Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate...
-
Upload
davion-pinnell -
Category
Documents
-
view
214 -
download
1
Transcript of Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate...
![Page 1: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/1.jpg)
Tooth Guard for the Laryngoscope
University of PittsburghSenior Design – BioE 1160/1161
Nate AngeloffMike Matthews
Virginia Penascino Sean Ritchie
April 18, 2006
Mentors: Jim Menegazzi, PhD
Manuel Vallejo, DMD, MD
![Page 2: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/2.jpg)
Overview
• A Laryngoscope is an instrument used to examine the interior of the larynx during intubation. The traditional laryngoscope can be difficult to use. It can cause oral cavity and soft tissue damage
• Oral cavity damage can include tooth fracturing
• We designed a tooth guard that would slide over the Miller blade to provide a cushion against the forces applied to the upper and lower teeth
• This product is used in pre-hospital emergency care and in the hospital setting
![Page 3: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/3.jpg)
Background
• Dental injury is the most common medical legal complaint against anesthesia providers (33%-38%)
• Average cost = $1,672 ± $2,378 (0 – $8,038)• 62% of teeth damaged by the laryngoscope have
been previously restored or are associated with periodontal disease
• Incidence of dental injury• 0.02% - 0.7% (retrospective) • 12.1% (prospective)
• UPMC paid for $25,000 worth of dental repair from October to June 2000
![Page 4: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/4.jpg)
Teeth Most at Risk
• Upper maxillary central incisors are most at risk
• Single tooth usually involved - only 13% > 1 tooth
• Upper left maxillary central incisor is most at risk (51%*)
5% 8% 16% 51% 19% 0%5% 8% 16% 51% 19% 0%
*
![Page 5: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/5.jpg)
Facts
• Damage is 5x more likely with a pre-existing dental condition
• Most injuries crown fractures + partial dislocations• Non restored teeth incisal chipping• Isolated teeth dislodgement• Orthodontic treatment tooth mobility and root
resorption
![Page 6: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/6.jpg)
Problem Statement
• Current Solutions• Gauze roll
• Oropharyngeal Airway
• Bite Block• Bitegard• Endoscopic
• Not for emergency situations
• Won’t work during a difficult intubation
![Page 7: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/7.jpg)
Features & Benefits
• The laryngoscope is not being redesigned. Instead we are manufacturing a sheath to cover the points on the blade that apply pressure to the teeth
• The sheath will be made out of a soft, elastic material to provide ample cushioning for the patient’s teeth
• The guard was manufactured and fitted to the blade so that visibility and lighting are minimally affected
![Page 8: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/8.jpg)
Design Requirements
• The guard must fit in the oral cavity• It needs to cover the area of the blade that
contacts the upper maxillary incisors• The width of the guard must be larger than
the blade so that it contacts more teeth• Using a soft material will cut down on
incidental impact damages• The least amount of material should be used
to ensure greatest amount of visibility. This also minimizes cost
![Page 9: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/9.jpg)
Proposed Solution
• The insertion site is machined to the exact specification of the Miller blade• This could easily be made universal for other sizes and
different manufactured blades
• The increased width and flattened sides of the guard helps distribute the force over more than one tooth
![Page 10: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/10.jpg)
Prototype Fabrication
• SolidWorks model was sent to quickparts.com
• The prototype was fabricated using PolyJet Tango Elastomer in stereolithography
![Page 11: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/11.jpg)
Materials
• New PolyJet Tango material that simulates the feel of flexible materials such as rubber or silicone
• Tango Black is the softest material they provide with a SHORE A hardness of 61 durometers
• Shore (Durometer) test measures the resistance of plastics toward indentation and provides an empirical hardness value • Silicone rubber tubing
ranges from 40 to more than 65
![Page 12: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/12.jpg)
Set Up
• Two models of the upper jaw were obtained from the Wiser center
• The teeth in the model were all joined
• The sides of the upper maxillary incisors were shaved down using a razor blade
• Each jaw model was super glued and screwed to a piece of wood
• The wood was on a hinge which allowed the model jaw to pivot while the force transducer was placed directly underneath
• Using a prying motion with the laryngoscope, the teeth were broken
![Page 13: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/13.jpg)
Testing
• First we broke model teeth with the guard and without the guard
• After the model teeth were broken, we inserted human teeth into the jaw mold• The teeth were supplied by Dr. Vallejo and
drilled at the dental school• We were hoping for a larger force on the jaw
when the guard was used• Indicating the force was being dispersed over
more teeth, preventing any of them from breaking
![Page 14: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/14.jpg)
Results
• First the teeth were broken without the guard, the average force required for fracture was 203.6 N
• These forces are for the model teeth, not real human teeth
![Page 15: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/15.jpg)
Results (con’t)
• This is us breaking a tooth without the guard on the laryngoscope
![Page 16: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/16.jpg)
Results (con’t)
• Next we attempted to break the teeth with the guard but were unsuccessful
• The guard spread the force out so much that none of the teeth broke, even when using as much force as possible
![Page 17: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/17.jpg)
Results (con’t)
• This is us attempting to break a tooth with the guard on the laryngoscope
![Page 18: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/18.jpg)
Results (con’t)
Force Required to Fracture Without Guard
1
2
3
4
Avg
170
180
190
200
210
220
230
Run
Fo
rce
(N)
Force Required to Fracture WithoutGuard
Force Required to Fracture Without Guard
170
180
190
200
210
220
230
Trial 1 Trial 2 Trial 3 Trial 4 Average
Fo
rce
(N)
Force Required to Fracture WithoutGuard
Force Required to Fracture
Without Guard (N)Force Required to Fracture With Guard
(N)
Trial 1 221 No Fracture
Trial 2 211.5 No Fracture
Trial 3 188.2 No Fracture
Trial 4 193.8 No Fracture
Average 203.625 No Fracture
![Page 19: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/19.jpg)
Results (con’t)
• Once the model teeth had been broken we drilled a hole in the model and inserted the human teeth
• We were unable to obtain data from the human teeth because the models broke before the teeth fractured
![Page 20: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/20.jpg)
Jaw model after failure
![Page 21: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/21.jpg)
Competitive Analysis
• Disposable and/or Sterilizable Cushioning Device for the Laryngoscope
• Teeth Protector for Laryngoscope Blade
Free Patents Online: freepatentsonline.com
• Laryngoscope Blade with Protective Insert
![Page 22: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/22.jpg)
Competitive Analysis
• Current Solutions
(on the market)• Gauze roll
• 10/box – 10 boxes for $7.38
• Oropharyngeal Airway• ($0.70 each – in bulk $0.50
each)
• Bite Block – • BiteGard™ (50/box) ($65)• Endoscopic ($4.90 each)
• Used in approximately 2% of cases
• Our price - $1.20 per guard
BiteGard™
![Page 23: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/23.jpg)
Competitive Analysis
• Strengths • Distributes load over more teeth to decrease force on
primary tooth• Disposable• Can be universal – Mac and Miller• For emergency use
• Weaknesses• Bulky• Slipping from desired location
![Page 24: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/24.jpg)
Quality System Considerations
• Manufacturability• Simple Design
• Made out of PolyJet Tango Elastomer • Stereo lithography to simulate rubber
• Proposed Siloxane manufacturing
• Human Factors• Decrease the damage to the oral cavity caused by
intubation • Universal - Slides over Miller Blade but can be made
to slide over Mac Blade also • Easy to use• Disposable
![Page 25: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/25.jpg)
FDA Regulation
• TITLE 21--FOOD AND DRUGS • CHAPTER I—FOOD AND DRUG ADMINISTRATION DEPARTMENT OF
HEALTH AND HUMAN SERVICES • SUBCHAPTER H--MEDICAL DEVICES • PART 868 – ANESTHESIOLOGY DEVICES
• Subpart F – Therapeutic Devices • Sec 868.5820 Dental protector
• Identification: A dental protector is a device intended to protect a patient's teeth
during manipulative procedures within a patient's oral cavity • Classification: Class 1 • Class I (general controls): The device is exempt from the pre-market
notification procedures in subpart E of part 807 of this chapter subject to the limitations in 868.9
US Food and Drug Administration: http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfCFR/CFRSearch.cfm?FR=868.5820
![Page 26: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/26.jpg)
Economic Considerations
Market size• One study indicates 500,000
intubations are performed worldwide per day
• http://web.mit.edu/cortiz/www/KristinThesis.PDF
• A second study stated that 12,000 intubations were performed by paramedics per year in Pennsylvania
• This number does not include in-hospital intubations
• http://www.medicalnewstoday.com/medicalnews.php?newsid=27634
![Page 27: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/27.jpg)
Economic Considerations
• Siloxane with a shore hardness of 60 A will be manufactured by Instrumentation Industries or Injection-moldings.com• Cost = $15,000 + $0.20per• Selling price = $1.20 per guard• Potential market size =
• Earning potential
PopulationWolrdwide
US%3.4
105.6
102809
6
perYear000,845,7$)20.0)(1086.7(000,15$)20.1)($1086.7( 66
..1086.7105.182%)3.4( 66 SsUIntubationyear
sIntubation
![Page 28: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/28.jpg)
Design Alternatives
• The width is the most important component in the design
• The height was decreased to remove unnecessary material
![Page 29: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/29.jpg)
Work Breakdown
Nate
AngeloffMike
MatthewsVirginia
PenascinoSean
Ritchie
Design X X
Clinical Interviews X X X
Material Research X X
Stress Analysis X X
Prototype X X
Testing X X X X
DHF X X X X
![Page 30: Tooth Guard for the Laryngoscope University of Pittsburgh Senior Design – BioE 1160/1161 Nate Angeloff Mike Matthews Virginia Penascino Sean Ritchie April.](https://reader036.fdocuments.in/reader036/viewer/2022062620/551a215a550346862c8b474b/html5/thumbnails/30.jpg)
Acknowledgements
• Manuel Vallejo, DMD, MD • John O’Donnell, CRNA, MSN• Jim Menegazzi, PhD• Mark Gartner• Generous gift from Dr. Linda
Baker and Dr. Hal Wrigley