Tool - mcginns.com.au Oct-Dec.pdf · 2 Av 1 st t 31 st 2013 ... plier and wide, flat band hose...
Transcript of Tool - mcginns.com.au Oct-Dec.pdf · 2 Av 1 st t 31 st 2013 ... plier and wide, flat band hose...
Available 1St October - 31St December 2013
Wobble Extension Bar Sets•Extensions with unique male end enables the user to drive sockets
up to 15° from vertical
•Spring loaded ball bearing holds sockets securely
Part No. Description Length Qty Price ex. GST
Price inc. GST
301937 1/2” Sq. Dr 50, 125, 250, 500mm 4 $29.95 $32.95
301938 3/8” Sq. Dr 45, 75, 150, 250, 450mm 5 $31.82 $35.00
Protractor
Soldering Irons•Good thermal conductivity – High insulation, ceramic, rugged long life
heating element for rapid heat-up and instant recovery•Long life tip for extended life•Stainless steel components provide corrosion resistance and extended life•Stay cool handle provides user comfort even after long periods of use
• Ideal for soldering steel, copper, brass, nickel and tin
•Recommended use: Printed circuit board, radio controls, light electrical, small electric and/or electronic parts
•Supplied with detailed user guide and handy tips manual
$22.50Ex. GST $20.45 Inc.GST
Part No. 301955
Part No. Description Price Ex. GST
PriceInc. GST
302101 240V-40W $18.64 $20.50
302103 240V-80W $23.59 $25.95
302104 240V-100W $25.49 $27.95
•Conforms to the shape of the vehicle and protects the car during service and maintenance
•Remains in place by clinging magnetically to the vehicle• Inside is made from soft, non-scratching PVC sponge leather•Outside is made from strong and durable non-scratching vinyl•Size 800 x 600mm
$99.00Ex. GST $90.00 Inc.GST
Part No. RCFT6
Magnetic Guard Cover
Chisel Set - Foam Tray
Desoldering Pump Solder Sucker•Used for the safe & easy removal of molten
solder during soldering repair work•Commonly referred to as a “Solder Sucker”
•Premium quality hardened chrome vanadium steel
•Forged, quenched and tempered as a whole
•Contains flat cold chisels 100,150, 200, 250, 300mm and slitting chisel 240mm
•Long service life
•Quality foam tray for storage
•Made in Germany
•Metric, single sided, stainless steel
•Photographically etched markings
•Made in Japan
180o with 100mm rule
Premiumquality.Extensiverange.We’vegotitcovered.
ToolTool SpecialSocTober-december 2013
HOTPRICE
NEW
NEW
$29.95Inc.GST
Part No. 301941Ex. GST $27.23 $6.95
Ex. GST $6.32 Inc.GST
Part No. 302121
Tool SpecialS
2 Available 1st October - 31st December 2013 www.tridon.com.au
•Contains four knipex 1000V insulated pliers, in a high quality foam tray•An ideal pack for all general electrical applications• Ideal for work benches and trolleys•Made in Germany
Insulated Plier Set
$209.50Ex. GST $190.45 Inc.GST
Part No. 002001V14
Stainless Steel Rules•Highest Precision, hardened stainless steel•Accurate to JIS B 7516 - Grade one specifications. Satin chromed for rapid reading
•Markings photographically etched. Each rule supplied in protective pouch
•Made in Japan
Part No. Description Length Width Price Ex. GST
Price Inc. GST
150BM Metric Single Sided 150mm 15mm $5.00 $5.50
300M Metric Single Sided 300mm 25mm $9.95 $10.95
600M Metric Single Sided 600mm 30mm $22.73 $25.00
300MESE Metric & English Double sided 12inch 28mm $11.36 $12.50
•Complete with bearing separator, main rods, extension rods, twin/triple head, beam and legs to build 4”, 6”, 8” two and three leg hydraulic pullers.
• Ideally suited to industrial, automotive, agricultural and marine applications and for general maintenance.
•Spread: 180mm, Reach: 425mm•Separator capacity 75-105mm•10 tonne hydraulic ram
Hydraulic Bearing Puller Set
•Suitable for all types of wire•High cutting performance•Chrome vanadium, electric steel,
oil hardened and tempered•Length 180mm•Made in Germany
High Leverage Diagonal Cutters
$39.95Ex. GST $36.32 Inc.GST
Part No. 7401180B
$295.00Ex. GST $268.18 Inc.GST
Part No. 265000
Parts Cleaning Brush• Handy size, strong and durable• Compatible with general cleaning solvents• Ideal for cleaning engine and transmission spares, brake parts and bearings• 260mm x 25mm
$4.95Ex. GST $4.50 Inc.GST
Part No. 301004
Scraper & Hook Set 5 Piece•Suitable for automotive, industrial and hardware applications• Ideal for scraping, scribing, marking, picking and seal removal•Manufactured from heat treated alloy steel •Comfort grip handles•5 piece set
$27.95Ex. GST $25.41 Inc.GST
Part No. 301008
Pocket Telescopic Mirror
$12.50Ex. GST $11.36 Inc.GST
Part No. 301011
Brake Line Crimping Plier Set
$32.50Ex. GST $29.55 Inc.GST
Part No. 301025A
•Stainless steel probe with comfort grip handle
• Ideal for scribing, marking, picking and oil seal removal
Pick & Hook Set
$12.50Ex. GST $11.36 Inc.GST
Part No. 301043
Alligator Water Pump Pliers•Box-joint design: high stability because of double guide•Self-locking on pipes and nuts: no slipping on the workpiece; low
handforce required•Guard prevents operators’ fingers being pinched•Favourable lever action: optimum transmission of force•Gripping surfaces with special hardened teeth, teeth hardness approx.
61 HRC: low wear and secure gripping• Chrome Vanadium electric steel, oil-hardened and tempered•Made in Germany
Part No. Reach Price Ex. GST
Price Inc. GST
8801180 180mm $38.64 $42.50
8801250 250mm $40.45 $44.50
8801300 300mm $54.09 $59.50
8801400 400mm $105.00 $115.50
•Designed to shut off (restrict) flow of fluid or vacuum, ideal for automotive applications including vacuum, fuel, brake and heater hoses
•Ring lock to hold the plier in the selected position•For applications requiring numerous pliers at once
e.g. one man brake bleeding work•4 piece set
FREE COMBINATION PLIER
•Features pocket clip & swivel joint
Mirror Dimension Telescopic Range Handle
25 x 50mm 200–520mm Steel
*Uncarded
NEW
400mmXL SIZE
SELLERTOP
Premiumquality.Extensiverange.We’vegotitcovered.
3Available 1st October - 31st December 2013 www.tridon.com.au
$23.50Ex. GST $21.36 Inc.GST
Part No. 016510
Tube Cutter 3-30mm•Hardened SK2 alloy steel cutting wheel•Well designed, durable tool•Suitable for plastic, brass, copper, aluminium and mild
steel tubing between 3-30mm (1/8”–11/8”))
$14.95Ex. GST $13.59 Inc.GST
Part No. 301033
Mini Tube Cutter 3-15mm•Hardened SK2 alloy steel cutting wheel•Well designed, durable tool•Suitable for plastic, brass, copper, aluminium
and mild steel tubing between 3-15mm (1/8”-9/16”O.D.)
$9.95Ex. GST $9.05 Inc.GST
Part No. 301032
•Removes windscreen wiper arms from both tapered and spline spigots
•Compact tool allows easy access in confined spaces•Eliminates damage to surrounding paintwork•16mm shank, working height 26mm
•24mm ½” Square drive•Deep cavity design specifically for the
removal of oil pressure switches•Popular size
Wiper Arm Removal ToolOil Pressure Switch
Socket 24mm
$17.50Ex. GST $15.91 Inc.GST
Part No. 301071
•4 Piece - 200, 300, 450 and 600mm bars•Alloy steel for strength and durability•Suitable for maintenance on engine mountings, cylinder heads and manifolds,
exhaust systems, brake parts, shock absorbers, steering linkage, door locks, body panels etc
Pry Bar Set
$26.95Ex. GST $24.50 Inc.GST
Part No. 301083
Grinding Wheel Dresser•Designed for dressing, truing, sharpening and
removing glaze from solid abrasive wheels•Manufactured with high speed steel cutter
roll and plastic handle•Length: 125mm•Cutter size: 32mm (dia.) x 20mm(w)
$9.50Ex. GST $8.64 Inc.GST
Part No. 301109
V-Belt Installer and Remover • Remove and replace V-belts with ease•To remove, simply place the tool
between the belt and pulley
•May be used with a remote starter to avoid finger contact
$11.50Ex. GST $10.45 Inc.GST
Part No. 301111
•Manufactured from heat treated, chrome vanadium steel•Convenient folding style. Fits easily in your pocket• Includes T9, T10, T15, T20, T25, T27, T30 & T40
• Trade quality tool
Tamper Proof Torx Tool
$13.50Ex. GST $12.27 Inc.GST
Part No. 301119
Aviation Tin Snip Straight Cut•Manufactured with drop forged, chrome moly steel
•Cuts up to 18 gauge, cold rolled sheet steel
•Double serrated blades
•Length: 250mm
$14.95Ex. GST $13.59 Inc.GST
Part No. 301121
•Suitable for opening a wide range of vehicles
•Consult motor vehicles workshop manual prior to use
Universal Lockout Tool Kit
$39.95Ex. GST $36.32 Inc.GST
Part No. 301161
•Non slip rubber mat prevents tools from moving in drawers of tool boxes and chests
•1950mm x 600mm
Tool Box Rubber Mat
$17.95Ex. GST $16.32 Inc.GST
Part No. 301169Sanding Block •Sanding block with spring loaded clips which hold paper firmly
in place and also allow for quick paper installation and removal •Manufactured from ABS plastic making it light weight and also
extra strong
•Pad size: 106 x 212mm
$13.50Ex. GST $12.27 Inc.GST
Part No. 301165
•Set includes cross slotted jaw plier and wide, flat band hose clamp jaw plier to service most hose clamps in ring type or flat band type
•Both pliers feature ratchet lock mechanism that hold the clamp in an open position for easy installation and removal
•For use with CTC style clamps
Universal Hose Clamp Plier Set 2 Piece
For u
se w
ith CTC Style Clamps
$32.50Ex. GST $29.55 Inc.GST
Part No. 301171
WHILE STOCKS
LAST!
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
Tamper Proof Torx (6-Point star)
SIZEMULTI
Tool SpecialS
4 Available 1st October - 31st December 2013 www.tridon.com.au
Ratchet Podgers• Made from high quality drop-forged chrome vanadium steel•Combination double socket - two sizes in one• In-built ratchet reverse direction lever• Tapered end designed to align bolt holes easily• Specially designed for heavy duty/industrial use where extra leverage
and size is required in confined spaces•*Scaffolders - cranked style
Part No. Size Length PriceEx. GST
PriceInc. GST
301228 18 x 24mm 315mm $37.73 $41.50
301230 19 x 24mm 315mm $37.73 $41.50
301235 24 x 27mm 360mm $47.73 $52.50
301234 24 x 30mm 450mm $50.00 $55.00
301236 27 x 32mm 450mm $56.82 $62.50
301239 36 x 41mm 450mm $63.18 $69.50
301243* 21 x 24mm 240mm $37.73 $41.50
In-b
uilt
ratch
et reverse direction leverCombination Inspection & Pick-Up Kit• Includes one unit with four interchangeable heads including three different
pick-up tools (capacities 0.5, 2.2 and 3.6 Kgs) and one circle inspection mirror •Pick-up tool heads include two standard and one ball joint styles•Kit also includes one complete rectangle mirror inspection tool •Supplied in custom moulded reusable foam storage tray
$25.95Ex. GST $23.59 Inc.GST
Part No. 301336
Torque Wrench 3/4 “ Dr
•Slim head, reversible, click-stop type •Heavy duty cam• Locking handle mechanism• Ideal for automatic transmission service• Dual scale 50-300ft/lbs 68-400Nm
$129.95Ex. GST $118.14 Inc.GST
Part No. 301349
•Useful storage tray, attach to all metal surfaces
•240mm x 140mm x 30mm deep
•Two strong 80mm built-in magnets
Magnetic Stainless Steel Tray
$19.95Ex. GST $18.14 Inc.GST
Part No. 301398
Valve Spring Compressor KitOn Car Adjustable Lever Cam
$109.95Ex. GST $99.95 Inc.GST
Part No. 301486
Impact Socket Set Double Hex & E-Star 3/4” Sq. Dr.
$100.00Ex. GST $90.91 Inc.GST
Part No. 301487
Axle Spindle Re-Thread Set
$62.50Ex. GST $56.82 Inc.GST
Part No. 301518
Crowfoot Wrench Set (Flared)
$37.50Ex. GST $34.09 Inc.GST
Part No. 301574
E- Star Socket Set 9 Piece•Sockets for use on E-Star fasteners used in modern automotive
applications, popular in European vehicle makes
•Manufactured from drop forged vanadium steel for maximum strength and longevity
•3/8” Sq. Dr. size: E10, E11, E12, E14, E16, E18, E20
•1/4” Sq. Dr. size: E6, E7, E8
$22.50Ex. GST $20.45 Inc.GST
Part No. 301666
Air Blow Gun• Comfort grip nylon body with
steel angle nozzle
•Brass 1/4” female NPT thread
Part No. Nozzle Length Pressure PriceEx. GST
PriceInc. GST
301679 100mm 520-830 kPa (75-120 PSI) $9.05 $9.95
301680 330mm 520-830 kPa (75-120 PSI) $12.50 $13.75
•Flared type•3/8” Square Drive•Size range: 10–19mm•10 piece set supplied on a convenient socket rail
Metric 10 Piece
• Impact sockets for use with power or air operated tools on Double Hex 12-Point(17,18mm) and E-Star fasteners (E18, E20, E24)
•3/4” square drive •Manufactured from drop forged vanadium steel for maximum
strength and longevity•Overall length: 90mm•5 piece set supplied in blow mould storage case
•For re-thread and repair of axle threads on spindles of eight popular die sizes
•Dies are made of high tempered steel for strength and durability
•Twist shape makes repair easier•SIzes 20x1.25, 22x1, 24x2, 20x1.5, 24x1,
24x1.5 (Metric) 3/4x20, 13/16x20 (UNEF)
BRASSTHREAD
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
•Removes and replaces valve springs and valve stem oil seals without cylinder head removal
•Applications include: GM (Opel), BMW, Seat, Volkswagen, Audi, Hyundai, Toyota, Ford 16V, Renault 19 and Clio
• Includes collet sizes: 19–24mm, 19.2–25.5mm, 19.2–26mm, 27.5–33.5mm and one universal adaptor
Premiumquality.Extensiverange.We’vegotitcovered.
5Available 1st October - 31st December 2013 www.tridon.com.au
Heavy Duty Circlip Plier Set 18 Piece•For the safe and easy removal of circlips•Contains one internal and one external circlip plier•Spread of pliers to 75mm
$85.00Ex. GST $77.27 Inc.GST
Part No. 301800
Professional Breaker Bar Heavy Duty•3/4” Square Drive
•180o rotating head for increased versatility•Heat treated drop forged chrome vanadium steel•Corrosion resistant mirror-chrome finish
•Packaged on plastic hanger card
Part No. Description Price inc. GST
Price ex. GST
301822 1000mm (39”) $65.91 $72.50
180O ROTATING HEAD
Torx & E-Star Socket Set 1/2” Sq. Dr.
•Sockets for use on Torx and E-Star fasteners used in modern automotive applications, popular in European vehicles
•Manufactured from drop forged vanadium steel for maximum strength and longevity
•1/2” square drive•Size range: T20–T70 and E10–E24 •19 piece set supplied in blow mould storage case
$55.95Ex. GST $50.86 Inc.GST
Part No. 301845
Ratchet Wrench Sets
Part No. Description Size PriceEx. GST
PriceInc. GST
301893 Metric 12 Piece 8-19mm $118.14 $129.95
301892 SAE 13 Piece 1/4” - 1” $136.32 $149.95
301895 SAE 13 Piece - Flexhead 1/4” - 1” $250.00 $275.00
Professional Bit Set•Bits are made from hardened and tempered alloy steel
•Professional quality set supplied in a handy metal tool box
• Includes: Ribe, Hex, Torx and Spline bits
$42.50Ex. GST $38.64 Inc.GST
Part No. 301934
•Metric, double sided•Stainless Steel
•Photographically etched markings
•Made in Japan
Part No. Size Price ex. GST
Price inc. GST
301958 100 x 50mm $11.36 $12.50
301959 150 x 75mm $14.09 $15.50
Mini Squares
Combination Pliers•Heavy duty, strong and durable Chrome Molybdenum•Cuts precisely and grips firmly•Gripping zones for flat and round material•Suitable for cutting soft and hard wire up to 3mm in diameter•Black phosphate finish protects against corrosion
Part No. Length Max Jaw Open Ex. GST PRICE
301990 180mm 40mm $15.41 $16.95
301992 230mm 40mm $19.95 $21.95
Diagonal Cutters•Made from Chrome Molybdenum•Heavy duty cutter for powerful, efficient and precise cutting•Hardened cutting edges cut hard wire up to 3mm diameter•Black phosphate finish protects against corrosion•Length 200mm
Part No. Length Max Jaw Open Price Ex. GST
Price inc. GST
301993 160mm 22mm $14.50 $15.95
301995 200mm 20mm $20.86 $22.95
Pocket MagneticPick-Up Tooll Stainless telescopic shaft with pocket clipl Extends from 170mm to 760mml Holds weights up to 0.7kg
Extends 760mm
$14.50Ex. GST $13.18 Inc.GST
Part No. 301298
Long Nose Pliers 45º Tip
•For cutting, gripping and manipulating all types of components and wires
•Excellent control and reach in confined spaces
•Suitable for most soft and hard wire up to 3mm in diameter
•Length 210mm
$29.95Ex. GST $19.05 Inc.GST
Part No. 301997
HOTPRICE
HOTPRICEHOT
PRICE
Multi Grip Pliers•Made from Chrome Molybdenum•Seven position box joint allows adjustable jaw widths•Deep, hardened teeth grip firmly and do not slip
•Black phosphate finish protects against corrosion
Part No. Length Max Jaw Open Price Ex. GST Price Inc. GST
301998 250mm 35mm $20.86 $22.95
301999 300mm 40mm $25.41 $27.95
301998
301999
•Available in Standard and Flexible Head
•SAE or Metric ring and open end
•72 teeth ratchet
• Polished tempered forged alloy steel
•Supplied on a convenient rack organiser, designed for wall mounting or tool box storage
301895 Flexible Head
HOTPRICE
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
6 Point Bit(Torx)
12 Point Bit
12 Point Bit
12 Point Socket
Slotted
Pozidriv
Philips
12 Point Socket
6 pt Tamper proof
E Star Socket
(Spline Bits)
(Double Hex)
Ribe Bits
Ribe Socket
Hex Socket
Sq Socket
Hex Bit(L-key)
Tool SpecialS
6 Available 1st October - 31st December 2013 www.tridon.com.au
Circuit TesterMulti Purpose Connector Set
$275.00Ex. GST $250.00 Inc.GST
Part No. 302000
•Guides tester probe into the centre of vehicle electrical wires•Eliminates stabbing of fingers when piercing wires•Holds the circuit tester in position enabling both hands to be
free to work on the electrical system•Resistant to oil, fuel and thinners
Wire Piercing Guide
$9.50Ex. GST $8.64 Inc.GST
Part No. 302003
Alternator Bit Set• Comprehensive set designed for alternator service work• Includes Torx, Spline and Hex Bits•Applications include: Alfa Romeo, Audi, BMW, Citroen, Fiat, GM,
Mercedes Benz, Mitsubishi, Renault, Seat, Skoda, Volvo
•A multi-purpose automotive testing kit designed for use on all makes of multimeters and test equipment
•Comprehensive set tests, isolates and evaluates automotive electrical circuits
•Set includes numerous direct fit terminal connectors, additional probes, alligator clips, potentiometer, LED indicators and SRS connectors
•Various male/female connection terminals
•Enables easy electrical diagnosis using the correct connector for the wide range of electrical terminals used on modern vehicles
•Suits most European, Japanese and American terminals
$55.50Ex. GST $50.45 Inc.GST
Part No. 302005 Crimper, Cutter & Stripper•Handy 3 in 1 tool for crimping, cutting and stripping applications•Suitable for cutting insulated wires (including spark plug wires)•Crimps insulated, non-insulated terminals and 90° distributor crimp work• Ideal for auto ignition wire stripping and crimping work•Wire Stripper/Pre-Crimp/Final Crimp size: 7–8 (mm)•Manufactured from quality alloy steel with black oxide
finish for increased service life•PVC moulded handles•Overall length: 210mm $17.50
Ex. GST $15.91 Inc.GST
Part No. 302019
Crimping Plier Ratcheting•Heavy duty ratcheting crimp tool for fast, efficient
and easy crimp work•Designed to achieve correct compression and superior
electrical connection•Durable, ergonomic plastic handles for maximum
performance and comfort •Manufactured from quality alloy steel with black
oxide finish for increased service life•Crimps 0.5-6.0 (mm2) / 22-10 (AWG)
$29.95Ex. GST $27.23 Inc.GST
Part No. 302021
Car Light Tester•Sharp circuit connection tip with brass cap•Brass casing body•Checks function of car lights fast and easily
$7.50Ex. GST $6.81 Inc.GST
Part No. 302148
Inline HT Spark Plug Tester Set•Designed to connect on to spark plug and ignition (HT) lead
•Manufactured from transparent plastic material that illuminates indicating ignition spark operation
•Enables quick and easy ignition spark testing and problem diagnosis•4 piece set
$14.50Ex. GST $13.18 Inc.GST
Part No. 302158Glow Plug ConnectorPliers 90°•For removal of stubborn, hard to reach Glow-Plug connectors•Suits most late model vehicles
$29.95Ex. GST $27.23 Inc.GST
Part No. 304038
•Removes and replaces oil filters located in difficult access positions
• 3/8” or 1/2” sq dr
•Suits oil filters 60-125mm diameter
Oil Filter Remover 3 Jaw
$21.50Ex. GST $19.55 Inc.GST
Part No. 305021
Oil Filter Removal Plier•Specialty pliers used for removing seized
and stubborn filters•Features slip jointed adjustable jaws with
“shark tooth” security grip to prevent slippage•Manufactured from chrome vanadium steel for
superior strength and durability•PVC dipped handles•Suits 85-115mm filters, Overall length 260mm
$14.95Ex. GST $13.59 Inc.GST
Part No. 305074
Heavy Duty Grease Guns• Heavy duty grease gun designed for continuous and demanding applications
•Textured powder coated finish for non-slip grip
Part No Description Cartridge Capacity
Bulk Capacity
PriceEx. GST
PriceInc. GST
305219Lever style with 150mm (6”) Steel Extension, 300mm (12”) Flexible Hose & 4 Jaw Coupler
450g 650cm3 $38.64 $42.50
305221Pistol style with 100mm (4”) Steel Extension, 300mm (12”) Flexible Hose & 4 Jaw Coupler
450g 650cm3 $43.18 $47.50
305221
305219SELLERSBEST
Premiumquality.Extensiverange.We’vegotitcovered.
7Available 1st October - 31st December 2013 www.tridon.com.au
Stainless Steel Grease Nipple Set Metric•Made from 303 stainless steel with stainless steel ball• Manufactured to QS9000 quality standards
$149.95Ex. GST $136.32 Inc.GST
Part No. 305378
$39.95Ex. GST $36.32 Inc.GST
Part No. 307005
Fuel Line Connector Pliers
•Required for most in-line fuel filter replacements
•Suits petrol engines: GM (Opel), Mercedes Benz (M-Class), VAG
Air Cond. Compressor Clutch Remover Kit•Removes and replaces air conditioning compressor clutch hubs•Kit contains disc type and nut type removers•Suitable for popular compressor models including: FS6, C171, 6P
and 148GM R4 & A6, HR-6, DA-6 & V5 Sanden SD505, 507, 508, 510, 575, 708 & 709
$72.50Ex. GST $65.91 Inc.GST
Part No. 308400
Tyre Levers•Professional quality tyre levers manufactured from hardened
and tempered drop forged chrome vanadium steel•For removal and installation of tyres on to rims
Part No. Length PriceEx. GST
PriceInc. GST
309034 500mm $22.27 $24.50
309035 600mm $26.82 $29.50Wheel Nut Socket Sets•Toledo deep impact sockets are specifically designed for strength and versatility •Removable protective plastic outer shell protects against damage to alloy wheels•Thin wall and deep hollow construction purposely designed to suit standard, alloy
and performance wheels•1/2” square drive for use with impact wrench•Colour coded for quick reference to size•Size: 15,17,19,(3/4”),21,22mm
$52.50Ex. GST $47.73 Inc.GST
Part No. 309036
Medium Tail Pipe Extender•Strong and durable unit covering exhaust pipes 38 - 64mm•Re-shapes damaged or warped exhaust tubing
•Suitable for use with spanner or adjustable wrench $29.95Ex. GST $27.23 Inc.GST
Part No. 312289
•Comfort-grip large aluminium handle, attached to a steel flex cable and a sharp edged cutting blade
•The handle and flex direct the cutting blade through the windscreen’s rubber surround, enabling swift removal of the screen
Windscreen Remover 3 in 1
$21.50Ex. GST $19.55 Inc.GST
Part No. 313309
C-Hook Wrenches•Adjustable ‘C’ wrench with pivot jaw for use on castleated nuts•Drop forged steel
Part No. Capacity PriceEx. GST
PriceInc. GST
315155 32-76mm $38.64 $42.50
315156 51-121mm $45.41 $49.95
315157 112-158mm $61.36 $67.50
‘HandiTorq’ Torque Wrench•Professional quality torque wrench with reversible QR ratchet•Simple adjustment and locking mechanism•Micrometer scale adjustment with spring loaded locking ring•Supplied in a storage case with calibration certificate
Part No. Length Range Sq. Dr.
810100 435mm 20-100Nm 16.6-71.9 lbf.ft. 3/8”
$125.00Ex. GST $113.64 Inc.GST
Part No. 810100
Adjustable Wrenches•Metric graduation markings on jaw•Non-protruding jaw shank to allow access in tight spaces•Parallel jaws ensure superior grip of bolts and fasteners•Features a four thread knurl offering smooth, uninhibited
opening and closing of jaws•Manufactured from drop forged chrome vanadium steel with
nickel and chrome plating
Part No. LengthJaw Opening
(Max.)Jaw
WidthWeight
PriceEx. GST
PriceInc. GST
88100 100mm (4”) 14mm 5mm 50g $11.77 $12.95
88150 150mm (6”) 22mm 6mm 110g $12.68 $13.95
88200 200mm (8”) 29mm 9mm 240g $13.59 $14.95
88250 250mm (10”) 33mm 9mm 400g $18.14 $19.95
88375 375mm (15”) 46mm 11mm 1150g $45.41 $49.95
88450 450mm (18”) 59mm 14mm 1800g $109.05 $119.95
88600 600mm (24”) 72mm 12mm 3100g $199.95 $219.95
Brake Bleeder Pump Kit Vacuum•Multi-purpose kit designed to test and service a number of
automotive system functions including one-man brake bleeding, vacuum testing and pressure testing fuel systems
•Suitable for passenger vehicles and light commercials where testing for vacuum or fluid sealing is required
• Includes instruction manual to assist in servicing and diagnosis
WHILE STOCKS
LAST!
$142.45Ex. GST $129.50 Inc.GST
Part No. 310012
Tool SpecialS
8 Available 1st October - 31st December 2013 www.tridon.com.au
Bearing Packer•Grease stays in the tool cavity, not on your hands•To pack a bearing, place the bearing on the piston, press
down on the cap until the old grease is forced out and the new grease shows on top of the bearing
•Suits bearings up to 89mm $34.75Ex. GST $31.59 Inc.GST
Part No. BS4326
Heat Shrink Tube Set 171 piece•Protects and insulates components and wires•Adhesive lined inner wall seals and protects against moisture
preventing corrosion•Quick & simple to shrink with a heat gun
$15.95Ex. GST $14.50 Inc.GST
Part No. BS1030
$12.95Ex. GST $11.77 Inc.GST
Part No. BS1034
Flexible Spout Funnel• Aluminium spout funnel for
fluid and oil transfer•Flexible shaft (600mm)
$27.95Ex. GST $25.41 Inc.GST
Part No. BS2551
• Injects lubricant into cable housing•Clamps over housing and wire allowing an aerosol can
lubricant to be connected•Once lubricant runs out the far end, the cable is lubricated•Designed to lubricate throttle and
clutch cables
Cable Wire Lubrication Tool
$10.95Ex. GST $9.95 Inc.GST
Part No. BS4531
Digital Torque Wrenches•Available in 1/4", 3/8", 1/2" Sq. Dr. • LED displays in Nm, ft.Lbs, in.Lbs, kgm, kg-cm•Click sounds as torque achieved• Battery operated use CR 2032 (3volt)•Oil resistant impact resistant casing•72 teeth ratchet• Automatic power off after 2 minutes• Calibration certificate supplied
Portable Work Stool Heavy Duty• Ideal for motorcycle work•Rotating wheels carry loads
up to 150kg•Durable plastic tray carries and
stores tools, parts etc•Quick and stable movement
•Easy to assemble
$39.95Ex. GST $36.32 Inc.GST
Part No. BS6100
Wire Retaining Tool• The stainless steel rope is 450mm in length which allows cables and lines
to be pulled through confined spaces• Fast and efficient way to remove cables and wires during replacement• The net diameter is 20mm• Firmly holds cables, wires and fasteners during removal and replacement
•Heat treated, induction hardened cutting edge for cutting copper wire and diobe leads flush with surface
•Not suitable for live line working•Length 130mm
Mini Electronic Plier
$12.50Ex. GST $11.36 Inc.GST
Part No. EBN130
•Long style with ball points for speed and ease of entry
Part No. Size Description Price Ex. GST
Price Inc. GST
HKM 2.5,3,4,5,6,8,10mm 7 Piece Metric $11.59 $14.95
HKAF 3/32”,1/8”,5/32”,3/16”,1/4”,5/16”,3/8” 7 Piece AF $11.59 $14.95
Hex Key Set 7 Piece
Part No. Description Price ex. GST
Price inc. GST
BS5422 3/8” Sq. Dr. (20-100Nm) $145.41 $159.95
BS5423 1/2” Sq. Dr. (40-200Nm) $163.59 $179.95
Part No. Length Width Pk Qty
Price Ex. GST
Price Inc. GST
CT103BKCD 100mm 3mm 100 $1.77 $1.95
CT154BKCD 150mm 4mm 100 $2.68 $2.95
CT205BKCD 200mm 5mm 100 $3.59 $3.95
CT305BKCD 300mm 5mm 100 $6.32 $6.95
CT408BKCD 400mm 8mm 25 $5.41 $5.95
Cable Tie Retail Packs
•Black cable ties U.V stabilised to resist material breakdown and increase life
•Manufactured from virgin nylon 6/6
•Designed for use on plaster board & gyprock
•Constructed of lightweight yet durable aluminium
•Box of 200•Flange dia: 6mm•Flange length: 30mm•Drill hole dia: 6.5mm•Wall thickness: 6.5mm
•Removes anchor bolts with faster with easy operation.
•235mm Length
Anchor Bolts
Anchor Bolt Plier
$62.50Ex. GST $56.82 Inc.GST
Part No. TWB01
$57.50Ex. GST $ 52.27 Inc.GST
Part No. HITAB100
Caulking Gun•Dispenses sealant, silicone and
tube cartridges•Suits standard size cartridges
$9.95Ex. GST $9.05 Inc.GST
Part No. 301655
HOTPRICE
Premiumquality.Extensiverange.We’vegotitcovered.
9Available 1st October - 31st December 2013 www.tridon.com.au
•This 15 piece set equals a 42 piece conventional set •Metrinch sockets remove metric & inch size bolts & nuts in the one tool •Removes rounded bolts & nuts•Sizes: 11-25mm/ 7/16”-1”
$99.50Ex. GST $90.45 Inc.GST
Part No. MET-2400
Deep Wall Impact Socket Set 1/2” Drive•This 15 piece set equals a 42 piece conventional set•Metrinch sockets remove metric & inch size bolts & nuts in the one tool •Removes rounded bolts & nuts•Sizes: 11-25mm/ 7/16”-1”
Carpenter’s Mitre Squares•Used for producing right angles in carpentry•Stainless steel blade with reinforced plastic handle•Graduated blade with metric and SAE markings•Features hanger hole in blade•Suitable for use as inner or outside try square, mitre square,
horizontal, 45° marking gauge and rule •Manufactured from stainless steel•Made in Japan
Part No. Length Width ThicknessPrice
Ex. GSTPrice
Inc. GST
MS150 150mm / 6 inch 16ths of one inch 1mm $20.45 $22.50
MS200 200mm / 8 inch 16ths of one inch 1mm $22.27 $24.50
$129.50Ex. GST $117.73 Inc.GST
Part No. MET-2450
Locking Grip Pliers
Part No. Length Price Ex. GST
Price Inc. GST
VG180 180mm $8.14 $8.95
VG250 250mm $9.05 $9.95
•Made from Chrome Molybdenum with Nickel plating
•Adjusting screw and self locking with release lever
Sheet Metal Lock Grip Pliers
Part No. Length Jaw Width
Jaw Opening
Price Inc.GST
Price Ex. GST
301979 200mm 75mm 0-45mm $12.68 $13.95
301980 250mm 100mm 0-55mm $13.59 $14.95
•Prevents damage to wheels and decorative wheel nuts
•Professional quality 1/2” Sq. Dr. deep impact sockets
•Thin wall deep hollow design suits performance alloys
•Removable plastic insert for longer nuts•Extra long (150mm)
•Sizes: 17, 19, 21 (mm)
Long Lug Nut Socket Set 3 Piece
$67.50Ex. GST $61.36 Inc.GST
Part No. 309032
• For efficient damage free removal of airbags on most late model BMW, Volkswagen, Audi, Renault, Mercedes, GM (Opel)
•Contains specialty air bag tools as well as Torx, Tamper Proof Torx & Hex bits
Air Bag Removal Kit
$72.50Ex. GST $65.91 Inc.GST
Part No. 313026
Copper Drain Plug/Sealing Rings, Assorted 450 Piece•Copper washers and sealing rings in popular sizes•Packed in a transparent sturdy-hinged acrylic case• Internal diameters: 7-7.5mm•External diameters: 13.85-2mm•Thickness: 0.9-3.0mm
$239.00Ex. GST $217.27 Inc.GST
Part No. 305075
Sliding Beam Puller Kit Mechanical
•Twin and triple leg option sliding beam puller kits•Legs slide across the beam to produce varying spread sizes to
suit various applications•Reversible legs suitable for internal and external applications•Thin jaw design, particularly useful in applications
with limited space•Spread: 35 -110mm•Reach: 210mm
$175.00Ex. GST $159.09 Inc.GST
Part No. 221008
Spanner Rack Organiser•Versatile spanner organiser manufactured
from high impact plastic for superior strength and durability
•Designed to neatly store open end, ring or combination spanners
•Storage quantity 12 piece
$7.95Ex. GST $7.23 Inc.GST
Part No. 301167
Standard Impact Socket Set1/2” Drive
JAWTHIN
•Serrated curved jaws provide effective grip on objects of all shapes•Drop forged alloy steel
Tool SpecialS
10 Available 1st October - 31st December 2013 www.tridon.com.au
•Extension merchandiser for CMHS250 including EFI clamps•Modular units can be configured to suit individual requirements•Dimensions: 600mm (w) x 350mm (h) x 160mm (d)•Made in Australia
Perforated Band ExtensionPart Stainless, EFI Clamps
$225.00Ex. GST $204.55 Inc.GST
Part No. CMHS210
Part No. Qty Part No. QtyMH005 30 HS036 15EFI004 30 HS040 15EFI005 30 HS044 15EFI006 30 HS048 15HS008 30 Total 210
Waste Oil Drain Gravity Fed•Oil drain with wheel mounted tank for gravity draining of motor, engine,
gearbox and differential oils, transmission and power steering fluids etc. from all types of motor vehicles placed on auto lift or a pit
•Centrally mounted 10 litre (10.50 quart) capacity bowl is height adjustable and can be optimally positioned allowing oil draining as well as other maintenance operations
•Bowl comes fitted with anti splash screen•Durable all steel design and reinforced castors; the unit provides a safe
and affordable option for draining, transferring and evacuating oil•Designed for excellent mobility, easy bowl positioning and simple to use
gravity evacuation •Tank comes fitted with sight gauge to check waste oil level and a drum
tap to drain oil out•Not for use with fuels and corrosive media
$295.00Ex. GST $268.18 Inc.GST
Part No. 305600
Cleaning Brush Set, Steel• Ideal for small cleaning jobs, particularly in those hard to
get at places•Suitable for rust, scale and ingrained dirt removal• Each set contains one curved and one straight brush• Curved brush 220mm long
•Straight brush 200mm long
•Machine steel, nickel plated finish
•Rugged self striking mechanism, activated by downward pressure
•Precision design
•Replaceable hardened pin
•Adjustable striking force•Made in Germany
$16.95Ex. GST $15.41 Inc.GST
Part No. CND-4
Part No. Qty Part No. QtyMH004 30 HS020 30MH006 30 HS024 30HS010 30 HS028 20HS012 30 HS032 20HS016 30 Total 250
•Compact 9 drawer merchandiser•Clamp sizes and part numbers easily identified •Drawer style allows for easy access and refill•Modular units can be configured to suit individual requirements•Dimensions: 600mm (w) x 350mm (h) x 160mm (d)•Made in Australia
$239.50Ex. GST $217.73 Inc.GST
Part No. CMHS250
Hose Clamp Nut Driver•For easy installation and removal of most hose clamps•Flexible shaft allows access to difficult locations•High torque grip for positive tensioning of clamps• Includes 6mm, 7mm and 8mm sockets•Length 900mm
$9.95Ex. GST $9.05 Inc.GST
Part No. 301001
Perforated Band Clamp Merchandiser Part Stainless Steel
Automatic Centre Punches With Guard
Part No. Size Price Ex. GST
PriceInc. GST
430229 95mm $38.64 $42.50
430230 125mm $45.41 $49.95
430231 130mm $47.73 $52.50
NEW
Bearing Packer Rapid Action•Rapid action bearing packer for use with grease gun filler pump•Non threaded top cone for fast placement of bearings•Outer shaft is threaded 1/4” NPT (F) and fits onto the outlet
discharge tube of the grease filler pump•Bearing range: 12mm (1/2”) I.D. to 125mm (5”) O.D. by 10mm
(3/8”) to 50mm (2”) height
$49.95Ex. GST $45.41 Inc.GST
Part No. 305097
NEW NEW
Contents
Contents
•Comfortable, sturdy and simple “L” angled cutting guide tool• Ideal for use as a circular saw guide or for general measuring out work•Rubber inter-mould to firmly grip work surface while avoiding damage•Stainless steel guide frame for accurate line marking and 150mm graduated straight edge•Right angle accuracy: within 0.3mm for 150mm•Double sided function is suitable for both left and right handed users•Manufactured from die cast aluminium•Made in Japan
$64.95Ex. GST $59.05 Inc.GST
Part No. 321930
Circular Saw Guide SquareNEW
Premiumquality.Extensiverange.We’vegotitcovered.
11Available 1st October - 31st December 2013 www.tridon.com.au
Flaring Tool
Variable Length Vertical Lift Pump “Ezee Flo” Down-Stroke •A versatile hand lift pump engineered for
use on 20 litre containers with seven adaptors to suit most drum types including those with Rieke or regular openingsDown stroke dispensing pump with variable length telescopic tube to suit almost all drums on the market
•Suitable for transferring engine oils, gear oils, diesel, 100% antifreeze and light fuels
•Heavy duty steel suction tube with the pump head made from high density polyethylene
• Interchangeable bung adaptors. The standard bung can be slid over the pump when using on containers with plastic Rieke spout
•Not recommended for use with water based and other corrosive materials
$49.95Ex. GST $45.41 Inc.GST
Part No. 305500
$529.50Ex. GST $481.36 Inc.GST
Part No. 027000
Breaker Bars Ratchet Head
Part No. Squre Drive AdjustableLength
Price ex. GST
Price inc. GST
321250 1/2” 420-610mm $72.68 $79.95
321251 3/4” 610-915mm $135.91 $149.50
Chisel and Punch Set•Comprehensive multi function chisel and punch sets
complete with an assortment of attachments•12 piece set•Contains: 6mm cape chisel, 3 & 5mm tapered punches,
5 assorted flat chisels, 5 & 6mm pin punches, 3 & 6mm tapered drift and protective handle
$68.95Ex. GST $62.68 Inc.GST
Part No. 301921
Air Gun/Power Tool Holder•Handy storage units for impact
wrench and sockets in the workshop
•Holds one impact air wrench and four sockets
•Magnets on reverse side attach to metal holdings
$32.50Ex. GST $29.55 Inc.GST
Part No. 301448
Infrared Thermometer•Portable and easy to use tool designed specifically for point and
shoot temperature taking•Features laser sighting for simple one hand operation, backlit LCD
display, auto-hold function and auto power off • Ideal for automotive, plumbing or industrial use•Range: 30ºC to 550ºC
$107.50Ex. GST $97.93 Inc.GST
Part No. 321500
Air Operated Brake PistonWind Back Tool• Air operated ram applies pressure to the caliper piston while the
handle is rotated by hand• Easy to use – operates on standard workshop air•Reversible – suitable for both left and right hand threads.
$99.50Ex. GST $90.45 Inc.GST
Part No. 036198
Pulley Holding Tools•Designed for removing or replacing pulleys on water
pumps, alternators, power steering pumps etc.
•Can also be used to rotate camshafts and crankshafts
•Tighter hold than with a normal strap wrench, therefore these tools can also be used to remove oil and fuel filters where access permits
•Handle 365m; Belt 800mml Made in England
Part No. Description Price Ex. GST
Price Inc. GST
077405 V Belt $20.00 $35.00
077410 Grooved $20.00 $35.00
Cam Belt Pulley Puller•Removes pulleys by using the holes in the
pulley, to avoid risk of damage
•Special compact design allows for in-situ use
•Adjustable legs allow for variable diameters of pulley
$49.95Ex. GST $45.41 Inc.GST
Part No. 077420
NEW
NEW
NEW
•Adjustable length high torque breaker bars provide greater flexibility and versatility•Ratcheting head with high torque capabilities allows for use in heavier duty applications
Adjustable Length & High Torque
•This popular flaring tool has become the industry standard due to its speed, accuracy and reliability. Produces convex and double lap fl ares to SAE and DIN standards on automotive brake and clutch pipes. ‘Dial a size’ punch turret with OP1 and OP2 punches positioned next to each other
•Lever cam operated for quick and easy flaring
•Automatic punch extraction
•Screw clamp for accurate die alignment