Tooling and Workholding Catalogue TOO… · BT40-WF20 M6-M20 94 53 12.5 12.5 50 BT50-WF12 M3-M12...

www.ymtltd.co.uk

Tooling and Workholding Catalogue

ARFILTRAZIONI® detron

Founded by our present managing director in 1981 we are now known as one of the mostprogressive machine tool and workholding companies in the UK.

At YMT we understand that increasing your productivity requires high quality precision tooling.Our extensive tooling division provides support for all aspects of workholding and we havecarefully selected our principles to ensure high quality products at competetive prices.With a comprehensive range of tooling at YMT including Rotary tables and Spindle Tooling wecan help increase your machining capabilities and offer you unrivaled technical support.With an up to date innovative product range that is constantly improving you can rely on YMTfor all your tooling requirements.

YMT - The Complete Solution

Contents

Precision Spindle Tooling 4

Heat Shrink Machine and Tooling 14

Angle Heads and Speed Increasers 16

High Speed Spindle Tooling 17

Collets and Pullstuds 24

Workholding and Accessories 31

Driven and Static Tooling 53

Tool and Workpiece Probing Systems 66

Tool Presetting Machine 68

Oil and Mist Extraction Systems 69

CNC Rotary Tables 73

3

ARFILTRAZIONI® detron

www.ymtltd.co.ukSales & Technical Helpline • Tel: 01935 428 375 • Fax: 01935 432 684 • [email protected]

Our range of Tuscan precision spindle tooling has been carefully hand picked by our owntechnical engineering department.All of our toolholders have been chosen worldwide because of their outstanding quality,accuracy, reliability and performance to withstand the day‐to‐day demands of a modernmachine shop environment.

We are constantly updating and developing our range to keep up to date with the latestmachining applications.

From Single toolholders to complete tooling packs the Tuscan range can fulfil all of your toolingrequirements.

Precision Spindle Tooling

4



LD

LD

BT MAS 403• Balanced to 12,000rpm @G6.3

• Toolholders with 160mm GL balance to 8,000rpm @G6.3

Part No. Style Capacity L D30 BT30-ER16-055 ER16 1-10mm 55 32 BT30-ER16-100 ER16 1-10mm 100 32 BT30-ER25-055 ER25 1-16mm 55 42 BT30-ER25-100 ER25 1-16mm 100 42 BT30-ER32-060 ER32 3-20mm 60 50 BT30-ER32-100 ER32 3-20mm 100 5040 BT40-ER11M-100 ER11M 0.5-7mm 100 16 BT40-ER16-070 ER16 1-10mm 70 28 BT40-ER16M-100 ER16M 1-10mm 100 22 BT40-ER16-100 ER16 1-10mm 100 28 BT40-ER16M-160 ER16M 1-10mm 160 22 BT40-ER16-160 ER16 1-10mm 160 28 BT40-ER20-060 ER20 1-13mm 60 34 BT40-ER25-070 ER25 1-16mm 70 42 BT40-ER25-100 ER25 1-16mm 100 42 BT40-ER25-160 ER25 1-16mm 160 42 BT40-ER32-070 ER32 3-20mm 70 50 BT40-ER32-120 ER32 3-20mm 120 50 BT40-ER32-150 ER32 3-20mm 150 50 BT40-ER40-080 ER40 3-26mm 80 63 BT40-ER40-100 ER40 3-26mm 100 63 BT40-ER40-160 ER40 3-26mm 160 6350 BT50-ER16-080 ER16 1-10mm 80 32 BT50-ER16-100 ER16 1-10mm 100 32 BT50-ER16-160 ER16 1-10mm 160 32 BT50-ER25-080 ER25 1-16mm 80 42 BT50-ER25-100 ER25 1-16mm 100 42 BT50-ER25-160 ER25 1-16mm 160 42 BT50-ER32-070 ER32 3-20mm 70 50 BT50-ER32-100 ER32 3-20mm 100 50 BT50-ER32-160 ER32 3-20mm 160 50 BT50-ER40-080 ER40 3-26mm 80 63 BT50-ER40-100 ER40 3-26mm 100 63 BT50-ER40-160 ER40 3-26mm 160 63

55

ER Style Collet Chucks

LD


6


DL

DIN 69871• Standard nut version balanced to 12,000rpm @G6.3

• Mini nut version balanced to 25,000rpm @G2.5

• Toolholders with 160mm GL balanced to 8,000rpm @G6.3

Part No. Style Capacity L D40 DV40-ER16-070 ER16 1-10mm 70 32 DV40-ER16-100 ER16 1-10mm 100 32 DV40-ER16-160 ER16 1-10mm 160 32 DV40-ER16M-100 ER16M 1-10mm 100 22 DV40-ER16M-160 ER16M 1-10mm 160 22 DV40-ER25-070 ER25 1-16mm 70 42 DV40-ER25-100 ER25 1-16mm 100 42 DV40-ER25-160 ER25 1-16mm 160 42 DV40-ER32-070 ER32 3-20mm 70 50 DV40-ER32-100 ER32 3-20mm 100 50 DV40-ER32-160 ER32 3-20mm 160 50 DV40-ER40-080 ER40 3-26mm 80 63 DV40-ER40-100 ER40 3-26mm 100 63 DV40-ER40-160 ER40 3-26mm 160 63

DIN 69893 / HSK Form A• Standard nut version balanced to 15,000rpm @G6.3

• Mini nut version balanced to 25,000rpm @G2.5

Part No. Style Capacity L D63A HSK63A-ER11M-100 ER11M 0.5-7mm 100 16 HSK63A-ER16-100 ER16 1-10mm 100 28 HSK63A-ER16M-100 ER16M 1-10mm 100 22 HSK63A-ER25-090 ER25 1-16mm 90 42 HSK63A-ER25M-100 ER25M 1-16mm 100 35 HSK63A-ER25M-160 ER25M 1-16mm 160 35 HSK63A-ER32-100 ER32 3-20mm 100 50 HSK63A-ER40-120 ER40 3-26mm 120 63

D L

D L

ER Style Collet Chucks


End Mill / Side Lock Holders

BT MAS 403• Balanced to 8,000rpm @G6.3 Part No. Size L D30 BT30-SLN06-050 6mm 50 25 BT30-SLN08-050 8mm 50 28 BT30-SLN10-050 10mm 50 35 BT30-SLN12-055 12mm 55 42 BT30-SLN16-063 16mm 63 48 BT30-SLN20-070 20mm 70 5240 BT40-SLN06-050 6mm 50 25 BT40-SLN08-050 8mm 50 28 BT40-SLN10-063 10mm 63 35 BT40-SLN12-063 12mm 63 42 BT40-SLN16-035 16mm 35 48 BT40-SLN16-063 16mm 63 48 BT40-SLN20-035 20mm 35 52 BT40-SLN20-063 20mm 63 52 BT40-SLN25-035 25mm 35 62 BT40-SLN25-090 25mm 90 62 BT40-SLN32-100 32mm 100 7250 BT50-SLN06-063 6mm 63 25 BT50-SLN08-063 8mm 63 28 BT50-SLN10-070 10mm 70 35 BT50-SLN12-080 12mm 80 42 BT50-SLN16-080 16mm 80 48 BT50-SLN20-080 20mm 80 52 BT50-SLN25-100 25mm 100 65 BT50-SLN32-105 32mm 105 72


7

DL

DIN 69871• Balanced to 12,000rpm @G6.3 Part No. Size L D40 DV40-SLN06-050 6mm 50 25 DV40-SLN08-050 8mm 50 28 DV40-SLN10-050 10mm 50 35 DV40-SLN12-050 12mm 50 42 DV40-SLN16-035 16mm 35 48 DV40-SLN16-063 16mm 63 48 DV40-SLN20-035 20mm 35 52 DV40-SLN20-063 20mm 63 52 DV40-SLN25-035 25mm 35 65 DV40-SLN25-100 25mm 100 65 DV40-SLN32-100 32mm 100 72

DL

DIN 69893 / HSK Form A• Balanced to 15,000rpm @G6.3 Part No. Size L D63A HSK63A-SLN06-065 6mm 65 25 HSK63A-SLN08-065 8mm 65 28 HSK63A-SLN10-065 10mm 65 35 HSK63A-SLN12-080 12mm 80 42 HSK63A-SLN16-080 16mm 80 48 HSK63A-SLN20-080 20mm 80 52 HSK63A-SLN25-110 25mm 110 62 HSK63A-SLN32-110 32mm 110 72

D L


8

Shell Mill / Face Mill Holders


Part No. Size (D) L30 BT30-SM16-035 16mm 35 BT30-SM22-040 22mm 40 BT30-SM27-040 27mm 4040 BT40-SM16-050 16mm 50 BT40-SM16-100 16mm 100 BT40-SM22-055 22mm 55 BT40-SM22-100 22mm 100 BT40-SM27-055 27mm 55 BT40-SM27-100 27mm 100 BT40-SM32-060 32mm 60 BT40-SM32-100 32mm 100 BT40-SM40-060 40mm 60 BT40-SM40-100 40mm 10050 BT50-SM22-060 22mm 60 BT50-SM22-100 22mm 100 BT50-SM27-060 27mm 60 BT50-SM27-100 27mm 100 BT50-SM32-060 32mm 60 BT50-SM32-100 32mm 100 BT50-SM40-060 40mm 60 BT50-SM40-100 40mm 100

D L


DIN 69871• Balanced to 8,000rpm @G6.3

Part No. Size (D) L40 DV40-SM16-035 16mm 35 DV40-SM22-035 22mm 35 DV40-SM22-060 22mm 35 DV40-SM27-035 27mm 35 DV40-SM27-060 27mm 35 DV40-SM32-055 32mm 55 DV40-SM40-060 40mm 60

D L

DIN 69893 / HSK Form A• Balanced to 8,000rpm @G6.3

Part No. Size (D) L63A HSK63A-SM16-045 16mm 45 HSK63A-SM22-050 22mm 50 HSK63A-SM22-100 22mm 100 HSK63A-SM27-055 27mm 55 HSK63A-SM27-100 27mm 100 HSK63A-SM32-060 32mm 60

DL


9



Part No. Capacity L D Tens. Comp.40 BT40-WF12 M3-M12 67 36 7.5 7.5 BT40-WF20 M6-M20 94 53 12.5 12.550 BT50-WF12 M3-M12 080 36 7.5 7.5 BT50-WF20 M6-M20 102 53 12.5 12.5

DL


Part No. Capacity L D40 BT40-APU13-090 1-13mm 90 5050 BT50-APU13-105 1-13mm 105 50

DL

Rigid Tapping Holders


Part No. Capacity L D40 BT40-SF12 M3-M12 72 34 BT40-SF20 M6-M20 91 49

DIN 69871

Part No. Capacity L D40 DV40-SF12 M3-M12 59 33 DV40-SF20 M6-M20 82 50

D

L


Part No. Capacity L D40 DV40-APU13-095 1-13mm 95 50

D L

Integral Keyless Drill Chucks

Tension & Compression Tapping Holders


Part No. Size L D63A HSK63A-MTA1-100 MT1 100 25 HSK63A-MTA2-115 MT2 115 32 HSK63A-MTA3-135 MT3 135 40 HSK63A-MTA4-160 MT4 160 48


10


Morse Taper Holders


Part No. Size L D30 BT30-MTA1-050 MT1 50 25 BT30-MTA2-060 MT2 60 3240 BT40-MTA1-050 MT1 50 25 BT40-MTA2-050 MT2 50 32 BT40-MTA3-070 MT3 70 40 BT40-MTA4-090 MT4 90 4850 BT50-MTA2-060 MT2 60 32 BT50-MTA3-065 MT3 65 40 BT50-MTA4-070 MT4 70 48 BT50-MTA5-105 MT5 105 63

DL


Part No. Size L D40 DV40-MTA1-050 MT1 50 25 DV40-MTA2-050 MT2 50 32 DV40-MTA3-070 MT3 70 40 DV40-MTA4-095 MT4 95 48

DL

DL


11


DIN 69871• SK40 balanced to 25,000rpm @G6.3

• SK50 balanced to 20,000rpm @G6.3

Part No. Size L D Collet40 SK40-HY20-085 20 85 37 HY20/HY20-C SK40-HY25-110 25 110 43 - SK40-HY32-115 32 115 50.5 -50 SK50-HY20-085 20 85 37 HY20/HY20-C SK50-HY32-100 32 100 50.5 -

Precision Hydraulic Chucks

BT MAS 403• BT40 balanced to 25,000rpm @G6.3

• BT50 balanced to 20,000rpm @G6.3

Part No. Size L D Collet40 BT40-HY20-090 20 90 37 HY20/HY20-C BT40-HY25-100 25 100 43 - BT40-HY32-105 32 105 50.5 -50 BT50-HY20-105 20 105 37 HY20/HY20-C BT50-HY25-115 25 115 43 - BT50-HY32-115 32 115 50.5 -

DL


Part No. Size L D Collet63A HSK63A-HY20-100 20 100 37 HY20/HY20-C HSK63A-HY25-120 25 120 43 - HSK63A-HY32-120 32 120 50.5 -

L

L

D

D


12


Order No. Model Boring Range øDMin-øDMax

Taper Shank L1 N.W.

55901309 BT30-HBOR50 6-90 H50 MAS403 BT30-H50-45 45 6.7 55901410 BT40-HBOR50 6-90 H50 MAS403 BT40-H50-50 50 7.3 55901510 BT50-HBOR50 6-90 H50 MAS403 BT50-H50-65 65 9.9 55902309 SK30-HBOR50 6-90 H50 DIN69871A ISO30-H50-55 55 6.8 55902410 SK40-HBOR50 6-90 H50 DIN69871A ISO40-H50-50 50 7.3 55902510 SK50-HBOR50 6-90 H50 DIN69871A ISO50-H50-50 50 9.5 55904610 HSK63-HBOR50 6-90 H50 DIN69893A HSK63-H50-50 50 7.0

Order No. Cutting Bar Boring Range øDMin-øDMax

DM Insert Bolt Wrench N.W.

50160621 BR1606-21 6-9 21 WBGT0601..LSB-1STR-M2 T6

0.0450160828 BR1608-28 8-11 28 TBGT0601..L 0.04

50.05331-0153-0161RB5301610550161242 BR1612-42 12-15 42

TPGH0902..L SB-2TR-M2.5T8

0.0670.00571-4105-4161RB0541610590.00602-6106-6161RB06616105

50162065 BR1620-65 20-24 65 TPGH1103..L SB-3TR-M3 0.1121.08682-4286-4261RB86426105

50162505 BM5 　 60 + SRTP2938 or SRTP3652 or SRTP4468 M5×12CAP 4 0.2550252938 SRTP2938 29-38 +10

TPGH0902..L SB-2TR-M2.5 T80.01

20.0 21+25-632563PTRS25632305 30.0 21+86-448644PTRS86440405

50501608 BM8 　 +SRTP5790 M8×20CAP 6 0.0350505790 SRTP5790 57-90 +20 TPGH1103..L SB-3TR-M3 T8 0.10

62

H

L1

01

2 3 45

6

789

ø0.002MM

0

50

100

0

50

100

ø0.1mm

0

50

100

09

1

0

50

100

09

1

ø0.1mm

M8*

20CA

P

M8

M5*

12CA

PM

5

BM

8

6080

SRTP3652STANNY 30SRTP2938 40 50STANNY

SRTP4468STANNY

SRTP5690

lockHBOR50

01

2 3 45

6

789

ø0.002MM

DM

D

ø16

MAX 2mm MAX 2mm

Cutting Bar

BM

5H50

BM8(HBOR)

BM

5(HB

OR

)

BR

1624-68

BR

1620-65

BR

1616-60

BR

1614-50

BR

1612-42

BR

1610-35

BR

1608-28

BR

1606-21

• Boring diameter sizes range from 6mm ‐ 90mm

• 50mm Boring Head Diameter

• Available in BT40, DIN 2080, DIN 69871, HSK63A Shanks

• Fine adjustments in 0.002mm increments

• Dual dial for coarse and fine adjustments

• Standard insert kit included for general purpose machining

H - BOR50 (6-90mm capacity)

Micro Finishing Fine Boring System

Ideal for use with medical, aerospace, Formula 1 and automotive applications our boring head kit ensures high rigidity and accuracy


13


Order No. Model Boring Range øDMin-øDMax

Taper Shank L1 N.W.

56900410 NT40-HBOR63 6-150 H63 DIN2080 ISO40-H63-55 55 8.456900510 NT50-HBOR63 6-150 H63 DIN2080 ISO50-H63-65 65 10.456901410 BT40-HBOR63 6-150 H63 MAS403 BT40-H63-55 55 8.256901510 BT50-HBOR63 6-150 H63 MAS403 BT50-H63-65 65 10.856901512 BT50-HBOR63 6-150 H63 MAS403 BT50-H63-85 85 11.356902410 SK40-HBOR63 6-150 H63 DIN69871A ISO40-H63-60 60 8.356902510 SK50-HBOR63 6-150 H63 DIN69871A ISO50-H63-65 65 10.056904610 HSK63-HBOR63 6-150 H63 DIN69893A HSK63-H63-67 67 8.2

Order No. Cutting Bar Boring Range øDMin-øDMax DM Insert Bolt Wrench N.W.

50160621 BR1606-21 6-9 21 WBGT0601..LSB-1STR-M2 T6

0.0450160828 BR1608-28 8-11 28 TBGT0601..L 0.04

50.05331-0153-0161RB5301610550161242 BR1612-42 12-15 42

TPGH0902..L SB-2TR-M2.5 T8

0.0670.00571-4105-4161RB0541610590.00602-6106-6161RB06616105

50162065 BR1620-65 20-24 65 TPGH1103..L SB-3TR-M3 0.1121.08682-4286-4261RB86426105

50162505 BM5 　 60 + SRTP2938 or SRTP3652 or SRTP4468 M5×12CAP 4 0.2550252938 SRTP2938 29-38 +10

TPGH0902..L SB-2TR-M2.5 T80.01

20.0 21+25-632563PTRS25632305 30.0 21+86-448644PTRS86440405

50501608 BM8 　 +SRTP70110 or SRTP110150 M8×20CAP 6 0.0350637011 SRTP70110 70-110 +20 TPGH1103..L SB-3TR-M3 T8 0.10

12.002+051-011051011PTRS51173605

Vice Graduation Adjust the Graduation

0

50

100

09

1

0

50

100

09

1

ø0.1mm

0

50

100

0

50

100

ø0.1mm

lock

MAX 4mm MAX 4mm

01

2 3 45

6

789

ø0.002MM

SRTP365230SRTP2938 40 SRTP4468 50 SRTP4468

M5*

12C

AP

M5

110130150 SRTP110150

M8*

20C

AP

M8

7090110 SRTP70110

BM

5

BM

8

62L1

H

HBOR63

StannyStannyStanny

H63

01

2 3 45

6

789

ø0.002MM

Cutting Bar

DM

D

ø16

BM

5(HB

OR

)

BM8(HBOR)

BR

1624-68

BR

1620-65

BR

1616-60

BR

1614-50

BR

1612-42

BR

1610-35

BR

1608-28

BR

1606-21

H - BOR63 (6-150mm capacity)

Micro Finishing Fine Boring System

Ideal for use with medical, aerospace, Formula 1 and automotive applications our boring head kit ensures high rigidity and accuracy

• Boring diameter sizes range from 6mm ‐ 150mm

• 63mm Boring Head Diameter

• Available in BT40, DIN 2080, DIN 69871, HSK63A Shanks

• Fine adjustments in 0.002mm increments

• Dual dial for coarse and fine adjustments

• Standard insert kit included for general purpose machining


14

Heat Shrink Machine and Tooling

The advantages of Heat Shrink

One of the main benefits of using the heat shrink system is the ability to increase spindle

speeds without compromising rigidity. The major effect of this is reduced cycle times

which can also result in reduced machining costs. Another benefit of this process is

accurate and repeatable machining as heat shrink systems can increase the symmetry of

the tools in turn minimising the wear on spindle bearings.

SF-6000 Heat Shrink Induction System

• Suitable for BT, DIN and HSK Toolholders

• Capacity: Ø6‐32 mm

• Maximum Tool Length: 300 mm

• Heating Duration: <30 seconds

• Output Power: 6KW

• Input power: single phase 28 amp

• Weight: 26Kg

• Dimension: W: 340mm D: 470mm H: 700mm

SF-6000-CS Cooling Station

• Cooling Duration: <60 seconds

• Input power: single phase 13 amp

• Coolant Tank Capacity: 15L

• Weight: 16Kg

• Dimension: W: 400mm D: 560mm H: 215mm

Standard Accessories

Cooling Cylinder Heat Resistant Gloves Wrench Tool Tray


15

BT MAS 403• Balanced to 20,000rpm @G2.5• Runout ≤ 2µm @ nose of toolholder• Runout ≤ 3µm (3xD)Part No. D1 D2 D3 L1 L2 L3 L4 GBT40-EZ06-090 6 20 27 90 45 23 36 M5*0.8 BT40-EZ08-090 8 20 27 90 45 27 41 M6*1.0 BT40-EZ10-090 10 24 32 90 51 33 47 M8*1.25BT40-EZ10-120 10 24 32 120 36 33 47 M8*1.25BT40-EZ12-090 12 24 32 90 51 36 50 M10*1.5BT40-EZ12-120 12 24 32 120 36 36 50 M10*1.5BT40-EZ16-090 16 27 34 90 45 39 55 M12*1.75BT40-EZ20-090 20 33 42 90 57 41 57 M16*2.0BT40-EZ25-100 25 44 53 100 57 49 65 M16*2.0BT40-EZ32-100 32 44 53 100 57 49 65 M16*2.0

BT40-EZ06S-105 6 10 21.8 105 75 23 36 M5*0.8BT40-EZX06S-150 6 10 28.8 150 120 23 36 M5*0.8 BT40-EZ08S-105 8 12 23.8 105 75 27 41 M6*1.0BT40-EZX08S-150 8 12 30.8 150 120 27 41 M6*1.0BT40-EZ10S-105 10 14 25.8 105 75 33 47 M8*1.25BT40-EZX10S-150 10 14 32.8 150 120 33 47 M8*1.25BT40-EZ12S-105 12 16 27.8 105 75 36 50 M10*1.5BT40-EZX12S-150 12 16 34.8 150 120 36 50 M10*1.5

Part No. A D1 D2 L2 DV40-EZ06-080 80 6 20 36 DV40-EZ06-160 160 6 20 36 DV40-EZ08-080 80 8 20 36 DV40-EZ08-160 160 8 20 36 DV40-EZ10-080 80 10 24 42 DV40-EZ10-160 160 10 24 42 DV40-EZ12-080 80 12 24 47 DV40-EZ12-160 160 12 24 47 DV40-EZ16-080 80 16 27 50 DV40-EZ16-160 160 16 27 50 DV40-EZ20-080 80 20 33 52 DV40-EZ20-160 160 20 33 52 DV40-EZ25-100 100 25 44 58 DV40-EZ25-160 160 25 44 58 DV40-EZ32-100 100 32 44 58 DV40-EZ32-160 160 32 44 58

DIN 69871• Balanced to 15,000rpm @G6.3• Runout ≤ 2µm @ nose of toolholder• Runout ≤ 3µm (3xD)

Part No. A d1 D2 L2 HSK63A-EZ06-080 80 6 10 36 HSK63A-EZ06-160 160 6 10 36 HSK63A-EZ08-080 80 8 20 36 HSK63A-EZ08-160 160 8 20 36 HSK63A-EZ10-085 85 10 24 42 HSK63A-EZ10-160 160 10 24 42 HSK63A-EZ12-090 90 12 24 47 HSK63A-EZ12-160 160 12 24 47 HSK63A-EZ14-090 90 14 27 47 HSK63A-EZ14-160 160 14 27 47 HSK63A-EZ16-090 90 16 27 50 HSK63A-EZ16-160 160 16 27 50 HSK63A-EZ18-095 95 18 33 50 HSK63A-EZ18-160 160 18 33 50 HSK63A-EZ20-100 100 20 33 52 HSK63A-EZ20-160 160 20 33 52 HSK63A-EZ25-115 115 25 44 58 HSK63A-EZ25-160 160 25 44 58

DIN 69893 / HSK Form A• Balanced to 15,000rpm @G6.3• Runout ≤ 2µm @ nose of toolholder• Runout ≤ 3µm (3xD)

Heat Shrink Machine and Tooling

About OMG

With over 40 years within the machine tool business OMG focus on designing high quality tappingspindles, mul� spindle heads and spindle speed increasers. Whether you require higher spindlespeeds or are machining components at various angles, OMG’s con�nuous growth and developmentcan help increase your machining capabili�es.

Angle Heads

The TA range of angle heads from OMG are designed to increase the efficiency of your machine. Bychanging the angle of your tool you are able to machine parts without further workpieceplacements, therefore reducing machining �mes and costs.Suitable for use with tradi�onal machine tools and lathes with automa�c tool changes andmotorised turrets. The heat treated kinema�c mechanism and precision bearings with Gleasonbevel gears ensures high rigidity and accuracy throughout machining.

• TA series: 90˚ single spindle

• TA2 series: 90˚ dual spindles

• TAD series: single spindle with internal coolant through the tool

• TAV series: adjustable spindle from +90˚ to ‐90˚

• TAF series: the posi�on of the spindle is designed to suit your personal requirements

Spindle Speed Increasers

Designed and developed to increase your machining capabili�es without compromising rigidity andstability during milling, drilling and engraving applica�ons the MO range from OMG is the idealsolu�on for increasing your produc�vity. The compact design, heat treated steel parts and groundgears on the involute guarantee high power ra�ngs with low noise levels. Suitable for use onmachine tools with automa�c tool changes as well as manual, the MO range is a versa�le and rigidtooling solu�on.

• 18,000rpm (higher rpm available)

• Through coolant op�ons available

• Available with BT, HSK or DIN tapers

• Low maintenance‐ the speeders are lubricated with a synthe�c grease for increased tool life

• Interchangeable an�‐rota�on pin which can be adjusted to suit you personal requirements

Angle Heads and Speed Increasers

For more informa�on or a full catalogue please contact our tooling division


16


High Speed Spindle Tooling

Established in 1988; Kojex specialises in designing and manufacturing high quality tool holders,collets and collet chucks for high speed machining centres.For high speed and precision machining, Kojex presents the latest DC, UC, HEC, SD and HPCproducts to satisfy their customers requirements. Suitable for use in aerospace, Formula 1 andmedical applications, Kojex holds the record for the smallest outside nose diameter in the worldfor their mechanical collet chucks.For many years Kojex have been researching and developing ranges to withstand the problemsoften caused by high speed machining; such as deformation of the spindle and reduced grippingtorque. The constant research and development of their range and continual growth bothdomestically and around the world ensures their continued success in this high speed age.

17


18


DC Slim Chucks• Designed without nut and with inner holding collet for increased stability and rigidity

• Run Out <5µm (4xD)

• Suitable for Drilling, Milling, Tapping and Reaming

• Torque wrench is recommended for ultimate performance

• Using the correct torque wrench and torsion prevents

deformation of the tool holder

BT MAS 403

Gripping Recommended Part No. Range L L1 D Collet Min-1G2.5 Torque AdaptorBT30-DC6-60 2-6 60 26 13 DC6 30,000 5Nm 30194-5244BT30-DC6-90 2-6 90 50 13 DC6 30,000 5Nm 30194-5246BT40-DC6-90 2-6 90 45 13 DC6 30,000 5Nm 30194-5246BT40-DC6-120 2-6 120 60 13 DC6 30,000 5Nm 30194-5246BT40-DC6-150 2-6 150 76 13 DC6 30,000 5Nm 30194-5246BT40-DC12-90 3-12 90 55 34 DC12 30,000 12Nm 30194-5286

DIN 69871

Gripping Recommended Part No. Range L L1 D Collet Min-1G2.5 Torque AdaptorSK40-DC6-90 2-6 90 48 13 DC6 20,000 5Nm 30194-5246SK40-DC6-120 2-6 120 62 13 DC6 20,000 5Nm 30194-5246

DIN 69893 / HSK Form A

Gripping Recommended Part No. Range L L1 D Collet Min-1G2.5 Torque AdaptorHSK63A-DC6-95 2-6 95 45 13 DC6 30,000 5Nm 30194-5246HSK63A-DC6-120 2-6 120 53 13 DC6 30,000 5Nm 30194-5246HSK63A-DC6-150 2-6 150 80 13 DC6 30,000 5Nm 30194-5246

Torque WrenchPart No. Nm Size30194-521 5-30 3/8” Sq

AdaptorPart No. A/F L mm30194-5244 4 7530194-5246 4 10030194-5286 8 100

Fixed Torque WrenchPart No. Torque A/F L To Suit mm 30294-5144 5Nm 4 70 UC6/DC630294-5146 5Nm 4 115 UC6/DC6

Spanners, Wrenches and Adaptors must be ordered separately


19

19


UC Gold Chuck• Designed without nut and with inner holding collet for increased stability and rigidity

• Run Out <5µm (4xD)

• Suitable for Drilling, Milling, Tapping and Reaming

• Torque wrench is recommended for ultimate performance

• Using the correct torque wrench and torsion prevents

deformation of the tool holder

BT MAS 403

Gripping Recommended Part No. Range L L1 D2 D1 Collet Min-1G2.5 Torque AdaptorBT30-UC10-70 3-10 70 48 30 24 UC10 30,000 7Nm 30194-5256BT30-UC16-70 6-16 70 48 40 32 UC16 30,000 12Nm 30194-5264BT40-UC6-90 3-6 90 63 25 16 UC6 30,000 5Nm 30294-5144BT40-UC6-90T 3-6 90 63 - 15.5 UC6 30,000 5Nm 30294-5144BT40-UC10-90 3-10 90 63 32 24 UC10 30,000 7Nm 30194-5256BT40-UC10-120 3-10 120 93 36 24 UC10 30,000 7Nm 30194-5258BT40-UC10-150 3-10 150 123 40 24 UC10 30,000 7Nm 30194-5258BT40-UC16-90 6-16 90 63 40 32 UC16 30,000 12Nm 30194-5266BT40-UC16-90C 6-16 90 63 40 32 UC16 30,000 12Nm 30194-5266BT40-UC16-90F 6-16 90 63 51 40 UC16 30,000 12Nm 30194-5266BT50-UC10-110 3-10 110 72 36 24 UC10 20,000 7Nm 30194-5258BT50-UC16-100F 6-16 100 73 51 40 UC16 20,000 12Nm 30194-5268BT50-UC16-120 6-16 120 82 42 32 UC16 20,000 12Nm 30194-5268BT50-UC16-120C 6-16 120 82 42 32 UC16 20,000 12Nm 30194-5268

DIN 69871

Gripping Recommended Part No. Range L L1 D2 D1 Collet Min-1G2.5 Torque AdaptorSK40-UC10-90 3-10 90 55 32 24 UC10 20,000 7Nm 30194-5258SK40-UC16-90 6-16 90 55 40 32 UC16 20,000 12Nm 30194-5266


Gripping Recommended Part No. Range L L1 D Collet Min-1G2.5 Torque AdaptorHSK63A-UC10-90 3-10 90 64 24 UC10 30,000 7Nm 30194-5254HSK63A-UC16-110 6-16 110 84 32 UC16 30,000 12Nm 30194-5266

Through Tool Coolant - F (external collet) C (internal collet)


AdaptorPart No. A/F L mm30194-5256 5 7530194-5258 5 10030194-5264 6 7530194-5266 6 10030194-5268 6 160

Fixed Torque WrenchPart No. Torque A/F L To Suit mm 30294-5144 5Nm 4 70 UC6/DC630294-5146 5Nm 4 115 UC6/DC630294-5152 7Nm 5 55 UC10/DC830294-5154 7Nm 5 90 UC10/DC830294-5156 7Nm 5 140 UC10/DC8

Spanners, Wrenches and Adaptors must be ordered separately


20

BT MAS 403

Gripping Stop Part No. Range L L1 D H Spanner Screw Min-1G6.3BT30-SD10-60 2-10 60 38 29 30-52 30194-925 ASG-12/ASG-12H 12,000BT30-SD10-90 2-10 90 68 29 30-72 30194-925 ASG-12/ASG-12H 12,000BT30-SD16-60 4-16 60 38 41 45-58 30194-936 ASG-18/ASG-18H 12,000BT30-SD16-90 4-16 90 68 41 45-58 30194-936 ASG-18/ASG-18H 12,000BT30-SD20-60 4-20 60 37 50 - 30194-702 ASG-22/ASG-22H 12,000BT30-SD25-80 6-25 80 37 55 - 30194-703 ASG-28/ASG-28H 12,000BT40-SD10-60 2-10 60 33 29 30-60 30194-925 ASG-12/ASG-12H 12,000BT40-SD10-90 2-10 90 63 29 30-70 30194-925 ASG-12/ASG-12H 12,000BT40-SD10-120 2-10 120 70 29 30-70 30194-925 ASG-12/ASG-12H 12,000BT40-SD16-60 4-16 60 33 41 45-72 30194-936 ASG-18/ASG-18H 12,000BT40-SD16-90 4-16 90 63 41 45-82 30194-936 ASG-18/ASG-18H 12,000BT40-SD16-120 4-16 120 93 41 45-72 30194-936 ASG-18/ASG-18H 12,000BT40-SD20-60 4-20 60 33 50 50-74 30194-702 ASG-22/ASG-22H 12,000BT40-SD20-90 4-20 90 63 50 50-84 30194-702 ASG-22/ASG-22H 12,000BT40-SD20-120 4-20 120 93 50 50-84 30194-702 ASG-22/ASG-22H 12,000BT40-SD25-80 6-25 80 53 55 57-78 30194-703 ASG-28/ASG-28H 12,000BT50-SD10-100 2-10 100 62 29 30-75 30194-925 ASG-12/ASG-12H 10,000BT50-SD10-150 2-10 150 70 29 30-75 30194-925 ASG-12/ASG-12H 10,000BT50-SD16-100 4-16 100 62 41 45-85 30194-936 ASG-18/ASG-18H 10,000BT50-SD16-150 4-16 150 112 41 45-85 30194-936 ASG-18/ASG-18H 10,000BT50-SD20-100 4-20 100 62 50 50-84 30194-702 ASG-22/ASG-22H 10,000BT50-SD20-150 4-20 150 112 50 50-84 30194-702 ASG-22/ASG-22H 10,000BT50-SD25-100 6-25 100 62 55 57-88 30194-703 ASG-28/ASG-28H 10,000BT50-SD25-150 6-25 150 112 55 57-88 30194-703 ASG-28/ASG-28H 10,000

DIN 69871

GrippingPart No. Range L L1 D H Spanner Stop Screw Min-1G6.3SK40-SD10-90 2-10 90 63 29 30-70 30194-925 ASG-12/ASG-12H 15,000SK40-SD16-80 4-16 80 53 41 45-72 30194-936 ASG-18/ASG-18H 15,000


Gripping Part No. Range L L1 D Spanner Stop Screw Min-1G2.5HSK63A-SD10-100 3-10 100 74 29 30194-925 ASG-12/ASG-12H 30,000HSK63A-SD16-100 4-16 100 74 41 30194-936 ASG-18/ASG-18H 30,000HSK63A-SD20-100 4-20 100 74 50 30194-702 ASG-22/ASG-22H 30,000HSK63A-SD25-100 6-25 100 74 55 30194-703 ASG-28/ASG-28H 30,000

SpannerPart No. Fig Type30194-925 1 SP-SD1030194-936 1 SP-SD1630194-702 2 SP-SD2030194-703 2 SP-SD25

Fig 1

Fig 2


SD Plus Collet Chuck• SD Collet designed with 8° angle to increase

the gripping torque of tools

• Runout <5µm (4xD)

• Suitable for Drilling and Milling

Spanners and Stop Screws must be ordered separately


21

BT MAS 403

GrippingPart No. Range L L1 D H Spanner Stop Screw Min-1G2.5BT30-SD6-90AM 2-6 90 50 20 25-58 SP-SR20 - 30,000BT30-SD10-60AM 2-10 60 38 30 30-52 SP-SR30 ASG-12/ASG-12H 30,000BT30-SD10-90AM 2-10 90 68 30 30-72 SP-SR30 ASG-12/ASG-12H 30,000BT30-SD13-75AM 3-13 75 50 35 41-90 SP-SR35 ASG-16/ASG-16H 30,000BT40-SD6-90AM 2-6 90 50 20 25-55 SP-SR20 - 30,000BT40-SD10-90AM 2-10 90 63 30 30-70 SP-SR30 ASG-12/ASG-12H 30,000BT40-SD13-90AM 3-13 90 55 35 41-105 SP-SR35 ASG-16/ASG-16H 30,000BT40-SD16-90AM 4-16 90 63 42 45-82 SP-SR42 ASG-18/ASG-18H 30,000

DIN 69871

GrippingPart No. Range L L1 D H Spanner Stop Screw Min-1G2.5SK40-SD10-90AM 2-10 90 63 30 30-70 SP-SR30 ASG-12/ASG-12H 20,000SK40-SD16-80AM 4-16 80 53 42 45-72 SP-SR42 ASG-18/ASG-18H 20,000


Gripping Part No. Range L L1 D Spanner Stop Screw Min-1G2.5HSK63A-SD10-70AM 2-10 70 44 30 SP-SR30 ASG-12/ASG-12H 30,000HSK63A-SD10-100AM 2-10 100 74 30 SP-SR30 ASG-12/ASG-12H 30,000HSK63A-SD16-80AM 4-16 80 54 42 SP-SR42 ASG-18/ASG-18H 30,000HSK63A-SD16-100AM 4-16 100 74 42 SP-SR42 ASG-18/ASG-18H 30,000

Part No. L Collet Spanner Min-1G2.5BT40-SD20B-35 35 SD20 SP-SD20B 30,000


SD Plus Chuck - AM Type• SD Collet designed with 8° angle to increase

the gripping torque of tools


• Suitable for Drilling and Milling

SD Plus Chuck - B Type - Extra Short / Extra Strong• Suitable for Drilling and Milling Spanner - AM Type

Part No. Interior Dia SP-SR20 20SP-SR30 30SP-SR35 35 SP-SR42 42

Spanners and Stop Screws must be ordered separately

SD20 Spanner - B TypePart No. SP-SD20B


• Designed with needle roller bearing for increased clamping force


• Suitable for High Speed Milling

BT MAS 403Part No. L D d H H1 Spanner Min-1G2.5BT30-HPC12-80 80 43 12 43 60 30194-702 30,000BT30-HPC16-90 90 53 16 43 66 30194-703 30,000BT30-HPC20-90 90 57 20 47 90 30194-704 30,000BT30-HPC25-100 100 63 25 57 90 30194-704 30,000BT40-HPC12-85 85 43 12 43 60 30194-702 30,000BT40-HPC16-90 90 53 16 43 76 30194-703 30,000BT40-HPC20-90 90 57 20 47 90 30194-704 30,000BT40-HPC25-95 95 63 25 57 90 30194-704 30,000BT50-HPC12-100 100 43 12 43 170 30194-702 20,000BT50-HPC16-100 100 53 16 43 170 30194-703 20,000BT50-HPC20-100 100 57 20 47 170 30194-704 20,000BT50-HPC25-105 105 63 25 57 90 30194-704 20,000BT50-HPC25-150 150 63 25 57 90 30194-704 20,000

DIN 69893 / HSK Form APart No. L D d H H1 Spanner Min-1G2.5HSK63A-HPC12-85 85 43 12 43 60 30194-702 30,000HSK63A-HPC16-90 90 53 16 43 60 30194-703 30,000HSK63A-HPC20-105 105 57 20 47 75 30194-704 30,000HSK63A-HPC25-110 110 62 25 57 80 30194-704 30,000

BT MAS 403 GrippingPart No. Range L L1 D H Spanner Min-1G2.5BT30-HEC12B-30 3-12 30 8 42 - SP-HEC12B 30,000BT30-HEC12-50AM 3-12 50 28 42 40-55 SP-SR42 30,000BT30-HEC12-75AM 3-12 75 53 42 40-80 SP-SR42 30,000BT40-HEC12B-27 3-12 27 0 - - SP-HEC12B 30,000BT40-HEC12-60AM 3-12 60 33 422 40-70 SP-SR42 30,000BT40-HEC12-90AM 3-12 90 63 42 40-80 SP-SR42 30,000BT40-HEC12-120AM 3-12 120 93 42 40-80 SP-SR42 30,000BT50-HEC12-100AM 3-12 100 62 42 40-75 SP-SR42 20,000BT50-HEC12-150AM 3-12 150 112 42 40-85 SP-SR42 20,000

DIN 69893 / HSK Form A GrippingPart No. Range L L1 D Spanner Min-1G2.5HSK63A-HEC12B-80 3-12 80 54 42 SP-HEC12B 30,000HSK63A-HEC12-100AM 3-12 100 74 42 SP-SR42 30,000

HEC High Speed E Chuck - AM Type

• Collets specially designed for holding End Mills


• Unique design allows coolant to flow through collet slot

HPC High Speed Powergrip Chuck

SpannerPart No. Type 30194-702 SP-HPC12 30194-703 SP-HPC1630194-704 SP-HPC20/SP-HPC25 Spanner must be ordered separately

Spanner - AM TypePart No. Interior Dia SP-SR42 42 Spanner must be ordered separately

HEC12 Spanner - B TypePart No. SP-HEC12B


22


23


KMC Powergrip Chuck

• Made from high quality sub zero treated Steel


• Gripping Torque measured over 2,800Nm

• Suitable for heavy cutting

BT MAS 403

GrippingPart No. Range L D SpannerBT40-KMC32-90 6-32 90 72 30194-705BT50-KMC32-105 6-32 105 72 30194-705

BT MAS 403

Part No. ColletsSBT40-KMC32-90 C32-6, 8, 10, 12, 16, 20, 25SBT50-KMC32-105 C32-6, 8, 10, 12, 16, 20, 25

DIN 69871

Part No. ColletsSSK40-KMC32-90 C32-6, 8, 10, 12, 16, 20, 25

DIN 69871

GrippingPart No. Range L D SpannerSK40-KMC32-90 6-32 90 72 30194-705

KMC Powergrip Chuck Set

• Spanner included

SpannerPart No. Type30194-705 SP-KMC32


24Part No. d Range Steps L D

ER81-2.53-5

0.50.5

12 8.5

ER111-2.53-7

0.50.5

18 11.5

ER161-2.53-10

0.51

27.5 17

ER201-2.53-13

0.51

31.5 21

ER251-2.53-16

0.51

34 26

ER322-2.53-20

0.51

40 33

ER40 4-26 1 46 41

ER Collet Sets

Part No. Collets Quantity Steps

ER8-S 1-5 9 pcs 0.5

ER11-S 1-7 13 pcs 0.5

ER16-S 1-10 10 pcs 1

ER20-S 2-13 12 pcs 1

ER25-S 2-16 15 pcs 1

ER32-S 3-20 18 pcs 1

ER40-S 4-26 23 pcs 1

ER Rigid Tap Collets• Square drive

• Available in ER16, ER20, ER25, ER32, ER40

• ISO/DIN sizes available

ER Axial Floating Tap Collets• Square drive

• Available in ER16, ER20, ER25, ER32, ER40

• ISO/DIN sizes available

dLD

ER Collets


Collets and Pullstuds


25

DC-D Collets

• Designed to increase the clamping torque of end mills


DC-E Collets

Part No. d L D

DC-62, 2.25, 2.5, 2.75, 3, 3.25,

3.5, 3.75, 4, 4.25, 4.5,4.75, 5, 5.25, 5.5, 5.75, 6

36 9.8

Part No. d L DDC-4 2E, 3E,3.175E, 4E 31 7

DC-62E, 3E,3.175E, 4E, 5E,

6E, 6.35E 36 9.6

DC-8 3E, 4E, 6E, 8E 45 15DC-10 3E, 4E, 6E, 8E, 10E 52 19.1

DC-123E, 4E, 5E, 6E, 8E,

10E, 12E60 22

UC Collets Part No. d l L DUC6-3 3 15 42 10UC6-4 4 20 42 10UC6-6 6 25 42 10UC10-3 3 15 56.5 15UC10-4 4 20 56.5 15UC10-5 5 20 56.5 15UC10-6 6 25 56.5 15UC10-8 8 30 56.5 15UC10-10 10 35 56.5 15UC16-6 6 25 67 21UC16-8 8 30 67 21UC16-10 10 35 67 21UC16-12 12 40 67 21UC16-14 14 42 67 21UC16-16 16 45 67 21

DC-E Collet Sets

Part No. Collets QuantitySDC10E-5 3-10E 5 pcsSDC12E-6 3-12E 6 pcs

DC6-D Collet Sets

Part No. Collets QuantitySDC6-17 Ø2-Ø6 17 pcs



• Suitable for clamping all drills, reamers and taps 6mm diameter or below

• Gripping range of each collet is 0.25mm



26

• Designed to increase the clamping

torque of Endmills

• Gripping torque is 20%

more than SD‐D Collets

SD-E Collets

SD-E Collet Sets

Part No. Collets Quantity

SSD10E-5 3-10 5 pcs

SSD13E-6 3-12 6 pcs

SSD16E-7 3-16 7 pcs

SSD20E-7 4-20 7 pcs

SSD25E-7 6-25 7 pcs

Part No. d D L

SD103E, 3.175E, 4E, 5E, 6E, 8E, 10E

15.6 30

SD133E, 3.175E, 4E,

5E, 6E, 8E, 10E, 12E20.1 39

SD163E, 5E, 6E, 8E, 10E,12E,

14E, 16E24.6 45

SD20 4E, 6E, 8E, 10E, 12E 30 50

SD25 12E, 16E, 20E, 25E 35.6 57

SD-D Collets

SD-D Collet Sets

Part No. Collets Quantity

SSD10-19 2-10 19 pcs

SSD13-21 3-13 21 pcs

Part No. d Steps D L

SD10 2-10 0.5 15.6 30

SD13 3-13 0.5 20.1 39

• Through coolant version

SD-F Collets


• AA version Runout <3µm (4xD)

• A version Runout <7µm (4xD)

Part No. d D L

SD10 6F, 8F, 120F 15.6 30

SD13 6F, 8F, 10F, 12F 20.1 39

SD16 6F, 8F, 10F, 12F, 16F 24.6 45


27• Runout <5µm (4xD)

HPC Collets

HEC Collets

Part No. d L D

HPC20-6 6 54 20

HPC20-8 8 54 20

HPC20-10 10 54 20

HPC20-12 12 54 20

HPC20-16 16 54 20

HPC25-16 16 60 25

HPC25-20 20 60 25

Part No. d l L D

HEC12-3 3 15 46 20

HEC12-4 4 20 46 20

HEC12-5 5 25 46 20

HEC12-6 6 30 46 20

HEC12-8 8 34 46 20

HEC12-10 10 34 46 20

HEC12-12 12 34 46 20

ØdØD

L


KMC Collets

Part No. d L D

C32-6 6 65 32

C32-8 8 65 32

C32-10 10 65 32

C32-12 12 65 32

C32-16 16 65 32

C32-20 20 65 32

C32-25 25 65 32


• The best choice for holding End Mills!


D d

Hainbuch BZI Collets DIN Style Collets

Rigid Tap Collets -

Bilz Style

Multibore Style Collets


• 171E, 173E, 177E, 185E sizesavailable

• Round, hexagon and square bores• Soft emergency collets available

• All ISO/DIN Tap sizes available• RC1 = M3 ‐ M12• RC2 = M8 ‐ M20• Square drive

• Round, hexagon and squarebores available

• T980, W850, V120, T285, N175,M673, M677, J660


Clutch Tap Collets - Bilz Style

• All ISO/DIN Tap sizes available• CC1 = M3 ‐ M12• CC2 = M8 ‐ M20• Square drive

Hardinge Style Collets andAccessories

• 4C, 5C, 16C, 20C, 25C sizesavailable

• square bores• Soft emergency collets available

HYD Hydraulic Collets

Part No. D d D1 L L1HY20

20 4, 5, 6, 7, 8, 9, 10, 12, 14, 1625 51.5 49.5

HY20-C 31 52.3 50.5

• 32, 42, 52, 65, 80, 100 sizesavailable

• Serrated or Smooth types available • Soft emergency collets available

28

HY20 HY20‐C


29

Pullstuds

MAS 403 Solid and Through Coolant

Cincinnati - Solid

Bridgeport - Through Coolant

JIS. B6339 - Through Coolant

Part No. ISO A M L1 L D D1 D3 D4 C F33000-200 30 30° M12 23 43 16 12.5 11 7 13 -33000-100 30 45° M12 23 43 16 12.5 11 7 13 -34000-100 40 45° M16 35 60 23 17 15 10 19 -35000-100 50 45° M24 45 85 38 25 23 17 30 -34000-1001 40 45° M16 35 60 23 17 15 10 19 335000-1001 50 45° M24 45 85 38 25 23 17 30 8

Part No. ISO M D D1 D3 D4 L L1 C217-22010 40 M16 22.2 17 15 10.3 67.5 39.4 19217-22030 40 M16 22.2 17 15 10.3 64.5 36.6 18

Part No. ISO A M D D1 D3 D4 L L1 C F34000-401 40 15° M16 23 17 19 14 54 29 19 7

Part No. ISO M D D1 D3 D4 L L1 L2 C F217-22253 40 M16 23 17 19 14 54 29 23 19 7



30

Pullstuds

Mazak - Through Coolant

Part No. ISO M D D1 D3 D4 L L1 L2 C F217-22003 40 M16 21.8 17 18.79 12.44 41.25 16.25 11.17 19 734000-1510 40 M16 22 17 18.80 12.45 44.10 19.11 14.03 19 735000-1510 50 M24 35.5 25 28.96 20.83 65.2 25.2 17.58 30 10


DIN 69872 A - Through Coolant

DIN 69872 A - With O Ring and Through Coolant

Part No. ISO M D D1 D3 D4 L L1 L2 C F34000-404 40 M16 23 17 19 14 54 26 20 19 735000-404 50 M24 36 25 28 21 74 34 25 30 11.5

Part No. ISO M D D1 D3 D4 L L1 L2 C F217-21305 40 M16 23 17 19 14 54 26 20 19 7217-21306 50 M24 36 25 28 21 74 34 25 30 11.5

Part No. PullstudSP-BT30-45 33000-100SP-BT40-45 34000-100/34000-1001SP-BT50-45 35000-100/35000-1001

MAS 403 Pullstud Wrench


31

Carefully selected by our tooling division, the Tuscan range of workholding and accessories aimsto supply high quality products at competitive prices.

Supplying tooling to a variety of markets including technical, Formula 1, automotive andaerospace, we are constantly updating and developing our ranges to keep up with the latestmachining applications.

From single toolholders to complete tooling packs, the Tuscan range can fulfil all of your toolingrequirements.

Workholding and Accessories


32


Tuscan Single Station Precision Machine Vice

SSV Series

High quality and always improving on industry standards,

the Tuscan range of Single Station Machine Vices are

designed to withstand the pressure and force of CNC

machining. With a built in anti‐lift mechanism the vice

ensures accurate and repeatable machining down to microns.

• Matched bed heights for multiple vice use

• Manufactured from FCD‐60 Ductile Iron

• Machined Keyways and alignment rail for quick set ups

Part No. A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

F(mm)

G(mm)

H(mm)

Weight(Kg)

SSV-100 350 166 103.5 103.9 57.15 28.5 35 63.5 18

SSV-150 481 222 228 228 73.025 44 45 79.4 36

SSV-200 624 295 259 259 84.074 50 56 98.42 75

A B

D

GF

E

C

Adjustable Workstops

Part No.

SSV100-WS

SSV150-WS

SSV200-WS

Swivel Bases

Part No.

SSV100-SB

SSV150-SB

SSV200-SB

H

Part No.

SSV150-SWS


33


Part No. TypeWidth(mm)

Height(mm)

SSV100-HJ Hard Jaw Set 100 35

SSV100-HSJ Hard Serrated Jaw Set 100 35

SSV100-HSTJ Hard Stepped Jaw Set 100 35

SSV100-HVJ Hard Vee Jaw 100 35

SSV100-SAJ Soft Aluminium Jaw Set 100 35

SSV100-SSJ Soft Steel Jaw Set 100 35













Jaw Sets

Tenons

Part No. Size

SSV100-TEN-14mm 14mm







Single Station Vice Accessories


34


Precision Modular Vices

MV Series

Designed for precision grinding and milling the MV range of vices are

widely used with CNC and standard milling machines. The moveable jaw

is self adjusting and is made of high grade alloy steel stabilised and

hardened to ensure quality and durability.

• Parallelism of bed of vice to base: 0.02/100mm

• Parallelism of fixed jaws to bolt slots: 0.02/100mm

• Perpendicular accuracy of fixed jaws to bed of vice: 0.03/100mm

Part No.A

(mm)B

(mm)H

(mm)L

(mm)

Clamping Force(Kg)

Weight(Kg)

MV100 100 100 30 270 3000 7

MV125 150 125 40 345 3000 13

MV150 200 150 50 420 5000 26

MV150B 300 150 50 520 5000 30

MV200 200 200 60 655 6000 57


Height(mm)

MV100-HJ Hard Jaw Set 100 30

MV100-SJ Soft Jaw Set 100 30



MV150-HJJ Hard Jaw Set 150 50




Jaw Sets

Swivel Bases

MV100-SB

MV125-SB

MV150-SB

MV200-SB

* Height = Bed of Vice to top of jaw

Accessories

Standard accessories


35


Tuscan Double Station Machine Vice

DSV Series

Designed with the combination of fixed and moveable jaws the Tuscan DSV vice

has the ability to hold multiple work pieces with the same clamping force.

Hardened and ground the DSV range ensures high accuracy and rigidity.

• Capable of clamping different size

components in each station

• Clamping force equalisation

• Manufactured from FCD‐60 Dutile Iron

• Repeatability ±0.015mm

• Supplied with 18mm locating tenons

Part No. A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

Jaw Height(mm)

Weight(Kg)

DSV-100 430 90 103 101.5 63.5 38 20

DSV-150 639 125 150 123.5 82.55 45 43

Part No. Type Width (mm) Height (mm)

DSV100-HJ-S Hard Jaw Set (4pc) 100 38

DSV100-ASJ-S Alumnium Soft Jaw Set (3pc) 100 38

DSV100-SSJ-S Steel Soft Jaw Set (3pc) 100 38

DSV150-HJ-S Hard Jaw Set (4pc) 150 45

DSV150-ASJ-S Aluminium Soft Jaw Set (3pc) 150 45

DSV150-SSJ-S Steel Soft Jaw Set (3pc) 150 45

Jaw Sets

Accessories

Standard accessories


36

Parlec Double Station Machine Vice


Part No. Type Width(mm)

Height(mm)

PJS1040-100.40 Soft Jaw Set 95 40PJS1040-100.40 ST Steel Jaw Set 95 40

PJS1040-100.50 Soft Jaw Set 95 50PJS1040-150.40 Soft Jaw Set 145 40PJS1040-150.50 Soft Jaw Set 145 50

*PSSJ1040-100.40S SS Jaw Set 95 40*PSSJ1040-100.40S ST Steel SS Jaw Set 95 40

*PSSJ1040-100.50S SS Jaw Set 95 50*PSSJ1040-150.40S SS Jaw Set 145 40*PSSJ1040-150.50S SS Jaw Set 145 50



PJS1550-200.50 Soft Jaw Set 196 50*PSSJ1550-200.50 ST Steel Jaw Set 196 50

*PSSJ1550-200.75 Soft Jaw Set 196 75*PSSJ1550-150.50S SS Jaw Set 146 50

*PSSJ1550-150.50S ST Steel SS Jaw Set 146 50*PSSJ1550-150.75S SS Jaw Set 146 75*PSSJ1550-200.50S SS Jaw Set 196 50*PSSJ1550-200.75S SS Jaw Set 196 75 * PSSJ - Single Station Set includes one movable jaw and one fixed jaw


Height(mm)

PJS2000-200-100 Soft Jaw Set 194 100PJS2000-200-100 ST Steel Jaw Set 194 100

PJS2000-250-100 Soft Jaw Set 244 100PJS2000-250-100 ST Steel Jaw Set 244 100*PSSJ2000-200-100S SS Jaw Set 194 100*PSSJ2000-250-100S SS Jaw Set 244 100

Jaw Sets

Part No. Size(mm)

Weight(lbs)

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

F(mm)

G(mm)

Max clampingforce (lbs)

PWS-10402 100 31 69.85 100 400 69.86 75 370 203.20 6,000

PWS-15502 150 66 88.94 150.38 500.38 101.66 110 460 203.20 11,000

PWS-20002 200 105 115.05 197.01 676 135.10 152 609.60 203.20 16,000

• Enclosed design reduces coolant and swarf entering

the drive ensuring a longer working life

• Unique ‘full stroke control’ offset mechanism

• Base mounting holes and side rails for positioning

of vices on machine tool tables

• Supplied with machinable soft jaws to suit your applications

Accessories


37


5 Axis Machine Vice

SCVR-90A small and versatile 5 axis machine vice suitable for use with smaller workpieces.

Capable to be used in vertical and horizontal applications the SCVR‐90 is the ideal

solution for your 4th and 5th axis needs.


• Manufactured from Steel heat treated

to HRC45 and ground

• Self centering jaw mechanism

Part No. Type Height Width

SCV-100SJ Soft Jaws 40 100

5 Axis Machine Vice

SCV-100A strong and compact device suitable for 4th and 5th axis rotary table usage.

Due to it’s reversible jaws you can increase the holding capacity.


• Manufactured from FCD60 Ductile Iron

• Self centering jaw

mechanism

Accessories provided as standard

Accessories provided

as standard

Jaw Sets

Manok Stationary Chuck (1201/0006)

• Easy set‐up

• Ideal for 5th axis machining

• Repeatability <0.01mm

• 52mm Ø bar capacity


38


VM300 Vacuum Clamping System

The Vacmagic system offers all the benefits of conventional ‘vacuum pump’ based systems, but only requires standard ‘machine shop’

compressed air to activate it’s full clamping pressure. Its versatility brings the added benefit of being able to be used as a pallet changer

and fixture location device as well as a vacuum system.

• Productive ‐ Less than a 30 second change over time to increase productivity

• Accurate ‐ Repeatability ±0.13mm

• Economical ‐ No vaccum pump is required as the system uses

standard 70psi machine shop air

• Low maintenance ‐ Self cleaning valves for efficiency

• Versatile ‐ Can be used as a pallet changer and a fixture location device

• Safe ‐ Low pressure safety switch and vacuum indicator are included to

ensure suction is present at all times

• Standard accessories include ‐ Base unit, Silicone seal (10 metres),

Air pipe (5 meters), washers (4pcs), locating dowels (2pcs) and operators manual

Universal Grid Style Top Plate Plain Machinable Top Plate

* Other Sizes are available upon request

Part No. Size of base unitWeight of base unit

Maximumpallet weight

(manual lifting)

Maximumpallet weight

(lifting device)

Hold downforce

Air consumptionlitres/min

Machine T slot pitch

Dowel Locations Ø

VM300 325mmx325mmx35mm 10Kgs 30Kgs 200Kgs 702Kgs 44 150-250mm 12mm

Part No. A B C

VM300-GTP 365mm 325mm 19mm

Part No. A B C

VM300-PTP 365mm 325mm 19mm

AB

C


39

2 Jaw Hydraulic Power Chuck

Part No. Chuck size

Weight (kg)with soft top Jaws

Outside diameter Max rpm Mounting

holes PCDMounting

boltsLength

excluding jawsB206A5 6” 13.7 169 6000 104.8 6xM10 91B208A6 8” 23.6 210 5000 133.4 6xM12 103B210A8 10” 40 254 4200 171.4 6xM16 113B212A8 12” 64 304 3300 171.4 6xM16 122

3 Jaw Hydraulic Power Chuck


Accessories

Standard Soft Jaw Sets

Part No. A B C D Weight(Kg)

KSJ-06 32 30 70 12 1KSJ-08 38 35 95 14 2KSJ-10 42 40 110 16 3.5KSJ-212 50 50 129 21 6.5

B C

A

D

Part No. A B C D Weight(Kg)

KSJ-06H 50 30 72 12 2KSJ-08H 80 35 95 14 5KSJ-10H 80 40 110 16 7KSJ-212H 80 50 130 21 10.5

Extra High Soft Jaw Sets

Part No. Chuck size

Weight (kg)with soft top Jaws

Outside diameter Max rpm Mounting

holes PCDMounting

boltsLength

excluding jawsBT206A5 6” 13.3 169 6000 104.8 6xM10 91BT208A6 8” 22.6 210 5000 133.4 6xM12 103BT210A8 10” 39 254 4200 171.4 6xM16 113BT212A8 12” 60.7 304 3300 171.4 6xM16 122

• Hard jaw sets available • 1.5mm x 60° serrations


40

Part No. A1 A2 B1 B2 C D E F G H J K L M Weight(Kg) O.D.Clamping I.D.Clamping

NBK-06 220 170 58 18 130 147 45 6 3-M10 68 26 40 10 13 10.6 Ø8-160 Ø48-150NBK-08 270 210 65 20 155 172 60 6 3-M10 82 28 43 11 13 18.1 Ø11-200 Ø62-190NBK-10 315 255 73 20 190 210 80 6 3-M12 93 32 52 12 16 27.9 Ø12-250 Ø72-240NBK-12 370 305 80 22 250 285 105 5 3-M12 118 40 59 14 18 42.9 Ø15-300 Ø86-290

3 Jaw Superthin Chuck

• Flange Design for efficient loading andunloading

• Superthin design• 30° angle between the base and

handle for convenient adjustment

4 Jaw Machine Chuck

• Low profile vice body to accommodate largerworkpieces

• Adjus�ng handle is set on the front for mul�plechuck usage

3 Jaw Manual Scroll Chuck

Part No. A B C D E F G H J K L Max Speedrpm (min-1) O.D.Clamping I.D.Clamping

3DKT-05 125 58.5 95 108 32 4 3-M8x1.25P 57 24 36 8 4800 Ø3-Ø121 Ø44-Ø1203DKT-06 160 65 125 140 42 4 3-M10x1.5P 68 26 38.5 10 4200 Ø8-Ø169 Ø50-Ø1583DKT-08 200 74.5 160 176 55 4 3-M10x1.75P 82 28 43 11 3500 Ø8-Ø206 Ø58-Ø1913DKT-10 250 83 200 224 76 5 3-M12x1.75P 102 35 54.5 12 2600 Ø12-Ø266 Ø77-Ø2503DKT-12 315 94 260 286 103 5 3-M16x2P 117.5 40 56.5 14 2200 Ø15-Ø340 Ø85-Ø313

Max Gripping Dia


Max Gripping Dia

Part No. A B C D E F G H J K L M N P Q R S Weight(Kg) O.D.Clamping I.D.Clamping

MC-06 215 57 18 130 40 5.5 4-M10x1.5P 68 26 39 14 144 165 144 165 66 18 11.4 Ø4-128 Ø55-128MC-08 250 65 20 160 55 6 4-M12x1.75P 82 28 43 17 174 200 174 200 83 18 18.6 Ø5-162 Ø62-162MC-10 310 72 22 200 70 6 4-M14x2P 93 32 50 21 218 250 218 250 104 18 31.6 Ø6-200 Ø72-200MC-12 380 85 25 260 100 7 4-M16x2P 118 40 56 23 274 310 274 310 135 22 56.6 Ø10-265 Ø90-265

Max Gripping Dia

Part No. A B C D E Weight(Kg)

SJ-05 62 35 24 12.68 7.94 0.9SJ-06 73 37 26 12.68 7.94 1.3SJ-08 95 48 31 12.68 7.94 2.6SJ-10 110 48 37 19.03 12.7 3.6SJ-12 125 54 42 19.03 12.7 12.7

* Two sets of Jaws will be required for MC style chucks

A

D

C

B

Accessories

Soft Jaw Sets

B

C D A

L

HF

G

K

E

J

E


41


5C Manual Key Operated Collet Chuck

• Plain back recess (Front moun�ng)

Part No. A B Spindle noseMount

Maximum CapacityRound Hexagon Square

5C-A5 138 72 ANSI A2-5” 26.99 23.02 19.055C-A6 148 72 ANSI A2-6” 26.99 23.02 19.0516C-A5 152 85 ANSI A2-5” 41.28 35.72 28.9716C-A6 160 85 ANSI A2-6” 41.28 35.72 28.9720C-A6 203.20 101.6 ANSI A2-6” 50.80 44.45 36.0720C-A8 212.73 127 ANSI A2-8” 50.80 44.45 36.07

Part No. A B C RecessDia


5C-PB 107.20 50 126 95 26.99 23.02 19.05



CRL42-A5 143 110 ANSI A2-5” 42 36 30CRL42-A6 145 110 ANSI A2-6” 42 36 30CRL54-A6 160 138 ANSI A2-6” 53.9 50.8 41.3CRL60-A6 160 138 ANSI A2-6” 60 52 42CRL60-A8 156 138 ANSI A2-8” 60 52 42

CRL Power Collet Chuck



CRS54-A5 113 138 ANSI A2-6” 53.9 50.8 41.3CRS60-A5 107.5 138 ANSI A2-6” 60 52 42CRS66-A6 131 165 ANSI A2-6” 66.6 57.1 44.4CRS66-A8 140 140 ANSI A2-6” 66.6 57.1 44.4

QCRS80-A8 171 196 ANSI A2-8” 80 68 56

CRS Power Collet Chuck

Quick change version available

Only suitable with Mul�bore Collets

5C/16C/20C Power Collet Chucks

B

A

B A

B A

C


42


Revolving Centre

Part No. Size A B C D D1 L Accuracy Max Nose Weight (mm) Speed Angle KgsVLC-212 MT2 28 35 69 32 23 132 0.005 4,000RPM 60° 0.3VLC-213 MT3 36 44 86 41 35 166 0.005 3,000RPM 60° 0.9VLC-214 MT4 41 51 108 47 40 200 0.005 2,500RPM 60° 1.5VLC-215 MT5 54 72 136 65 52 262 0.005 2,000RPM 60° 3.8

Part No. Size A B C D D1 L Accuracy Max Nose Weight (mm) Speed Angle KgsVLC-MT3B MT3 45 55 86 53 30 186 0.005 4,000RPM 60° 1.4VLC-MT4B MT4 52 62 108 63 32 222 0.005 3,000RPM 60° 2.2VLC-MT5B MT5 67 71 136 83 40 274 0.005 2,500RPM 60° 4.5

Part No. Size A B C E L Nose Weight Angle Kgs

VLC-112 MT2 69 67 31 8 100 60° 0.2VLC-113 MT3 89 81 39 10 125 60° 0.4VLC-114 MT4 109 102.5 46 14 155 60° 0.8VLC-115 MT5 136 129.5 64 18 200 60° 2.1

High Speed Extended Nose Revolving Centre

Carbide Tipped Dead Centre

60°

E

CA

BL


43

Revolving Centre Set

Accuracy Max Nose WeightPart No. Size A B C D D1 L (mm) Speed Angle KgsVLC-312 MT2 22 36 69 32 25 127 0.008 4,000RPM 60° 0.9VLC-313 MT3 23 44 86 41 30 153 0.008 3,000RPM 60° 1.4VLC-314 MT4 23 51 108 47 32 182 0.008 2,500RPM 60° 2.0

Accuracy Max Nose WeightPart No. Size A B C D D1 L (mm) Speed Angle KgsVCS-MT3 MT3 28 55 86 53 30 167 0.008 4,000RPM 60° 1.8VCS-MT4P MT4 30 62 108 63 32 196 0.008 3,500RPM 60° 2.7VCS-MT5P MT5 34 71 136 83 40 237 0.008 2,500RPM 60° 5.1

High Speed Revolving Centre Set


• VCS‐MT3 Type

• VCS‐MT4P/VCS‐MT5P Type


44Mini Nut Collet Chuck

D1L1

D

L2

Gripping RecommendedPart No. Range L L1 D D1 Torque AdaptorST10-DC4-90 2-4 90 14 10 9 4Nm 30194-5232ST12-DC4-120 2-4 120 38 12 9 4Nm 30194-5232ST12-DC6-120 2-6 120 40 12 13 5Nm 30194-5242ST16-DC6-150 2-6 150 35 16 13 5Nm 30194-5244ST20-DC6-200 2-6 200 70 20 13 5Nm 30194-5246ST25-DC6-250 2-6 250 115 25 13 5Nm 30194-5248ST25-DC10-250 3-10 250 50 25 24 12Nm 30194-5268ST32-DC12-300 3-12 300 70 32 28 12Nm 30194-5288

Part No. Style Capacity D D1 L1 L2

ST16-ER11M-150 ER11M 0.5-7 16 16 25 125

ST16-ER16M-100 ER16M 1-10 16 22 30 70

ST20-ER16M-100 ER16M 1-10 20 22 20 70

ST20-ER20M-100 ER20M 1-13 20 28 30 70

ST25-ER20M-100 ER20M 1-13 25 28 20 80

AdaptorPart No. mm L30194-5232 3 5230194-5242 4 5230194-5244 4 7530194-5246 4 10030194-5248 4 16030194-5268 6 16030194-5288 8 160

Spanners, Wrenches and Adaptors must be

ordered separately

Standard Nut Collet Chuck

Part No. Style Capacity D D1 L1 L2

ST20-ER20-100 ER20 1-13 20 34 30 70

ST20-ER25-100 ER25 1-16 20 42 40 60

ST25-ER25-100 ER25 1-16 25 42 35 65

ST32-ER25-080 ER25 1-16 32 42 35 80

ST32-ER32-080 ER32 3-20 32 50 45 80

ST40-ER32-110 ER32 3-20 40 50 45 110

ST40-ER40-110 ER40 3-26 40 63 50 110

DC Slim Chuck


Straight Shank Tooling



45


Straight Shank Tooling

Part No. D Style Size Range L dST20-WER20-125* 20 ER20 M3-M12 125 34ST20-WF12** 20 RC1 M3-M12 105 36ST25-WF12** 25 RC1 M3-M12 105 36ST32-WF12** 32 RC1 M3-M12 105 36ST25-WF20** 25 RC2 M6-M20 145 53ST20-SF12*** 20 RC1 M3-M12 105 34ST25-SF20*** 25 RC2 M6-M20 145 53

* Axial compensation only style ** Tension and compression style *** Rigid style dL

D

Part No. L L1 D D1BC20-SD6-120 120 20 20 20BC20-SD6-150 150 20 20 20BC20-SD6-180 180 20 20 20

Part No. Collets PiecesSBC20-SD6-120 SD6-3E, 4E, 6E 3SBC20-SD6-150 SD6-3E, 4E, 6E 3SBC20-SD6-180 SD6-3E, 4E, 6E 3

SD Plus Collet Chuck Sets

SD Plus Chuck

Tapping Holders

DC Collet Chuck Sets

Part No. Collets PiecesSST10-DC4-90 DC4-2E, 3E, 4E 3SST12-DC4-120 DC4-2E, 3E, 4E 3SST12-DC6-120 DC6-3E, 4E, 6E 3SST16-DC6-150E DC6-3E, 4E, 6E 3SST20-DC6-200 DC6-3E, 4E, 6E 3SST25-DC6-250 DC6-3E, 4E, 6E 3SST25-DC10-250 DC10-3E, 4E, 6E, 8E, 10E 5SST32-DC12-300 DC12-3E, 4E, 6E, 8E, 10E, 12E 6


46

B

A

C


Part No. A B C Overall Length40/06/75 40 6 70 7540/08/75 40 8 70 7540/10/75 40 10 70 7540/12/75 40 12 70 7540/16/75 40 16 70 7540/20/75 40 20 70 7540/25/75 40 25 70 7540/32/75 40 32 70 75

Part No. A B C Overall Length32/06/63 32 6 58 6332/08/63 32 8 58 6332/10/63 32 10 58 6332/12/63 32 12 58 6332/16/63 32 16 58 6332/20/63 32 20 58 6332/25/63 32 25 58 63

Part No. A B C Overall Length25/06/54 25 6 49 5425/08/54 25 8 49 5425/10/54 25 10 49 5425/12/54 25 12 49 5425/16/54 25 16 49 5425/20/54 25 20 49 54

Boring Bar Sleeves - Short Head Style

• Hardness 58‐60 HRC

• Precision Ground

• Knurled Head

25mm Outside Diameter Sleeves




47


Part No. A B C Overall TypeLength

CJ-3016E 40 6 89 130 GSCJ-3016C 40 8 89 130 GSCJ-3016D 40 10 89 130 GSCJ-3016A 40 12 85 100 GSCJ-3016B 40 16 85 100 GSCJ-3014A 40 20 85 100 GS/SCJ-3014B 40 25 85 100 GS/SCJ-3014C 40 32 85 100 GS/SCJ-3009 40 MT1 82 87 SCJ-3010 40 MT2 82 87 SCJ-3011 40 MT3 82 87 S


CF-3052E 32 6 73 85 GSCF-3052D 32 8 73 85 GSCF-3052B 32 10 85 100 GSCF-3052A 32 12 85 100 GSCF-3052C 32 16 85 100 GSCF-3055A 32 20 85 100 SCF-3055B 32 25 85 100 SCF-3054 32 MT1 75 85 SCF-3053 32 MT2 75 85 S


CL-3753E 20 6 60 67 GSCL-3753A 20 8 60 67 GSCL-3753B 20 10 60 67 GSCL-3753C 20 12 60 67 GSCL-3753D 20 16 60 67 S




Boring Bar Sleeves

* GS - Grub Screw Style* S - Slotted Style

B

A

C

Standard TighteningFixture

• TF‐30• TF‐40• TF‐50

Tilting TighteningFixture

• TBS‐30• TBS‐40• TBS‐50


Tool Tightening Fixtures

Efficient

• Push bu�ons for quick changeover �mes

Tool Tightening Fixture

A high quality industrial �ghtening fixture to increase therigidity of your toolholders. With 8 toolholder posi�ons thefixture ensures strong gripping power for your cu�ng tools


48

2 StationTightening Fixture

• VTG‐BT40• VTG‐SK40

Tilting TighteningFixture

• HL‐HSK40• HL‐HSK50• HL‐HSK63

Durable

• Heavy Duty fixture designed to be bench mounted for maximum

leverage and usage.

Flexible

• Full 360˚ movement in 45˚ increments for easy �ghtening of the Pullstud as well as

the Toolholder

• Fully interchangeable adaptors to suit HSK, DIN and BT toolholders

Part No. DescriptionTCP-BT30 BT30 AdaptorTCP-BT40 BT40/DV40 AdaptorTCP-BT50 BT50 Adaptor

TCP-HSK-A-63 HSK63 Adaptor

Part No.TCP-150

Keyless Drill Chucks

• Heavy duty keyless drill chucks ‐ 0‐13mm ‐ JT6• Integral keyless drill chucks ‐ 3‐16mm 25mm shank

5C Pneumatic Collet Block

• Suitable for use with 5Ccollets

• Supplied with or withoutmounting flange

• Pneumatic clamp/unclamp

HSK Coolant Tube Coolant Tube Wrench

T Slot Clamp Set

• CK‐3714‐T slot size 14mm• CK‐3718‐T slot size 18mm• CK‐3720‐T slot size 20mm

Trueborer

• For precise boring of softjaws

• ES16= 125‐200mm• ES25= 250‐315mm

5C Collet Block Set

• 5C‐CBS• To hold round, hexagon

and square workpieces


49


52 Piece Clamp Kits

• CK104B‐5⁄8˝ Tenon, 1⁄2˝ Studding• CK12A‐14mm Tenon, 12mm Studding• CK14‐16mm Tenon, 14mm Studding• CK16‐18mm Tenon, 16mm Studding• CK20‐22mm Tenon, M20 Studding

T Nuts

• Heat treated to HRC 30° ‐ 35°• Black Oxide surface finish

Part No. A B C D E F

PT06-1210 18 14 11.8 8 M10 22PT06-1412 22 16 13.8 8 M12 28PT06-1612 25 16 15.8 8 M12 28PT06-1812 28 20 17.7 10.5 M12 30PT06-1816 28 20 17.7 10.5 M16 30

Part No. L D HHSK63A-T17 72 19 17

Part No. L L1 D MHSK63A-M18 36 11.4 12 M18x1.0


50

HP-50A

HP-50ZM

Swarf Fans20mm Dia Shank


Spindle Taper WipersT Slot Cover Sets

80.360.00FHN

HP-100

VPS-20B

HP-50AM

• 30160 ‐ 160mm Dia• 30260 ‐ 260mm Dia• 30330 ‐ 330mm Dia

• ISO30‐TW• ISO40‐TW• ISO50‐TW

• VST‐18 ‐ T slot size 18mm• 6pcs ‐ 450mm length

Zero Presetter

• Suitable for CNC lathesand milling machines

• Non Magnetic• Dial gauge for easy

reading• Height 50mm ±

0.005mm

Height Presetter

• Magnetic base• LED display for accuracy• Suitable for CNC lathes

and milling machines• Height 50mm ±

0.005mm

Height Presetter

• Magnetic base can beswitched on/off to suityour application

• Dial gauge• Height 100mm ±

0.005mm

Electronic Edge Finder

• LED display and audiblealarm

• ø20mm Shank• ø10mm ball diameter• Accuracy ± 0.005mm

Zero Presetter

• Suitable for CNC lathesand milling machines

• Magnetic base• Dial gauge for easy

reading• Height 50mm ±

0.005mm

Universal 3D Sensor

• For accurate threedimensional alignmentof your workpiece

• Can approach from X,Y,Z• Accuracy within

0.005mm• Replacement stylus

available

Bar Puller

• 0 ‐ 52mm Capacity• 25mm diameter shank


51


Bench Top Toolholder Stands

Stations• BS‐ISO30 24• BS‐ISO40 24• BS‐ISO50 15• BS‐HSK63A 18

Toolholder Racks

Stations• VTTR‐BT30 8• VTTR‐BT40 7• VTTR‐BT50 5

Tooling Cabinets

Stations• VTT‐5‐30 32• VTT‐5‐40 28• VTT‐5‐50 20

Storage Solutions

Workstations and Tooling Cabinets

We can tailor storage solutions to suit your specific needs. A comprehensive range of drawer cabinets,

workststions, trolleys, containers and racking are also available upon request.

Pivot Clamp Sets

• VCB‐404‐T slot size 16mm• VCB‐405‐T slot size 18mm• 2 piece set

Universal Workstops

• T slot size 16mm• Maximum height

0‐150mm

Wrenches

• ER standard and mininut wrenches available


52


DM-213 Drill Grinding Machine• Double bearings for reduced wear• CBN diamond wheel• ER20 collet set 2‐13mm (12pcs) included• Adjustable trimming angle

Part No. DM-123

Capacity 2mm-13mmPoint Angle 85° - 140°

Power Supply AC 220v single phaseMotor 90wR.P.M 6000rpm

Weight 10kgL x W x H 305 x 172 x 180

Drill / End Mill Grinding Machines

Used to ensure accuracy and produc�vity and to increase the life of your tooling

GH-413 End Mill Grinding Machine• Alignment base and block• SDC and CBN diamond wheel suitable for 2, 3 and 4 flute tools• ER20 collet set 4‐13mm (10pcs) included

Part No. GH-413

Capacity 4mm-13mmPower Supply AC 220v single phase

Motor 450wR.P.M 6000rpm


DM-1226 Drill Grinding Machine• Double bearings for reduced wear• CBN diamond wheel• ER40 collet set 12‐26mm (15pcs) included• Adjustable trimming angle

Part No. DM-1226

Capacity 12mm-26mmPoint Angle 85° - 140°

Power Supply AC 220v single phaseMotor 450wR.P.M 4000rpm



Driven and Static Tooling

With over 30 years of experience within the machine tool market Algra are rapidly becomingone of the UK’s leading CNC static and driven tooling suppliers. Based in Italy in the town ofAlmenno San Salvatore, Algra are dedicated to researching and developing their expandingproduct range.

In todays demanding market turned components are becoming more and more complex andthe quality of the finished workpiece is only as good as the tooling used. Algra dedicates a largeamount of time ensuring their products are of the highest quality without compromising thecost.

Their continuous advances within the market, including their test rapid range has allowed themto ensure flexibility, quality and reliability to all their customers.

53

Presetting DeviceExternal Nut

Part No. TypeRYE-ER20 ER20RYE-ER25 ER25RYE-ER32 ER32RYE-ER40 ER40

For added efficiency preset

your tools off the machine


54


External ER Adaptors

Part No. Output (L) mmER20 RTE ER20-ER16 ER16 31.0

RTE ER20-ER20 ER20 35.0ER25 RTE ER25-ER16 ER16 35.0

RTE ER25-ER20 ER20 36.0RTE ER25-ER25 ER25 39.0

ER32 RTE ER32-ER16 ER16 36.0RTE ER32-ER20 ER20 37.5RTE ER32-ER25 ER25 44.0RTE ER32-ER32 ER32 44.0

ER40 RTE ER40-ER16 ER16 34.0RTE ER40-ER20 ER20 38.0RT1 ER40-ER25 ER25 39.5RTE ER40-ER32 ER32 41.5RTE ER40-ER40 ER40 43.5

External Shell Mill Adaptors

Part No. Output (L) mmER25 RTE ER25-PF16 DIN6358-Ø16 34.0ER32 RTE ER32-PF16 DIN6358-Ø16 34.0ER40 RTE ER40-PF16 DIN6358-Ø16 35.0

Test Rapid

External Nut Adaptors

The latest addition to Algra’s vast range of tooling accessories. The Test Rapid system is designed for the adaption of rotary live

toolholders on a driven tool lathe. It has been developed to increase the efficiency and flexibility of the lathe by adapting the driven

tool itself. The interchangeable adaptors are precisely ground for accuracy and stability and are versatile enough to be used in many

different types of driven tool holders.

External Weldon Style Adaptors

Part No. Output (L) mmER20 RTE ER20-PW10 DIN1835-B10 37.0ER25 RTE ER25-PW10 DIN1835-B10 34.0

RTE ER25-PW12 DIN1835-B12 38.0RTE ER25-PW16 DIN1835-B16 40.0

ER32 RTE ER32-PW10 DIN1835-B10 38.5RTE ER32-PW12 DIN1835-B12 41.0RTE ER32-PW16 DIN1835-B16 46.5RTE ER32-PW20 DIN1835-B20 50.0

ER40 RTE ER40-PW10 DIN1835-B10 32.0RTE ER40-PW12 DIN1835-B12 41.0RTE ER40-PW16 DIN1835-B16 43.0RTE ER40-PW20 DIN1835-B20 45.0RTE ER40-PW25 DIN1835-B25 47.0

• Increased efficiency: The Algra Test rapid adaptors are interchangeable

and can be used in most driven tools

• Increased accuracy: Precisely ground for accuracy and stability

• Reduced costs: The spindle of your already existing driven tool can be

adapted to suit your requirements instead of investing in a completely

new driven tool system

How it Works

1: The precisely ground adaptoris placed into the driven tool

2: Adaptor is tightened using a spanner


Internal Weldon Style Adaptors

Part No. Output (L) mmER20 RTI ER20-PW10 DIN1835-B10 37.0ER25 RTI ER25-PW10 DIN1835-B10 30.0

RTI ER25-PW12 DIN1835-B12 32.0RTI ER25-PW16 DIN1835-B16 34.0

ER32 RTI ER32-PW10 DIN1835-B10 36.0RTI ER32-PW12 DIN1835-B12 37.0RTI ER32-PW16 DIN1835-B16 41.0RTI ER32-PW20 DIN1835-B20 46.5

ER40 RTI ER40-PW10 DIN1835-B10 30.0RTI ER40-PW12 DIN1835-B12 39.0RTI ER40-PW16 DIN1835-B16 43.0RTI ER40-PW20 DIN1835-B20 41.0RTI ER40-PW25 DIN1835-B25 45.0

Presetting DeviceInternal Nut

Part No. TypeRYI-ER20 ER20RYI-ER25 ER25RYI-ER32 ER32RYI-ER40 ER40

• Increased efficiency: The Algra Test rapid adaptors are interchangeable

and can be used in most driven tools

• Increased accuracy: Precisely ground for accuracy and stability

• Reduced costs: The spindle of your already existing driven tool can be

adapted to suit your requirements instead of investing in a completely

new driven tool system

For added efficiency preset

your tools off the machine

How it Works

1: The precisely ground adaptoris placed into the driven tool

2: Adaptor is tightened using a spanner


55

Internal ER Adaptors

Part No. Output (L) mmER20 RTI ER20-ER16 ER16 31.0

RTI ER20-ER20 ER20 35.0ER25 RTI ER25-ER16 ER16 33.0

RTI ER25-ER20 ER20 34.0RTI ER25-ER25 ER25 37.0

ER32 RTI ER32-ER16 ER16 34.0RTI ER32-ER20 ER20 36.5RTI ER32-ER25 ER25 41.0RTI ER32-ER32 ER32 41.0

ER40 RTI ER40-ER16 ER16 32.0RTI ER40-ER20 ER20 36.0RTI ER40-ER25 ER25 37.0RTI ER40-ER32 ER32 39.0RTI ER40-ER40 ER40 41.0

Internal Shell Mill Adaptors

Part No. Output (L) mmER25 RTI ER25-PF16 DIN6358-Ø16 36.0ER32 RTI ER32-PF16 DIN6358-Ø16 32.0ER40 RTI ER40-PF16 DIN6358-Ø16 33.0

Test Rapid

Internal Nut Adaptors

The latest addition to Algra’s vast range of tooling accessories. The Test Rapid system is designed for the adaption of rotary live

toolholders on a driven tool lathe. It has been developed to increase the efficiency and flexibility of the lathe by adapting the driven

tool itself. The interchangeable adaptors are precisely ground for accuracy and stability and are versatile enough to be used in many

different types of driven tool holders.


56


S1-DIN 5482 S3-DIN 5480 B-Baruffaldi D-DIN 1809

• Available with 16, 20, 30, 40 and 50 diameter shanks

• Enclosed design to protect the system from swarf and coolant

VDI Driven Tooling

The Driven VDI system from Algra is a quick change clamping method for CNC toolholders. The range has been developed to increase

productivity by reducing the change over time in your VDI turret. Precision ground the VDI systems ensure high rigidity and accuracy

All of the above items are suitable for the following Machine and Turret manufacturers

• Colchester • Emag • Hardinge • Plus many more. . .

• Ecoca • Spinner • Baruffaldi

• Emco • Victor • Duplomatic

• DMG • Gildemeister • Sauter

VDI Static Tooling

With a comprehensive line of Algra VDI static tools you can customise your turret to suit your application needs


57

At YMT we have a vast range of driven tools available, for example the Base Mounting Tool

coupling from Algra is a versatile and light weight driven tool. It’s robust and quality design is

suitable for use with many different types of machines including Doosan and Hyundai.

Axial External Coolant

Suitable for the following machines

• Doosan: Puma Lynx 220, Puma 230/240/280/1500, 2000, 2500 MX

1600/2100TT 1500/1800

• Hyundai: SKT 160, 180, 200, 250, 300

• Hwacheon: Cutex 160, 240, T2, Hi Tech 300, 400, VT450

Part No. d1 ER l1 l2 l3 M2Nm

N2min-1

Pkw

RAPPS.25.121.UT45 45 25 52-56.5 25 2 35 8000 6RAPPS.25.121.UT55 55 25 52-56.5 25 2 40 8000 8RAPPS.32.121.UT65 65 32 68-72.5 32 9 70 6000 10RAPPS.40.121.UT75 75 40 84-89.5 51 20 100 4000 12RAPPS.50.121.UT85 85 50 110-118 60 18 150 3200 15

Internal Coolant and High Transmission versions available

Radial External Coolant

Part No. d1 ER l1 l2 h1 h2 h3 M2Nm

N2min-1

Pkw

RRPPS.25.121.UT45 45 25 65 95 80-84.5 55 29 35 8000 6RRPPS.25.121.UT55 55 25 60 90 80-84.5 55 29 40 8000 8RRPPS.32.121.UT65 65 32 72 107 89-93.5 57 31 70 6000 10RRPPS.40.121.UT75 75 40 60 104 107-111 74 44 100 4000 12RRPPS.50.121.UT85 85 50 85 137 138-146 83 46 150 3200 15



BMT coupling - Doosan - Hyundai - Hwacheon


• Doosan: Puma Lynx 220, Puma 230/240/280/1500, 2000, 2500 MX

1600/2100TT 1500/1800

• Hyundai: SKT 160, 180, 200, 250, 300



58

Double Radial External Coolant

High Transmission versions are available


Adjustable Angle External Coolant

Part No. d1 ER l1 l2 h1 h2 h3 h4 M2Nm

N2min-1

Pkw

RRPPT.25.121.UT45 45 25 65 95 80-84.5 80-84.5 40 40 35 8000 6RRPPT.25.121.UT55 55 25 60 90 80-84.5 80-84.5 40 40 40 8000 8RRPPT.32.121.UT65 65 32 72 107 89-93.5 89-93.5 37 46 70 6000 10RRPPT.40.121.UT75 75 40 60 104 107-111 107-111 54 54 100 4000 12



• Doosan: Puma Lynx 220, Puma 230/240/280/1500,

2000, 2500 MX 1600/2100TT 1500/1800

• Hyundai: SKT 160, 180, 200, 250, 300


BMT coupling - Doosan - Hyundai - Hwacheon


• Doosan: Puma Lynx 220, Puma 230/240/280/1500,

2000, 2500 MX 1600/2100TT 1500/1800

• Hyundai: SKT 160, 180, 200, 250, 300


Part No. d1 ER l2 l3 l4 M2Nm

N2min-1

Pkw

ROPPS.20.121.UT45 45 20 65 48-52.5 37 15 8000 3ROPPS.20.121.UT55 55 20 65 48-52.5 37 15 8000 3ROPPS.25.121.UT65 65 25 75 63-67.5 42 25 6000 4ROPPS.25.121.UT75 75 25 75 63-67.5 42 25 6000 4ROPPS.32.121.UT85 85 32 115 48-52.5 50 50 4000 6


59

G1 coupling - Goodway


• Goodway GTS 100 M, MX, MMX, GTS 150 M, MX, MMX

Part No. d1 ER l1 l2 l3 h1 M2Nm

N2min-1

Pkw

RAPPS.20.121.UG1 42h6 20 40 26.5 2.5 62 25 6000 6


Part No. d1 ER l1 l2 h1 h2 M2Nm

N2min-1

Pkw

RRPPS.20.121.UG1 42h6 20 60 87 58 46 25 6000 6




• Goodway GTS 100 M, MX, MMX, GTS 150 M, MX, MMX


60


N2min-1

Pkw

RAPPS.32.121.UG3 63 32 53 36 8 92 70 6000 10



• Goodway GTS 200 MMY / GTS260XY


N2min-1

Pkw

RRPPS.32.121.UG3 63 32 70 106 71 53 10 70 6000 10

Internal Coolant versions are available

Internal Coolant versions are available



As the Uk distributor of Goodway machine tools, YMT offer a comprehensive range of driven tools suitable for Goodways.



• Goodway GTS 200 MMY / GTS260XY


61


• Goodway GS2000, 2600, 2800, 3000, 3300, 3600


N2min-1

Pkw

RAPPS.40.121.UG4 60 40 87.5-92 51 26 108 70 6000 10



N2min-1

Pkw

RRPPS.40.121.UG4 60 40 90 129 101-105 67 40 70 6000 10

Internal Coolant versions available






• Goodway GS2000, 2600, 2800, 3000, 3300, 3600


• Goodway GS2000, 2600, 2800, 3000, 3300, 3600




N2min-1

Pkw

RRPT.40.121.UG4 60 40 90 129 101-105 101-105 48 48 70 6000 10


62


• Mori‐Seiki ZL‐DL200‐250 (MC)

SL 200‐203‐204‐250‐253‐254 (MC SMC) ‐ 2500Y

• CMZ TL20M‐MS‐TM, TL 25AM‐AMS‐BM‐BMS

• Goodway GS 200‐260‐280, GA 2000‐2600‐2800‐3000‐3300‐3600

Part No. ER l1 l2 l3 h1 h2 M2Nm

N2min-1

Pkw

RAPPS.32.121.UMS 32 55.5-60 30 -3 20 37 70 6000 10




Part No. ER l1 l2 l3 h1 h2 h3 h4 M2Nm

N2min-1

Pkw

RRPPS.32.121.DMS 32 27 55 90 20 89-93.5 57 31 70 6000 10


MS coupling - Mori-Seiki - CMZ - Goodway




SL 200‐203‐204‐250‐253‐254 (MC SMC) ‐ 2500Y


• Goodway GS 200‐260‐280, GA 2000‐2600‐2800‐3000‐3300‐3600


63


Part No. ER l1 l2 l3 h1 h2 h3 h4 M2Nm

N2min-1

Pkw

RRPPS.32.121.RMS 32 27 55 90 20 89-93.5 57 31 70 6000 10

High Transmission version available

Part No. ER l1 l2 l3 h1 h2 h3 h4 h5 M2Nm

N2min-1

Pkw

RRPPT.32.121.UMS 32 27 55 90 20 89-93.5 89-93.5 37 46 70 6000 10


Internal Coolant version available

Part No. ER l1 l2 l3 l4 l5 h1 h2 M2Nm

N2min-1

Pkw

ROPPS.20.121.UMS 20 25 35 66 56 37.5 20 31 25 6000 6




SL 200‐203‐204‐250‐253‐254

(MC SMC) ‐ 2500Y


• Goodway GS 200‐260‐280, GA 2000‐2600‐2800‐3000‐3300‐3600

MS coupling - Mori-Seiki - CMZ - Goodway





SL 200‐203‐204‐250‐253‐254

(MC SMC) ‐ 2500Y


• Goodway GS 200‐260‐280, GA 2000‐2600‐2800‐3000‐3300‐3600



SL 200‐203‐204‐250‐253‐254

(MC SMC) ‐ 2500Y


• Goodway GS 200‐260‐280, GA 2000‐2600‐2800‐3000‐3300‐3600


64



N2min-1

Pkw

RAPPS.32.121.UN1 55 32 67.5-72 32 9 74 70 6000 10



N2min-1

Pkw

RRPPS.32.121.UN1 55 32 55 87 89-93.5 58 31 70 6000 10


N2min-1

Pkw

RRPPT.32.121.UN1 55 32 55 87 89-93.5 89-93.5 37 46 70 6000 10




N1 coupling - Nakamura



• Nakamura TW10, WT 150, WTW 150,

WTS 150, WT 200, WT 250

TMC 2011, SUPER NTJ, SUPER NTJX, NTM 3, SC 250



WTS 150, WT 200, WT 250




WTS 150, WT 200, WT 250


Part No. ER M2Nm

N2min-1

Pkw

RAPPS.25.121.UM45 25 35 6000 6Radial External Coolant



M45 coupling - Goodway - Miyano



• Goodway GLS 1500‐2000

• Miyano ABX 51/64


65

Part No. ER M2Nm

N2min-1

Pkw

RRPPS.25.121.UM45 25 35 6000 6




Part No. ER M2Nm

N2min-1

Pkw

ROPPS.20.121.UM45 20 15 6000 3




Heidenhain TT140 Tool Measuring Probe

The TT140 three dimensional touch trigger probe from Heidenhain is the ideal solu�on for measuring tools, measuring tool wear and even detec�ng tool breakage. High precision machining requires exact measurements of tools, the TT140 trigger signal isgenerated through a wear free op�cal switch that ensures high reliability. Equipped with a breakage stem in the event of a collisionthe TT140 is a robust and compact probing device.

• Automa�c in cycle measurements of actual tool length and tool radius

• Suitable for measurement of the tool whilst in spindle

• Tool breakage detec�on

• In case of accidental collision the TT140 is equipped

with a breakage stem

Heidenhain TS640 Touch Probe

The Heidenhain touch probe can eliminate the �me consuming task of manual workpiece alignment. Simply probe two pointstogether either manually or under program control. If your NC control supports touch probes it will electronically compensate themeasured misalignment. The TS generates a signal that is transmi�ed either by cable or via infrared beam to the control. The controlthen saves the actual posi�on values as previously measured by your machine axis encoders and uses this informa�on for furtherprocessing.

• Standard touch probe with wide range infrared transmission

• HTL signal levels via SE transceiver unit

• Repeatability to ≤ 1μm

• Accuracy ≤ ± 5μm for a standard stylus

• Infrared transmission with 360˚ range

Blum NT Laser Probe

The Blum NT laser tool measuring probe is the leading solu�on for machine laser tool se�ng and tool breakage detec�on in CNCmachining centres. For reliable tool measurement, the tool is posi�oned into the laser beam and then measured out of beam. Amicroprocessor is integrated into the laser system to avoid any measuring errors. The high quality laser, strong mechanical designand intelligent electronics all guarantees reliability and high accuracy.

• Pre aligned laser

• Offered in lengths between 150mm and 1000mm

• Compact and rugged design

• Hybrid laser to reach absolute accuracy limits

• Low air consump�on


66

Tool and Workpiece Probing Systems

Blum TC50 Touch Probe

Unlike conven�onal touch probes the TC50 doesn’t use the 3 point contact measuring principles or high sensi�ve switchingelements. Therefore the TC50 guarantees the highest accuracy and superior measuring speeds in all approach direc�ons. Thecompact and robust design of the TC50 can withstand fast accelera�on and rapid movement without false trigger signals bydeflec�on of the system or mechanical damage.

• Mul� direc�onal probe

• Repeatability to 0.3μm

• Max speed 3m/min

• Self centring stylus

• Accurate probing even under heavy coolant pollu�on

Renishaw TS27R Tool Measuring Probe

The compact, table mounted tool se�ng probe is suitable for use on ver�cal and horizontal machining centres. Designed to enablethe user to set the tool length and diameter of rota�ng tools, the probe can also carry out broken tool detec�on. Convenientlylocated at the edge of the table the TS27R can be fixed either to a T slot in the machine bed or mounted on a pillar. Protected by aweak link preven�ng probe damage in the event of a collision the TS27R is ideal for the machine tool environment.

• Suitable for se�ng tool lengths in Z

• Se�ng rota�ng tools in X and Y for radius offsets

• Tool breakage detec�on

• Tool prese�ng prior to machining

• Disc and Square Styli available

• Can be fixed to a T slot or onto a pillar

Renishaw OMP40-2 Touch Probe

Known globally for their core skills in measurement, mo�on control, spectroscopy and precision machining Renishaw arecon�nuously developing their range of tooling probes. The OMP40‐2 touch probe is the upgrade of the mul�ple award winningOMP40. The technological developments significantly advances the opera�onal performance. This includes the 360˚ op�caltransmission system allowing probe opera�on in any spindle orienta�on.Measuring just Ø40mm and 50mm in length the OMP40‐2 is an ultra compact and accurate probing solu�on.

• Improved transmission protocol

• Compact design without compromising performance

• Simplified installa�on, ideal for retrofi�ng

• Long ba�ery life for minimal down�me

• Simple and safe programming

• Shock and vibra�on resistant


67

Tool and Workpiece Probing Systems

Technical Information

• Touch panel display for quick and easy operation

• Non‐contact measurement 5, 7” TFT LCD touchscreen

magnification: X20

• Rapid and accurate measurement‐dual movement manual rapid or

handwheel

• Machine structure manufactured from high quality steel offering

high mechanical resistance and increased durability

• Base and column manufactured from natural granite for high stability

and rigidity

• Double re‐circulating ball bearing slides lubricated for life

• Constant load via Archimedean spiral spring

• ISO40 fixed rotating spindle. HSK, Capto and VDI adaptors

are available on request

• Resetting gauge 04B123 (optional extra)

• Standard accessories include printer and operators

manual

• Dimensions: L: 512mm D: 406mm H: 827mm

Tool Data Transfer ‘DPP’

• PC based processor system‐ converts tools data to NC code

(existing pc network required limited to 20 uses)

• DPP system allows for back up and restore of both machine and tool data

stored on presetter

• Automatic measurement (Automatic scanning of the tool edge with

focus indicators)

• Standard software ‐ 9CNC machine origin and adaptors

• 9 tool lists (99 tools per list)

• Limited to 20 uses (optional dongle required)

Measuring Range Reading Increments

Part No. X axis diameter of tool Z axis lengthof tool Power X axis (radius) Z axis

E236N-40 Ø0-Ø260mm (Ø0-Ø130mm radius) 0-360mm 24V 0.001mm 0.001mm


68

Tool Presetting Machine

eh

Tuscan E236N-40 Tool Presetter

Designed as a low cost entry level for tool presetting the E236N can increase the efficiency of your business by eliminating the timeconsuming task of measuring tools on your CNC Machine tool. Designed to be bench mounted the Presetter features a groundgranite base and column, stainless steel construction and ergonomic design to ensure to maximum rigidity and stability


69

ARFILTRAZIONI®

Based in Bergamo, Italy and with over 30 years of experience with oil and mist extractionsystems, AR Filtrazioni are at the forefront of research and development within the airpurification industry.Certified with Euro Norms EN1822 they are the only system on the market today with 5 stagesof filtration which helps them reach their current 99.97% filtration efficiency.Many companies are aware of the problems caused by oil mist and smoke for example, cleaningcost and possible health risks. There are also underlying problems with productivity asmachining processes are reduced to minimise mist production.Each series of AR Filtrazioni’s units are designed to address each of these issues and our toolingand workholding division will help you to find the unit that suits your specific requirements.

Oil and Mist Extraction Systems


Part No. Air flow rate Stages of filtration Power Weight

ECO 750 MC/h 2 0.37KW 33kg

ECO F 750 MC/h 3 0.37KW 37kg

ECO PF 500 MC/h 3 0.37KW 42kg

ECO TWO 1100 MC/h 3 0.55KW 38kg

ECO TWO F 1100 MC/h 4 0.55KW 40kg

ECO TWO PF 950 MC/h 4 0.55KW 50kg

ECO Series

Smaller but equally as efficient as the ARNO the ECO and ECO TWO series isdesigned for the purification of oil mist, micro dust and smoke producedduring damp and dry machining processes. With a washable metallic filter anda self cleaning recondenser the Eco series is a compact and efficient unit.

Stages of Filtration

X Pre filtration system for the pre‐filtration of largeamounts of liquid pollutants

1 Self cleaning centrifugal re‐condenser

2 Filtration by coalescence (fibre glass pocket filter)

3 Absolute filtration via HEPA filter H13 EN1822

Specifica�ons may vary due to make and model. The filtra�on units are designed and adapted to suit your specific requirements.For further informa�on please contact our tooling and workholding department.

1X

1X

22 22

3

• EfficientFiltration efficiency up to 99.97% for particles ≥0.15µm. Includes a

drainage system for the collection of recondensed coolant liquid

• Low MaintenanceEasy to maintain due to the hinged catches for easy inspection and

to clean the washable metallic filter

Visable gauge to monitor filter conditions

• VersatileSuitable for a variety of machining applications including Turning,

Milling, Grinding and EDM

ARFILTRAZIONI®


70


71


Part No. Air Flow Rate Stages ofFiltration Power Weight

ARNO 0VA 1250 MC/h 4 0.55KW 47kg

ARNO 1V/A 1700 MC/h 4 0.75KW 60kg

ARNO 2V/A 3300 MC/h 4 1.5KW 74kg

ARNO 3V/A 4000 MC/h 4 2.2KW 74kg

ARNO 0VF/A 1250 MC/h 5 0.55KW 57kg




ARNO Series

The ARNO range is designed for heavy duty applications working on single and multiple shifts. Equipped with a drainage system forthe recovery of re‐condensed coolant liquid the ARNO range is a robust and efficient air purification unit

Stages of Filtration

1 Self cleaning centrifugal re‐condenser

2 Pre‐filtration via washable metallic filter

3 Filtration by coalescence (fibre glass pocket filter)

4 Filtration and soundproofing via washable blackfiltering panel filter

5 Absolute filtration via HEPA H10 high gravity filter

The ARNO Series are the only systems on the market with 5 stages of filtra�on in accordance with Euro Norms EN1822

• EfficientFiltration efficiency up to 99.97% for particles ≥0.15µm

• Low MaintenanceReduced cleaning and maintenance cost due to the self

cleaning centrifugal recondenser and washable metallic

filter

Visable gauge to monitor filter conditions

• VersatileSuitable for a variety of machining applications including

Turning, Milling, Grinding and EDM

ARFILTRAZIONI®


Also available in the AR Filtrazioni range...

ARF - The perfect solution for laser or spark erosion machines.

ARFILTRAZIONI®

• Suitable for dry and damp machiningprocesses

• Pollutants ‐ Micro dust, smoke, fumesand odours

ARPX - For workshops where the machined materials are mixed and changed periodically

• Suitable for Machining Centres, Lathes,Grinding and Sharpening Machines,Boring Machines, Thread CuttingMachines

• Pollutants ‐ Dry dust, smoke, fumes andodours

ART - Specially suited for machining processes of graphite

• Suitable for Machining Centres, Lathes,Grinding and Sharpening Machines

• Pollutants ‐ Dry dust

Eco - Workdesks - To ensure the highest degree of cleanliness in the working environment

• Prevents contamination entering theworking environment during the blowingand snagging of working pieces

• Pollutants ‐ Oil mist, dust and micro dust


72


detron Based in a state of the art facility, Detron design and manufacture the new era of CNC rotarytables. With accuracy results that prove they are as good as, if not better than Japanese tables,Detron have proven their ability to provide innovative and quality products.Their pursuit to develop high quality and technologically advanced products is why they havebeen recognised by some of the biggest names in the machining industry.Continuous research and development of their range ensures the seamless integration betweenyour machine and table. Sincerity, practicality and perseverance are detrons company policies.Combine this with our fully stocked spares department and ability to fit, service and maintainyour table and you have the complete solution.

CNC Rotary Tables

73


74

GX-P Series

• Worm gear transmission

• Suitable for horizontal and vertical applications

• Pneumatic brake system

• Equipped with heavy duty precision cross roller bearings

• Transmitted by dual lead worm with increased teeth

depths for increased efficiency

CNC Rotary Tables

Unit GX-125P/PL GX-170P/PL GX-210P/PL GX-255P/PLWorktable diameter mm Ø125 Ø170 Ø210 Ø255Centre bore diameter mm Ø30H7 Ø40H7 Ø40H7 Ø40H7Through-hole diameter mm Ø25 Ø40 Ø40 Ø40Height of table (horizontal) mm 155 158 158 186Centre height of table (vertical) mm 110 135 160 160Width of T-slot mm 12H7 12H7 12H7 12H7Width of guide block mm 18 18 18 18Drive pressure / method Kg/cm2 5 / Pneumatic 5 / Pneumatic 5 / Pneumatic 5 / PneumaticClamping torque Kg.m 8 18 26 26

Servo motor type ⍺2iHF75T

⍺4iHF54T

⍺4iHF54T

⍺4iHF54T

Transmission ratio 1:90 1:90 1:90 1:90Max. table speed min-1 44.4 44.4 44.4 44.4Allowable loading inertia Kg.cm.s2 2 5.5 8.4 8.4Resolution deg. 0.001° 0.001° 0.001° 0.001°Indexing accuracy sec. 40” 20” 20” 20”Repeatability sec. 6” 6” 6” 6”Net weight (servo motor excluded) Kg 25 52 57 58Allowable loading capacity

KgKgKg

50100100

75150150

75150150

75150150

Kg 970 1400 1400 1400

Kg.m 41 102 102 102

Kg.m 8 18 26 26

Allowable wheel torque

Kg.m 8.5 17 25 25

FanucMitsubishi

VerticalHorizontalTailstock applied

Clamping torque

Note: 1. The length of servo guard may very with servo motor type. The sheet metal dimensions shown on right page are based on Fanuc motor.2. Allowable cutting torque at table speed of 1 min-1

detron

Specifications

74


GX-125P

CNC Rotary Tables

GX-170P

GX-210P

GX-255P

Note: Drawings based on the motor being mounted on the right hand side

detron

75


GV-SB Series

• Heavy duty precision cross roller bearings

• Super multiple pneumatic brake

• Transmitted by dual lead worm with increased teeth depths for

increased efficiency

CNC Rotary Tables

Specifications

Unit GV-170SB GV-210SB GV-255SBWorktable diameter mm Ø170 Ø210 Ø255Centre bore diameter mm Ø40H7 Ø40H7 Ø40H7Through-hole diameter mm Ø40 Ø40 Ø40Centre height of table (vertical) mm 135 160 160Width of T-slot mm 12H7 12H7 12H7Width of guide block mm 18H7 18H7 18H7Drive pressure / method Kg/cm2 5 / Pneumatic 5 / Pneumatic 5 / PneumaticClamping torque Kg.m 25 40 40

Servo motor type ⍺4iHF54T

⍺4iHF54T

⍺4iHF54T

Transmission ratio 1:90 1:90 1:90Max. table speed min-1 44.4 44.4 44.4Allowable loading inertia Kg.cm.s2 5.5 8.4 8.4Resolution deg. 0.001° 0.001° 0.001°Indexing accuracy sec. 20” 20” 20”Repeatability sec. 6” 6” 6”Net weight (servo motor excluded) Kg 90 104 150

Allowable loading capacity

KgKgKg

75-

150

75-

150

75-

150

Kg 1400 1400 1400

Kg.m 102 102 102

Kg.m 25 40 40

Allowable wheel torque

Kg.m 15 26 26

FanucMitsubishi

VerticalHorizontalTailstock applied

Clamping torque


detron

76


GV-170SB

CNC Rotary Tables

GV-210SB

GV-255SB

Note: Drawings based on the motor being mounted on the right hand side

detron

77


Unit GF-125P GF-170P GF-211P/PB

Worktable diameter mm 125 170 210

Centre bore diameter mm 30H7 40H7 40H7

Height of table (horizontal) mm 230 260 305

Centre height of table (vertical) mm 160 190 225

Width of T-slot mm 12H7 12H7 12H7

Width of guide block mm 14 18 18

Drive pressure / method Kg/cm2 5 / Pneumatic 5 / Pneumatic 5 / Pneumatic

Servo motor type

Rotary Tilt

⍺2i ⍺4i

HF75T HF54T

Rotary Tilt

⍺4i ⍺4i

HF54T HF54T

Rotary Tilt

⍺4i ⍺8i

HF54T HF104T

Transmission ratio 1:90 1:90 1:90 1:90 1:90 1:120

Max. table speed min-1 44.4 44.4 33.3 22.2 33.3 22.2

Allowable loading inertia

Kg

Kg

50

35

50

35

75

50

Resolution deg. 0.001° 0.001° 0.001°

Indexing accuracy sec. 40” 60” 20” 60” 20” 50”

Repeatability sec. 6” 8” 6” 8” 6” 8”

Tilting angle range deg. +40~-120 +30~-120 +30~-120

Net weight (without servo motor) Kg 100 170 300

Clamping torque Kg.m 8.5 18 18 26 26 30

Allowable wheel torque Kg.m 8 17 17

In horizontal

In Tilt (0-90°)

Fanuc

Mitsubishi

GF-P Series

• Transmitted by dual lead worm with increased

teeth depths for increased efficiency

• Equipped with heavy duty precision cross

roller bearings

CNC Rotary Tables

Specifications


detron

78


GF-125P

CNC Rotary Tables detron

GF-170P

GF-211P/PB

79


80

Manual Tailstocks

• With extractable Morse Taper centre

CNC Rotary Tables

Support Rotary Tailstocks

Model ST125 ST170 ST210 ST225

H 110mm 135mm 160mm 190mm

C 161mm 183mm 208mm 238mm

Weight (kg) 24 26 28 31

Part No.(mm)

A B C D E F G HØ

IØ

J K L M NØ

Weight(kg)

SR-125P 130 104 190 80 18 110 190 125 30 20 100 80 10 15 20

SR-170P 130 97 240 100 18 135 235 170 40 25 100 70 15 30 30

SR-210P 130 97 240 100 18 160 265 210 40 25 100 70 15 30 40

detron

• Standard tolerance is ±0.02mm

• Standard tolerance is ±0.02mm

AB

N

M LK

J

I HG

F

C

D DE


detron CNC Rotary Tables

Detron Features

Features of Drum Brake System

• Easily adjustable brake unit• Rotating centre does not offset during braking for

minimum positioning errors• Under high hydraulic pressure conditions there is no oil

leakage from the brake to ensure higher clamping torque

High Rigidity FC-30 Cast Iron body

Waterproof and robust design

Sealed with an O ring for the prevention ofcutting fluid or swarf entering the unit

Features of Worm shaft/Worm wheel

• Transmitted by specially designed duallead worm with increased teeth depthsand modules. Suitable for heavy cuttingapplications

• The bushing is fitted between the sleeveand needle. With this feature the boreof the sleeve is wear resistant resultingin higher indexing accuracy

Features of hardened andground braking surface

• Heat treated and ground the brakingsurface is high wear and scratchresistant it also ensures that greaterclamping forces can be applied

• The cylindricity and smooth surfacehelps minimise displacement of therotating centre and reduce positioning errors during braking

Features of integratedradial and axial bearings

• The rail surface is thicker thansome other tables. This ensuresthat the structural rigidity ishigh under heavy cutting

• Using less component partsdecreases the chance of errorand increases indexing accuracyand repeatability

Accuracy

Heidenhain Accom

• Determination of Accuracypositioning and repeatability1S0‐230‐2The test results of 1S0‐230‐2are based on 5 continuousrevolutions of clockwise andcounter clockwise directionalpaths

Features of Tables surface

• Precision ground• Higher accuracy when adjusting Jig on

centre hold• Large diameter allows mounting of

multi‐port oil distributor

81


82


Microloc

Designing products to increase produc�vity by increaseingmachine cycle �mes and reducing operator interven�on,Microloc design and manufacture premier clamping systemscapable of holding square, rectangular and circular workpieces

• High rigidity

• Increased produc�vity

• Kit or custom made systems

Hainbuch

Market leaders in the design and manufacture of accurate and rigidworkholding solu�ons. The Hainbuch range of Collet Chucks are a prac�caleconomic and versa�le collet chuck system

• High holding power, precision and rigidity

• Easy to change

• All Hainbuch collets are interchangeable with other Hainbuch products

As well as our main principles we are also able to provide some of the following products

System 3R

Known throughout the industry as being the pioneers inpallet and clamping systems System 3R offers a widerange of products to help increase the produc�vity ofyour business

• Speed

• Increased produc�vity

• Flexibility

• Repeatability down to microns

System 3R

HOW TO FIND US:

FROM THE EAST M3:Exit the M3 at J8 and take the A303westbound. Continue on the A303 pastPodimore Services and at the nextroundabout (Cartgate service area) turn leftonto the A3088 towards Yeovil.

FROM THE WEST M5:Exit the M5 at J25 (Taunton) and take theA358 signposted Ilminster. At the Ilminsterroundabout turn left onto the A303 towardsYeovil, at the next roundabout (Cartgateservice area) turn right onto the A3088towards Yeovil.

A3088 TO YEOVIL:At the Garador roundabout take the first exitat the next roundabout second exit and at the next roundabout first exit onto Lufton Way. Take the third left intoBoundary Way and at the T junction turn left, YMT is situated on your right -Tuscan House.

Tuscan House, George Smith Way, Lufton Trading Estate, Yeovil, Somerset BA22 8QRTel: 01935 428 375 Fax: 01935 432 684

[email protected] www.ymtltd.co.uk

Tooling and Workholding Catalogue TOO… · BT40-WF20 M6-M20 94 53 12.5 12.5 50 BT50-WF12 M3-M12...

Documents

Transcript of Tooling and Workholding Catalogue TOO… · BT40-WF20 M6-M20 94 53 12.5 12.5 50 BT50-WF12 M3-M12...