Topic 1 M E Introduction
-
Upload
sethra-sen -
Category
Documents
-
view
219 -
download
0
Transcript of Topic 1 M E Introduction
-
8/11/2019 Topic 1 M E Introduction
1/18
Construction Measurement III/ SBQ3314
Introduction To Electrical &
Mechanical Works
Dr. Sarajul Fikri Mohamed
-
8/11/2019 Topic 1 M E Introduction
2/18
Traditional Building
-
8/11/2019 Topic 1 M E Introduction
3/18
Purpose of M&E Measurement
1. To determine element and components that involved to the
M & E works.
2. To measure according to the latest standard method of
measurement SMM2.
3. To protect the interest of the client and the contractor.
4. The information derived from a priced BQ to aid the
construction planning networks.
5. A tool for cost control in mechanical and electrical services.6. To minimize future disagreement.
3
-
8/11/2019 Topic 1 M E Introduction
4/18
-
8/11/2019 Topic 1 M E Introduction
5/18
Smart Building
-
8/11/2019 Topic 1 M E Introduction
6/18
ELEMENTAL ANALYSIS
Substructure
Superstructure
Internal Finishing
Fitting and Furnishing
Services
External Works
Preliminaries
Building Elements
-
8/11/2019 Topic 1 M E Introduction
7/18
Electrical Installations
-
8/11/2019 Topic 1 M E Introduction
8/18
-
8/11/2019 Topic 1 M E Introduction
9/18
Fire Fighting Installations
9
-
8/11/2019 Topic 1 M E Introduction
10/18
MECHANICAL &
ELECTRICAL WORKS
MEASUREMENT RULES
Standard Method of
Measurement of Building Works
SECOND EDITION
-
8/11/2019 Topic 1 M E Introduction
11/18
Submission to Course Tutor
Read and check drawing
Drawing numbering and scale used.
Taking off list
Heading and Description
Take off
Annotation
Query list
Final checking
PROJECT DRAWINGS
Studio Works
http://localhost/var/www/apps/conversion/tmp/scratch_9/Paper%20Ref%20No.%20368.dochttp://localhost/var/www/apps/conversion/tmp/scratch_9/Paper%20Ref%20No.%20368.doc -
8/11/2019 Topic 1 M E Introduction
12/18
-
8/11/2019 Topic 1 M E Introduction
13/18
M&E Works and Bill of Quantities
Clients realised that this approach was not very satisfactory in
determining where the actual costs for this work are being
expended
It was largely presented in this way for three main reasons
M&E Engineers often failed to provide the appropriate
details in time for quantification purposes.
It was not the custom to measure M&E works.
Contractors often preferred to offer lump sum quotations on
the basis of drawing and specification only.
Traditionally, much of M&E Works was included in BQs as primecost sums.
-
8/11/2019 Topic 1 M E Introduction
14/18
-
8/11/2019 Topic 1 M E Introduction
15/18
Management
Documentation
Analysis
Appraisal Quantification
BILL OF QUANTITIES
SKILLS
Output
Construction technology
Measurement rules
Construction economics
Financial management Business administration
Construction law
KNOWLEDGE
Skills and Knowledge For QS
-
8/11/2019 Topic 1 M E Introduction
16/18
Summary
[ Lord Esher, 1971]
On average the mechanical services account
for close on a third of the cost of modern
building
-
8/11/2019 Topic 1 M E Introduction
17/18
-
8/11/2019 Topic 1 M E Introduction
18/18
THANK YOU