainty in length = 0.1/10 x 100 = 1%% uncertainty in width = 0.1/5 x 100 = 2 %% uncertainty in height = 0.1/6 x 100 = 1.7 %
Uncertainty in volume = 1% + 2% + 1.7% = 4.7%
(4.7% of 300 = 14)
Volume = 300 ± 14 cm3
This means the actual volume could be anywhere between 286 and 314 cm3
![Page 27: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/27.jpg)
Combining uncertainties
When adding (or subtracting) quantities, to find the resultant uncertainty we have to add the absolute uncertainties of the quantities we are multiplying.
![Page 28: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/28.jpg)
Combining uncertainties
One basketball player has a height of 196 ± 1 cm and the other has a height of 152 ± 1 cm. What is the difference in their heights?
Difference = 44 ± 2 cm
![Page 29: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/29.jpg)
Who’s going to win
Bush = 48 ± 5 % = between 43 and 53 %
Gore = 52 ± 5 % = between 47 and 57 %
We can’t say!
(If the uncertainty is greater than the difference)
![Page 30: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/30.jpg)
Error bars
• X = 0.6 ± 0.1
• Y = 0.5 ± 0.1
![Page 31: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/31.jpg)
Gradients
![Page 32: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/32.jpg)
Minimum gradient
![Page 33: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/33.jpg)
Maximum gradient
![Page 34: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/34.jpg)
y = mx + c
![Page 35: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/35.jpg)
y = mx + c
• Ek = ½mv2
![Page 36: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/36.jpg)
y = mx + c
• Ek = ½mv2
Ek (J)
V2 (m2.s-2)
![Page 37: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/37.jpg)
Period of a pendulum
T = 2π l g
![Page 38: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/38.jpg)
Period of a pendulum
T = 2π l g
T (s)
l½ (m½)
![Page 39: Topic 1 – Physics and physical measurement](https://reader033.fdocuments.in/reader033/viewer/2022052510/568134c0550346895d9be3fb/html5/thumbnails/39.jpg)
Period of a pendulum
T = 2π l g
T2 (s)
l (m)