Tools and materials list for making as Buzzbait
1
Tools and materials for making a Buzzbait Materials 1.25 x 250mm (.051” x 10”) Stainless steel wire .5mm (.020”) Small piece of aluminium sheet 3mm (3/32”) Aluminium pop rivet 8mm (5/16”) Plastic bead 8gr (1/4oz) Drilled Barrel Weight 2 x 6mm (1/4”) Lure Eyes 12mm (1/2”) Small piece of clear heat shrink tubing 150mm (6”) Section of bicycle inner tube 1 x 5/0 Nickel plated hook Super Glue Powder coat Rubber solution glue Tools Pliers large and small Wire cutters Heavy duty scissors like kitchen or poultry 2mm (1/16”) Panel pin with end gut off and flattened on a sharpening stone Hammer Sharpening stone, diamond, water, oil of emery paper on flat surface Heat Gun Sharp scissors for cutting rubber Pins for applying glue
-
Upload
paul-adams -
Category
Documents
-
view
23.355 -
download
0
description
Alist of tools and materials required to make a buzzbait
Transcript of Tools and materials list for making as Buzzbait
Tools and materials for making a Buzzbait
Materials
1.25 x 250mm (.051” x 10”) Stainless steel wire
.5mm (.020”) Small piece of aluminium sheet
3mm (3/32”) Aluminium pop rivet
8mm (5/16”) Plastic bead
8gr (1/4oz) Drilled Barrel Weight
2 x 6mm (1/4”) Lure Eyes
12mm (1/2”) Small piece of clear heat shrink tubing
150mm (6”) Section of bicycle inner tube
1 x 5/0 Nickel plated hook
Super Glue
Powder coat
Rubber solution glue
Tools
Pliers large and small
Wire cutters
Heavy duty scissors like kitchen or poultry
2mm (1/16”) Panel pin with end gut off and flattened on a sharpening stone
Hammer
Sharpening stone, diamond, water, oil of emery paper on flat surface
Heat Gun
Sharp scissors for cutting rubber
Pins for applying glue
![PDF] Carbide Materials Brazed Tools KCemented Carbide Material Features and Applications. K3 Carbide Materials Brazed Tools K ... Carbide Materials Brazed Tools K Drill Blanks with](https://static.fdocuments.in/doc/165x107/612d50e61ecc515869421cfd/-carbide-materials-brazed-tools-kcemented-carbide-material-features-and-applications.jpg)
